Volume doesnt work correctly

The remote only incrementally changes volume. In other words, you need to push the volume button many,many,many times just to change the level more than one notch. A real PITA.

Finally found a solution for the P265 remote here:
http://forums.verizon.com/t5/FiOS-TV-Technical-Assistance/remote-control-volume-control-issue/m-p/39...
"On the new remote (P265) use the Samsung code and it is the 4th code also. Press and hold the <OK> and the 0 keys together, and then enter 331. Then press the <CH +> button 4 times, BUT block the the end (IR light) of the remote for the 1st 3 presses. On the 4th press of the <CH +> button the tv will turn on (or off), wait a few seconds, then press <OK> to confirm."
My wife and I are much happier now.
Justin
FiOS TV, 25/25 Internet, and Digital Voice user
QIP7232, QIP7100-P2, IMG 1.9.1
Keller, TX 76248

Similar Messages

Ipod nano doesnt work correctly

I have already boutgh the new ipod nano 7 generation, it works correctly, but when I transfer the music into it, the multitouch pad doesnt respond, and it works slower.

Looks like the battery is broken.
I would give it back to apple for a new one.
If you have an apple store next to you, bring your ipod to them, because that should save you a lot of time.

My ipad volume doesnt work

my Ipad makes noise but when i try to play songs or anything the sound doesnt work and my volume buttons dont work somehow

it does work for adjusting ring volume so i know its not just the buttons. its something technical

My volume doesnt work and when i press the volume button it shows the headphones volume on the screen without any headphones being plugged in. what can i do to fix this?

My volume on my iPad doesnt work, when I press the voulme button it shows the headphones volume on the screen without any headphones being plugged in. Is there a fix for this?

Try going to settings> general > reset> reset all settings. If that doesn't work. Place a headphone jack in there and just pull it out a couple times. The problem is either your iPad setting is stuck or there is actually a hardware problem and moving the jack in and out might fix it

Does any 1 no y my volume doesnt work when i video

dose any1 no y my volume dosent work when i video i have an iphone 5 but my gf has the 4 and her video volume is fine u can hear it

Are you sure your finger is not covering the microphone while you are taking the video ?

I have an ipod 1gen and the volume doesnt work

for soem reason when i put music on thru the headset it doesnt work .... and i dont kno what to do ive reset the settings and etc. turned it off and on and it wont go back to normal

Reset the Nano.
How to reset iPod
B-rock

DW pages doesnt work correctly

All pages made with Dreamweaver CC doesnt work in my browsers. I made design as in tutorial, but I can see only texts in browser. I used Explorer, Opera, Chrome. I also started my site on server, but problem is the same. Its strange that example file doesnt work too
.----> I see in browser
-----> Really in DW

Assuming you defined a local site folder in DW before you began this project, I'm guessing your style sheet is not properly linked to your HTML page or you forgot to upload it to your server.
Dreamweaver, Linking HTML to External Style Sheets
If you didn't define a local site folder, DW cannot manage links and assets for you. You must define a site for all new projects by going to Site > New Site and tell DW where to keep local site files on your hard drive. See screenshot.
Nancy O.

Laptop lid closing function doesnt work correctly

Hello,
I use openbox and acpid is installed.
When I close laptop screen, my laptop does not sleep nor hibernate, fans continue to work and if I put the laptop in to a laptop bag ( which I did because I thought it was working ), the laptop becomes very hot in very short time.
If I want to open the laptop again, screen does not open. I dont know if the system is really working or not but it doesnt open no matter what. So I'm forced to do hard reset.
systemd-logind service logs like its working normally but it is not;
Mar 01 20:02:11 isg00051371 systemd-logind[356]: Lid closed.
Mar 01 20:02:11 isg00051371 systemd-logind[356]: Suspending...
Mar 01 20:02:11 isg00051371 logger[1286]: LID closed
-- Reboot --
What should I do to fix this problem ?

Both of them failed again.
systemctl restart systemd-login made X crashed, so I started X again and used them together "sudo systemctl restart systemd-login && systemctl suspend", but same thing happened
pm-utils made fast move and I thought it worked, but then fan started to make noise, and when I tried to open it, it failed again;
Mar 02 00:46:34 isg00051371 sudo[601]: kerem : TTY=pts/0 ; PWD=/home/kerem ; USER=root ; COMMAND=/usr/bin/pacman -S pm-utils
Mar 02 00:46:34 isg00051371 sudo[601]: pam_unix(sudo:session): session opened for user root by kerem(uid=0)
Mar 02 00:46:44 isg00051371 sudo[601]: pam_unix(sudo:session): session closed for user root
Mar 02 00:47:10 isg00051371 sudo[647]: kerem : TTY=pts/0 ; PWD=/home/kerem ; USER=root ; COMMAND=/usr/bin/pm-suspend
Mar 02 00:47:10 isg00051371 sudo[647]: pam_unix(sudo:session): session opened for user root by kerem(uid=0)
Mar 02 00:47:10 isg00051371 kernel: EXT4-fs (sda5): re-mounted. Opts: data=ordered,commit=0
Mar 02 00:47:10 isg00051371 systemd-udevd[215]: error opening USB device 'descriptors' file
Mar 02 00:47:10 isg00051371 kernel: usb 3-7: USB disconnect, device number 2
-- Reboot --
I find arch wiki very confusing, it's not helpful. Only helpful guide was beginner's guide, the rest is either confusing or incomplete.
I think I'll install either Xfce or Gnome, because this is making me feel I'm going nowhere.
Also, another thing is, I dont know if its about disabling acpid but, now whenever I do something new, like opening a tab in firefox, clicking on search area in arch wiki, my machine acts like a new cd inserted, but instead it uses hdd, it stops for 1 second, drive starts moving, then it acts, and I'm talking about 8gb ram, i7 machine...

Max Headphone Volumes Doesnt Work?

So My iphone 4s was working great till today I turned the voume with my headphones all the way up then the sound just fizzes and has a constant buzzing noise. Tryed with 4 pairs of headphone(Beats By Dre, Standered Headphones, Skullcandys) and it happens with all. Then I have to uplug the headphones lower the volume then they work again. Any Ideas?
P.s Full Volumes works with iphones external speakers.

Stop turning the volume all the way up, its that simple.

QT 7.0.4 Install Doesnt Work Correctly on MAC OS 10.3.9

I dloaded QT 7.0.4 and installed it on a 1.25 mHz Dual Processor G4 MAC computer with 1.5 GIGS of RAM frunning MAC OS 10.3.9. I typed in the Pro Serial Number. When I click on either previously made in QT 6.5.2 movies or movies exported from SoundTrack Pro the QT 7.0.4 application DOES NOT EVEN OPEN. Either I get NOTHING or an error message that says the application has timed out. I only installed QT 7.0.4 and SoundTrack Pro for a project students are doing in the lab.
Any Help is appreciated since it SHOULD WORK. Thank you.

This is more of a solution for programmers than it is for users. I tried to hack an application this way and had no luck. If you really want to try, be sure to make a backup of your application first. Just copy it and paste a copy to your desktop or somewhere safe.
For the version you are editing, right click (or hold control and click) and select "Show Package Contents". Go to Contents->MacOS and you will see the actual program or in the case of Java applications, a file called JavaApplicationStub. This is the file to overwrite.
Keep in mind, this isn't entirely likely to work. It really depends on the application. You are better off reverting to Quicktime 7.01 using Apple's QT 7.01 reinstaller, or if you already upgraded to 7.1 use Pacifist to force the installation of both QT 7.04 and the 7.01 reinstaller. That worked for me.
iBook G4 1GHz / 768MB Mac OS X (10.3.9)

"When I open a link in a new tab, switch.." Doesnt work correctly

I'm using Firefox 28.0 (Waterfox build)
I've verified that:
- browser.tabs.loadInBackground: False
- browser.tabs.loadDivertedInBackground: True
- "When I open a link in a new tab, switch to it immediately" is enabled in the UI.
It seems only some websites actually switch to the new tab. Also, sometimes, this feature will stop working all together; requiring me to toggle the Firefox UI setting and/or restart firefox.

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Conditional Loop doesnt work correctly.

Hi There,
If you analyze my code, its all about parsing a dictionary.
Im checking the dictionary for the "aardvark" word. It gives me
false all the time. When "aardvark" is the first word in the array,
i.e my_dictionary[0] is "aardvark". I wonder why the conditional
loop isnt working fine. Im checking if the user string aardvark is
== my_dictionary
; it should be giving me the true value.
Is there any error in the code? Can anyone explain me where
im going wrong?
P.S -> The traces put everywhere gives me the right
output. Except for the result of the if().
Regards and thanks a lot in advance.
Roshan Kolar

Hi Raymond,
Thanks for the reply. I got the problem, actually the
conditional loop was perfect, the parsing was not. The reason
being, some words in the dictionary had a Space/NewLine/Carriage
Return at the last index after the word. It was all random, so some
words were taken, but some were not like "vicious" == "vicious " -
gave INVALID WORD.
So I redesigned the parser, where I removed the unwanted last
char - now the condition worked fine. Thank god I was working even
after posting the query.
Thanks a lot Raymond.
Regards,
Roshan

Swf export doesnt work correct

Hello
I created a website and exported the project into an swf file. Unfortunately some of the pages exported are correct and others show something else but not the stuff I created in CS4. Actually it is only text so nothing difficult. The result I get is something I had before, only bolt text parts or only the grey letters and not the colered letters...
Iam using version 10. Whats going on?
Thx for your help!
Matt

Hey,
the wreid thing is that I used on all pages the same font. Just on two pages the text is not exported correct. On the one page a part of a line is missing completely. But the rest of the text is exported correct. I also added something and it is exporting it all the time correct, but not the first line with some bolt and colered letters. On an other page there are only the headlines shown I wrote on this page maybe three days ago and I have already changed to something else. It seems to me that the software is using some information from the past???
Mathias
Edit:
Right now I removed everything from my page and even then I get the stuff I already mentioned! There is nothing on the page but the software exports something from the past...

Focus stacking doesnt work correctly

Hi there,
I tried to "focus-stack" multiple photos.
Everything is working fine, except when I blend the pictures together, only the bottom most layer will be shown. Photoshop won't select the parts of the layers which are sharp.
In this video I posted you will see what I am doing, it is in Dutch, but it's the same as the English version.
Can anyone help me out?
I use Lightroom and Photoshop CC, newest updates.
I import from my canon, and then convert the files to .DNG within Lightroom Import.
Thx

Thanks a lot guys! I really appreciate your help.
It's finally working (And now I see making good pictures for focus-stacking isn't that easy).
So this is what I did.
I first took R_Kelly his advice. I checked the version, and it seemed that this evening a new update has come out.
So I updated, tried the stacking again, And it was working.
Strange thing is, that in my opinion the update can't be the thing. It should have worked in older version right?
So I was thinking, when you update, photoshop will be resetted right? At least, the reset that Benjamin meant.
The final conclusion:
Resetting helped (with help of the update)
Thx!

Firefox udated, and now facebook doesnt work correctly.....

This morning firefox updated itself, and now all of the pop-ups on facebook do not work, no chat, no messages, etc....... is it a default setting that isnt allowing it? i tried my IE and it works fine on that...... ???????? thanks!!!!
== URL of affected sites ==
http://facebook.com

Hello.
You may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
If you want support for one of your add-ons, you'll need to contact its author.

Volume doesnt work correctly

Similar Messages

Maybe you are looking for