Volume controls only control headphone and not speakers

When I use the volume controls in settings or on the side of the iPad, only the headphone volume changes. How do I adjust the speaker volume instead of the headphone volume?

Does the speaker work at all? Are you getting sound through it? If the speaker is working, but the volume control doesn't work, try resetting the iPad.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If that fails, provide some detailed information about the problem if there is anything more that you can share... does it happen in all apps? Is it random? etc. etc....

Similar Messages

No volume control elements and/or devices found

Hi, I recently installed Arch Linux and I followed the tutorials on how to configure it. At this moment I have Gnome installed and it is working fine, I only have one problem.
Every time if I try to access volume control I get the following error:
"No volume control elements and/or devices found"
I'm relatively new to Linux so it might be me just being stupid(Maybe I just don't have the right packages installed) but I've searched the web and I didn't find anything that could help, I also searched this site but there are only a few things about sound problems. I think the problem is caused because Linux is not detecting my sound card (its an on board sound card) or maybe I have not given the command to detect it/activate it. In Google I've found that 'lsmod' and 'lspci' commands are for detecting drivers, so I executed those in my terminal and put them here, I hope this might help fixing my problem.
Module Size Used by
ipv6 252608 8
nvidia 6828532 22
jfs 172540 1
ext2 57352 1
snd_seq_oss 29184 0
snd_seq_midi_event 6528 1 snd_seq_oss
snd_seq 46672 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 6796 2 snd_seq_oss,snd_seq
ppdev 7556 0
eth1394 16772 0
lp 9604 0
snd_intel8x0 28828 0
rtc 10416 0
ppp_generic 23444 0
snd_pcm_oss 39072 0
snd_mixer_oss 14464 1 snd_pcm_oss
sg 26652 0
usbhid 34592 0
hid 25088 1 usbhid
slhc 6272 1 ppp_generic
shpchp 29588 0
pci_hotplug 27976 1 shpchp
ff_memless 5256 1 usbhid
parport_pc 35940 1
tsdev 6336 0
parport 31176 3 ppdev,lp,parport_pc
i2c_sis96x 5124 0
i2c_core 17792 2 nvidia,i2c_sis96x
snd_intel8x0m 14476 0
snd_ac97_codec 91940 2 snd_intel8x0,snd_intel8x0m
ac97_bus 2432 1 snd_ac97_codec
snd_pcm 68484 4 snd_intel8x0,snd_pcm_oss,snd_intel8x0m,snd_ac97_codec
snd_timer 18820 2 snd_seq,snd_pcm
snd 43492 10 snd_seq_oss,snd_seq,snd_seq_device,snd_intel8x0,snd_pcm_oss,snd_mixer_oss,snd_intel8x0m,snd_ac97_codec,snd_pcm,snd_timer
pcspkr 2816 0
evdev 8192 0
ohci1394 31920 0
ieee1394 84056 2 eth1394,ohci1394
sis_agp 6404 1
agpgart 26200 2 nvidia,sis_agp
soundcore 6496 1 snd
snd_page_alloc 7816 3 snd_intel8x0,snd_intel8x0m,snd_pcm
8139too 22912 0
mii 4992 1 8139too
ext3 119688 1
jbd 55336 1 ext3
mbcache 7044 2 ext2,ext3
ehci_hcd 30092 0
sr_mod 14372 0
cdrom 34464 1 sr_mod
sd_mod 16768 5
ohci_hcd 18948 0
usbcore 115464 4 usbhid,ehci_hcd,ohci_hcd
ata_generic 5380 0
pata_sis 10508 4
libata 94100 2 ata_generic,pata_sis
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 651 Host (rev 01)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP)
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS962 [MuTIOL Media IO] (rev 04)
00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller
00:02.3 FireWire (IEEE 1394): Silicon Integrated Systems [SiS] FireWire Controller
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE]
00:02.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0)
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] AC'97 Sound Controller (rev a0)
00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
00:09.0 RF controller: Advanced Micro Devices [AMD] Am 1771 MBW [Alchemy] (rev 04)
00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1)
Any help would be appreciated because this is getting very frustrating >_>
Last edited by NomenNescio (2007-04-28 10:50:10)

ryurhrt wrote:
NomenNescio wrote:
Thanks for the help, didn't get the sound to work but yet because I kinda broke my linux(wont boot)>_>
Gonna reinstall it, things usually go better the second time.
make sure u have adding the user to audio group in order to access sound device.
gpasswd -a user audio
Yes, I think that was the problem. Anyways, I reinstalled Arch Linux and everything is working fine now.

I am using Photoshop CS5 on a new iMac with a wireless keyboard. I used to be able to hit F11 to perform a custom sharpening action but now the F11 key is the volume control key and I have tried everything to disable or switch the volume key. I have also

I am using Photoshop CS5 on a new iMac with a wireless keyboard. I used to be able to hit F11 to perform a custom sharpening action but now the F11 key is the volume control key and I have tried everything to disable or switch the volume key. I have also tried assigning other function keys to initiate the action. Is there a simple solution to this? What am I missing?

Try unmounting the volume on your iMac using Disk Utility. Then mount it again. You may need to reboot the laptop or relaunch its Finder process (using the Force Quit window) after remounting the drive on your iMac. Remember that no process may be accessing any files on the drive you plan to unmount, or the unmount will fail. Unmounting and remounting an external drive on my iMac made it become visible on my MacBook Pro after it had disappeared.

Ipod is playing music out of the headphones and the speakers at the same

My ipod is playing music out of the headphones and the speakers at the same time and I can't figure out why. I reconnect the headphones and it still plays out of both...It is like it doesn't recognize that there are headphones plugged in, but yet it still plays out of them. Help would be appreciated. And the headphones are all the way plugged in

Ah my ipod is not the only one doing this obviously...i thought i was alone in this world...it still has this problem after an entire month...and no this problem has nothing to do with my computer...although sometimes plugging in the ipod to the computer eliminates the problem for a while.
Sometimes i listen to it at the loud volume that the other poster is talking about through the headphones and it will randomly recognize the headphones after about 30-60 minutes usually. but then the next day it will have the same problem

Airport utility only shows disc and not airplay

airport utility only shows disc and not airplay

Actually......IF......one is using an older 5.x version of AirPort Utility......AND.....an AirPort Express, a Music icon is displayed at the top of the screen. If you click the Music icon, there are settings to enable AirPlay and establish a password for the service.
The newer Mac 6.x and iPad and iPhone versions of AirPort Utility automatically enable AirPlay, but display no settings for this.
Since ralphington is using Mavericks (10.9.4), there are no controls for AirPlay displayed in his version of AirPort Utility.

I am able to search only by text and not by Key in filter.

We have a variable x which has bex properties in the infoobject level to
1.display: Key and Text
2.text type: long text
3.Query def filter value selection: Only values in infoprovider
4.Query Exe filter value selection: Only posted values for navigation.
in the Query designer to the object we have the same properties for 1 and 2 as above.
 On execueting the report in web, In the variable screen for x we can search for both Key and text. (we have two radio buttons for Key and text),
 Whereas in the result area for the filter for x I am able to search only by text and not by Key. I want to search by both Key and text in filter screen.
Can u suggest suitable solution for this ASAP.

I have been working on a similar problem and have found that it depends on what kind of InfoProvider you are using.
If you are using an InfoCube, the setting that seems to control this is on the maintenance screen (Admin Workbench -> {InfoProvider to be edited} -> Change -> Extras -> Structur-Specific InfoObject Properties. If you want the key and text to display on the variables screen (which you already have), make sure the 'Display' is set to "Key and Text". If you want key and text to display on the filter screen, make sure the 'F4 Query' is set to "Values in Master Data Table". (You may also have to set the characteristic to display key and text in the query, but it sounds like you already have done this.)
For an ODS, the settings are the same, but the path to get there is different. Go to Admin Workbench -> {ODS to be edited} -> Change -> {InfoObject to be edited} -> Right-click -> ODS-object Specific Properties. Same settings as above after this.
For a MultiProvider, I found that the settings on the InfoObject itself seemed to control the display on the Web, so I ended up setting: Display = "Key and Text"; Query Def Filter Value Selection = "Values in Master Data Table"; and Query Exe Filter Value Selection = "Values in Master Data Table". That may be a bit of overkill, but I wanted to be sure to get both key and text in all situations.
I also found that the settings for navigational attributes (e.g., 0PLANT__0REGION) for any kind of InfoProvider must be set at the InfoObject level (e.g., 0REGION), as above.
Even with all of this, I still have a couple of InfoObjects left that I can't get to display both key and text for some unknown reason.
Hope this helps...
Bob

What do I convert to if I only have OpenOffice and not Word?

What do I convert my pdf files to if I only have OpenOffice and not Word?

Hi sulezyf,
OpenOffice and Word documents have the same extension i.e .doc
You can convert the pdf to .doc format.

When installing iLife, can I only upgrade iPHoto and not iMovie or iDVD?

When I install iLife, Is it possible to only upgrade iPhoto and not iMovie and iDVD? I've heard the new versions of iMovie and iDVD are not as robust. If I do this, does iPhoto '08 still integrate with the last version of iDVD?

If you do a custom install you can select what gets installed
I believe that You also can move the old versions so the new versions get installed and you still have the old versions - I understand that Old Toad has numerous versions of iLife programs on his system - search the iPhoto forum for his posts to see what he has to say about that
And you can download iMovie 6 from the Apple download site - a free install for iLife '08 owners
So you can have the old and the new
LN

My iPod touch 4g has ruined 3 pairs of my headphones and my speakers aren't working, can I get it replaced for free? Or do I have to pay for it to be replaced?

My iPod touch 4g has ruined 3 pairs of my headphones and my speakers aren't working, can I get it replaced for free? Or do I have to pay for it to be replaced?

As I said in my previous reply:
If defective, Apple will exchange the iPod at no cost unless they have been abused. That applies to Apple earphones too.
Apple Retail Store - Genius Bar

My time capsule connotes only with ethernet and not wireless why?

my time capsule connotes only with ethernet and not wireless why?

Firstly, try a factory reset. This can often iron out problems like this.
Also, what generation is your TC? What version of AirPort Utility are you using?

Connect only in Bn and not in Gn

Hello
I have a Controller 5508, CAP 3501E
I have a problem, all client who connect in 802.11n connect only in Bn and not in Gn.
When I diseable the n, the same client connect in 802.11g.
Could you help me that the client can connect in Gn
Thank you
christophe

Hello
I test this
Go to Wireless > 802.11 b/g > Network.
Disable all data rates 12 Mbps and below. Make 18 as Supported and 24 as Mandatory.
but not good result
the controller version is

Yahoo Pop only retrieve inbox and not spam folder

Hi! As per the title, how do i get mail to retrieve only the inbox and not the spam folder with pop?
I assume it is a silly option i'm missing... thanks in advance!

Sorry, I misread you post. There is a feature with ATT mail that allows that. Deselete it in Settings, more options.
Change it to don't POP spam.

HT4059 Why ibooks on iphone5 share button only allows print and not, copy - mail or dropbox?

Why ibooks on iphone5 share button only allows print and not, copy - mail or dropbox?

Why ibooks on iphone5 share button only allows print and not, copy - mail or dropbox?

WHY FREE ITUNES PRODUCTS ARE AVAILABLE ONLY FOR USA AND NOT FOR OTHER USERS OUTSIDE USA

I am so impressed wit the welcome page saying "Join the conversation. Share tips and solutions with fellow Apple product users from all around the world."
Apple mentioned for their products users around the world but many of their free itunes products are available only for USA and not for the users from the other side of the globe?
Is this Apple a fair and customer oriented company or full of bias and Only money oriented company.
If apple could not make thier other FREE stuffs available outside US territory then better for thsi company to just sell their products in USA. its just so disgusting... If we need a certain apps (FREE APPS) available only for US based users.
If you think US users and other country users are paying the same prices for their iPad 3G/4G WIFI 64GB and iPhone 3G/4G 64 GB like hat I did having the 2 gadgets altogether but my investment ends to disgusting as the apple company cound not treat people equal then..... I want to return all this **** stuffs

iTunes for Different Countries
iTunes Store: Which types of items can I buy in my country?

TS1630 Hi I have a problem with my iPhone 4S, I have no sound from my speaker ,keyboard or notifications , and my volume control buttons are not working is anyone experiencing this? Any help would be great full, also I have reset the iPhone many times.

Hi I have a problem with my iPhone 4S I have no sound from my speaker , keyboard, notifications. or volume controls, I have reset my iphone many times and still the same, any advise will be greatful
Thanks

I don't think that a software update from Apple will solve the issues that you are having. You have a rogue installation. After you posted I have just done the following:
Disk Utility can verify my partitioned Volume (including my boot disk) AND REPAIR the non-boot disks on the same Volume without a glitch. It repairs the non-boot disks containing data smoothly.
I have used Mail to send some mails from some Yahoo and Hotmail accounts to my Thunderbird client containing GMail accounts - absolutely normal.
I have iLife '09 but my iMovie '09 and iPhoto '09 open in a jiffy and I see no issues here. I have 6GB RAM (Maximum) on an early 2008 Macbook Pro with a 750GB hard drive partitioned with 120GB reserved for the Boot Drive.
I am sorry that I cannot help further but I am sure there must be a way to reinstall the software without having to revert to restoring your ML backup. I have two clones and if you have such I would attempt to do that through that rather than through Time Machine - that is of course if you have a cloned drive.
Good luck!

Volume controls only control headphone and not speakers

Similar Messages

Maybe you are looking for