Volume control (slider) in CP 5

Hi, I've just started testing Captivate 5. I would like to check if it will be suitable for my needs (making software demonstrations at a wiki (Mediawiki software).
I've been searching for a volume control (not on/off button, but a slider). I've found that it can be downloaded from a third-party supplier for CP 2 and CP 3, but I'm still searching for a solution for CP 5. Any clues out there?
(I'm also looking for a way to control the size of the swf video in the wiki, I'm posting that as a separate thread)
In advance, thanks a lot!
--bj

Hello,
In Captivate 5 there is a volume control widget. Did you try that? Open the Widget panel (or the Widget Workspace), click on the button Browse, you'll find it in the Gallery, Widgets folder.
Lilybiri

Similar Messages

  • Dv7t-3300 volume control slider bar not working

    I have a dv7t-3300 and all of a sudden the volume control slider has stopped working.  It's stuck displaying mute although the computer itself does have sound.  I tried performing a cold reset as some people on line have suggested to no avail.  Is there any possible resetting that can fix it?

    Hi gnobel,
    Welcome to the HP Forums!   I understand that your volume button is stuck and will not slide. I will try my best to help you with this issue. I suggest Performing a Hard Reset or Forced Reset on the Notebook.  I also suggest Downloading or Updating Software and Drivers for HP Computers.
    I hope this helps, let me know how it goes.
    Thank you,
    I worked on behalf of HP.

  • Volume control slider position not saved at exit

    Just upgraded to 6.0.2.23 and when I started it for the first time, I noticed that the volume slider was pegged at max. Thought nothing of it and turned it down. The next day, when I started iTunes, I noticed that it was pegged again.
    It appears to me that the position of the control is not saved any more. It was in the previous version and this is new.

    Hello,
    In Captivate 5 there is a volume control widget. Did you try that? Open the Widget panel (or the Widget Workspace), click on the button Browse, you'll find it in the Gallery, Widgets folder.
    Lilybiri

  • Why does my ipod touch (2nd Gen) 32G randomly stop playing while at the same time the volume control slider dissappears?

    It randomly stops playing after as little as 7 seconds and as much as 2 minutes.   To resolve the problem I began removing and reinserting headphone jack.  This sometimes rectified the issue, but inevitably it would stop playing again.  I have blown air into the headphone jack receptical and powered down the product but neither action has permanently corrected the problem. 
    It has been a couple of months since it was last restored.
    Any thought on why this has just started to happen.  Does it need to be repaired by Apple?  The item was purchased in Sept 2009.

    It is possible you have a faulty lock/power button. One of my friends iPods did this. See if a faulty lock/power button is covered by your warranty if you don't have a warranty you might have to pay a pretty penny to get it fixed. When the screen flashes does it go black and come back at the lockscreen? If so it is very much the lock/power button.

  • How to restore the volume control while playing music in iTunes

    How do I recover the volume control (slider at the bottom of the screen) in iTunes when playing music? After I plugged the device into an iHome speaker, the volume control dissappeared.

    generdude,
    Not that I know of, but you can turn it off completely by going to System Preferences...>Sound>Sound Effects>Alert volume: (Uncheck) Play feedback when volume is changed.
    ;~)

  • How does iTunes volume control affect digital output?

    I'm using iTunes on a Mini with an external USB DAC. The volume control and equalizer inside iTunes affects the volume so it must be processing the digital data in some fashion.
    It doesn't appear you can disable the volume control so how do I know what, if any volume setting outputs a digital stream that has not been processed by iTunes?
    intel mini   Mac OS X (10.4.7)   external Scott Nixon usb dac

    I have a scott nixon and I have the same quesstion. Does the volume control slider on itune work in digital domain? if so, does it work by increasing/reducing the bit rate?

  • Sudden volume control/sound bug!

    I began experiencing this bug tonight and I'm not sure if it is a virus?
    I was watching a video on youtube and suddenly noticed that my volume was cutting in and out. After closing firefox, I could hear the volume popping in and out and noticed that the volume icon in the toolbar was going from medium to high and back. When I try to use the volume control slider, it goes from being whited out (can't move it) and back to normal, and when I try to use the volume keys, I get a circle and slash to show that I cannot manipulate the sound.
    I took screenshots of this in case I needed to show someone.
    It does this randomly. Sometimes it's normal, sometimes it's "stuck" and I can't get any sound, and then randomly it will pop in and out again and again. This has never happened before.
    I am using a 17" macbook pro (silver keys, not the newest one). The keys on the keyboard are not stuck, they function properly and like normal.
    I have tried:
    verify & repair permissions in disk utility
    run scripts
    run onyx and cocktail
    cleared all caches
    installed newest version of osx
    restarted and shut down countless times
    cleaned keyboard just in case
    If anyone has heard of this or has any suggestions PLEASE let me know. I baby this computer and I'm at my wits end!

    If and only If it's a Logic Board problem, the time between symptoms appearing to failure of hardware can vary.
    NOTE: I thought only this might be the problem because I've seen it happen a number of times, particularly in notebooks (because the hardware can become damaged more easily)
    I can provide no definite time-frame. but, I would suggest having the machine checked by an Apple service technician, or center; as always its better to be safe than sorry.
    Logic board (i.e motherboard) failures basically mean the core hardware dies, everything else, drives, RAM etc should remain unharmed. You may lose some core settings, date/time etc...
    Hope this is useful and good luck!
    Kind Regards,
    Peter.

  • More finegrained audio volume control? (Harman/Kardon USB SoundSticks)

    Hi,
    I've been asking this question for every major release since 10.2 and I am near to just give up on it. I use the Harman/Kardon SoundSticks (the older USB model, not version 2 with the regular audio jack) and since 10.2 they are simply too loud. Since the speakers themselves do not have any volume control knob it has to be a software solution.
    With OS X's sound volume keys I can only use "1 bar of volume" when in front of my Mac and even that is too loud. The only solution is to turn it off completely or to lower it a little bit via the volume control slider in the menu bar. This results in approximately "3/4 bar of volume". Moving it just a tiny bit down from here results in muted audio.
    Is there any way to just reduce the overall audio volume via software? Sure, I can do it app by app, but I really need a systemwide solution!
    Thanks
    Björn

    Then maybe you're really lucky or just like the high volume setting. This problem exists for years now and it's definitely not caused by my hardware/software. It was the same with the following Macs:
    - Power Mac G4
    - iBook G3
    - iBook G4
    - Power Mac G4 Cube
    - PowerBook G4 Ti
    - PowerBook G4 Alu
    - MacBook Pro CD
    - MacBook Pro C2D
    And it happened on all releases of OS X from 10.2 up to 10.5. All versions were installed clean without upgrading so I really have reason to believe it's Apple's sound driver for the SoundSticks...
    Björn

  • I have lost sound on my iPad in apps unless I use headphones ,does anyone know how to get sound back without them .I have used the mute volume on the bar at bottom of screen and the slider volume control there only shows when headphones are plugged in !

    I have lost sound on my iPad in apps unless I use headphones ,does anyone know how to get sound back without them .I have used the mute volume on the bar at bottom of screen and the slider volume control there only shows when headphones are plugged in !
    I also tried resetting settings all to no avail ...I looked up some advice and watched utube video advice on how to fix without success..
    The volume control button on side does not work ,I got the iPad last August and wonder if it is a fault that means I must return it for replacement from where it was purchased ?

    The Retrospect you used way back when is no longer around. The company was sold and that company produced a new version of Retrospect - Retrospect 8.x
    So, as you've been told, you would have to be running a Tiger system with an old version of Retrospect software (5.x or 6.x - you would need to know) assuming you can find the software.
    As best I can remember you cannot extract files from a Retrospect backup except using the software since Retrospect did not normally make a file by file backup rather it created an archive of the files in the backup. I'm assuming that the EMC/Retrospect people have told you that old Retrospect backups are not accessible by Retrospect 8.x?

  • I can't get the volume to work when I watch a you tube video, there's no volume slide under the play button, and my volume control on my I pad won't do anything either, but the volume of all my alarms and sounds works perfect, what can I do??

    I can't get the volume to work when I watch a you tube video, there's no volume slide under the play button and my volume control on my I pad don't do anything to help, but yet my volume works perfect on everything else, what can I do???

    do u have your ipad doing airplay because that could happen

  • Just installed ios 7 on my 4s, and I have two issues: 1) control centre: the music controls do not work, only the volume adjust slider works; 2) in mail, where do you find the setting to control how many messages you want your inbox to retain?

    Just installed ios 7 on my 4s, and I have two issues: 1) control centre: the music controls do not work, only the volume adjust slider works; 2) in mail, where do you find the setting to control how many messages you want your inbox to retain?

    Same problem here on my 4s: Control center music controls do not work.
    Since this thread has two issues, I'm going to start a new one with only the music control bug. Topic: iOS 7 Control Center Music Controls Not Working On iPhone 4s

  • When unlocking my iphone with the camera slide, my volume controls won't work on video playbacks.  However, if I unlock the phone normally and open the camera roll I am able to watch my videos and control the volume.  Anyone else notice this?

    When unlocking my iphone 5 with the camera slide, my volume controls won't work on video playbacks.  However, if I unlock the phone normally and open the camera roll I am able to watch my videos with the control of the volume.  Anyone else notice this?
    Thank you.

    Who can help me what are the symbols of a moon and a lock with a partial circle around it not allowing me to turn on or off my phone

  • Hi People. I was doing my walk and listening to music using my 4s when in the middle of a song, the volume control would just automatically slide back to zero like it has a mind of its own. What gives?

    Hi People. I was doing my walk and listening to music using my 4s when in the middle of a song, the volume control would just automatically slide back to zero like it has a mind of its own. What gives?

    Hi djblue1969,
    I see that you may be having issues with your volume buttons on your iPhone. Here is an article for you that will help you troubleshoot this issue:
    Get help with buttons and switches on your iPhone, iPad, or iPod touch - Apple Support
    http://support.apple.com/en-us/HT203017
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • HT2188 6.0 (10a403) Loss of Volume control and Volume slider in music

    I have 2 iphone 4 and upgraded them to os6, one phone updated correctly and is working fine with no problems. The other phone is giving me nothing but problems. I intermitently lose use of my volume controls and when this happens the volume slider dissappears from the music app. even closing the phone and opening it does not bring these controls back but then all of a sudden they will appear only to dissappear as quickly, nothing I do seems to bring them back as I can leave the phone and when I go back to it they will be there. I also lose the click sounds from the keyboard. I have tried everything I can think of by erasing all content and settings 3 times, hard resetting many times. Any idea's?

    I still have a 3GS and had NO intention of updating to iOS6 for the fear of the maps issue (because I use maps so frequently) and that it would **** near render my phone usless. But then I was unable to manage my Voice memos (also something I use frequently) so I sucked it up and upgraded yesterday.
    And now the only volume control that I have seems to be in my iTunes. Can barely hear a phone call or voicemail and cannot adjust the volume at all, not even with a headset on. Fix this, Apple. Fix it NOW!!!

  • Unable to use volume control ipod itouch 5.1.1

    hello,
    itouch didn't have a problem with volume slider until recently. through other websites, i have since located the volume slider in music playing mode by double tapping the home button and scrolling to the left but it lacks any button to scroll to increase the volume. music plays well via a sound dock but that has it's own volume controls. sometimes when docking it plays through the handset speakers until seated correctly so i know the internal speakers do work.
    any light on the matter would be very much appreciated!!!

    I just got off the phone with a friend of mine who was having the same problem as you. Although you say the camera playback is set properly, please recheck this. go into your camera's playback menu>menu>standard set>VCR HDV/DV. Unplug your firewire from the camera. Make sure camera is set to HDV NOT auto. replace firewire cable. Now open FCP. Go in Audio/video settings>A/V devices (farthest tab on right). In box for playback edit to tape different from video output (make sure it's checked) mirrored (checked) Video playback 1080i50, Audio HDV. I hope that works now.
    Steve

Maybe you are looking for

  • Calling sql dts from java

    I'm able to connect to my sql database and call a stored procedure, but is there any way to call dts? here is how i'm accessing the stored procedures:      Class t = Class.forName("com.microsoft.jdbc.sqlserver.SQLServerDriver");      Connection conn

  • I'm trying to title a movie event...won't let me.  Do I need to first move it to project library?  Can't figure that out.

    I'm trying to title a movie event...won't let me.  Do I need to first move it to project library?  Can't figure that out.

  • Add OU(Organizational Unit)  to active directory plugin

    Hi Guys, i am using Ad plugin with BOE 3.1 to authenticate Active directory users, i am able to map AD Groups while configuring the ad plugin. my question is, is it possible to map OU instead of the AD Groups ? in my production active directry i have

  • Mac Standalone LabVIEW App - Include Visa & LabvIEW Run-time

    Hello All, I've used LabVIEW for over a decade but only for Windows, just getting into LabVIEW for mac, so please pardon any ignorant questions.  I am developing a very simple project to be deployed stand-alone that needs LV Run-time and NI Visa. My

  • Declaring cursor

    Hello everyone, I need some help with the SQL query posted below: SQL> DECLARE cursor resolverate is 2 select e.hcfadrgcode, f.insplancode, sum(f.TOTALPAYMENTS)/sum(f.totalactualcharges) rr 3 from encounter e, encounterfinancialrecord f 4 where e.enc