Volume cuts out for split second and then comes back very low

I have an old Ipod Classic that I listen to on my Bose docking station. Every now and then the sound cuts out for a split second and then continues playing only it's too low to really hear so I have to turn the volume back up.
It did this twice today when I was listening to.
It was doing this every now and then a few months back and then stopped.
Has anyone had this problem and know what could be causing it to happen?

* Bugcheck Analysis *
BAD_POOL_HEADER (19)
The pool is already corrupt at the time of the current request.
This may or may not be due to the caller.
The internal pool links must be walked to figure out a possible cause of
the problem, and then special pool applied to the suspect tags or the driver
verifier to a suspect driver.
Arguments:
Arg1: 0000000000000020, a pool block header size is corrupt.
Arg2: fffffa802224f9e0, The pool entry we were looking for within the page.
Arg3: fffffa802224fa50, The next pool entry.
Arg4: 0000000004070006, (reserved)
Debugging Details:
TRIAGER: Could not open triage file : e:\dump_analysis\program\triage\modclass.ini, error 2
BUGCHECK_STR: 0x19_20
POOL_ADDRESS: GetPointerFromAddress: unable to read from fffff800036ca100
GetUlongFromAddress: unable to read from fffff800036ca1c0
fffffa802224f9e0 Nonpaged pool
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
PROCESS_NAME: chrome.exe
++++++++++++++++++===============================++++++++++++++++++++++==========4
* Bugcheck Analysis *
VIDEO_TDR_TIMEOUT_DETECTED (117)
The display driver failed to respond in timely fashion.
(This code can never be used for real bugcheck).
Arguments:
Arg1: fffffa80262bc4e0, Optional pointer to internal TDR recovery context (TDR_RECOVERY_CONTEXT).
Arg2: fffff8800fa2be20, The pointer into responsible device driver module (e.g owner tag).
Arg3: 0000000000000000, The secondary driver specific bucketing key.
Arg4: 0000000000000000, Optional internal context dependent data.
Debugging Details:
TRIAGER: Could not open triage file : e:\dump_analysis\program\triage\modclass.ini, error 2
FAULTING_IP:
nvlddmkm+153e20
fffff880`0fa2be20 ?? ???

Similar Messages

Kdl40s5100 picture cuts out for about 1 minute then comes back

when i'm watching programs the pictuture (and sound) will cut out then return in about one minute... this will repeat itself about every 30 -45 minutes.... problem does not occur when watching videos - only cable or antenna

New pc just built and using SSD for C drive. Working great for a few days but minimal usage with just drivers and BIOS updates etc. Then yesterday I turn on pc to do a quick Google search and half way when typing a search question the keyboard entry quits and Firefox is not responding. I tried IE and the same thing happened so maybe its a Win 7 thing I use Win 7 64 Pro with 16GB Ram and i72600K. Also, yesterday was a big Windows update night so I don't know if that interfered in background. Today it happened again but after I waited and watched and hit CTRL/ALT/DEL the system came back and was not locked solid the the night before.

When my phone turns on it goes to the normal screen for 1 second and then it gets very large so you can only see a few icons

When I turn my iphone on, the usual main icon screen shows for about a second and then it blows up so you can only see a few icons at a time. How do you turn this off?

Your phone might be on Zoom somehow, try just the simple "gestures" fix
Double tap with 3 fingers on the screen, then drag down. That should at least zoom out. If that does not work, try scrolling through the screen, but using 3 fingers instead of 1.
From there you should be able to access Settings>General>Accessibility>Zoom>OFF
Hope this helps

New W530 Owner - Can I move down to W7 for a while and then come back?

I have a full Windows 7 license and think I would prefer to move down to Windows 7 for a while and have the option to come back to 8 later. My understanding is that 8's key is in the bios.
If I move down to W7 will it install normally?
If I later want to move back to W8 can I install that from any Win 8 Pro install media and it will just recognize the key at that time?
Thanks!

http://www.howtogeek.com/133168/how-to-downgrade-windows-8-pro-to-windows-7/
http://www.infoworld.com/t/microsoft-windows/how-downgrade-windows-7-210685
W520 4270CTO i7-2820QM Quadro2000M 1920x1080 Display 16GB RAM 2x240GB Intel 510 SSDs (RAID 0) - BIOS 1.42 - PCMark7:4,568
Samsung Series 9 15-inch NP900X4C-A03US - PCMark7: 4674

For everywebsite I open , first thing it does just freezes for a 10 to 15 seconds and then comes back. What the hell is that, from 3.5 to latest version firefox sucks , I am feeling IE is much better atleast it used to crash or show the debug error

there is a pause when I start typing. All the time it freezes.
One year back firefox was awesome , what happened to you guys .
Get on your feet and bounce back otherwise your re going to lose your share to chrome , safari or opera

The default of the pref network.http.max-connections has been increased from 30 to 256 in Firefox 6+ versions.
Try to decrease the value of the pref <b>network.http.max-connections</b> from 256 to 30 as used in Firefox 3 versions.
*https://support.mozilla.com/kb/Firefox+never+finishes+loading+certain+websites
See also:
*http://blog.bonardo.net/2011/09/30/is-your-firefor-freezing-at-regular-intervals
*Places Maintenance: https://addons.mozilla.org/firefox/addon/places-maintenance/

The calendar icon on my iphone 6 shows that I have 2 items in my inbox but when I click on it it does not open the inbox but goes black for a second and then returns to iphone

The calendar icon on my iphone 6 shows that I have 2 items in my inbox but when I click on it it takes me to the full year calendar, at bottom of screen it says Inbox (2) - when i click on that the screen goes black for a second and then defaults back to the home screen. Have tried everything, rebooting, reinstalling, refreshing - very frustrating - can someone help?
Thanks

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

HDMI output cuts out and then comes back, any ideas?

Hi all.
I have a two Dell U2412Ms connected to my MacBook Pro Retina. One is connected via a Displayport connection and the other via the HDMI. I used to have them both connected to the Displayport conenctors but have recently run a cable into my office and now have the ethernet dongle connected to one of the Thunderbolt ports.
Since connecting a screen to the HDMI port, I've noticed that it does something odd from time to time. The screen connected to the HDMI port will go off for a couple of seconds, and then come back on again. It tends to only do this once per 'session' of me using the system. Most times when the screen comes back on, it is fine - but once it came back on the screen was going bananas. It appeared to be mostly grey, but looking closer revealed that all the pixels were going nuts, like a swarm of flies - and there was all sorts of colours going on! I had to unplug the HDMI connection (which caused my windows to move around) and then reconnect it, and then it was fine.
This only happens when using the HDMI port, and is not the monitor at fault - I eliminated it by swapping the screens over so that the other one was using the HDMI .. and it still happened!

As it turns out, the USB failed. The Apple people kept my PB and sent it for repair.
I dropped by the genius bar and left it with them on Dec 14 being told it would take 10 business days or so to get it back.
My trackpad button was very stiff, it stuck and had to press harder than normal to click. This was in effect since I took it out of the box when I bought it. Never bothered as I use a Bluetooth Apple mouse. Now that they kept it for repair for the USB port, they will also fix the trackpad.

Macbook Pro freezes, shuts off for 10 seconds, and then returns to normal

My 13.3" Macbook Pro has this issue of shutting off for 10 seconds and then turns back on to normal. Usually it happens whenever I wake the laptop with the lid open, whenever I open the lid "too fast" from clam shell sleep, and whenever I reopen the lid after when I realized that I needed to check something else. Every time I start using the Macbook Pro from these situations, everything works fine for about 20 seconds and then suddenly everything freezes and shuts off temporarily. Then after about 10 seconds, everything turns back on again. I do not know why this occurs, but I had this issue the 3rd week I purchased this. Is this a normal thing or is this an issue with possibly the motherboard?

take a look at this topic, maybe will help:
http://discussions.apple.com/thread.jspa?threadID=2420192&tstart=15

Trying to download photoshop but when I sign in it loads for a second and then says "You've been signed out".

Trying to download photoshop but when I sign in it loads for a second and then says "You've been signed out".

You are no longer signed into your Creative Cloud applications

I have used Final Cut Pro 7 for about a year. Two weeks ago when I tried to open it, it opened for 15 seconds and then the icon disappeared. I have tried to reinstall and it didnt help. any one has similar case or can help?

I have used Final Cut Pro 7 for about a year. Two weeks ago when I tried to open it, it opened for 15 seconds and then the icon disappeared. I have tried to reinstall and it didnt help. any one has similar case or can help?

Please post your problem in the Final Cut Studio (Final Cut Pro 7) forum:
https://discussions.apple.com/community/professional_applications/final_cut_stud io?view=discussions
You'll get the help you need in that forum.

Everytime i click on i tunes it won't work. the blue circle comes up for 2 seconds and then it goes out and i tunes doesn't come up. by the way i have windows 8 any suggestions on how to fix it ?

Everytime i click on i tunes it won't work ! The blue circle comes up for 2 seconds and then it goes out and my i tunes still doesn't come up. I have windows 8 and it was working when i first downloaded it which was a month ago, but now its not. I need the problem fixed any suggestions ?

I have the same problem, and my Ipod turned off (when I held the home and power button)
but then when I held down the home button (after turned off) nothing happened, the screen is still black.
Do you know what I should maybe do?
Thanks is advance

Ever since the last update, My iTunes continues to quit unexpectedly. It will open for one second and then close. Anyone have a solution for this. Please help.

Ever since the last update, My iTunes continues to quit unexpectedly. It will open for one second and then close. Anyone have a solution for this. Please help.
I've tried my best to troubleshoot. . . opening in safe mode nothing seems to work.
In the problem report, this is the error that stood out:
Crashed Thread: 8 Dispatch queue: com.apple.iad.iadidmanager
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000090

Hi there navicin79,
You may find the troubleshooting steps in the articles below helpful. The first thing I would try is reinstalling iTunes as outlined in the first article.
Troubleshooting iTunes installation on Mac OS X
http://support.apple.com/kb/ht2311
OS X Mavericks: If an app freezes or quits unexpectedly
http://support.apple.com/kb/PH13975
-Griff W.

When I open Iphoto, I see all my photos for a second and then they disappear and only a white dotted box appears. Then I click on it and for photos is a triangle with an exclamation point. It doesn't happen to all but quite a lot. how to I get them back

When I open Iphoto, I see all my photos for a second and then they disappear and only a white dotted box appears. Then I click on it and for photos is a triangle with an exclamation point. It doesn't happen to all but quite a lot. how to I get them back

Have you recently deleted photos using the finder or run clean up software? Is so restore your backup
If not the backup your iPhoto Library and launch iPhoto while depressing the option and command keys. Rebuild your database
LN

When i open iphoto i see my photo's for 1 second and then they are gone .The photo's are still there but i can see them only on the bottom or top of my screen when i try to open them i get a sign that it is not possible.Can somebody please help me?

when i open iphoto i see my photo's for 1 second and then they are gone .The photo's are still there but i can see them only on the bottom or top of my screen when i try to open them i get a sign that it is not possible.Can somebody please help me?

Have you upgraded to iPhoto 9.6 for compatibility with Yosemite? If not, try that first.
It looks like iPhoto has lost the connection between the thumbnails and the original image files.
This can be caused by a corrupted iPhoto library, or the originals have been deleted or moved.
Try first to rebuild your iPhoto Library:
If you do not have a current backup of the iPhoto library, make a copy of the library, but do not overwrite any previous backup.
Launch iPhoto with the ⌥⌘-key combination (option-command) held down.
Select "rebuild" from the first aid panel. This may take a while for a large library.
Can you now see your photos again?
If not, rebuild the library with iPhoto Library manager as described by Old Toad: Re: iphoto crashed

HT203175 Reloaded Itunes on an XP machine. Reloaded because Itunes would not open. Now when I play a movie that is in my library, The movie plays for aprx. 60 seconds and then reverts back to my Itunes library. Any ideas on a cure?

Reloaded Itunes on an XP machine. Reloaded because Itunes would not open. Now when I play a movie that is in my library, the movie plays for aprx. 60 seconds and then reverts back to my Itunes library. Does it with all movies in the library, Most where downloaded from Itunes. Any ideas on a cure?

This "original file cannot be found" thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2

Volume cuts out for split second and then comes back very low

Similar Messages

Maybe you are looking for