Volume drop with 5c during Podcasts

I have a 5c and have noticed over the last few weeks that when I listen to podcasts with earphones after a few minutes the volume level drops by about half. It shows as still being at full volume on the controls so I can't put it up. And if I receive a text message whilst listening then the volume resets itself.
Anyone else had this problem or know what causes it?

Did you check the expression on the channel strip to see what it is set to? In many software instruments, expression controls the input level. Maybe expression is being sent by one of your knobs on your hardware accidentally, or you have some on screen object mapped to send expression. In the first case, you can check by leaving midi monitor open and spying on the input, to see if expression is being sent at any point...

Similar Messages

IPad 4 Volume drops really low a few seconds, then back to normal.

Hi All,
I am having an issue with the Volume on my iPad 4. I had one replaced 3 days before the warranty, but The replacement started doing the same thing. I realized it had to be an app causing it. I had been playing the RoboCop game for a bit and had just beaten it, so I deleted it. The trouble never happened again.
Now, it's doing it again and I'm thinking it must be another app causing it, but I can't seem to find it...and, obviously, it's out of warranty.
Here's what happens:
When I play anything with sound, after about 20 seconds or so, the Volume drops down so low it's almost not even able to be heard. It does this for about 3 to 5 seconds and then it comes right back to normal. It won't do it again unless I start a different video, song, app, etc...
I backed up everything to my MacBook Pro, Restored it to New/Default Settings, then Restored from Backup...it did not help. I also upgraded to the newest Version of iOS 7 when I did that...(Version 7.1.2).
If anyone knows what the problem is or what might fix it, PLEASE Help. It's driving me crazy!
Thank you so much,
Scott

You might want to try restoring as new - without the backup - and see if that fixes it. If it doesn't fix it, you can still restore the backup and you won't lose anything but a little bit of time that you spend restoring again.
Backup again, then restore as new, use the iPad and switch from song to song or from one app with sound to another....whatever you need to do to cause the sound issue again. If the sound issue doesn't come back, then you might assume it's something in the backup that was causing the problem. Start over and rebuild the iPad from scratch.
If the problem does not go away when you restore as new, you can always restore the backup to the iPad again and then take it to an Apple Store and ask them to take a look at it.

Phone call volume drops

This has occurred twice so far. Either at the beginning of an incomming or outgoing call, the ear piece volume drops to almost zero. Now it just happened in the middle of a call too. Only rebooting the phone resolves the problem. I'm wondering if this is something I should confront Apple with.

Hi,
Just purchased a 4 months old, like new, Lumia 1020.
Call volume is ridiculous.
I asked some acquaintances who also happen to have 1020 and they confirm the same - they all have problem with call volume being too low. Some of them started using bluetooth headset because Lumia's headset became unusable.
Some of them changed several Lumias under warranty, only for problem to reappear again after some time.
Soft reset, hard reset doesn't help. Signal is excellent. Protective mesh is clean. Blowing it doesn't help either.
Now, since I didn't know that this model has such a huge and elementary problem, I wonder what should I do, except get rid of it and make someone else miserable ?
You've put me in a bad position, Nokia...
Didn't expect this, very disappointed.
Attachments:
wp_ss_20140507_0001.png ‏193 KB
wp_ss_20140507_0002.png ‏156 KB
wp_ss_20140507_0003.png ‏110 KB

Volume Drop Problem (changes depending on how held)

The speaker volume on my iPhone changes depending on how it's being held. I surely hope this isn't considered a "feature". Held at a diagonal angle tilted backward, the volume drops considerably. It seems to play normal only when fully flat, or vertical.
Anyone else have this problem also? I'm considering exchanging it for another.

Don't you think it might just be a little useful to know what normally happens? I mean, you do realize that some phones sound silent when you tilt them a mm, while other phones sound almost the same no matter where you hold them. You do get that the difference in volume for the iPhone speakerphone when placed on a solid surface is much more dramatic than the changes in volume most other phones have due to placement, thus it's not something everybody thinks of right away.
Nobody tried to tell you that the sound waves were effected by gravity and the phone would be louder if you held it over your head right?
Read the first post again and think about it; 'speaker' refers to any sound emitting device like the 'headset', 'earpiece', or 'speakerphone speaker'...which you might even call the 'speaker speaker' or just 'speaker', regardless of how you define the parts; other people toss around the terms as if they are interchangeable. The post just says speaker.
If you are so bright then why are you asking a question at all? You know that if you move your body and the phone at the same time the volume shouldn't change. I mean..sure gravity does make the soundwaves drop quicker and all that so when you walk up an angled driveway the phone needs to adjust the volume, but that's only a little bit...not 'considerably' right?
Let's think for a second (or less for some of us). First, 'I was concerned some engineer mightve mistakenly thought of this as some cockamami "feature"'. Know what? It's a good idea. I wouldn't half mind a phone that could adjust the volume when I moved it to or from my ear or body. Seamlessly changing from the EARPIECE to the SPEAKER would be a great thing too. Things like switching from the bluetooth HEADSET to the SPEAKER are nice touches. I think you have an advanced model or a special feature.
It's also a little difficult for people to know how much your phone changes in volume when they can't hear it. It's not like there's a recording or some empirical data like 'hey, when I tilt my phone at a 45 degree angle it drops 20 decibels'.
As to 'reflected acoustics?!?!', I think the post starts with "speaker volume" and continues to 'when fully flat, or vertical'. Fully flat sounds like your phone is sitting on a table, shelf, or the floor and since I don't put my phone on a block then lay down on the floor with my ear above it to make a call I think the description sounds more like the speakerphone portion than the ear 'speaker'. Stating what the SPEAKER should do when normally performing in answer to a question should be considered informative and useful because : If you knew what the speaker was supposed to do you would not have asked.
Yeah, you never know who is using an iPhone or posting in the forums, but it doesn't take very long to read through the posts and find the information you want when you post a clear question in the first place.
I don't consider my phone a derogatory TLA, but if that's what you think of the product then I hope you enjoy your old phone.
Don't let the bass fall on your foot on the way out.

Audio volume drops on sub-titled clips (imovie 4)

When I place a sub-title on a video clip the volume drops considerably. When I highlight the clip and boost its volume even to the maximum 150% in an attempt to make the loudness consistent with the rest of the project, it's still not enough. Volume reductions like this occur even when I do contrast or brightness, etc. adjustments. How better boost volume with these clips that suffer volume reduction and maintain uniform audio throughout a project?

Hello Tom
Extract the sound of the video clip with the title and see if it makes a difference.
This takes me back some years. I don't recall the sound dropping off to the degree you speak of though. But give it a go, you have nothing to loose !
Cheers
jc

[Problem] Ringtone volume drops automatically

Hi all,
from 2-3 days I'm experiencing this bug/issue: ringtone volume drops automatically, randomly and without any reason. When it happens, I start a "battle" with iPhone: I increase (with side buttons) and it decrease ringtone volume!
I have already tried to restore and configure it as new one on iTunes, but the crazy thing is that this issue made is first appearance while I was setting language, at the beginning of initial settings!
I have an iPhone 4S 16GB updated with FW 5.1 and I'm becoming worried, because my first phone was replaced with this one for audio issue.
Greetz

I'm really sorry. I don't know what else to do. I recommend from here you contect Apple. They are great at getting back to there customers really quickly. Here is the link: http://www.apple.com/support/contact/
I hope you are able to find a solution to your problem! :)

Volume Drops When Skipping Song (via Lightning Adapter)

I currently have an aftermarket iPhone connector in my car, to which I have attached a Lightning adapter. On the road today, whenever I skipped a song (using the button on my car stereo), the volume dropped considerably for the next song. Only when I used the "fast forward" button did the volume increase back to its normal level. If I let the playlist go from one song to the next uninterrupted, the volume stayed as is.
Given the sequence of the events, I am assuming it is either the phone or Lightning adapter. While I did a hard reset, I have not had a chance to test in the car again. However, I do not experience the same issue with regular headphones.

Yes! Same problem here on two different iPhone 4s (mine and my wife's). If I watch the volume bar on the phones when I skip songs, it doesn't move, but the actual volume output drops to about half. Like the original poster, pause/play seems to fix it... until the next time I switch songs.
SoundCheck is off everywhere (phones and iTunes), so no help there.
Yet another reason to miss my 3GS, I guess...

Walkman Volume drops to zero when i connect a headset

My walkman Volume drops to zero when i connect a headset. I can adjust the volume settings for media but it snaps right back to zero. When i disconnect the headphone the volume settings work again so i can listen to media like mp3. But i would like to use my headset. Any tips?

Hi
I believe this has something to do with "Smart Connect" app.
If you don't wanna check on a lot of settings, then clear the data of smart connect app ( settings > smart connect > clear data) and your phone should be working as supposed to, otherwise check on the settings and it's easy.
Run the smart connect app > select "Music on the go" or "Music at home" ( Or any other profile to check) >Select the edit option at the bottom then check the settings if you have set the volumes to minimum when you choose to connect your headsets.
If you find it confusing, just clear the data of app and see if it works for you.
Discussion guidelines.
Message me or any other moderator to seek help regarding moderation.

Volume issues with GE60 Apache Pro-003

I recently picked up the new GE60 Apache Pro notebook, and I've been running it for about a week now. I should of course mention that I also did a clean windows install after adding an SSD to the system (and now can't figure out how to add back that cool MSI panel that was there when I first got the system).
Anyway, I've noticed that there seems to be volume issues with the system no matter WHAT kind of settings I tweak, or drivers I try to use. With all sliders up at maximum, the volume levels still never seem to surpass around 50% (from observing the volume gauges in the Windows Volume mixer panel). My previous notebook's speakers put out significantly higher volume, and was also able to put out far more power to my headphones (Audio Technica ATH-M50).
Any possible ideas for the cause and solution to this problem? Thanks in advance, and let me know if there is anything else I need to mention.

Quote from: darkhawk on 02-April-14, 20:44:14
What are you using to gauge the '50%'? MP3's? Windows sounds? or what?
Pretty much everything. Music, games, online videos... According to the volume mixer, the audio levels never seem to pass 50%. The grey bar bounces to the peak, but the green bar never seems to pass the 50% level. It's as if there's some sort of limiter in place I'm not aware of. And since I reformatted the notebook as soon as I got it, I was never able to see if the volume control worked correctly before the reformat.

How do I hide old podcasts in iTunes 11.1 and What's Up with the New Podcast Pane?

FIrst of all, I'm having fits with this "new" way of managing podcasts.
For years, I have managed the podcasts on my iPod (and now my iPhone 5) by manually syncing the device with my subscribed podcasts in iTunes. I have iTunes set to download the most recent episode of each of my podcasts and to keep all episodes until I delete them. Some podcasts I listen to or view only my MacBook Pro and I don't sync these to my iPhone. This has worked fine for years.
I moved to Apple's dedicated Podcasting app when I purchased my iPhone 5 earlier this year, but I maintained the manual syncing as I had done, using the app only to play the podcasts, not to subscribe to or download them.
I upgraded my iPhone 5 and iPad 3 to iOS 7 on launch day and downloaded iTunes 11.1 to my MacBook Pro, running OS X 10.8.5. The iOS upgrades went flawlessly for both of my devices, but iTunes has been a problem. It was sluggish when I first opened it, with lots of spinning beach balls. When I opened it for the first time, I went to the Podcast section and to my list of podcasts. They all now had "Subscribe" buttons by each of them (I was already subscribed to the podcasts in iTunes before the update). I assumed that I had to click the buttons to activate subscriptions in iTunes, but low and behold I discovered that it subscribed my iPhone 5's podcast app to ALL of the podcasts in my list (even ones that I don't put on the iPhone). It also started DOWNLOADING all of the episodes of these podcasts to my iPhone which, had I let it continue, would have eaten all of my bandwidth on Verizon for the month (and then some), plus the iPhone would have been filled up long before it could finish downloading the episodes.
I managed to get the iPhone's Podcast app to stop downloading these episodes, then I manually deleted all of the podcasts that didn't belong on the iPhone. I then had to go through all of the podcasts in the app and click a yellow box that said they hadn't been updated and wouldn't resum updating until I clicked the box.
Then I went back to iTunes 11.1, where I discovered that ALL the podcast episodes for my subscriptions that are still available for download in their feeds were now listed (2,000+ episodes), with previously listened-to episodes now showing with a cloud download icon next to them. Even more frustrating, I can't delete these from iTunes even though I've already listened to them and, even more frustratingly, the "Subscribe" button remains by each podcast in the list.
All I want to do is remove these previously-listened to podcasts from my lists, remove the subscribe buttons (since I'm already subscribed in iTunes), and continue to manually sync my iPhone's podcasts with iTunes as before. What do I have to do to make this happen? And if these are new "features" of the new iTunes, please share with your team that, while there are many who update wirelessly over their cell carrier's bandwidth, others of us don't have the capability (or desire) to do things this way and we want to switch this off and return to the "old" way of doing things.
Any ideas on how to fix iTunes 11.1 to return to the old way of doing things would be greatly appreciated!

What really cheeses me off here is that Apple isn't allowing users enough customization. With each update of iTunes (and the OS and iOS) we're forced to give up something that worked well for the way we want to use the app and make do with fewer (and lamer) options. If Apple keeps this up, they're going to start losing customers fast. I mean if this isn't fixed soon, I'm pretty sure I'm going to give up on iTunes, and then I'll probably go ahead and get a Galaxy when I need to replace my iPhone.
What I don't understand about how they won't let users delete the list of available podcasts now is why? How is this making it a better program? I can understand that not all users are capable enough to right-click on a feed and select "Show all available episodes", so I can see why they want the complete list to be the default (and, surprise, it already was). But to not give users the option to delete that list? It's inconsiderate because it makes navigating feeds with a large back catalogue really frustrating. I'm flabbergasted that no one at Apple considered all the podcast feeds that keep hundreds of episodes available when they removed this feature. It smacks of rank incompetence.
What improvement were they trying to make here anyway? There was nothing wrong to my mind about how podcasts were managed in previous versions. Whatever improvement they were trying to make here, they should have realized that many users would at least want the option to keep things the way they were.
And reverting to a previous version is no solution. I can't sync my iPhone with the new iOS without this update, and (while I do have some issues--specifically how you can't play podcasts in the Music app anymore) I do like the new iOS.

[SOLVED] Thunar 1.6 doesn't drag-and-drop with the right mouse button

Hallo all.
It might be something I've done (though I did delete my ~/.config/Thunar directory before upgrading), but Thunar doesn't let me drag-and-drop with the right mouse button, thus stopping me from copying something instead of moving it, etc. Has anyone else had that too?
Last edited by GordonGR (2012-12-28 14:34:20)

Joel wrote:
anonymous_user wrote:Is it supposed to be with the right-mouse button? I always thought drag and drop was done with the left button?
Could be right-hand user
Come on! Read what GordonGR wrote!
Microsoft Windows, Nautilus, the Haiku Tracker, and probably many other file managers have a feature where, when you right-click or middle-click and drag an icon to a new location, a pop-up menu appears and asks what you'd like to do (Move, Copy, Link). I thought I used to use this feature in Thunar too but it seems to have stopped working in recent versions. Has anyone else had any experience with it?
EDIT: Here's random blogger talking about the feature in an older version of Thunar: http://jeromeg.blog.free.fr/index.php?p … and-tricks So that's good, I wasn't just imagining the feature.
Last edited by drcouzelis (2012-12-12 03:45:05)

AppContainers_test fails with error during pre-test configuration checks

Hello,
AppContainers_test fails with error during pre-test configuration checks:
"[FAIL] The machine is not properly configured for testing: the test directory "C:\Windows\SYSTEM32\" is not ACL'd to allow execute permission for "APPLICATION PACKAGE AUTHORITY\ALL APPLICATION PACKAGES"
But that kind of permission for APPLICATION PACKAGE AUTHORITY\ALL APPLICATION PACKAGES was allowed, also i tried to allow full access, but error was the same.
In the test WindowsFilteringPlatform_Tests, the same requirement "REQ - Wfp-based products must not block App Container apps operating within their declared network intentions by default" was checked successfully.
How can i pass successfully AppContainers_test?
I installed lastest versions of QFE and filters on my server, but it didn't help.

Hi M'Alerter,
I have the same issue, have you found a solution to your problem ?
Cheers,
Ghalem

RE: Drag & Drop with ListView

By the way, has anyone tried to drag & drop a node from a listview to a
treeview? I can drag a node from the listview. But when I drop it into
the treeview, how can I find out which node of the treeview that I drop
into? Any help will be greatly appreciated.
Tien Wang
Indus Consultancy Services
http://www.indcon.com
Phone 201.261.3100 x233
Fax 201.261.1399
E-mail : [email protected]
Ulrich:
Try to change the state of the DVNodeText of the list view to FS_DRAG.
For example,
<MyListView.DVNodeText>.state = FS_DRAG. This may solve your problem.
Hope this helps.
Tien Wang
Indus Consultancy Services
http://www.indcon.com
Phone 201.261.3100 x245
Fax 201.261.1399
E-mail : [email protected]
-----Original Message-----
From: owner-forte-users [SMTP:[email protected]]
Sent: Thursday, October 02, 1997 2:07 PM
To: 'forte users'
Subject: Drag & Drop with ListView
Hi all,
I am currently implementing a drag and drop between a listview and a
treeview in Forte 3E.
The TreeView has an IsDraggable attribute that allows me to drag treeview
items while also highlighting the selected node. Unfortunately this isn't
the case with the ListView control. If I put the ListView in a draggable
state I can't see which node was selected.
Can anyone supply a solution to draggiing from a ListView while also
highlighting the node being dragged?
Ulrich Lalk
[email protected]

Ulrich:
Try to change the state of the DVNodeText of the list view to FS_DRAG.
For example,
<MyListView.DVNodeText>.state = FS_DRAG. This may solve your problem.
Hope this helps.
Tien Wang
Indus Consultancy Services
http://www.indcon.com
Phone 201.261.3100 x245
Fax 201.261.1399
E-mail : [email protected]
-----Original Message-----
From: owner-forte-users [SMTP:[email protected]]
Sent: Thursday, October 02, 1997 2:07 PM
To: 'forte users'
Subject: Drag & Drop with ListView
Hi all,
I am currently implementing a drag and drop between a listview and a
treeview in Forte 3E.
The TreeView has an IsDraggable attribute that allows me to drag treeview
items while also highlighting the selected node. Unfortunately this isn't
the case with the ListView control. If I put the ListView in a draggable
state I can't see which node was selected.
Can anyone supply a solution to draggiing from a ListView while also
highlighting the node being dragged?
Ulrich Lalk
[email protected]

Can't Drag and Drop with a Double Tap using Single Finger in Lion?

I installed the Mac OS X Lion two days. But I can't drag and drop with a Double tap using Single Finger, which I used to do in Snow Leopard.
If I choose Three Finger Move, then Swap Between Pages goes back to "Scroll left or right with Two Fingers" that only works with Safari, but doesn't work with Chrome or Firefox.
I tried literally every setting in Trackpad and also checked if there was a override settings and there is no overrride setting.
Would be thankful, if you guys could suggest me what to do?
======================================
My Machine Configuration:
Macbook Pro 13" (mid 2010)
Intel Core 2 Duo 2.4GHz
4GB Ram
Nvidia Geforce 320m
Mac OS X Lion (Installe on a updated Snow Leopard 10.6.8)

Hey Serge many thanks for telling me how to do. now its working like previously
I just cheked the Dragging under Trackpad option and unchecked Three Finger Moves. now I can drag and drop with a double tap using single finger.
Thank you guys. You are the best

Is anyone having volume issues with the new Iphone 4S?

Is anyone having volume issues with the new Iphone 4S?

Yes, the volume on my iPhone 4s will max out without me touching any button or setting. When opening mail, for instance, the ringer icon will appear and the volume level goes to max volume - and I'm not touching the volume buttons. It seems to happen randomly, at least I can't identify a pattern, but thankfully it doesn't happen all the time, but at least once a day.
Anyone else seen this?

Volume drop with 5c during Podcasts

Similar Messages

Maybe you are looking for