Volume fader drops to -6.2 -6.1  bouncing in between when i try to record

Any help for this logic problem?

I don't see the problem.
This is volume, not input level and has no effect on the incoming audio. The level will return to old value once you disable record regardless of how you adjust it while its in record mode.
You can set the record and playback volumes seperately. So if you want it to stay the same, set it there once.
Message was edited by: chaosmoon
Message was edited by: chaosmoon

Similar Messages

  • Siri problem: volume suddenly drops and screen goes dark when turning phone

    Hi, just wondering if anyone else has or had this problem. It's been hard to quantify, but here goes.
    A number of time, when I  use siri, I will hold the button down to ask a question. Sometimes the volume will drop to a very quiet level so I can barely hear the response. Then the volume will pop right back up to its normal volume. The screen also goes black at this time, and when the volume pops back up, the screen will show the normal info it should at that time, such as what I said, or the clock if I asked for the time, or siri's quote, etc.
    Many times I will pick up my phone from a flat surface and turn it on its side as if making a call, and that is when this will happen, as opposed to me holding it flat. It also seems to occur in the morning, when the phone has been asleep overnight or it may be from cooler morning temps.
    Any ideas as to whether this is a hardware problem? I've only had the phones couple of months. It's happened so many times now I'm finally seeing this pattern I described.
    Thank you for any feedback!
    Ps... I've never had this problem with my ipad 3rd gen, even though I've truest to recreate the conditions, turning it, trying first thing in the morning and so on.

    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore from Backup...  Restore as New...
    Restart / Reset
    http://support.apple.com/kb/ht1430
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414
    If you try all these Steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
    Be sure to make an appointment first...

  • Volume Fader and Sends have only 128 Steps Resolution ?????

    Hi .
    I Notice that the Volume Fader and Send´s have only 128 Steps Resolution ?????
    To avoid of the REAL problem you can use the Gainer Plug in and you will get 0.1db Steps for Volume with mouse wheel support...
    Why is this not fixed yet...Is Logic Pro not a Professionel Music app .
    In compare to other Application like Cubase has Full mousewheel support for ALL Mixing parameter (Volume, Send, etc) with a High resolution.
    Love to Mix with Logic but put every time the Gain plug in in every track to have higher Volume resolution takes time.
    We need higher Resolution for Faders AND Sends, icl Mousewheel support !!..
    Do somebody notice this??
    G5 DUAL 2Ghz   Mac OS X (10.4.5)   WAVES, Powercore, Logic 7.2

    logic's name's been changed to protect the guilty.
    i keep on pushing that logic's audio engine needs a total re-write.(with bus modelling)
    G4 450DP   Mac OS X (10.4.4)   digidesign, motu, apogee

  • Controller volume fader changes all fader levels

    Hi,
    I'm using an M-Audio KeyRig 49 controller.
    I set up a whole concert and it worked fine. I set up the keyboard's only fader to control the master volume. But now whenever I touch the keyboard's fader to adjust the master volume each channel's level jumps to the fader level - throwing off all my levels.
    I'm new to MainStage (and Logic). How do I separate them so the volume fader only controls the master volume and I can set the channel levels once and leave them?
    I have to have it up and running by this weekend.
    Thanks!

    I may have answered my own question.  Seems that when I record with the master fader on a lower level the problem is resolved. 

  • Volume fade in at the beginning of a song

    When you pause/restart a track the volume fades out then back in again. I don't particularly like this, but I can understand why it's a feature. It would be nice to turn it off though.
    Anyway, my issue is when Spotify fades in at the beginning of a track. This happens when you select a new song or when you slide back to the start of a song using the seek bar. For obvious reasons, this is not ideal for a lot of songs.
    Does anyone know if there's any way to stop this...there's nothing in Settings or anything.

    I'm not sure how processes and threads work, but it appears that the Harmonic widget actually saves the lyrics it downloads in the song file. (Take a look at Get Info > Lyrics on a song after you have started playing it with the widget enabled.)
    I know when I have done some other changes (song name, artist name, etc.) on songs that are playing then there is sometimes a small pause while it saves. I assume the same thing is happening.
    The Harmonic widget looks nice, but has some serious problems at this point. I have 1.5.1 and most of the lyrics I see are for incorrect songs. I have been trying to get the 1.5.2 download, but their link is broken with no fix eta. (see http://www.mindquirk.com/forum/viewtopic.php?t=385) Until then I have deleted it and things seem to be working fine!

  • Is there volume fade or volume control for audio?

    Is there volume fade or volume control for audio? If for example you wanted to use an audio clip and adjust the volume.

    Cabbagepatchkid
    Premiere Elements 12 Mac
    You should be able to right click your audio and select Fade, followed by Fade In Audio or Fade Out Audio.
    Please refer to my blog post on Fades
    ATR Premiere Elements Troubleshooting: PE11: Timeline Fade Out Shortcuts and Time Stretched/Time Remapped Video
    As mentioned I am strictly an Elements Windows user, so I am assuming that the Premiere Elements Windows and Mac
    are the same on this feature.
    Please let us know if you need clarification on the above.
    Thank you.
    ATR

  • Music volume keeps dropping on my iPhone 6 when using both headphones and AirPlay

    when playing music on my iPhone 6, sometimes the volume will drop for reason at all. Fortunately it doesn't happen too often, but when I'm driving and it dones happen, I can bearly hear it. It corrects itself completely at random too. Please help, it's an annoying problem.

    Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose any data by resetting, but it can cure some glitches.
    If this does not help, setting it up as new device would be the next step:
    How to erase your iOS device and then set it up as a new device or restore it from backups

  • Volume suddenly drops in iTunes 11.1.4, on 10.9.1

    Volume suddenly dropped to VERY low. Turning off sound check helped sligtly, but levels are still abnormally low. This symptom only exists when iTunes is the playbac device. All other sound sources (QuickTime Player, Peak, Logic, DVD Player, etc.) behave normally. What is wrong?

    Never mind... somehow I moved the iTunes master volume down!!!! Argh!

  • In GarageBand '08 after 2 seconds the recording volume fades to a low level

    When I record the volume fades in... It goes to recording just fine then within two seconds it fades to low volume!!!??? I havnt touched any settings it worked fine when i first got it! Then all of the sudden i go to record and it does this... it did the same thing on my last comp last year , i took it in for a repair and asked the mac genius he did something and it worked fine again...
    didnt know what he did..i thought it was push the follow project tempo button, (tried this it doesnt work?) Has anyone had this problem?
    running GB 4.1.1 (428) Just updated

    Try this...
    Go to "System Preferences" and select "Sound" under the "Hardware" panel. Select "Input" on the bar and in the "Internal microphone" section, un-click the box on the "Use Ambient Noise Reduction" area. This fixed the problem with the sound "fading out" after 2 seconds on a record.

  • My Nano 6th gen volume randomly drops to minimum, help?

    I've had my nano for about two years now, and out of the blue it suddenly decided that when I turn the volume up it should turn the volume down to nothing. The screen was lit, and I watched the volume bar drop, but I wasn't pressing anything. I tried to turn it up twice more before the volume would stay. I've never heard of this happening before, so I'm really worried. Does anyone know what's going on?

    That is usually a sign that moisture has come into contact with the iPod causing it short out and do all kinds of weird things such as turning the volume down.  This same problem has occurted with several users who workout with their Nano.
    You can try leaving the Nano in a sealed bag of uncooked rice to let all the moisture be absorbed.  If that doesn't help your iPod will likely need to be serviced.
    B-rock

  • When I try to map faders to the volume in audio tracks it only lets me map the "selected track"

    LogicX user. I'm trying to map my mpd32's faders up with four audio tracks to control their volume. For the first three tracks, I can map the faders accordingly, and in the Controller Assignments window, in the "channel strip" section on the right, they all say "fader bank (1-3)", which is correct. When I get to the fourth audio track, and I go through the same steps as I have to map the first three audio tracks, the channel strip section says "selected track: 1" instead of what I thought it would say: "fader bank 4". When I try and manually change that to "fader bank 4", I move the control that I want it to be mapped to, it and the text automatically switches back to saying "selected track 1". I made sure that none of the tracks that I was trying to map were selected before I did this. I'm not new to logic by any means but I seriously need to be able to control these all at the same time for a performance I'm trying to do soon. It is driving me ******* crazy.

    David Boroditsky wrote:
    The problem is that the mac chokes on having 2 identical mics attached at the same time.
    Ive had 2 identical USB AT2020 mics connected at the same time on both macbook pro and macbook Air.
    The "Yeti" mics, are, lets say undesirable, and low to mid computer consumer mics.

  • My speaker doesn't work when I try to listen to music or open up a quick time file, however they seem to work perfectly when I listen to a voice memo (p.s. the volume slider disappears in a song page and even in the multi tasking bar)

    my speaker doesn't work when I try to listen to music or open up a quick time file, however they seem to work perfectly when I listen to a voice memo (p.s. the volume slider disappears in a song page and even in the multi tasking bar)

    Thanks for your solution, it wasn't quite what solved the problem but i remembered that i had a bit of salt water on my phone recently and spraying the charging port with an anti-oxide spray solved my problem, do you mind if i ask, how is the charging port related with the volume or/and speakers?

  • A few months back I Dropped my iPhone 4 and I cracked my screen and now i cant unlock my phone due to touchscreen not working plus there are blured lines across the screen and I can't see anything that it displays. Now when I try too connect my iPhone 4 t

    A few months back I Dropped my iPhone 4 and I cracked my screen and now i cant unlock my phone due to touch screen not working plus there are blurred lines across the screen and I can't see anything that it displays.
    Now when I try too connect my iPhone 4 to iTunes on my computer at home an error message comes up saying that I have to unlock my iPhone 4 for it to communicate to my device.
    But the problem is that I can't unlock my iPhone 4 because I'm unable to see the key pad and my touch screen no longer responds when I touch it.
    I just want to reset my iPhone 4 back to its Factory Settings & start all over from the beginning.
    How can I unlock my iPhone 4 with iTunes on my computer or any other option you suggest me trying.
    Thank you in advance,
    SiHero

    If you have had a "local guy "repair your iphone you will not get any support from Apple for warranty OR post warranty
    If Verizon return it to Apple it wil not be handled by Apple
    If Verizon also use unauthorised repairers you may be lucky
    (Apple do not sell parts to local guys or anyone else )

  • My ipod touch keeps turning the volume down by its self  and when i try to turn it back up it wont let me also when the sound is off the speaker that comes up when you turn it on down on the screen wont go it just stays there it doesn't go!Any ideas why?

    I got my ipod for christmas this year its the 4th generation.It keeps turning the volume down by its self,when i try to turn it up it does not work. It wont let me i dont know why so i cannot play music on my ipod which defeates the reason i got it.Also when it turns the volume down its self or i on the rare occasion that the volume works and i turn it down the speaker comes up and will not go.It stays there which is making my ipod difficult to use.Its been doing this for about a week now.I used it alot and i feel lost without it haha. Does anyone know why its doing this? Or a way i can fix it? I've cheaked for updates and there is none!
    Thankyouuu
    it looks like that when it is locked and when its unlocked it looks like this

    Have you checked the volume button? It might be physically stuck. To determine whether a hardware repair is needed, you need to follow these steps:
    1. Try doing a hard reset:
    Press and hold both the Home button and the Sleep/wake button simultaneously for about 15 seconds and release when the Apple logo appears.
    After that: test the device to see whether the issue is solved.
    2. If the issue is not solved, you should backup the device and restore it as new.
    In that case, use: http://support.apple.com/kb/HT4137
    NB: set up as a NEW device because a software issue will be in the backup.
    If the issue persists after restoring as new, you should offer the device for service.
    If you get specific error messages/codes in iTunes when updating/restoring, check this: http://support.apple.com/kb/ts3694 for causes and solutions
    Good luck
    Stijn

  • Hi, I dropped my i-phone 4 down the toilet 6 days ago and have left it in rice to dry out.  When i try turning it on there is no power.  I connected to charger and the apple sign appears.  After a while it shows iOS6 on screen and then asks me to connect

    Hi, I dropped my i-phone 4 down the toilet 6 days ago and have left it in rice to dry out.  When i try turning it on there is no power.  I connected to charger and the apple sign appears.  After a while it shows iOS6 on screen and then asks me to connect to i-tunes however my i-phone does not appear on i-tunes.  Can you advise me what to do next?

    Make an appointment at the genius bar and take your credit card. An out of warranty replacement is $199 for a 4S, $149 for a 4.

Maybe you are looking for