Volume down button doesn't work

I am having problems with my Volume down button.  I've had the 5 for 3 weeks and it worked for the first 2 weeks.  I can only get the volume down with the earbuds volume control or on the screen if its an option.  I have reset my phone several times and I have the most updated IOS and it still doesn't work.
Any one else haveing the same issue or have any solutions for me.  I guess next I will try to restore the phone.... just really didn't want to have to go that route, but it may be necessary so I can at least try all my options.

Yes, restore the iPhone with current iTunes on computer. If still problem after that, make Genius reservation or Service arrangement and take or send to Apple for resolution under Warranty.

Similar Messages

  • HT4528 My volume down button doesn't work on my iPhone 5

    Just yesterday my volume down button stopped working. Did a reset on the phone and no fix. Any suggestions without having to go to the support desk?

    Hi Gogettem,
    Depending on what 'reset' you have done there may be other options.
    It will also depend on what you mean by stopped working.  If you mean that the button itself is stuck in then it is a hardware issue and needs replacement.  If you mean that it still pushes like normal but it won't change for you or won't give you any indication of changing then it's possible the below solution can work.
    First make sure you backup your iPhone to either iCloud or iTunes.
    Then use iTunes and while the iPhone is plugged in click on Restore iPhone from the summary page.  When the restore finishes, the important part is to restore as 'new' first and do NOT restore from backup.
    When you restore as 'new' you should test it.  If it still does not work then you need a replacement.
    John

  • HT4993 My volume down button is not working.  The UP button works, but not the down button.  I have tried to restart it and that didn't solve the problem.

    My volume down button doesn't work on my iPhone.  The UP buttown works, but not the down button.  I have tried a hard reset and that didn't fix it.

    Try this.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • My ipod nano 6th gen doesn't start. When I plug it, only blink the apple logo on the screen. I try to reset it holding by 8 seconds start button and volume down and doesn't work. My Ipod doesn't have any shock or water damage. How can I do?

    My ipod nano 6th gen doesn't start. When I plug it, only blink the apple logo on the screen. I try to reset it holding by 8 seconds start button and volume down and doesn't work. My Ipod doesn't have any shock or water damage. How can I do?

    Hey rulosrojos,
    The article linked below details a number of troubleshooting steps that can help restore functionality to your iPod nano.
    iPod nano (6th generation): Hardware troubleshooting
    https://support.apple.com/en-us/TS3474
    Sincerely,
    Allen

  • HT1688 My volume down button does not work on my phone and the button on the top of my 4s does not work..I bought the insurance on the phone from apple when. It was new

    My volume down button does not work on my phone and the button on the top of my 4s does not work..I bought the insurance on the phone from apple when. It was new

    Check the status of your warranty here:
    https://selfsolve.apple.com/agreementWarrantyDynamic.do
    Make a Genius Bar appointment to have your iPhone checked:
    http://www.apple.com/retail/geniusbar/

  • ATV remotes down button doesn't work

    I have three ATVs. The down button will not work when I try to use the remotes on any TV. My ATVs have been bricked as a result since I can't set up remote app to work on any of them.

    Yes, restore the iPhone with current iTunes on computer. If still problem after that, make Genius reservation or Service arrangement and take or send to Apple for resolution under Warranty.

  • HT201401 My volume down button has stopped working. Help

    Need some help troubleshooting

    Without knowing anything else, how could we?  Try resetting your iPhone by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.

  • Volume down button stopped working Acer Liquid E700

    Dear reader, I have an Acer Liquid E700 for about 3 months now. Suddenly the volume down button stopped working. I didn't do anything strange with the phone, but I think the problem started to appear right after I detached/attached the back case (but I don't think anything went wrong there). The volume down button is neither working for the volume, nor the screenshot option. I have the latest system update on the phone and the rest of the phones buttons work fine. Do you know what the problem is and perhaps how to try solve it? Thanks in advance,Vincent

    After pressing the button alot of times, it suddenly started working again -_-. Thanks for the answer anyway!

  • The down volume buttons doesn't work on my iPhone

    My down volume button doesn't not work on my iPhone 5. What can I do to fix it

    Thanks, daniel.early79!
    I have an iPhone5 bought in late Dec 2012.
    I've noticed on rare occassions that the volume down button some times would not respond.
    Starting yesterday, the volume down button would not respond more consistently.
    Sometimes a reset would fix it, sometimes a reset network would fix it, but the problem would come back.
    Came across this thread, and pressing gently on the upper right hand corner fixed it!
    I remember seeing some video on Youtube or iFixit that shows how to replace the power button. It appears that the volume buttons and the power buttons are tied in together on the same piece of connector. I supposed taking the iphone in and out of cases may have warped or twisted the connector inside the case ever so slightly that the sensor for the down volume button got shifted.
    The down volume button works now, after doing the trick you suggested. I'll wait and see if it comes back before taking it in for warranty repair.

  • HT1459 my 6th gen nano stopped working and is not recognized by my computer or in itunes. I tried rebooting with directions, it still doesn't work. I've tried pluggin into power source and pushing the on off button with the volume down button- this doesn'

    My 6th gen nano ipod stopped working. I figured it was because it was next to my sweaty body, so put it in rice. I sought help from internet and tried all of the troubleshooting steps; i.e pushing down the power button and the volume down button consecutively, plugging it in to a power source, waiting 10 minutes and pushing the buttons while it was plugged in. Nothing has worked thus far. Is there anything else that I can try?

    Hi there Betsyell,
    You may find the troubleshooting steps in the article below helpful.
    iPod nano (6th generation): Hardware troubleshooting
    http://support.apple.com/kb/ts3474
    -Griff W. 

  • Volume and Power button doesn't work..how do I fix?

    My son's volume buttons or the power button doesn't work.  Is there something I can do to fix these issues?

    Try the following to rule out a software problem.
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar                                                              

  • Hello i have a imac 8.1 and my volume down button stopped working..

    hello i have a imac 8.1 and the volume down button stop working..
    basically it seems that the f11 button is dead cause i can't make shortcut to this button anymore..
    i had the maverick osx and i install some vst for ableton before that happend but i make format the disk and clean install the osx lion and it doesn't fix the problem.. any help ??

    Very simple take it to an Apple Store or AASP and have it professionally diagnosed. Anything else would be guessing. Do NOT spend a penny on it until it is professionaly diagnosed otherwise you stand and excellent chance of throwing good money after bad.

  • HT201401 my volume down button wont work

    my volume down button wont work

    Try restarting your device. If that doesn't work, take it to an Apple store. If it is less than a year old and just stopped working, they will replace it for free (be sure to back it up to iTunes first). If you dropped it, you will have to pay because Apple will not replace a device due to "Human Error." If it is more than a year old, you will either have to pay to get it fixed, or have to pay to get it replaced.

  • Can't lower voice memo volume. My decrease button doesn't work anymore. Any other way i can lower it without disabling speaker

    Own an iphone 5. Can't control voice memo volume from anywhere that deals with volume on my phone. My decrease button doesn't work. I have to listen to my voice memos on full blown volume. Can't lower it from settings or from music. Help please!

    Hi,
    thanks for your answer. 
    The Size of all disks is: 6 x 4 TB.
    In the Pool are 5 x 4 TB plus 1 x Hot Spare. 
    It comes up to about 14,6 TB of Data formatable.
    But tried it also with just 3 x 4 TB to see if it works. 
    I just made a Raid5EE on the controller and then used Storage Spaces with simple, all worked fine. 
    Here the results of my tests: 
    1) your command had to be modified (typoe in usemaximumsize, and had to add -ResiliencySettingName Parity. 
    new-virtualdisk -friendlyname testpsh -storagepoolfriendlyname test -ResiliencySettingName Parity -usemaximumsize
    But anyway, my problem is not creating the virtual disk, but formatting the partition if it's parity only. 
    I added a screenshot: 
    Here you see my storage pool, and I added 3 virtual disk. 
    1 simple, 1 mirror, 1 parity. Only the parity cannot be formatted. The others can. No mather which size I do. 
    About a testserver, I added 4 x 4 TB to a VM (VHDX-files) and could do parity without problems. So it seems it is this server specific.
    As it worked with another controller, I really wonder if the controller could break parity of Storage Pools?
    The other weird part is, it sais "Raid" as BUS, but it's set to pass through, in details I see the serial of the attached HDD. 
    This is what properties shows on this volume. Always RAW. 
    I also tried Software Raid5 within the server. 
    This also worked fine. So really only parity. 
    Thanks
    Patrick

  • My iPod 5 shut down and hasn't turned back on (this isn't the first time it happened) I've read to put it in recovery mode but my home button doesn't work, how can I fix it?

    ipod 5, had it for about 2-3 years, constantly shuts downs for about 12 hours but this time it hasn't turned on for a whole day, and my home button doesn't work which occurred a long time ago.

    Try this previous discussion:
    Turn on without Home/Power Button

Maybe you are looking for

  • Multiple Users accessing the same core set of queried data

    Hi. We have a small call center and we want to build an app where the users can query the same core set of data and use it to initiate calls to study participants. The trick is that they will also need to update each record with information from the

  • Free subscription, but not in Newsstand?

    I have just successfully managed to make a subscription viewer with a free subscription, entered all info on Itunes Connect etc, but now I see this message on iTunes connect: Your first free In-App Purchase subscription(s) must be submitted with a ne

  • How can I open configurationGeneratorForge in Developer studio

    Hi, Can anyone tell me what configuration has to be done so that I cna open configurationgeneratorForge.epx in developer studio. Anup

  • BAPI Function Module for SCM APO Trans code /SAPAPO/AC42

    Hi,    Is there any BAPI Function Modules for SCM APO Tcode /SAPAPO/AC42.    This BAPI FM should return the column values "Remaining Prod Alloc"  and "Incoming Order Quantity" when we give    below details as inputs for the Tcode /SAPAPO/AC42        

  • Info panel/height and width

    When resizing or dragging a guide out the info panel or the height and width box dimensions ar enot live. They do not change until I let go so it is either guess or manually type in. is there a preference setting for this? If not what is the fix. Tha