Volume in Batch Capture

I'm bringing in video from my Vcr through a codec. In my Batch Capture, there's no audio when the media is coming through. Is there a way that I can be able to hear audio?
Can you help me?
Thank You!

Activate the Audio Preview checkbox in Log & Capture > Clip Settings.

Similar Messages

Batch capture issues

I am trying to break a tape into six clips from an interview. The total media time is about 2:30. I've logged the clips, highlighted the clips in the browser, clicked on the batch capture button before a dialogue box pops up and says the capture will use 19 minutes, 55 seconds of media time. I tried it several times. I'm wondering what's going on. I've had trouble capturing video ever since I upgraded to final cut studio a few months back. I use the same type tape, sony dv. and if this helps, the total amount of recorded material on the tape is more than 30 minutes.
I also tried to capture by clip after highlighting a clip in the browser but I kept getting error messages saying unspecified in and outs. Does anyone have any idea what may be the problem?
Am I losing my mind and overlooking something really obvious?

Check your Scratch Disk volume to see if it's formatted Mac OS Extended. Sounds like it isn't.

Troublw with Batch Capture

I am currently reimporting a sequence I originally edited in ProRes Proxy from AVCHD camera originals. I have made an off line copy of the sequence in media manager with 1 sec handles. When I batch capture the new sequence log and transfer finds all the correct original clips and begins the re-import process. I can watch the mov files being created in the scratch capture folder. After each mov file is created it is then mysteriously deleted when Log and Transfer moves on to the next clip. At the end of the process the final clip is automatically deleted from the folder leaving it empty. Manually importing clips from the same mounted volumes work correctly. This problem occurs no matter what the drive array I capture to and no matter what ProRes resolution I capture in. I am on FCP Ver.7. Anybody have any ideas how to remedy this situation. Thanks.

try capturing to your startup drive as a test. if that works, I would suspect a problem with the raid.

Batch Capture Lists

Has anyone been able to use Numbers to create a batch capture list for Final Cut Pro? I was able to do this all the time with Excel, just export as a tab-delimited file, then import that file into FCP. It's an easy way to log footage to perform a batch capture later on. Numbers won't export as a tab-delimited file. And I've tried exporting as a csv, but FCP doesn't recognize that file type. I love the simplicity and interface of the iWork suite much better than Office, I don't want to reinstall Excel just to use it for that one purpose.

Hello
If I understand well you wish to extract the contents of a group of cells as a TAB delimited file.
An easy way would be
select the block of cells
Copy to clipboard (cmd + c)
Create a blank Pages document
Paste (cmd + v)
Export the document as text file.
You may also use this script which is really easy to use.
Paste the script in a blank window of Script Editor
Save it as an application named cells2TSV.app
Move the newly created application into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications
Now, enter your Numbers Table.
Select the range of cells which you want to export
Copy to the clipboard
Now, go to
menu Scripts > cells2TSV
You will get on the desktop a Tab Separated Values file named:
-- (SCRIPT cells2TSV.app]
property nomDuRapport : "wasCellsnowTSV.txt"
set rapport to the clipboard as Unicode text
set p2d to path to desktop
set p2r to (p2d as Unicode text) & nomDuRapport
tell application "System Events" to if exists (file p2r) then delete (file p2r)
tell application "Finder" to set NewDoc to make new file at p2d with properties {name:nomDuRapport}
write rapport to (NewDoc as alias)
--[/SCRIPT]
Yvan KOENIG (from FRANCE mercredi 23 janvier 2008 22:14:49)

Unable to locate timecode in batch capture

Hi there, I have been working on this problem for a while and would really appreciate some help.
I have a documentary project I have been working on for some time and have completed the EDL. I am now trying to batch capture the footage again in full res and am having problems with a couple of the tapes.
First the specs:
The video was shot on a Sony HDR-HC1 in HDV(1080) mode.
I am using this camera to capture the footage.
I am trying to recapture the footage in a sequence with the easy setting on HDV1080i50.
I had originally captured the footage in SD on an older version of final cut pro (I am now working with FCP6) and didn't realise that my 16:9 footage was actually all 4:3 letterboxed. To fix this problem I used the media manager to export and then in the new project batch capture all the footage again from the tape. The project uses 18 tapes, 16 of which were batch digitised with only minor troubleshooting required. However 2 of the tapes are proving to be very problematic. It seems that whatever clip I select on the tape it gives me a message saying "unable to locate timecode".
I have tried setting the tape to the exact location of the clip before selecting the batch capture, but the computer always seems to look for a spot which is 2-3 mins out of sync with the clip. For example, if the in point is 00:10:00:00 the computer will roll the tape to around the 00:12:00:00 mark and start jogging around there for about 30 seconds until eventually giving me the "unable to locate timecode" message. Looking in the information in the bins, the in and out points are accurate, its just that when I try to capture, the computer rolls the tape to the wrong position.
If anyone knows a workaround for this that will help me avoid having to edit the footage all over again I will be extremely grateful.
Thanks
Liam

HI I have the same problem, the capture window says: Waiting for time code, the device must set in vcr mode and then This operation could not be complete as there is no video, the F!#!%$$ problem is very illogical ,at this mooring I do batch capture without a problem but since the second tape this problem starting, I update to FCP 6.0.4 and,. @@#%#@%#$ the first tape capture but the second not capture and the problem starting againd, note that IMOVIE capture the tape and work very well, iI replace fire wire, camera VCR and , I trayu with Canon, Sony, JVC and the problem persist , I have quicktime 7.4.5, FCO 6.0.4, note that I have two Macs with the same problem in both macs IMOVIE work like a PRO edition Software but FCP is very bad, I have with this problem a long time, I formated Mac, reinstall FCS2 many timers and the problem persist. IS not a problem whit easy setup or wherever , I download the FireWire SDK from Apple and test all connection with the applications of sdk and in all case , the camera and the fire wire are OK, the problem is with quicktime and FCP, If any one is working OK with FCP and DV NTSC devices and JVC PRO HD devices, please tell us HOW DO. I'm working with FCP since 2000 and in this month FCP makes me very UNHAPPY.

Batch capture settings do not match project settings

Batch capture audio settings do not conform to project settings-
PROJECT SETTINGS ON CREATION OF NEW PROJECT:
For editing with IEEE1394 (FireWire/i.LINK) DV equipment.
Standard NTSC video (4:3 interlaced).
48kHz (16 bit) audio.
Drop-Frame Timecode numbering.
General
Editing mode: DV NTSC
Timebase: 29.97fps
Video Settings
Frame size: 720h 480v (0.9091)
Frame rate: 29.97 frames/second
Pixel Aspect Ratio: D1/DV NTSC (0.9091)
Fields: Lower Field First
Audio Settings
Sample rate: 48000 samples/second
Default Sequence
Total video tracks: 3
Master track type: Stereo
Mono tracks: 0
Please note audio setting for project 48kHz (16 bit) audio.
When I set for batch capture by creating off-line clips using the "Log Clip" option the off-line clip shows audio as
32KHZ 16-bit everyting else is correct as project settings.
Just prior to creating the off-line batch capture clip I had sucessfully captured from the same device using the same tape shot with the above settings including 48khz 16-bit audio by using standard " Capture" by setting in & out then clicking Capture>In/Out.
I've looked at capture settings etc...unable to determine to change audio settings etc or why the audio settings under batch capture do not conform to project settings...
Any ideas?
Tnx,
mick

Thanks for your reply, Harm....
Well now...having negated all the possibilities you listed, I decided to do a an actual batch capture with clips which I previously logged which reported audio at 32kHz instead of the project setting of 48kHz:
1. two clips were selected from the same device/tape ( both selected from the logging util which erroneously reported audio at 32kHz) for the batch
2. both clips captured "flawlessly"
3. both clips after the batch capture then reported audio as being 48kHz
Btw, I also did a batch capture from the same device/tape in Pr 6.x...and it reported and captured at 48khz...I must say, I must prefer the legacy version of Pr 6 for batch capture which creates a log .pbl file which can then be easily exported as a csv to and .xls etc..IMO, much more useful...and useable..
Mi dos pesos(.002US)
So it would appear there is some kind of bug in the Pr cs4 batch capture util that is erroneously reporting audio settings?
Should this go to the devel as a possible bug?
Tnx,
mick

Unable to batch capture with Premiere Pro CC via Kona LHi

AJA's web site claims Premiere Pro CC is compatible with the Kona LHi card, but I can't get the two to work together properly. After repeated tries, I uninstalled and reinstalled everything AJA, but still no luck.
I need to batch capture DV clips from some mini-DV tapes on my Sony MVR035U tape deck. But I also need to upconvert them from 480i to 720p60 using my Kona Lhi card. I should be able to do this with Premiere Pro CC. But the PPCC Capture window won't give me any audio feedback when I select "AJA Movie Capture" in the Capture Settings pull down menu. I only get audio feedback when I enable "DV capture" but then I'm no longer able to upconvert.
Looking forward to any feedback on this issue. Been tying all day to trouble shoot this problem.
[Text formatting removed. Please type your posts here, rather than pasting.]
Message was edited by: Jim Simon

And now with CC June 2014 you can't even capture from HDV, I need to go back to Premiere CC 2013 for that....Adobe might think tape capture is over... but it isn't totally yet...

"No Video" error when Batch Capturing

I am getting a new error that I have not seen before when using Batch Capture in FCP. It cues the tape, starts the pre-roll and then spits out an error message that there is "no video". Of course, there is video.
The same thing does not happen when capturing one clip at a time nor does it happen if you capture live (hitting Capture "Now" in L&C window).
Any thoughts?

I also don't want to keep paying $23 a month for software that is not 100%.
Software as complex as Premiere Pro will never be 100% bug free.
I'm also inclined to believe this is more of a system issue than a PP issue. I don't recall other reports of this nature, and it works fine on my own system.
The only other thing I can think of to suggest is another FireWire port, possibly by adding a FireWire card to the system. I've read that the chip makes a difference, so research over in the Hardware forum.

Help! Batch Capture Changes My Logged Clips' Media Start & Media End

I'd be very grateful for any help on this.
I log a tape with about 40 clips ranging from 30 seconds to 4 minutes. I select the clips and start a batch capture. Everything appears to be capturing normally and I receive no error messages or dropped frame warnings - after my last clip is captured I get a "Successfully Captured" message.
However, as soon as I click "Finished," all of my clip media start's, media end's, and durations in the log window arbitrarily change to weird times. All my media start points are 26 frames too early (I've tripple-checked that "Add Handles" is indeed deactivated), and the media end points make no sense at all.
A clip that was once 44 seconds long is now only 12 seconds long, the media end point moved a whopping 34:03 too early. Another clip will become 2 seconds longer, the media start point still shifted back 26 frames, but with the media end now 31 frames too late. Checking the original files on my drive confirms that only these weird, unusable segments are what has been captured.
What complicates things is that I just discovered today that if I capture locally to my internal hard disk, the clips capture normally (the times remain unchanged). But if I set my capture scratch to my external hard drive (a LaCie F800 2-TB RAID-5 using Firewire-800), that's when the clips start changing themselves. I ran disk utility and found no errors on the drive, and have never had a problem with it or any part of my configuration until the last month or so... the only changes to my system being the regular use of Software Update.
On top of that, my colleague is experiencing a similar problem with batch capture changing his clip times, even though he is using a different computer (single-processor G5), a different video deck (Sony DHR-1000), and a different storage medium (Apple Xserve RAID).
So my question is: What is happening! The only thing I can think of is that perhaps some update has a bug - but I can't find anyone with a similar problem online.
Any help on this would be extremely appreciated! Thank you in advance for your advice.
Dual 2.3GHz PowerPC G5 Mac OS X (10.4.4) Deck: JVC CU-VH1 / Storage: LaCie F800 2-TB RAID-5
Dual 2.3GHz PowerPC G5 Mac OS X (10.4.4)

Here's an update on this. Both my colleague and I have confirmed that if we capture to an internal or external drive that is not a RAID FCPro batch captures just fine.
But, if the drive we are capturing to is a RAID (in my case a LaCie Biggest F800 and his case an Apple Xserve), then we get dropped frame reports and/or clip in's and out's changing after the batch capture is complete.
We even tried reformatting one of the xServe's and rebuilding it as non-journaled, it didn't solve the problem.
It seems impossible that we're the only ones to be experiencing this problem... does anybody have any help or suggestions!?

Batch capture problem

I'm trying to batch capture my clips, so i logged them all but when i select them all and choose batch capture an error comes up after a while and says "end of tape reached". The only footage i have on my tape goes from the beginning of the tape to about three minutes in. Can someone please help me here.
thanks,
Paul

Don't know if you are still looking for a solution to this but...
You most likely set your in point very near the first code on the tape. FCP needs to roll back a few seconds, before the in point, in order to ensure the deck gets up to speed before the capture begins. If it rolls back and can find not code before your in point, things get confused and FCP will not do the capture. This is also why, when shooting, you should always roll at least 5 seconds before the action starts.
Try moving the in point forward at least seconds.

Batch Capture is saying total media time of 3 hours 27 mins...

... for a 23 minute show.
I have collapsed the multi clips, gone to media manager, deselected include non active angles, choose to delete unused media with handles of 1 sec. Why is it still saying it needs 3 hours 27 mins? Please if anyone can help I'd be grateful.
This software is useless and I am sorry for sounding off, its not the place to do it but seriously I am in a broadcast environment and I am beginning to look stupid in front of my client.

The reason for that could be that you select everything in timeline and browser , try to select just the original clip before you made it a multi clip. Final cut some how calculates everything as soon a clip is a multi-clip or on the timeline the batch capture select the entire video.
I had the same problem, but then i just selected my original clip and it worked out fine. I only had some problems with the multi clip but apparently 6.0.3 fixed that ( not sure)

Batch Capture Error: Timecode Error: End of Tape Reached

I have been having issues doing batch capture with my JVC VS30U. I logged all my clips on the fly and did the entire tape, so the OUT point of one clip is the same as the IN point of the next clip. When I attempt to batch capture it gives this error between every clip.
I have to hit retry, sometimes more than once, in order for the deck to properly cue and FCP to start the digitize. I don't know if this is a weird pre-roll issue, or something else, but it completely defeats the purpose of a batch if I have to sit here and hit retry after each clip.
There are no TC breaks, and obviously its not really the end of the tape. I've read where people have similar problems, but didn't find a solution. Have already trashed prefs, but to no avail. Using FCP 5.0.4 with OS 10.4.3 and said JVC deck via firewire.
Any ideas? Thanks in advance!

I don't know the deck but a simple test would be to move a couple of i/o points so they are not adjacent. Or test with a single, longer clip and break it up into subclips.
Tell us what you've tried so we don't waster your time and ours with fruitless suggestions.
Errors displayed by FCP are usually irrelevant and rarely helpful.
bogiesan

HDV batch capture is making new clips...

thanks for watching...
i have imported batch lists into FCP with name, media start, media end, reel and log note just as the FCP manual instructs. they import fine and i have them all in their own bins.
i batch captured a few tapes to day and i noticed that FCP is making new clips at times. for instance i'll have a clip "dogs" in the original batch list. after the batch capture there will be "dogs" and "dogs -1" the starting time code of "dogs" and the ending timecode of "dogs -1" are the original start and end of the clip. so, FCP has spit this clip in two for some reason. why is that?
i thought it might have to do with the setting "make new clip on Start/stop" thats listed in the clip settings tab of the log/capture window. so i made sure this was unclicked and then tried another batch , also making sure to uncheck "use original clip settings" in the batch window. but, the problem still persists.
i have 30 tapes to digitize and i'd prefer the clips matched the batch lists. any ideas i can try to solve this problem?
take care,
max

Is it a new media drive?
how is your media drive formatted? highlight the drive on the desktop and press command(apple)+i to get info...
Where it says 'Format' it should read Mac OS Extended... does yours say FAT 32 by any chance?
FAT32 is a different format that can be read by PCs and Macs... it can only store file sizes of 2Gb, so has the knock-on effect of causing FCP to break captures into smaller chunks.
If your drive is FAT32 you need to re-format it using Disc Utility. When you do this, you will lose everything on that drive, so back it up if possible.
If your drive is formatted correctly, post back with your media set-up, ie - what drives you use, how is your capture scratch configured etc.

Batch Capture Changes Media Start, End, and Duration

Hello all... For some reason, when I batch capture from an imported batch list in FCP 4.5, the program changes the media start, end, and duration just slightly once the capture has completed. Does anyone know why this might be occurring?

OK... I don't believe it has to do with drop frame or non-drop frame issues, and here's why... I ran a series of tests.
The footage was originally shot with two cameras, an A Cam and a B Cam, which were Jam Synced together. The original A Cam tapes were log and captured normally. But for the B Cam tapes, we exported a batch list to excel, performed a rename function where _B was added to all file names and reel names, and brought the data back into FCP by importing a Batch List at 29.97.
For the tests, I experimented with only one clip. First, I noted the timecode for the media start and media end when the file was uncaptured. Next, I placed the A Cam Tape in the deck and did a batch capture on the one clip. The program changed the media start and end times upon hitting ok. Here were the results of the first test:
LOGGED: MS (05:50:39:26) ME (05:51:41:01)
CAPTURED A CAM: MS (05:50:39:17) ME (05:51:41:07)
Then, I undid the capture so that the timecode would revert back to the precaptured state. I placed the B Cam tape in the deck and ran the capture again, on the same clip, in Batch Capture mode. The program changes the media start and end yet again, but this time, changed it in a different way:
LOGGED: MS (05:50:39:26) ME (05:51:41:01)
CAPTURED B CAM 1st Attempt: MS (05:50:39:16) ME (05:51:41:06)
So then I undid the capture again to revert back to the logged settings, and put the EXACT same tape in the deck, and ran the batch capture in exactly the same way. This time however, FCP didn't change anything. It logged the clip correctly. I tried it yet again, in the same way, and it did it perfectly again:
LOGGED: MS (05:50:39:26) ME (05:51:41:01)
CAPTURED B CAM 2nd Attempt: MS (05:50:39:26) ME (05:51:41:01)
CAPTURED B CAM 3rd Attempt: MS (05:50:39:26) ME (05:51:41:01)
So I ask again... what is up with FCP 4.5?

Batch capturing entire tape...recomended???

Is it a good idea to attempt to batch capture a tape in its entirety? I am having problems doing this...I do a lot of events that last often over 2 hours. Instead of capturing footage in clips, I just capture the entire tape. When I'm done with the project, I simply make the clips offline.
I'm in the process of reviving a project now, and one tape in it's entirety(55 min approx), captured OK, but I am having problems with another tape. I am getting a broken timecode error, when I don't see how this is possible...because I let the tape freely run. Also, under the logging info, the media ends before the tape ends, which means that is space left on the end of the tape without any timecode. Yet when I batch capture, it still goes to the end of the tape.....isn't a batch capture suppose to go by the clips media in and media out points?
All help is greatly appreciated.

I do this often. There are two shools of thought on this method -
Capturing entire tapes allows one to scroll through non-linearly and make subclips. The advantage to subclips is that they are serachable and you can add comments. The downside to this method is that the files are large, and you may be capturing much more metarila than you need. I often do this when working on docs with very high shooting ratios. The most recent one had 190 tapes for a 1-hour program, which led us to use offline RT for our cutting format and then recapture for online.
Logging and capturing single clips fives you the advantage of starting out capturing only what you know you might use, you can input the logging info at the start, and will have several small clips that may be easier to manage. Since at some point you'll have to familiarize youself with the matreial anyway, you might as well do it at the logging stage.
Several factors can contribute to perceived TC breaks - reusing tapes, camera stops, shooting format (HDV, for instance, will show a TC break each time the camera stops). If you are capturing whole tapes, you might do well to let FCP create new clips on TC breaks and just let it roll. Make sure the TC format matches between your tape and settings (DF vs. NDF)
Regarding rolling off the end of the tape during capture, you might be very close to the end with the clip you are capturing. You might try lowering the post-roll value in the device control preset in your A/V settings.
Hope this helps -
Max Average

Volume in Batch Capture

Similar Messages

Maybe you are looking for