Volume Fader and Sends have only 128 Steps Resolution ?????
Hi .
I Notice that the Volume Fader and Send´s have only 128 Steps Resolution ?????
To avoid of the REAL problem you can use the Gainer Plug in and you will get 0.1db Steps for Volume with mouse wheel support...
Why is this not fixed yet...Is Logic Pro not a Professionel Music app .
In compare to other Application like Cubase has Full mousewheel support for ALL Mixing parameter (Volume, Send, etc) with a High resolution.
Love to Mix with Logic but put every time the Gain plug in in every track to have higher Volume resolution takes time.
We need higher Resolution for Faders AND Sends, icl Mousewheel support !!..
Do somebody notice this??
G5 DUAL 2Ghz Mac OS X (10.4.5) WAVES, Powercore, Logic 7.2
logic's name's been changed to protect the guilty.
i keep on pushing that logic's audio engine needs a total re-write.(with bus modelling)
G4 450DP Mac OS X (10.4.4) digidesign, motu, apogee
Similar Messages
-
I have bought itunes songs on an ipad with my daughter apple id. i would like to back them up on the same computer I sync my iphone with using my apple id but they will not transfer. Both iphone and ipad have only been synced on the computer mentioned since they were purchased. Is there any way to get the ipad music transferred to the computer?
And they were definitely purchased from the iTunes store, they show on the account's purchase history (Store > View Account on a computer's iTunes, or you can view the last 90 days purchases via http://reportaproblem.apple.com) ?
You could potentially log into the account on that computer's iTunes (Store > Sign Out to log out of your account, that will then change to a Store > Sign In option) and redownload them by clicking on the id towards the top right of the iTunes screen and Purchased on the popup :
But that will potentially tie that computer to that account for 90 days : Manage your associated devices in iTunes - Apple Support
Or do you have a different computer that you could redownload them on and then copy them over to that computer via a flash drive or memory card, and then add them to its iTunes via File > Add To Library ? -
I just synced my music to my iphone 5 and i have only one playlist but I need help
Hi,
i just synced my music to my iphone 5 and i have only one playlist but when i sync my music to my ipad i have other music on there that i don't want right now i just want my christmas playlist folder that i have playlists cause on my iphone 5 i just have one playlist which is christmas music playlist folder that has playlists in it which is what i only want on my ipad right now thanksHey,
Here is what I did:
1. Connected my iPad to the computer.
2. Opened iTunes.
3. Pressed Music Tab.
4. Pressed the Selected Playlists, Artists, Albums, and Genres
5. Then in the Playlist box below I only have the Christmas music folder checked and all the playlists in that folder checked.
6. Then I Synced my iPad
Here is a Picture of my iTunes of what I'm talking about and then also here is a picture of my iPhone 5 music that has only one playlist folder with playists in it -
i have a mixer which i was using with my pc and now i bought a new macbook and it have only one jack for headphones and to use mixers i need jack for microphone too so what should i do
You need to get headset splitter adapter.
http://www.startech.com/Cables/Audio-Video/Audio-Cables/35mm-4-Position-to-2x-3- Position-35mm-Headset-Splitter-Adapter-Male-to-Female~MUYHSMFF -
ipod touch is not recognized by itunes and i have executed all steps in the apple suggested troubleshooting, the device will not reboot either. Any suggestions?
Does it light up at all? If not, you could have a battery issue.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101 -
Ipod not syncing to itunes and i have tryed every step it told me to what do i do?
ipod is not syncing to my itunes and I have tried every step on the apple troubleshooting and it didn't work what should i do?
We may need more information: have you been able to sync before? when the ipod is plugged in and itunes is up is the device recognized?
-
when i log on to itunes it will tell me to review my account and when i do i click continue and it says my session has timed put and i have only been on for 2 seconds
Place the Device into Recovery mode... See Here...
http://support.apple.com/kb/HT1808 -
I have Lightroom 5.5 as standalone app on my laptop and I want to use Lightroom mobile too. But I am not an Adobe CC subscriber and I don't have Photoshop CC. Can I use LR mobile? Right now it's telling me it's on trial and I have only 17 days left.
But I paid for my Lightroom 5.5, LR Mobile is an app for LR5, isn't that unfair not to allow me to use LR Mobile? Adobe should change this policy.
-
When I try to download this I get a message that says I haven't got sufficient space on my startup disk. I have checked my available space on the disc and I have only 3GB free out of 500. I have hardly anything on my mac - how can this be?
Freeing Up Space on The Hard Drive
1. See Lion/Mountain Lion's Storage Display.
2. You can remove data from your Home folder except for the /Home/Library/ folder.
3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
4. Also see Freeing space on your Mac OS X startup disk.
5. See Where did my Disk Space go?.
6. See The Storage Display.
You must Empty the Trash in order to recover the space they occupied on the hard drive.
You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located. -
In order to install IOS7 on my 4S, I need more storage of 3.1GB and presently have only 1.3 GB. My biggest usage is the camera roll at 9.8GB. Photo stream is at 584 MB. My question is -should I delete the camera roll pics? They are saved on my computer.
At 1.3GB available, your storage space is getting very thin no matter what you do further. As long as you have the photo's in the camera roll saved on your computer you can delete them. Just make sure first that they are in your photo software. If updating in iTunes, just backup/sync first, then update, and that will save the camera roll in the backup as well.
At only 1.3GB you eventually are going to find yourself unable to install or update some app, or unable to take any new pictures, or some other limitation that will force you to free up space anyway. So now, before updating, sounds like a good time to make sure everything is backed up or stored somewhere else, and clean house a bit, then update. -
Hi, I tried to create a slideshow that contain more than 500 photos. Now, trying to open / execute / select the slideshow, iPhoto hangs with the spinning coloured wheel and I have only to force the deletion from System Preference. I already tried to rebuild the iPhoto Library (all the possible options) and tried to update teh version from 9.4.3 to 9.5 but the problem still persists: is there a way to delete this slideshow without selecting it ? How can I solve the problem, please?
Kind RegardsCan you restore your iPhoto Library from a backup version, that was created before you added the slideshow?
If not, have you tried to rebuild the slideshow with iPhoto Library Manager?
As described by Terence Devlin here: Re: iphoto library was created with an unrelased version of iphoto please quit and ugrade library by opening it in iphoto 2 or iphoto 4 -
How to count records in table and send email only if count 0
I thought this would be fairly simple, but apparently not. I'm trying to count the number of records I have in my staging table, and send an email if count > 0 . . . . and . . . . I want to put the count in the body of the email.
I'm running into a problem with the concatenation part of it.
SET NOCOUNT ON
SELECT * FROM [dbo].[Staging]
SELECT @@rowcount as Row_Count
SET NOCOUNT OFF
IF @@rowcount > 0
BEGIN
exec msdb.dbo.sp_send_dbmail @profile_name = 'MailTest',
@recipients = '[email protected]',
@subject = 'Successfully Loaded Production',
@body = 'Successfully Loaded Production ' + @@rowcount + ' records loaded',
@body_format = 'text'
END
The problem comes from the '+' character not being recognized. Maybe it's out of scope, not sure.
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.Try this
SET NOCOUNT ON
IF EXISTS (SELECT TOP 1 1 FROM [dbo].[Staging])
BEGIN
exec msdb.dbo.sp_send_dbmail @profile_name = 'MailTest',
@recipients = '[email protected]',
@subject = 'Successfully Loaded Production',
@body = 'Successfully Loaded Production ' + @@rowcount + ' records loaded',
@body_format = 'text'
END
Thanks
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
Hi,
i am trying to have such kind of functionality, so that if any servers in sharepoint farm failed then it will send notification email to specific user that server is not able to ping or failed. Right now following script is working but it sending mail either
servers are all running or dead. But i would like to send email only if any of the server failed to ping. what i need to modify following code to work.
Thanks in advanced
#### Provide the computer name in $computername variable
$ServerName = "localhost","Dc-XX"
$smtp = "ExchChange"
$to = "[email protected]"
$from = "[email protected]"
$sub = " Server Status"
$body = @"
##### Script Starts Here ######
foreach ($Server in $ServerName) {
if (test-Connection -ComputerName $Server -Count 2 -Quiet ) {
$body += write-output "$Server is alive and Pinging `n"
} else { $body += Write-output "$Server seems dead not pinging `n"
$body
send-MailMessage -SmtpServer $smtp -To $to -Subject $sub -Body $body -From $fromyou need to put a check on the send-mailmessage if no ping fails then exit else send the email with message.
also try this script, performing the the same thing but more granular way
http://gallery.technet.microsoft.com/scriptcenter/d0670079-6158-4dc5-a9da-b261c70e4b7d#content
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog -
I have a new 16g nano. I have only added about 600 songs so far. It is telling me that I 4.47G of songs and 9.92G of other and only 3.297MB of space left. I have no tvshows, no movies, no pictures on the Ipod. How do I find out what the "other" is and get rid of it?
You most likely have some corrupted files in other. Restore it and resync.
-
TS1292 i have lost all my money on my card and i have only used five dollars
I bought a 25 dollar itunes card and have only used it once and it is only showing 19 cents
Check your purhcase history:
http://support.apple.com/kb/HT2727
Maybe you are looking for
-
Hello! I want to create a crosstab report that does not have any blank cells when I export to Excel. When I create the crosstab, it automatically does what looks like a group sort. When I export this to excel, there are a lot of blank cells that need
-
I have an issue in comparing dates in IF condition. I tried the below, its not entering the if condition if :header.start_date = sysdate then end if; NO JOY. Can someone advice me on this. Thanks Pandian
-
Windows mail not saving passwords
We have windows vista business. It's not saving passwords for email accounts. I tried disabling avg and online armor but the same things happens. I tried entering the passwords in tools>accounts>(account)>properties>servers but it doesn't save it.
-
Will iPhoto let me assign unique keywords to a single photo without having to draw the keyword from a list of saved keywords? That would be pretty limiting. I'd much prefer to be able to assign keywords on-the-fly and then be able to locate the photo
-
Hi I have a main query as below; SELECT Forenames, Surname, Mobile, StaffStatus, tblStaff.ID FROM tblStaff How can I add the result of below sub query 'Jobs' as a column in the query above where tblStaff.ID = tblStaffBookings.StaffID? SELECT COUNT(ID