Volume higher level in Vista than OSX?

Hi everyone, this isn't a major issue but I'm really wondering why does my integrated speakers goes to an much higher level with windows vista than with OSX??? It's the same hardware and so should have the same sound level on both os... and it's not a slight difference for example to get the same level of sound that 1 bar gives me in Vista(I'm referring to the volume pop-up Icon from Apple) it takes me about 3-4 in OSX... Did anyone notice that too?
And if I'm not alone could Apple explain this situation 'cause I'd love to have the same level of sound in both OS.

resetting the pram can sometimes restore the volume of your mac to its default settings.
see Resetting your Mac's PRAM and NVRAM

Similar Messages

Can I get a higher level of os than what you can download?

Can you change cpu's to get a higher level of osx? I'm new to mac's and this laptop was given to me and the software I want to load requires a higher level of osx than 4.11. Is there anything physically I can do to update it?

10.5.8 is the latest OS that will run on a PPC Mac. You would need to purchase on the open market as Apple no longer sells this version of OS X.
Some source links:
http://hardcoremac.stores.yahoo.net/
http://www.welovemacs.com/apsyso.html
http://www.buycheapr.com/us/result.jsp?ga=us14&q=leopard+10.5+os+x
http://oldermac.hardsdisk.net/oldmac.html#hard

Can you post Notes (Display Note) at a higher level of aggregation than CVC

I am only able to post Notes with the Display Note at the CVC level. ALL PRODUCTS ALL CUSTOMERS and I receive the error message "No Notes can be processed in the current selection". ONE PRODUCT ALL CUSTOMERS OR ALL PRODUCTS ONE CUSTOMER and I get display only no input (greyed out). I can post notes at the CVC level. Is this the only level you can post notes.

HI Kevin ,
Yes there are restrictions on the levels you put the note and the level you can edit the notes.and hence those will be greyed out at certain levels .
For more details please refer my earlier post [No notes can be processed in the current selection - Error Msg|Re: No notes can be processed in the current selection - Error Msg.]
Regards,
Digambar

Changing OSX default volume setting to a higher level in sound preferences

When I change the default volume setting to a higher level in sound preferences within OSX, it is back at the lower level at the next listening session the following time I use iTunes on my Mac Mini. Within System Preferences there is a section that lets you "choose a device for sound output" but the only choice I have is "line-out" and under the "port" heading there is only "built-in output"--no other choices are shown. I have external speakers attached which I like to use for listening to music as I work. What is the problem? Why won't the higher volume I set remain? Also, shouldn't more than one choice be shown for sound output?

This sounds like the problem that I'm experiencing and <a href-"http://discussions.apple.com/message.jspa?messageID=2694517#2694517">aske d about a couple of days ago. The sound level resets to 50% after shutdown.
I tried setting the levels in Audio MIDI Set Up as suggested above, but that hasn't changed anything.
In answer to B_web, I am running my external speakers through the headphone jack.
So, any other suggestions?

Running a Sub-VI and monitoring data that is generated on a higher level VI

Hi All,
This question must been there before, but I cannot find a suitable answer here on the forums....
I have a 'top-level' VI that does a lot of things. I also have a sub VI that runs a frequency sweep on a piece of equipment. This is done with a for loop.
Problem:
I want to monitor/access the data that is generated in the for loop (See attached, the 3 wires within the green circle I want to monitor).
2 Questions:
How can I access the data on the wires (within the loop) from a higher level VI?
How can I then run this VI in a higher level VI while the higher level VI is continuing and not waiting for the sub-VI to complete?
I tried using a Que but I cannot seem to get that working.
Any suggestions?
Regards,
Attachments:
LV problem.PNG ‏44 KB

The queue is a good way to move data from a running subVI to another VI. Your problem is that if the subVI is inside a loop in the main VI, that loop in the main VI cannot iterate until the subVI completes. The solution: have the sub VI running in parallel - not inside - the loop.
Look at the Producer/Consumer Design Patterns (at File >> New... >> VI >> From Template >> Frameworks >> Design Patterns >> Producer/Consumer. This may be more than you need at the moment but will show how the parallel code process works.
Lynn

Table_comparison - how to compare data at a high level

Hi,
I have to do data validation at a high level between two tables that I am loading.
I am trying to use table_comparion transform but the problem is that my target table is at a much lower level than at which I want to compare data. So it has many more columns (both key and data fields) than what I want to compare.
Does the output of query transform ( which I am using as input into table_comparion) be in the exact same format as comparion table? If not, then can somebody suggest me something else.
Or how can I compare output of two query transforms ?
Thanks,
Saurabh Bansal

Dear Saurabh,
Not sure if you have already got the solution to this. If yes please close the thread.
If not, i would suggest you can use the validation rule to compare the two tables and then based on the PASS or FAIL result can check what needs to be done on the output.
Do post back if you have got the solution or you need any furthur help or else close the question.
regards,
Den

Phase out settings at a higher level such as brand or major customer

Have any of you ever setup phase out assignments at a higher level than product and had it work correctly? For example, we want to phase out a brand for a major customer. In other words, a customer is dropping a brand and we don't want statistical forecast generated for that brand customer combination any longer. I am able to setup the fields in phase out lifecycle settings for product, brand, major account but when i enter the brand and major account I am still getting forecast generated. It appears to stop for some products within the brand but not all. Another example is if a customer quits ordering from us I want to setup the major customer to phase out so no forecast is generated.
If you have done this successfully please let me know. Or if you would handle these situations in a different manner other than phase out please let me know. We can do historical adjustments each period but that is a lot of maintenance to do after each period before statistical forecast is generated.
Thanks
Steve

Hi Stephen,
Life cycle planning works only at the detail level (each CVC), the option of aggregate planning is helpful if you want to phase in or out a certain CVC when you are forecasting at the aggregate level.
One option is that you should have all products in the "profile assignment for life cycle " section which falls under that brand and customer. you can maintain a file and then automate the upload process in to the "assignment"
or
you can try to use the copy functionality in the realignment (/SAPAPO/RLGCOPY) , where you maintain copy factor as NIL and when the stat fcst is generated, you can use this as the next step to zero out -but you would need to maintain them manually.
or
easiest and safest wayy would be create a selection for those combination and do not include them in the planning job for stat fcst.
or
you can build a customised program to access the PA, PB, Data view and input the selection to zero out the stat fcst KF for that particular selection after the stat fcst run. here you would need to check if the diaggregated values are good enough.
hope it helps.

Computer freezes, then a low-volume, high pitch sound

Hello there,
My trusty 2002 MDD is randomly freezing on me for the 1st time! Disk Warrior nor Disk Utility form external boot-ups detect anything wrong. Thus, it doesn't seem to be a hard drive issue. Memory status on System Profiler checks OK.
Once the beach ball appears I can't do anything but press the power button to shut it down. I've noticed that while frozen a very low-volume, high pitch sound can be heard. ???
Thanks a lot for any feedback that you may provide,
Jacobo

Hatter,
Thanks for the prompt reply. Like you proposed, I've started from my FW drive (not after a freeze though) and everything drive-related checks OK.
Yes, my video card (Radeon 9800) does have a fan. I've though about this and the PSU as well. The latter is the quieter, less powerful one.
My drives are less than a year old and seem to be OK.
I’ve run Applejack (w/ memory check) and all is good.
Can the Apple Diagnostic CD pinpoint any of these issues?
My MDD has been incredible when it comes to reliability. She has not given me ANY problems whatsoever while stressed to its limits.
Thanks again for your time,
Jacobo

Errors in the high-level relational engine on Schedule Refresh Correlation ID: 7b159044-c719-41f9-8d0f-da6f73576d6e

Connections are all valid and work when I setup the Refresh but when the schedule refresh occurs I get this error:
Errors in the high-level relational engine. The following exception occurred while the managed IDataReader interface was being used: The Data Transfer Service has encountered a fatal error when performing the data upload. The remote server returned
an error: (400) Bad Request. The remote server returned an error: (400) Bad Request. Transfer client has encountered a fatal error when performing the data transfer. The remote server returned an error: (400) Bad Request. The remote server returned an error:
(400) Bad Request.;transfer service job status is invalid Response status code does not indicate success: 400 (Bad Request).. The current operation was cancelled because another operation in the transaction failed.
It is trying to refresh 3 simple tables with less than 9,000 rows each.
Also, i'd like to add that the refresh works right from excel as well...
Another fact just in, it seems to work on one out of 3 tables sometimes, so first table gets a success on the log, but sometimes it fails (It succeed twice and failed once with the above error). The second table never succeeds and gets the error above.
The 3rd table never even gets attempted.
Am I running into some sort of timeout perhaps?
loading
Failure
Correlation ID:
7b159044-c719-41f9-8d0f-da6f73576d6e
04/01/2015
at 01:50 AM
04/01/2015
at 01:53 AM
00:03:14
Power Query - Sendout_Records Not tried
Power Query - Positions Errors in the high-level relational engine. The following exception occurred while the managed IDataReader interface was being used: The Data Transfer Service has encountered a fatal error when performing the data upload. The
remote server returned an error: (400) Bad Request. The remote server returned an error: (400) Bad Request. Transfer client has encountered a fatal error when performing the data transfer. The remote server returned an error: (400) Bad Request. The remote
server returned an error: (400) Bad Request.;transfer service job status is invalid Response status code does not indicate success: 400 (Bad Request).. The current operation was cancelled because another operation in the transaction failed.
Power Query - Position_Activities Success.

This is not because of the number of rows, instead its the execution time. The query takes more than 7 mins to execute and seems this fails the refresh process.
Thank You

DI job causing high levels of I/O on database server

We have a DI job that is loading a sql server 2005 database. When the facts are loaded itu2019s causingu2019s a high level of I/O on the database server causing the DI job to slow down. No more than 5 facts are loaded concurrently. The fact dataflows all have a sql transform to run the select query against the DB, a few query transforms to do lookups to get dimension keys, and all do inserts to the target. The DBA says there are too many DB connections open and DI is not closing them. My thinking was DI would manage the open connections for lookup, etc and would close then properly when the dataflow is complete.
Any thoughts on what else would cause high levels of DB I/O?
Additional Info:
- Run the DI job, source and target tables are in SQL Server, and it takes 5 hours.
- Run the same DI job again, on the same data set, and it takes 12+ hours. This run will have high levels on DB I/O.
- But if SQL Server is stopped and restart, the job will again take 5 hours the first time it runs.
Edited by: Chris Sam on Apr 15, 2009 3:43 PM

There are a lot of areas of a DI Job that can be tuned for performance, but given the fact that your job runs fine after the database is restarted, it sounds like a problem with the database server and not the Data Integrator job.
There are a lot of resources out there for dealing with SQL Server disk IO bottlenecks. As a minimum first step all of them will recommend putting your .mdf and .ldf files on seperate drives and using Raid 10 for the .mdf file.

Multiple hierarchies with a shared higher level in OBIEE

Hello all,
I'm trying to create multiple hierarchies for a shared dimension in OBIEE. I have gotten these to work in the past when each hierarchy for the dimension all shares the common “grand total” level at the top, but I now I'd like multiple hierarchies that share a common higher level that isn't the grand total level.
Here's what I'm trying to do with a Customer Geography hierarchy. I want to give the user the option to drill from the customer "Country" and go either into "Cities" or "States":
Grand Total level
--->Country level
------> State level
---------> Customer detail level
------> City level
---------> Customer detail level
So "Country" is the common parent of "State" and "City", and "State" and "City" each have" Customer detail" as the lowest level. The Admin Tool let's me build exactly this in my RPD (with no errors/warnings), but when I go to drill on Country in an Answers report, I don't get the option to navigate down to State or City; it just automatically drills into the underlying states -- never shows cities.
I guess I was hoping there'd be a pop up option to ask the user which path I wanted to drill down on (kind of like what shows up for multiple navigation targets in an Answers request).
Am I missing a setup step in my RPD for this multiple hierarchy? Is a shared higher level multiple hierarchy even possible in OBIEE?
Thanks,
Jeremy
Edited by: OBI Wan on Mar 19, 2009 3:29 PM
Edited by: OBI Wan on Mar 19, 2009 3:30 PM
Edited by: OBI Wan on Mar 19, 2009 11:20 PM

Thanks mma for the help. I thought I saw in your reply this link as well to RittmanMead, but it's not showing up now?
http://www.rittmanmead.com/files/Advanced%20Development%20using%20OBIEE%20(ODTUG%202008).pdf
Anyway, on slide 37 of Rittman's presentation, that screen shot he has of Country, City, and State is exactly what I am attempting to do. I was hoping my issue would be a bit more straightforward than the recommended ragged hierarchy work arounds, but I may still have to do something like that in the end.
This issue just seems more simple than ragged hierarchies, because I start from the same level and end up back at the exact same level (instead of different destination levels as can be the case in ragged hierarchies). I don't know -- maybe my example is ragged as well.
If Rittman got that hierarchy in his screen shot on slide 37 to work like I'm trying to, then that would be perfect. :)

High-level C interface to OCI?

The OCI seems a little unfriendly in places, for example unnecessarily requiring you to pass string lengths when passing string parameters, using made-up types (e.g. ub4) when native types would probably do, and generally requiring the application developer to do a lot more work than necessary. Aside from going to Pro*C, is there an available higher-level abstraction of the OCI?
Thanks.

Some of this is a holdover from earlier days and versions also not all data types were the same across all the platforms OCI was ported to (16-bit, 32-bit, 64-bit). You needed types that could be considered absolute (like UB4). Now you are more likely to be able to use a -1 length when passing in a null-terminated string as well.

High level of transactions...

I have an app that will need to support a high-level of concurrency. What aspects should I incorporate in my JDBC code when performing updates to the database?
Thanks in advance!

no. as you can see from what i posted earlier, you can do transactions on a single connections just using jdbc.
ejbs buy you the following:
(1) declarative transactions, where you don't have to embed transactional behavior in your code.
(2) two-phase commit, where more than one database participates in a transaction.
you can do both of these things with Spring and its JTA support, so you don't really need ejbs at all.
%

High level user and Low level user

Hi to all gurus,
How SAP diffrentiates between high level user and low level users?? I mean if the licences are for 25 high level user and 50 lowevel users, than how SAP will categorize the high level and low level user licenses?? Is there anyway where BASIS person has to specify??
Thanks and Regards,

Ask your SAP Account Manager, he will be happy to explain it for you.
Regards
Juan

Is MCPD higher level certification?

Dear All,
I am working as a Sr. Developer and I have more than 5 years of experience on visual studio and sql server. I am planning to do certification. Please could anyone give me suggestion which is better for my professional.
I surfed on net and I felt MCPD could be better but I am not sure. Is MCPD ok? Please advice me and also about the cost. Is MCPD retired ? Is MCPD higher level certification? because I came across some articles that MCPD has been retired. Please confirm
me.
Please give me some links where shall I find the clear details of certifications.

MCPD ("Professional Developer") is not yet retired, but it will be soon. I suggest getting a newer MCSD ("Solutions Developer") certification. You can find all the details in this page:
https://www.microsoft.com/learning/en-us/visual-studio-certification.aspx

Volume higher level in Vista than OSX?

Similar Messages

Maybe you are looking for