Volume don´t appear in MDC

Hello,
I have 2 servers with xsan 2.1.1 with Mac Os 10.5.6 Server, and I created four volumes in xsan2, and one of them dont saw in one of the servers. The log says:
Jul 28 13:14:18: --- last message repeated 1 time ---
Jul 28 13:14:18 xsand[49]: mkdir '/Volumes/Dates': File exists
When I watch file sharing in server admin, the volumes don´t appear, but I start terminal, and go to /Volumes, the volume appear. this occurs in the master controller of Xsan. How can I fix it? .
In the other server the volume appear, and I can make changes, but dont appear in the other server.
I share this volume by afp in a local network, when one client connect by afp and connect to server, the volume appear. This is very strange, any solutions please?.
Thank you very much!

Sounds like you have a phantom mount record. This is when a folder remains after the unmount. All subsequent mounts result in failure because the mount point is technically still there. To resolve this, unmount all SAN volumes from all clients and servers. Then shutdown your San volumes (this is just a safety precaution). With everything shut down, use Terminal to navigate to the /Volumes directory on the troublesome system. Once there, you will likely find an empty mount record with the offending name. Delete or move the folder. Then fire up your SAN and mount all your volumes.
Obviously, you can do all this without stopping the SAN. However, that is the safer way, especially if you are experiencing something other than I described.
This happens every now and then with Xsan and firewire drives. Expect to do this once or twice every few months.
Hope this helps

Similar Messages

  • Volumes don't appear in startup disk pane in System Preferences

    I have 10.3 on one volume of the original 120 G ATA hard drive. The machine boots fine from that. I have 9.1 and 8.5 on a volume on a 160 G hard drive I just added. Most files and applications all work fine from that drive. Only the volume with 10.3 appears in the startup disk pane in system preferences, except for a network icon. It even took several attempts to have that pane show up the Jaguar CD I put in. Why does the other volume with an OS on it not show up in that pane?
    Your help is much appreciated!
    Mike

    Hi Mike,
    "Why does the other volume with an OS on it not show up in that pane?"
    Because your computer cannot boot into OS 8 or OS 9 natively and therefore does not even offer it as a boot-system: Macintosh: Some Computers Only Start Up in Mac OS X

  • Some USBs don't appear in Finder. They appear in Disk Utilities so how do I get them to appear in Finder?

    Some flash drives/USBs don't appear in Finder. But they appear in Disk Utilities so how do I get them to appear in Finder?

    If you've never used them before (they are new) then they are not formatted for Macs.
    Drive Partition and Format
    1. Open Disk Utility in your Utilities folder.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    When you want to remove an external device you must Eject it:
    First, select the Desktop icon of the external disk. CTRL- or RIGHT-click and select Eject from the context menu.

  • Macintosh HD won't boot, but disk utility says "The volume Macintosh HD appears to be OK." How do I repair the hard drive?

    I have a MacBook that needs its internal hard drive's Macintosh HD partition repaired, as the boot screen freezes on startup.  I am running a separate, working mac OS from an external hard drive in order to run disk utility and repair the MacBook's internal OS.  The issue is, it has dismounted the internal Macintosh HD partition, and won't remount. And in addition to that, the Verify Disk option returns with, "The volume Macintosh HD appears to be OK." I've run Verify Disk and Repair Disk a few times, all with that same result.  And the internal OS still won't boot.
    I have attempted to make a disk image of the internal Macintosh HD partition and save it to my external hard drive so I can wipe the internal hard drive clean and restore the image, but I receive errors when trying to create the disk image, and when trying to erase the hard drive (I know, I should try to erase the hard drive when I haven't made an image. When I tried to erase the hard drive, the image wasn't done and I thought it was. I got an error for erase, and I got an error for making the disk image)  I have tried making a disk image multiple times and haven't been able to create one.
    There is also a boot camp partition on the internal hard drive which is of no importance as to whether it stays or is erased.

    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

  • Edir OU Objects Don't appear in Management Console

    ZEN ESM Ver 3.5.0.154
    I have created OU in Console One and created a Group so I can publish Policies to the group to reduce administration. The OU does not show up in the management console. I have tried rebooting, syncronising and loggin into the OU as well, with no luck.

    Hi there,
    With build 3.5.177 almost all of the issues you described are solved. The eDirectory integration part was greatly improved - I also suffered the issues you described in the previous releases, and you had to re-create the directory configuration in order for the new eDir objects to show up. Novell client is also not required anymore - pure LDAP communication.
    As for encryption, I understand your pain as I passed for the same situation. The encryption filter driver is now improved and you'll not notice any impact on performance once you enabled it. Previous requirement for encrypting only non-system volume was almost unpracticable as no customer that I know of had more than one partition on their laptops.
    In summary, I think it's worth to take a look.
    We are here to help if any issue arises.
    Good luck,
    Daniel
    >>>
    From: chalmerst<[email protected]>
    To:novell.support.zenworks.endpoint-security-management
    Date: 5/15/2009 5:56 AM
    Subject: Re: Edir OU Objects Don't appear in Management Console
    dspinatto;1691558 Wrote:
    > There is a new version 3.5.160 available for download at 'NOVELL:
    > Downloads - Novell ZENworks Endpoint Security Management 3.5 IR5'
    > (http://download.novell.com/Download?...d=D2kn-mCL_3k~)
    >
    > I couldn't find anything related to eDir OU's in the Known Issues
    > section of the Readme
    > http://www.novell.com/documentation/...me_zesm35.html,
    > however maybe you can try with this newer version if it repeats.
    >
    > BTW, does the group shows up in the MC?
    > Have you tried logging in as a user that is member of that group and
    > then refresh the console to see it the group and the OU structure shows
    > up?
    >
    > Good luck,
    > Daniel
    >
    > >>>
    > From: chalmerst<[email protected]>
    > To:novell.support.zenworks.endpoint-security-management
    > Date: 12/2/2008 9:56 AM
    > Subject: Edir OU Objects Don't appear in Management Console
    >
    > ZEN ESM Ver 3.5.0.154
    >
    > I have created OU in Console One and created a Group so I can publish
    > Policies to the group to reduce administration. The OU does not show
    > up
    > in the management console. I have tried rebooting, syncronising and
    > loggin into the OU as well, with no luck.
    >
    >
    > --
    > chalmerst
    > ------------------------------------------------------------------------
    > chalmerst's Profile: 'NOVELL FORUMS - View Profile: chalmerst'
    > (http://forums.novell.com/member.php?userid=37214)
    > View this thread: 'Edir OU Objects Don't appear in Management Console -
    > NOVELL FORUMS' (http://forums.novell.com/showthread.php?t=352773)
    Sorry it's been a while but gave up after Novell tech sup informed me
    that this was an issue in what was the current version at the time.
    Groups that are created before the install of ESM show up and can be
    published to, however, after ESM is installed if you create OU in NDS it
    never shows up. Tech supp said this was an issue they hoped to resolve
    in future releases. Besides this issue the data encyption had problems
    as well, once the policy was published with data encryption dir the PC
    utilistation went through the roof, again a bug confirmed by Novell.
    There answer to this was a change that created bigger problems for our
    company, you could only publish encrypted data dir to non system
    volumes, however all our PCs in our company only have one partition.
    Too big a job to create additional partitions to support this change.
    I was using 3.5 ir5 when I experienced these issues.
    I am querying this with novell since there seems to be an IR6 version
    now. I doesn't show up on our product list yet. When it does I have
    been tasked with testing it again to see if the bugs are out of it.
    chalmerst
    chalmerst's Profile: http://forums.novell.com/member.php?userid=37214
    View this thread: http://forums.novell.com/showthread.php?t=352773

  • Volume logo keeps appearing on screen of ipad Air

    The volume logo keeps appearing on the screen of my new iPad Air. Please advise.

    If you use your iPad in landscape mode (sideways) the volume up and down buttons might be hitting you lap and being activation end that way. Or a case may be putting pressure on the buttons. Or the buttons might be bad.
    First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
    If the problem persist and the above comments don't help Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

  • Green-colored volume indicators that appear on the LCD screen NOT working

    I have T61 with fresh install Window 7. After Win7 the laptop is VERY fast. The difference is incredible!
    I was running XP and everything worked perfect, now the green-colored volume indicators that appear on the LCD screen is NOT working. Yes, I did downloaded the driver(s) from Lenovo site and made the rest work just fine.
    Blue button works as well and when I open ThinkVantage I don't get any error.
    Any idea/help greatly appreciated.
    (I can live with out it, but it would be nice to have a perfect running laptop)
    TIA
    Ivone

    Hi Ivone,
    Not ignoring you, honest!
    I wasn't even sure that Lenovo supported Windows 7 on the T61... but they do! I don't have a Win 7 machine yet, but in the past, people have gotten their green bars back by re-installing one or more drivers.
    I didn't find Windows 7 drivers listed in the T61 support matrix, but if you go to the Support & downloads page and select T61, then select Windows 7 as your OS, there are a couple pages of drivers available. (Sounds like you already found them, just noting it here for my own and others' benefit.)
    Good luck, and please let us know if that works for you (and which driver fixes it, if you figure it out.)
    -Frank
    Results of Your Ideal Business-Class Laptop survey, concluded 2009-07-29.
    Did someone help you?
    Say thanks! with a kudo.
    Even better: Pay it forward, help someone else.

  • Image Processing and machine vision don't appear in Function Palette

    Hi,
    I have problem and I can't solve it
    Image Processing and machine vision don't appear in Function Palette, Although I set up NI imaq and NI Vision Acquisition Why??
    Anyone can help me?
    Solved!
    Go to Solution.

    If the image is already a Grayscale U8 image you would just have to save it to a bitmap file using the IMAQ WriteFile VI. If not, use the IMAQ Cast Image VI to convert it to a Grayscale U8 and then save it.
    Also, it would probably be better to create a new thread for questions like these.
    Cameron T
    Applications Engineer
    National Instruments

  • Some options don't appear in MAX

    I have an Agilent 86142A OSA connected via GPIB-USB-HS cable to my PC. MAX recognizes it in the tree, but a lot of options (like self-test, calibrate) don't appear. I'm new in MAX, so I'm not sure whether this is acceptable or not. Have I made some error in installing the device, or do some options simply not show up for particular devices? I've attached an image of MAX in this situation.
    If indeed the device is installed fine, how does one perform a test to see if the connection is good if the Self-Test icons don't appear?
    Please let me know if it seems the device has been detected properly and all is well.
    Thanks!
    Attachments:
    MAXimage.JPG ‏98 KB

    Everything looks find. You are not supposed to have options for self-test or calibrate. Those would only be for NI's DAQ cards.

  • Some images don't appear in iPhone, but do on desktop.

    Can someone download this PDF and let me know why the jpg images appear fine when viewing with desktop browser, but some images in the same document don't appear when viewing in Safari on the iPhone? Vector artwork and text show fine. Shows white space where JPGs should be.
    Specifically, pages 1 and 4:
    http://www.teamassociated.com/pdf/cars_and_trucks/TC6/Factory_Team/tc6ft_manual-mobile-4rg b.pdf

    I just heard about this day before yesterday at the InDesign Print and ePublishing Conference in Washington, DC. When using display on an iOS device JPEG 2000 is not supported. There are two flavors of JPEG: JPEG & JPEG 2000.
    Here's a Wikipedia article about JPEG 2000:
    http://en.wikipedia.org/wiki/JPEG_2000
    If I go to page 1 and 4 in your PDF and use Output Preview in Acrobat Pro (in Acro 9 > Advanced Print Production > Output Preview). Click on the Object Inspector tab and click on the image. It uses a JPEG 2000 filter.
    Since I don't know how the image was created and saved, I'll leave it to you to resave it as normal JPEG.

  • Layout option doesn't work in Easy Print VI panel, controls on tabs don't appear

    Found two problems with the Report Generation VIs:
    1) In the (Report Generation) Easy Print VI Panel or Documentation.vi, the Layout options don't work (dug down into the sub-VI's and found that they are not connected to anything).
    2) If you have controls or indicators on a Tab Control, and try to use the Easy Print VI Panel or Documentation.vi with the option to include controls in the report, they don't appear. The only controls/indicators that do appear are the ones that are displayed on all of the tabs (ie, create an control and move it on top of the tab control so that it appears on every page).  There is a sub-VI (Expand_control_ref_with_nested_controls.vi) that is called to handle nested controls (ie, clusters, arrays,etc...) but it should have a case to handle tab controls.
    Solved!
    Go to Solution.

    Hey Sajosie,
    Digging into the Sub-VI's you are correct in saying that the Layout Options user input is not connected to anything for most cases. However, In the default case of "Quick Print" the Layout Options are used to modify the layout of the report. In the help for this VI, it mentions that this input is ignored for "Standard Reports" and "HTML" report options. However, it does not mention that this ignoring of the Layout Options is expected for "Word" or "Excel" reports.
    In terms of including controls and indicators in the report that appear on tab controls, I can make a product suggestion to make this sort of front panel design more compatible with the Easy Print VI Panel or Documentation.
    Hope this helps.
    -Ben
    WaterlooLabs

  • Email notifications no longer don't appear on iphone 4s - iOS 7.0.4 locked mode.

    Email notifications no longer don't appear on iphone 4s - iOS 7.0.4 locked mode.

    Thank you, razmee209!  I must have checked everything 1,000,000 times, but when I just rechecked settings - notification - mail, I now see that Alerts -- both Show in Notification Center and Show on Lock Screen -- were turned off.  Can't believe I missed that, so THANK YOU!

  • .m4r files sync but don't appear AND outlook contacts won't add to iphone?

    hi guys,
    This is my first post, made just a day after I got my iphone.
    Now don't get me wrong, i love the iphone, but i'm worried i might have to send it back due to 2 glitches:
    1) I exported all my contacts onto my computer from my old k800i, then imported them into contacts on outlook. Then I synced my iphone to outlook through itunes and it appears to be doing something on the itunes bar only for me to open my phone when it's done and the contact list is empty. It's synced the calender and itunes music thought.
    2) I sent some ringtones to my friend who has a mac (I have a PC) and he changed them to .m4r files on that garage program on the mac, then he sent them back, i dragged them into the ringtone folder and they appeared. I went on itunes and they appear in the iphone tone menu, i sync with the actual phone and after saying it's done they don't appear in the tone menu on the phone.
    That's 2 annoying things, do I need to send it back?
    Any help would be great, thanks for your time.

    Hi,
    Please follow the steps below to make sure the reminders have been enabled in Outlook:
    On the File tab, click Options.
    Select Advanced in the Outlook Options dialog box.
    In the Reminders section, select Show reminders.
    Click OK.
    I also found a similar thread here:
    http://social.technet.microsoft.com/Forums/windows/en-US/70bbd99e-6c1b-4a56-b1eb-f1812f96ed56/outlook-2010-reminders-not-appearing-in-outlook-but-appearing-on-iphone
    As mentioned in the thread, you can try these steps:
    Use MFCMAPI to delete the Reminders Folder, then run "outlook.exe /resetfolders" to recreate this folder:
    Download MFCMAPI:http://mfcmapi.codeplex.com/releases/view/118446
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    If the problem persists, try to recreate the user’s profile of the Outlook to check this issue:
    http://support.microsoft.com/kb/829918/en-us
    Regards,
    Melon Chen
    TechNet Community Support

  • Emails don´t appear in phone´s inbox (only in subf...

    I run nokia messaging on e71 and synch with gmail.
    Many (gmail labeled) emails don´t appear in the phone´s inbox, but I have to navigate to the subfolder "all mail" to see them.
    Certainly, they appear in my gmail inbox just normally.
    Also, I am not alerted if these emails arrive on my phone (as only the inbox triggers the "new message" sound and is displayed on my active desktop.
    However, other emails can be found in both folders, but if I read/delete in one of the folders, it is not unread/deleted in the other. No need to say that this is really confusing.
    How can I handle this behavior?
    I have to comment that right now nokia mail is not really a professional push-email system that can compare to bb...

    I have the problem that is other way. My inbox is getting filled but my subfolder emails are not syncing...Please let me know if u have any solution. For each folder I also checked the subscribe to folder option also.
    thanks in advance
    sumanasu

  • Multiple google calendars synced to my ipad with exchange but the entries don't appear

    I've done this many times before with various iphones, but my new ipad2 vexes me. I want all my google calendars to appear in the calendar app on my ipad. I've:
    set up the google account as an exchange account
    signed in to m/google.com/sync
    selected the correct device
    enabled the calendars
    you can see the complete list of calendars in the the cal app, but the actual events don't appear.
    if i create a new event on one of these invisable calendars, it appears.
    thoughts?

    Can you attach a screenshot?
    * http://en.wikipedia.org/wiki/Screenshot
    Use a compressed image type like PNG or JPG to save the screenshot and make sure that you do not exceed the maximum file size (1 MB).
    There are other things that need your attention.
    Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
    *Next Generation Java Plug-in 1.6.0_14 for Mozilla browsers
    Update the [[Using the Java plugin with Firefox|Java]] plugin to the latest version.
    *http://kb.mozillazine.org/Java
    *http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)

Maybe you are looking for