Volume doesn't appear after 3.0 Upgrade
I upgraded my 1st Gen. iPod Touch to the 3.0 software and now my volume bar is gone. Any suggestions? I've already restored and received Genius Bar support. They want me to pay $200 to get new hardware.
ya just plug in your headphones. The play/skip icons kind of move up and the volume slider fades in. I had the same problem. I like the graphic effect, though.
Similar Messages
-
Hidden parameters appears after Oracle 11gR2 upgrade
Platform: HP-UX B.11.31 U ia64
Upgrading from: Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
Upgrading to : Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
Issue : There are around 130 hidden parameter appear after Oracle 11gR2 upgrade.
Before upgrade I have commented the hidden parameters on the PFILE. PFILE only to start the database for the Oracle 11gR2 upgrade.
Before upgrade, checking the hidden parameter:
SQL> SELECT name,description from SYS.V$PARAMETER WHERE name LIKE '\_%' ESCAPE '\';
optimizerextended_cursor_sharing_rel
optimizer extended cursor sharing for relational operators
allowlevel_without_connect_by
allow level without connect by
I am using client parameter file ( PFILE ) commented the hidden parameters highlighted above.
However after successful upgrade to 11gR2, creating SPFILE from the PFILE ( commented the hidden parameters) now i am getting 132 hidden parameters.
SQL> select count(1) from sys.V$PARAMETER where name like '\_%' escape '\';
COUNT(1)
132
SQL> select name from sys.V$PARAMETER where name like '\_%' escape '\';
name
aggregationoptimization_settings
alwaysanti_join
alwayssemi_join
andpruning_enabled
btree_bitmap_plans
bloomfilter_enabled
bloomfolding_enabled
bloompruning_enabled
complexview_merging
compressioncompatibility
connectby_use_union_all
convertset_to_join
costequality_semi_join
cputo_io
dimensionskip_null
eliminatecommon_subexpr
enabletype_dep_selectivity
fastfull_scan_enabled
firstk_rows_dynamic_proration
gbyhash_aggregation_enabled
generalizedpruning_enabled
globalindexpnum_filter_enabled
gsanti_semi_join_allowed
improvedouterjoin_card
improvedrow_length_enabled
indexjoin_enabled
ksbrestart_policy_times
leftnested_loops_random
localcommunication_costing_enabled
minimalstats_aggregation
mmvquery_rewrite_enabled
newinitial_join_orders
newsort_cost_estimate
nljbatching_enabled
optimadjust_for_part_skews
optimenhance_nnull_detection
optimnew_default_join_sel
optimpeek_user_binds
optimizeradaptive_cursor_sharing
optimizerbetter_inlist_costing
optimizercbqt_no_size_restriction
optimizercoalesce_subqueries
optimizercomplex_pred_selectivity
optimizercompute_index_stats
optimizerconnect_by_combine_sw
optimizerconnect_by_cost_based
optimizerconnect_by_elim_dups
optimizercorrect_sq_selectivity
optimizercost_based_transformation
optimizercost_hjsmj_multimatch
optimizercost_model
optimizerdim_subq_join_sel
optimizerdistinct_agg_transform
optimizerdistinct_elimination
optimizerdistinct_placement
optimizereliminate_filtering_join
optimizerenable_density_improvements
optimizerenable_extended_stats
optimizerenable_table_lookup_by_nl
optimizerenhanced_filter_push
optimizerextend_jppd_view_types
optimizerextended_cursor_sharing
optimizerextended_cursor_sharing_rel
optimizerextended_stats_usage_control
optimizerfalse_filter_pred_pullup
optimizerfast_access_pred_analysis
optimizerfast_pred_transitivity
optimizerfilter_pred_pullup
optimizerfkr_index_cost_bias
optimizerfull_outer_join_to_outer
optimizergroup_by_placement
optimizerimprove_selectivity
optimizerinterleave_jppd
optimizerjoin_elimination_enabled
optimizerjoin_factorization
optimizerjoin_order_control
optimizerjoin_sel_sanity_check
optimizermax_permutations
optimizermode_force
optimizermulti_level_push_pred
optimizernative_full_outer_join
optimizernew_join_card_computation
optimizernull_aware_antijoin
optimizeror_expansion
optimizerorder_by_elimination_enabled
optimizerouter_join_to_inner
optimizerouter_to_anti_enabled
optimizerpush_down_distinct
optimizerpush_pred_cost_based
optimizerrownum_bind_default
optimizerrownum_pred_based_fkr
optimizerskip_scan_enabled
optimizersortmerge_join_inequality
optimizersqu_bottomup
optimizerstar_tran_in_with_clause
optimizersystem_stats_usage
optimizertable_expansion
optimizertransitivity_retain
optimizertry_st_before_jppd
optimizerundo_cost_change
optimizerunnest_corr_set_subq
optimizerunnest_disjunctive_subq
optimizeruse_cbqt_star_transformation
optimizeruse_feedback
orexpand_nvl_predicate
orderednested_loop
parallelbroadcast_enabled
partitionview_enabled
pivotimplementation_method
prerewrite_push_pred
predmove_around
pushjoin_predicate
pushjoin_union_view
pushjoin_union_view2
pxminus_intersect
pxpartition_scan_enabled
pxpwg_enabled
pxual_serial_input
queryrewrite_setopgrw_enable
removeaggr_subquery
replacevirtual_columns
resourcemanager_plan
rightouter_hash_enable
selfjoinmv_duplicates
sqlmodel_unfold_forloops
sqltunecategory_parsed
subquerypruning_enabled
subquerypruning_mv_enabled
tablescan_cost_plus_one
unionrewrite_for_gs
unnestsubquery
usecolumn_stats_for_functionI just came across a similar case: 1 (just one) of our (RAC-) databases has 130-something underscore-parameters set to non-default values.
version is still 11.1.0.7 (e.g. not 11gR2).
All of those hidden parameters seem to be CBO related (list on request).
Weird is: Only one of our (very similar, supposedly same-config) databases have these hidden parameters set.
Colleagues justly wonder: Who, When, What has caused these parameters to be expliclty set for this one system?
Note: we do not have the complete history of this system documented (systems have been managed by 3 different parties already).
It is quite possible they came in with some patch or upgrade (catupgr?) somewhere between 11.1.0.1 and 11.1.0.7, but a confirmation would be nice.
Information welcome.
System info:
Linux hostname 2.6.18-164.9.1.el5 #1 SMP Wed Dec 9 03:27:37 EST 2009 x86_64 x86_64 x86_64 GNU/Linux
Versions
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
PL/SQL Release 11.1.0.7.0 - Production
CORE 11.1.0.7.0 Production
TNS for Linux: Version 11.1.0.7.0 - Production
NLSRTL Version 11.1.0.7.0 - Production
5 rows selected. -
The mark of increasing volume doesn't appear when i use the back light key
the mark of increasing volume doesn't appear when i use the back light key
Hi,
Please write your notebook product number (p/n), which system are you using and country of purchase.
Resource:
How to Locate the Notebook product number (p/n)
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. ** -
Stand-by button on Cinema HD display doesn't work after Mountain Lion upgrade
Hi,
After I upgraded my Mac mini (spring '09) to Mountain Lion it appears that the buttons on the side of my Cinema HD display doesn't work. There is a setting in sys preferences that should put the Mac in stand-by when the power button is pressed. This doesn't work after I upgraded to OSX 10.8 Mountain Lion.
Does anyone have similar experience. Anyway to fix it?
Thanks,
HenrikHave done some further investigating (to no avail). The TV is displaying in my system Info as follows:
Intel HD Graphics 3000:
Chipset Model: Intel HD Graphics 3000
Type: GPU
Bus: Built-In
VRAM (Total): 384 MB
Vendor: Intel (0x8086)
Device ID: 0x0116
Revision ID: 0x0009
Displays:
Color LCD:
Display Type: LCD
Resolution: 1440 x 900
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Built-In: Yes
Connection Type: DisplayPort
TOSHIBA-TV:
Resolution: 1920 x 1080 @ 60 Hz
Pixel Depth: 32-Bit Color (ARGB8888)
Mirror: Off
Online: Yes
Rotation: Supported
Television: Yes
But nothing on the screen.
Does anyone know if Apple have banned certain screens???? -
Time Machine doesn't appear in Launchpad since upgrading to Mountain Lion
Since upgrading to Mountain Lion (I'm using 10.8.1), Time Machine doesn't appear as one of the apps when using Launchpad. I can't figure out where it "went" but how do I get it back into Launchpad?
It's still in the Applications folder and in my Dock but I'd like to know why it isn't in Launchpad any more?
Thanks.
SheriOpen Terminal and copy:
sqlite3 ~/Library/Application\ Support/Dock/*.db "DELETE from apps; \
DELETE from groups WHERE title<>''; DELETE from items WHERE rowid>2;" \
&& killall Dock
Go to Applications and drag the apps to Launchpad -
File open dialog doesn't appear after a period of time in latest version of Illustrator CC 2014
Hi All,
Is anyone else having a problem doing a File > Open after using Illustrator for a while? I select File > Open and nothing happens after I've used Illustrator for a while. Doesn't seem to be any pattern to it, the File Open dialog just doesn't appear so I have to shut down and re-open Illustrator.
Thanks,
BenHi Sumit,
I've tried as suggested and reset preferences a few times as outlined on the help page you referenced, but I still have the same issue. If I open one file, within what seems to be a random amount of "open file" or "place" commands, the file open dialog is not invoked and I have to shut down Illustrator and re-open it. Then I can do a open or place once or twice before I'm locked out again. Maybe a re-install of the app?
Thanks,
Ben -
Hello! I downloaded OS X Mavericks on my Mac and my pc didn't restart properly.my desktop image doesn't appear and i can't shut down my pc. what can i do ?
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter "BOOT_TIME" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Note the timestamps of the BOOT_TIME log messages, which refer to the times when the system was started. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged before the boot, during the time something abnormal was happening. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
For example, if the system was unresponsive or was failing to shut down for three minutes before you forced a restart, post the messages timestamped within three minutes before the boot time, not after. Please include the BOOT_TIME message at the end of the log extract—not at the beginning.
If there are long runs of repeated messages, please post only one example of each. Don’t post many repetitions of the same message.
☞ When posting a log extract, be selective. A few dozen lines are almost always more than enough.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A crash report has a name that begins with the name of the crashed process and ends in ".crash". A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent of each. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
☞ If you don't see any reports listed, but you know there was a crash or panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
☞ Please don’t post other kinds of diagnostic report—they're very long and rarely helpful. -
Xfce volume keys stopped working after 4.10 upgrade
Upgraded from Xfce 4.8 to 4.10.
Previously, the volume keys on my little Cyber Snipa game pad keyboard triggered volume changes and a little volume OSD display.
After the upgrade, this functionality is gone.
This volume control worked more or less "out of the box" for me after I installed Xfce 4.8, so I'm uncertain of what broke in the upgrade process. I did enable GNOME services after installing Xfce originally, and this option remains enabled.Can you use other buttons or verify that the game pad is still detected at all? If the volume key presses are recognized and it's just that there is no longer a command bound to them, you can probably restore that with xfce-keyboard-settings or xbindkeys.
-
Skype doesn't appear after log in
Hi, I'm experiencing a problem where whenever I sign in to skype, the log in screen appears, but then the main page doesn't. My computer still shows that Skype's open, but it won't appear whenever I click on it. I've tried shutting it down via Task Manager and even uninstalling it then reinstalling it and it still doesn't appear. People can still call me and I can accept the call, but I can't open skype for video call.
Please run this apps troubleshooter
http://download.microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab
Regards,
Tamim
Location - Dhaka | Bangladesh - Standard Time Zone: GMT/UTC + 06:00 hour
If one of my replies has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others. -
Library doesn't appear after transfer to new laptop
Hello,
I transferred my iTunes library to the new laptop, but it doesn't appear there. I checked library location, and it is correct. what else might be missing? or maybe some command needs to be performed?resolved by command "consolidate"
-
Satellite M200 doesn't boot after RAM 4GB upgrade
Hi,
I recently upgraded my RAM just to speed things up a little as RAM is soo cheap these days.
I have a M200 T2130 Vista came with 1GB (2*512) sticks.
The new sticks are 2 *2GB Dane-elec DDR2 pc2-5300, when I put the two in and rebooted the hard drive light came on briefly and then it just stayed idol, no POST, Bios options.
I tried using a single 512 stick with both new sticks and they both work in a 2.5GB setup just not together also this only works when the 512 stick is in the more internal slot and not the other way around.
So if anyone has had a similar prob or can give me some advice that would be great, I'm not to sure if the motherboard can support 4GB?
Thanks, Dave.Hi
There are two possibilities why your M200 doesnt boot after the RAM upgrade.
Firstly the installed RAM could be not compatible or could be faulty or the notebook doesnt support the 4GB RAM.
I dont know what M200 do you have exactly but you could check the installed chipset and could check on the Intel page if this chipset would support the 4GB RAM.
Greets -
Video artwork doesn't appear after upgrade to IOS 8
The videos on my iPad are a mix of videos purchased through iTunes and other videos from my personal collection. For years, I've had no problem converting videos to the appropriate format so that I could watch them on my iPad. I've usually add artwork to these files, and this has generally worked flawlessly. . . until last week when I upgraded to IOS 8. Now, the only artwork that shows is for items purchased from iTunes--the other videos are there, but there is just a blank box where the artwork should appear. I suspect that Apple has done this intentionally to encourage users to ONLY use content from iTunes, but the vast majority of users have much more diverse collections. If I'm right--shame on Apple, and this might be the last straw for me (a once very customer-centered company has become far less so in recent years). If not, does anyone have a possible solution?
Can't believe this worked! I had same issue since upgrade, searched web, found this... Hoover the mic for around 15 seconds... It only flaming well worked!
-
IPod Touch Remote doesn't connect after 8.1 upgrade
After upgrade to iTunes 8.1 with iTunes DJ my ipod Touch Remote app wont work as before.
I get a connection that makes it possible for me to vote and wish songs in iTunes DJ, but I don't have the possibility to change volume, stop, play, skip as before.
It's like my iPod is only a guest and not trusted Remote.
I've tried re-installing. I've checked the "find remote" in preferences.
I get the 4 digit code on the iPod, but I don't see my iPod under devices to the left in iTunes! So I cant enter the code....
It's soooo frustrating!
I've checked the firewall settings and I'm certain both computer and iPod are on the same wifi.
Please help!!Hi, Carriewise.
Thank you for visiting Apple Support Communities.
This article will help your troubleshoot the camera issue with your iPad even though it is labeled for the iPhone. See the section labeled Camera isn't functioning or has undesired image quality.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
If the issue persists, see the last section labeled Issue not resolved.
Cheers,
Jason H. -
CD/DVD doesn't work after Win 8 upgrade on Satellite L750
Hello,
after upgrading my Satellite L750 to Windows 8 I can't access my CD/DVD-unit anymore (error-code 19 invalid invalid or not complete registry entry). Same error occurs when I connect my USB BD-writer.
Who can help?
FrankHi guys
Found a solution here:
http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/bulletinDetail.jsp?pf=true&soid=3516888
*Uninstall the Toshiba programs:*
TOSHIBA Recovery Media Creator
TOSHIBA Disc Creator
Then restart your PC using the Power-->Restart option in Windows 8.
Your CD/DVD should be accessible now.
For help with uninstalling these programs follow the instructions below
*To Uninstall a program or application:*
1. At the START screen type Control Panel
2. Select Programs --> Uninstall a program
3. Find the two programs listed above and uninstall these applications
4. After the application programs are uninstalled restart your computer using the Power-->Restart option in Windows 8
5. When the computer power back on the CD/DVD drive should be available
If the CD/DVD drive still does not appear follow the instructions below to uninstall a device driver
*To uninstall a device driver:*
1. At the START screen type Device Manager
2. Select Device Manager > DVD/CD-ROM drives > right click on the device displayed > select Uninstall.
3. After the driver uninstalls, power down you computer using the restart method. The driver will install automatically when the computer restarts.
4. The CD/DVD drive should now be shown. -
Wireless doesn't work after windows 10 upgrade
Today as most of the world, I upgraded my HP Pavilion dv6 6115-tx from Windows 7 to Windows 10. After the upgrade, the wireless doesn't seem to work. My PC seems to recognise the wireless adapter though. The wireless adapter I have is Intel Centrino Wireless 1030. What is the solution? Can I download another Wireless adapter?
Please, run the DirectX diagnostics tool. Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post. Be aware that you will have to zip this file before attaching it here.
Maybe you are looking for
-
I am migrating to a new iMac via TimeMachine back up. My iPhoto libraries are on an external drive. Both drives are backed up on Time Machine. I'd like to migrate only the old internal hard drive data to the new internal Drive and then just plug i
-
Can I reinstall mountain lion and do away with Mavericks
Can I reinstall from aps mountian lion and do away with Mavericks? I do not like Mavericks at all.
-
On Windows you go to the Device manager, right click the device, click Update driver and follow through the prompts. How does one do this on a Mac?
-
Publish report remotely onto Enterprise system using webservice...
Hi, I was planning to publish report remotely onto Enterprise system using webservice. In this regard can I get some sample code. Thanks, Shashi
-
Hi, Is there any FM for reverse postings? Once the document has been reversed , we cant reverse the document again in a day. Does anyone knows how to do this?