Volume control problem with 30GB iPod 3G, Universal Dock, and Apple Remote

I just hooked up my 30GB iPod 3G to the Universal Doc and tried the my new Apple remote. The only buttons on the remote that work in controlling my iPod while on the dock are the play/pause and the skip forward and back buttons.
For some reason the volume up and down buttons don't adjust the volume on my iPod while it's on the dock. Any ideas? Shouldn't the volume up and down work? Or do they only work on the newer iPods?
Any info appreciated.
17' Aluminum Powerbook Mac OS X (10.4.3) 30GB iPod 3G
17' Aluminum Powerbook Mac OS X (10.4.3)

btabz,
Thanks for your response. No the iPod doesn't respond at all--the volume display doesn't come up or change.
When I press the play/pause or either skip forward or back on the remote, the iPod, while on the dock, lights up and responds to the command as it should. But when I press volume up or down on the remote the iPod does not respond at all.
According to Apple's store info on the remote, the volume up/down controls should work. I am wondering if maybe it doesn't work with the 3Gs for some reason. But if that is the case, Apple should indicate that. It is kind of frustrating to not be able to adjust the volume.
Thanks,
gerb38
17' Aluminum Powerbook Mac OS X (10.4.3)
17' Aluminum Powerbook Mac OS X (10.4.3) 30GB 3G iPod

Similar Messages

Universal Dock and Apple Remote

I have an iMac and iPod Video with a Universal Dock connected to the iMac. When I use my iMac apple remote it also fires up the iPod in the dock. I only want the iMac to respond to the remote. How do I turn off or un-pair the remote from the Universal Dock?

I did, it did not solve the problem. The remote is paired to my iMac but it still activates my iPod (universal dock).

Mini with new universal dock and IR remote

I just got a new universal dock and IR remote for use with a Mini. It seems like the only controls on the remote that work are Next, Prev, and Play/Pause. Neither of the Volume buttons or the Menu button do anything. Is this normal? Is there any advanced information available for the new IR remote and dock (the manuals aren't very helpful)?

The description would make you think otherwise...
"Control your iPod from afar. Play, pause, control volume and skip forward and back between songs from across the room with the Apple Remote."
It goes on to say that the Menu button is for use with the Mac.
"When you click the Apple Remote's Menu button, your desktop fades and Front Row's sleek interface takes its place to give you control over your music in iTunes, your photos in iPhoto, the videos in your Movies folder and whatever DVDs you want to play."

No Video via Universal Dock and Apple AV Cable 5.5g iPod

I recently tried outputting video from my 5.5g iPod via the Univrsal Dock and Apple's AV cable. When the iPod is docked, I get sound through the TV, but no video. If I move the AV cable to the headphone jack on the iPod itself, I then get Video and Audio. Does anyone have any insight into this? I am using the iPod specific AV cable and not the iBook AV cable like on other postings.

I am sorry that this seems to have gotten confusing. I hope this makes more sense.
Only iPod AV cable (RCA video, audio left, audio right) from Universal Dock to TV = No Video, Yes Audio. No SVHS cable from dock being used.
Only iPod AV cable from iPod’s headphone jack to TV = Yes Video and Audio. No SVHS cable being used.
Is the universal dock supposed to be used with an SVHS cable and Audio via the AV Cable for connection to a TV? I did not try that as my SVHS port is taken, but I might give it a whirl. (The video settings were set correctly to TV Out = On and NTSC.)
Black Macbook Mac OS X (10.4.7) Mac Mini (Intel)
Black Macbook Mac OS X (10.4.7) Mac Mini (Intel)

Problem with 30gb iPod...

Hello there. I hope someone can help me here. I dont really know what's wrong with my iPod. The sound coming out of the earphones is not balanced. The sound coming out of the left earphone is louder than the right. I already tried 4 different earphones but no luck. I already restored, reset the ipod using the ipod software.
Please help me! Thanks!

Will the warranty cover this? I dont think I did this by accident. Didnt misused it (as a matter of fact I havent removed the protector, had this for almost 5 months). It's stored in a hard case. I hope apple can help me with this

Problem with ipod dock and apple remote

I have a problem with my apple remote and my 5th gen ipod on a dock. I set it up and plug it into a TV, yet when i get into a music video playlist- it will only play 4 songs (the same ones) and then go back to the song selection screen. The same thing happens in the movie "tab" as well.
Any ideas?

btabz,
Thanks for your response. No the iPod doesn't respond at all--the volume display doesn't come up or change.
When I press the play/pause or either skip forward or back on the remote, the iPod, while on the dock, lights up and responds to the command as it should. But when I press volume up or down on the remote the iPod does not respond at all.
According to Apple's store info on the remote, the volume up/down controls should work. I am wondering if maybe it doesn't work with the 3Gs for some reason. But if that is the case, Apple should indicate that. It is kind of frustrating to not be able to adjust the volume.
Thanks,
gerb38
17' Aluminum Powerbook Mac OS X (10.4.3)
17' Aluminum Powerbook Mac OS X (10.4.3) 30GB 3G iPod

Problem with 30gb ipod-itunes 8 compatibility

i updated my iTunes version 7 to 8 recently then after which my iPod 30 Gb version 1.3 got problems when i sync it with iTunes. Some files doesn't sync, it's previous content got corrupted ouch ! Pls. help. really need help i've been trying to fix this for 3 days but still can't find solutions = (.

Will the warranty cover this? I dont think I did this by accident. Didnt misused it (as a matter of fact I havent removed the protector, had this for almost 5 months). It's stored in a hard case. I hope apple can help me with this

Problem with Time Machine/Finder not finding and (keeping) remote drive

I have a Mac Pro and hooked 2 Western Digital My Book 750GB drives via Firewire onto it to use as my time machine backup for the two MBP's in the house.
The problem I run into may be more network related than Time Machine related. I have the file sharing turned on in Mac OS 10.5.2. I am able to select Mac Pro in Finder on each MBP and then under that select my Time Machine drive. Then within Time Machine I can select the My Book as my Time Machine drive. At this point I have no problem using Time Machine.
Where the problem occurs is if I use Finder to browse other drives such as an Internal Drive I have in my MBP or my Mac Mini's drive it no longer can find the Time Machine drive. It just is like it loses sight of it somehow. All I need to do is once again go to Finder/Mac Pro and then select the specific Time Machine drive and then Time Machine is fine again.
How can I get around this? It seems i have to make some type of permanent logon or so to this drive.

1. try plugging in directly (think you did this already)
2. try a different cable - switch to the one you know works.
3. try a different port on the case.
4. does the faulty one power up at all? can you hear the drive spinning?
5. try switching to the good power adapter if you are not seeing action under #4.
there may also be a reset button on the board or case.
if these are not working, then the bridgeboard has died in the case. there is a board that the drive plugs into that gives you the firewire, usb connections, etc. the drive likely hasn't failed, you just need a new bridgeboard or case, as I doubt maxtor will sell you just that part. the drive can be pulled & put into another case.
check out macsales.com if you need a new case.

Universal Dock and signals

This is a two part question (and pardon my lack of correct terminology):
1) I am planning to buy the newer universal dock and apple remote to hook up my Ipod to my stereo. When I do this, would the volume be totally controlled by my stereo (similar to all other components)?
2) Related to #1, is the signal that come out of the bottom connector of the Ipod line, variable, or amplified (maybe incorrect terminology)? My hope is that it is NOT amplified so it will provide the cleanest signal to my stereo possible.
Thanks in advance.

To answer your question about number 2, the signal that comes out is not amplified. It is a clean signal that is not distorted or helped. This is different than the signal that come out of the headphone jack which has some amplification (obviously because of the headphones). I hope this helps. If you are wondering about distortion when being played on your stereo, I would use the dock or a signal that comes out of the base. In my untechnical opinion, this would be the better signal. Of course, I am not an electrical engineer, so any electrical engineers please correct me. I hope this helps.

Hi all I have a problem with my ipod touch 4g

hi all I have a problem with my ipod touch 4g update and does not let either turn left stays in the loop of the block when I try to update the error stays in 3914, I looked at the host file and everything is in order any one could help me?

I think you meant 3194
3194
See:
iOS: Restore error 3194 or 'This device isn't eligible for the requested build'
How to Fix iTunes Error 3194?
Fix Error 3194 from iTunes during iPhone restore
Try on another computer

Universal dock and sector adapter compatibility

Hi,
is someone aware of compatibility issues between Apple Universal Dock and Apple sector adapter (plugged in the wall)?
I have bought my dock in the US and my adapter is French. I cannot charge my iPod through the dock when it is plugged to the sector adapter. Works fine when I plug the dock to my computer through USB.
Is this normal (maybe the dock are not the same in all the countries) or does my dock have a problem?
(I had posted a somewhat similar question on the iPod touch forum but I guess that this one is more adapted).
Thanks.

I have exact the same issue with the Apple universal dock except it is with a "made for ipod" product.
If I connect to Ipod directly it charges.
If I connect to dock and put Ipod on the dock, no go.
Anybody have the same issue?
Cheers
Cro

TS1382 Can my iPod Classic 160GB model MB565LL version 2.0.1 Mac be controlled with my Apple Remote if it is connected to the universal dock and connected to my stereo system

Can my iPod Classic 160GB model MB565LL version 2.0.1 Mac be controlled with my Apple Remote if it is connected to the universal dock and connected to my stereo system

Read this Apple Support Article on Apple REMOTE
Good luck!

Can my iPod Classic 160GB model MB565LL version 2.0.1 Mac be controlled with my Apple Remote if it is connected to the universal dock and connected to my stereo system

Can my iPod Classic 160GB model MB565LL version 2.0.1 Mac be controlled with my Apple Remote if it is connected to the universal dock and connected to my stereo system

Read this Apple Support Article on Apple REMOTE
Good luck!

Ipod Classic 80gb won´t work with apple universal dock and remote

I own 2 ipods a 5th generation 60gb and an ipod classic 60gb. I've just bought an apple universal dock with remote and the original apple component and composite AV cables. I connected the universal dock to my TV via the composite cable, with my ipod 5th gen I can watch videos on the TV and control the ipod with the apple remote but when I connect my ipod classic to the universal dock it will charge but I can´t get any video out or control the ipod with the remote. It's as if the ipod classic doesn't recognize the universal dock and it keeps showing the connect the video accessory screen, even when i tried using the apple component AV cable. I dont think the problem is with the universal dock because it works fine with my Ipod video 60gb, but with my Ipod Classic 80gb the remote control and video out won't work at all, i can´t even control the playback of audio playlists. Does anyone know why that is happenning? Please help me!

I have the Classic 80gb also...same probem. I retuned the Apple Universal Dock and purchased one that was half the price. Pluged it in and it works perfectly! So my advice would be to save some money and get products that work.

Another volume control problem after installing new software

I'm having a different volume control problem than the previous poster.
When I turn my ipod touch on, the volume control stays on the screen. I can't do anything to get rid of it. When I go into settings/sounds, the control goes away on the screen, but it will not let me turn the volume up. When I try to listen to music through my headphones, I can turn the volume up but then it automatically turns itself down. The same thing happens when I try to turn the volume up from the side control. It worked fine this morning before I installed the new software and now it's acting buggy. Any ideas on how to fix this?

Friend should do an update again your team blackberry.
Remember to make a backup with Desktop Manager and the BlackBerry protect
Having BBSack to apply wipe, factory reset wipe more, following which you do a software update via Loader.
Software For BlackBerry® Torch™ 9800 smartphone
BlackBerry Handheld Software v6.0.0.3170 (Multilanguage)
Package Version: 6.0.0.3170
Consisting of:
Applications: 6.0.0.756
Software Platform: 6.6.0.252
File name: 9800M_PBr6.0.0_rel3170_PL6.6.0.252_A6.0.0.756_Vodafone_Spain.exe
File size: 171.22MB
https://swdownloads.blackberry.com/Downloads/entry.do?code=15D4E891D784977CACBFCBB00C48F133
Regards.
Kudos ** Do not forget to give those people who help and advise you regarding your questions ** Can
Accept as Solution to ** Comments **
@gutijose14
BBM Channels PIN: C0007093A
Do not forget to give LIKE Those people who help you and advise you about your doubts. if the review has been SOLVED** # 4LL #ÉliteRoad Make a backup of your BlackBerry
BlackBerry Protect and BlackBerry Link constantly. #ichooseBlackBerry10 Gutijose14 Forums Veteran I

Volume control problem with 30GB iPod 3G, Universal Dock, and Apple Remote

Similar Messages

Maybe you are looking for