Volume in fav folder doesn`t work

A bug I assume, but "volume" seems to be the only effect in my favorite folder which doesn't work after I restart the program (load it up, etc...). It'll give me a circle with line going through basically showing me invalid. It'll work when I take it from the audio bin, it'll work when I put the effect into my favorite bin and then onto the clip, but not after I start up the program afterwards. I'm running CS6 on W7, anyone else having this issue?
Mike

True, I can do that as well, thanks.
I still feel bothered by the bug though, each way has its pros of working, like copy-pasting the effect.
Mike

Similar Messages

WebDAV: delete or rename of a folder doesn't work in XP clients

Hello!
I provide file sharing via WebDAV to some Windows XP clients.
The clients can create files and folders, but they can't rename folders (renaming files does work).
When I mount the WebDAV-Folder in MacOS, renaming folders does work perfectly. I can see a difference in the MOVE command in the apache log: MacOS sends a trailing slash, XP doesn't. This results in an error on XP.
The same behaviour is true for deleting a folder - doesn't work also.
Does anybody know a solution? Dows it worl for your setup?
Thanks & best regards,
Steve.

Thanks cor-el,
That's exactly what I've done - by accident, clearly!
Ah well, panic over...
Thanks again,
Si

Volume and Power button doesn't work..how do I fix?

My son's volume buttons or the power button doesn't work. Is there something I can do to fix these issues?

Try the following to rule out a software problem.
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

PDF Maker Issue - can't find add-in in adobe folder, doesn't work in MS Office 2010.

Hi Guys,
Since last few years I've been using Adobe Acrobat Reader (IX, X, XI) on my Sony Vaio.
It was integrated with MS Office 2010 and worked perfect with Outlook, Word, and Excel.
Last week I had serious isues with my notebook and had to do a clean instalation of Windows 7 64-bit.
I installed all software back (Eset Endpoint Antivirus 5, MS Office 2010 32-bit, etc.) and at the end, yesterday
I finally installed Adobe Acrobat Reader XI (free). Then I noticed with dissapointment that there is no Adobe ribbon.
I did everything mentioned here PDFMaker unavailable | Office 2007, Office 2010 | Acrobat 9, Acrobat X, Acrobat XI
including instalation in a simplified mode, but it doesn't work for me.
The path mentioned in above link doesn't exist in my computer "C:\Program Files\Adobe\Acrobat [9.0 or 10.0]\PDFMaker\Office".
I can find only: "C:\Program Files (x86)\Adobe\Reader 11.0\Reader" - a path to AR app. There is no PDFMaker folder at all.
And another path: "C:\ProgramData\Adobe\Acrobat\11.0\Replicate" - Replicate is the only folder under "11.0".
Do You have any idea what I could do to instal PDFMaker module , and use it with MS Office 2010?
Sorry for my poor English.
I'll be very gratefull for help.

If you have all of those Adobe Reader products on your system, you are asking for problems. Adobe states one should not have more than one copy of an application on their system.
Reader has no plug-in for MS Office of any version.
Only Acrobat has a plug-in for MS Office. Again Adobe does not approve of more than one copy of Acrobat on a system. And if you dare to have Reader on the same system then Acrobat and Reader should be at the same major version.

Find files in folder doesn't work

To make my photo galleries, I use CS5, because this is the last version that can use modified galleries that I was able to since CS3. My modified pages have links to other pages on my web site, while the ones that now come with Photoshop are dead end with no links.
So, another feature lost in later Bridges is the ability to show ALL the contents of a folder and its subfolders. To get around this, I choose to show folders whose metadata or filename DO NOT contain zzz, since none do. This has worked fine and I have made hundreds of galleries from my phylogenetic folder trees of species.
     Until I came to this gallery of Tachinidae. I have been updating all my Arthropod species galleries After I did the usual procedure, and created the gallery (and deleted the previous gallery both on my PC and the web), I noticed that the first image was a Belvosia, and there were non of the Archytas or other species that should have come before, alphabetically. I tried again and found that it was ignoring a lot of files in some subfolders that should have come up. I tried other finds, like all files ending in .tif, or all that had the keyword Tachinidae, and always the same result.
     Then I tried the same search in CS6 and it finds all, but of course I can't make my galleries here, I went back to CS5 and made a new folder TACHINIDAE 1 and moved all the files there and tried again, with no success. I tried a backup file with the same result. Rebooting didn't help.
     Today I tried again and as it did the search, I could see it indexing the Archytax subfolder and others that were not included, but now after over 30 minutes, all I have is a spinning circle and no items. I had gone back to other folders that I had made galleries of just before and they pull up all the images, as before, but this has stopped my progress in this project dead in my tracks.
     I can't make any sense of this at all.

Well now it's not working at all. I moved the folder to a higher level of my directory tree, with the same result. then I just tried a subfolder and it quickly found that there were no images, either that didn't have zzz or that ended in .tif.
Than I tried another family folder and it quickly found no images according to the criteria. So now the search function just doesn't work.

Possibility to choose displayed perspectives in folder doesn't work

On the folder level is possible to choose displayed subfolders and perspectives from availables. Only these subfolders and perspectives should be displayed in the folder. Subfolders works OK, perspectives are displayed all without respecting this setting. Portal version is 3.0.9.8.1 on NT.

Well now it's not working at all. I moved the folder to a higher level of my directory tree, with the same result. then I just tried a subfolder and it quickly found that there were no images, either that didn't have zzz or that ended in .tif.
Than I tried another family folder and it quickly found no images according to the criteria. So now the search function just doesn't work.

FileXtra4 problem - default folder doesn't work.

Don't know why this doesn't work, but the default folder
setting in the
FileXtra open/save dialogues doesn't seem to work as
advertised. My code
goes like so:
currentLevel = fxObj.fx_FileOpenDialog(the moviePath &
"\Levels\","*.lvl","Load Level",False,True)
the moviePath & "\Levels\"
should be the correct folder, but instead, it always defaults
to My
Documents for some reason. (When running as a projector. In
Authoring
mode, it defaults to the moviePath, but ignores my
sub-folder.) Either way,
it never gets it right the first time. The second time and
subsequent
times, it always goes to wherever you last opened something,
but the first
time is always wrong. I did notice that the example in their
documentation:
put fxObj.fx_FileOpenDialog("C:\My Documents\", "Text
Files/*.TXT","Choose a
text file", True, True)
does use My Documents as its default, but I've changed that,
so it should be
going to the folder I pointed it at.

Without looking too deeply, I think I remember that, yes, it
doesn't work.
I usually end up using BuddyAPI for this.
Craig
"Darrel Hoffman" <[email protected]> wrote in message
news:fm362a$ep7$[email protected]..
> Don't know why this doesn't work, but the default folder
setting in the
> FileXtra open/save dialogues doesn't seem to work as
advertised. My code
> goes like so:
>
> currentLevel = fxObj.fx_FileOpenDialog(the moviePath
> "\Levels\","*.lvl","Load Level",False,True)
>
> the moviePath & "\Levels\"
> should be the correct folder, but instead, it always
defaults to My
> Documents for some reason. (When running as a projector.
In Authoring
> mode, it defaults to the moviePath, but ignores my
sub-folder.) Either
> way, it never gets it right the first time. The second
time and
> subsequent times, it always goes to wherever you last
opened something,
> but the first time is always wrong. I did notice that
the example in
> their documentation:
>
> put fxObj.fx_FileOpenDialog("C:\My Documents\", "Text
Files/*.TXT","Choose
> a text file", True, True)
>
> does use My Documents as its default, but I've changed
that, so it should
> be going to the folder I pointed it at.
>

[solved] Volume control in amarok doesn't work anymore

Hi,
since today in amarok (2.4.1) the volume control doesn't work anymore. I can change the level on the switch on the top right but it doesn't change the actual volume.
The volume control in my KDE tray works as usual.
Last edited by Barghest (2011-07-05 18:01:07)

Just came back from suspend and it works again.
Sorry for the noise.

Using Table.Join formula takes extremly long time to get results.(Why Query Folding doesn't work?)

Hi,
I built a query with 4 tables inside (load from Oracle DB and two of them are quite big, more than millions of rows). After filtering, I tried to build relationships between tables using Table.Join formula. However, the process took extremly long time to
bring out results (I ended the process after 15 mins' processing). There's a status bar kept updating while the query was processing, which is showed as . I suppose
this is because the query folding didn't working, so PQ had to load all the data to local memory first then do the opertion, instead of doing all the work on the source system side. Am I right? If yes, is there any ways to solve this issue?
Thanks.
Regards,
Qilong

Hi Curt,
Here's the query that I'm refering,
let
    Source = Oracle.Database("reporting"),
    AOLOT_HISTS = Source{[Schema="GEN",Item="MVIEW$_AOLOT_HISTS"]}[Data],
    WORK_WEEK = Source{[Schema="GEN",Item="WORK_WEEK"]}[Data],
    DEVICES = Source{[Schema="GEN",Item="MVIEW$_DEVICES"]}[Data],
    AO_LOTS = Source{[Schema="GEN",Item="MVIEW$_AO_LOTS"]}[Data],
    Filter_WorkWeek = Table.SelectRows(WORK_WEEK, each ([WRWK_YEAR] = 2015) and (([WORK_WEEK] = 1) or ([WORK_WEEK] = 2) or ([WORK_WEEK] = 3))),
    Filter_AlotHists = Table.SelectRows(AOLOT_HISTS, each ([STEP_NAME] = "BAKE" or [STEP_NAME] = "COLD TEST-IFLEX" or [STEP_NAME] = "COLD TEST-MFLEX") and ([OUT_QUANTITY] <> 0)),
    #"Added Custom" = Table.AddColumn(Filter_AlotHists, "Custom", each Table.SelectRows(Filter_WorkWeek, (table2Row) => [PROCESS_END_TIME] >= table2Row[WRWK_START_DATE] and [PROCESS_END_TIME] <= table2Row[WRWK_END_DATE])),
    #"Expand Custom" = Table.ExpandTableColumn(#"Added Custom", "Custom", {"WRWK_YEAR", "WORK_WEEK", "WRWK_START_DATE", "WRWK_END_DATE"}, {"WRWK_YEAR", "WORK_WEEK",
"WRWK_START_DATE", "WRWK_END_DATE"}),
    Filter_AolotHists_byWeek = Table.SelectRows(#"Expand Custom", each ([WORK_WEEK] <> null)),
    SelectColumns_AolotHists = Table.SelectColumns(Filter_AolotHists_byWeek,{"ALOT_NUMBER", "STEP_NAME", "PROCESS_START_TIME", "PROCESS_END_TIME", "START_QUANTITY", "OUT_QUANTITY", "REJECT_QUANTITY",
"WRWK_FISCAL_YEAR", "WRWK_WORK_WEEK_NO"}),
    Filter_Devices= Table.SelectRows(DEVICES, each ([DEPARTMENT] = "TEST1")),
    SelectColumns_Devices = Table.SelectColumns(Filter_Devices,{"DEVC_NUMBER", "PCKG_CODE"}),
    Filter_AoLots = Table.SelectRows(AO_LOTS, each Text.Contains([DEVC_NUMBER], "MC09XS3400AFK") or Text.Contains([DEVC_NUMBER], "MC09XS3400AFKR2") or Text.Contains([DEVC_NUMBER], "MC10XS3412CHFK") or Text.Contains([DEVC_NUMBER],
"MC10XS3412CHFKR2")),
    SelectColumns_AoLots = Table.SelectColumns(Filter_AoLots,{"ALOT_NUMBER", "DEVC_NUMBER", "TRACECODE", "WAFERLOTNUMBER"}),
    TableJoin = Table.Join(SelectColumns_AolotHists, "ALOT_NUMBER", Table.PrefixColumns(SelectColumns_AoLots, "AoLots"), "AoLots.ALOT_NUMBER"),
    TableJoin1 = Table.Join(TableJoin, "AoLots.DEVC_NUMBER", Table.PrefixColumns(SelectColumns_Devices, "Devices"), "Devices.DEVC_NUMBER")
in
    TableJoin1
Could you please give me some hints why it needs so long to process?
Thanks.

Watch Folder doesn't work with cineform codec - help needed

My computer is a:
2x Intel Xeon Processor E5-2650 (2000 MHz, 20MB);
16x Kingston DIMM 8 GB PC3-8500 ECC Reg.;
PNY Quadro 4000 with 2048 MB GDDR5-RAM;
2x 2000 GB Western Digital RE4 (7200 UPM/S-ATA II) as a RAID I
1x 120 GB OCZ Vertex 3 SSD
1x 240 GB OCZ Vertex 3 SSD (system disk)
Tyan S7050GM4NR motherboard
Windows 7
with the actual version of media encoder cc and as codec I use cineform GoProStudioPremium-2.0.1.319
I have about 2000 files to be converted from cineform avi with 4k resolution to cineform avi with 1920x1080.
All files are pre-keyed and have rgb+alpha (4:4:4:4).
When I add the folder to the "watch folder"-list then it encodes the first few clips and then I get the error message:
the AMEEncodingErrorLog shows:
- Encoding Time: 00:00:00
03/26/2014 12:27:49 AM : Encoding Failed
A low-level exception occurred in: CineForm AVI File (Exporter)
A low-level exception occurred in: CineForm AVI File (Exporter)
Export Error
Error compiling movie.
Unknown error.
My cineform settings are:
Does anybody know how to solve the problem or any workaraound?
What I already tried is to drag and drop a "few" files, for example 50 clips manually into the ame. What then happens is that the media encoder crashes completely.
I've got a client that needs all those files converted until the end of this week, so I would be really happy if anybody could help me.
Or has anyone an idea for another encoder I could use? I also tried it with telestream episode but it does not support avi container with cinepro-codec...
VirtualDub doesn't support alpha channels, so which program could work?
Best regards,
Wolfram

Hello Nariman,
thanks for your answer
1. Exactly what version does it say you have?
Version 7.2.0.43
2. what happens if you open other types of files like .MOV or WMV and convert to Cineform?
I tested it with mov- and wmv-files:
No, same problem: [..\..\Src\LegacyTime.cpp-101]
3. what happens if you take your Cineform files and convert them to other formats like H264?
This works fine.
4. How large or small are your files?
The size of the files is between 70MB and 300MB, but 90 % of them are between 90MB and 130 MB.
5 Are these stills or movies ? How many minutes?
All items are pre-keyed movies (which I exported from after effects via media encoder to the 4k-cineform files). The length of all files is between 2 und 5 seconds.
6. Are you using 3rd party plugin to import and export Cineform?
I have got the cineform studio premium codec installed. It shows up directly in the media encoder options. So I don't use anything else than media encoder and the cineform codec

Search files in current folder doesn't work

When I search my whole mac for e.g. "Danse Macabre" i get the results from all over the place, which is to be expected.
So when I go into the folder I get a list of files including the one I was searching for. So far so good.
While typing in a new search inside that current folder, the file list refreshes and still shows me all files in that folder, even though the search string isn' part of most of the names:
When I actually specify to only look at the actual file names, the list shows only the file including the actual string. Unintuitive but acceptable. Just pressing the enter key will still show the whole unfiltered directory.
However - and that is my real grip - when I want to find specific files, e.g. all files containing the string "cab" then this happens:
The list empties the moment I type in the third letter, which doesn't make any more sense than showing all files when typing in the first letter. And when I actually commit the search which should show me all files containing "cab" in the name, I got nothing.
This makes the search feature in finder completely useless.
What's going on?
And how do I fix it?

I played around with this a little.
Although typing into the folder search field gives you an option labeled "Filename contains…", what you really seem to get is a search for "Filename contains a 'word' that begins with…."
A new "word" in the filename can be the beginning of the filename, anything that comes after a punctuation character, or a case change. The matching criteria itself ignores the case.
So in your example, you had a file named "01 Danse macabre.mp3", and a filename search for "cab" didn't find it. I think that is because "cab" is in the middle of the string, and is not a "word" as defined above. As an exercise, I renamed one of my own files as "01 Danse macabre.mp3", and as expected, searching for the filename "cab" didn't find it. However if I then capitalized the "C" so that the filename was "01 Danse maCabre.mp3" then a search for "cab" did find it:
"Cab" starts a new "word" because of the case change. The search itself is case-insensitive, so that searching for "cab" finds "Cab".
This shows the problem, but doesn't fix it. As a work-around, instead of using the top-right search field to type in "cab", instead hit command-F to bring up the search window. Change the initial "Kind is Any" line to "Name contains". Now you get a true "contains" search instead of a "word begins with" search. When I searched for "cab" this this way, I did find "01 Danse macabre.mp3":

Querying items in folder doesn't work in SharePoint 2013 (Cloud)

Hi,
I have 2 folders in a SharePoint List. Every folder contains 2555 items. There is only one column "Title" . I have indexed the "Title" column. The title field contains same values as "Hello" for each and every record.
I am querying the first folder and it throws following exception that
"An unhandled exception of type 'Microsoft.SharePoint.Client.ServerException' occurred in Microsoft.SharePoint.Client.Runtime.dll
Additional information: The attempted operation is prohibited because it exceeds the list view threshold enforced by the administrator."
But If I add a new item with "Title"="World" in both the folders, and query the first folder, putting the condition that get count where "Title" = "World", it works fine and the count returned is "1".
Can anybody please tell me, why I get the exception and what is the fix for that.

Hey Ravi,
Threshold can not be modified in
Office 365/SharePoint Online. Have below link for more details and workarounds.
http://support.microsoft.com/kb/2759051
SharePoint Online 2010 List View Threshold
http://community.office365.com/en-us/f/148/t/79787.aspx
Thanks.

The volume on my mac doesn't work

I plugged my speakers to my MacBook and then it started to sound blurry so I umplugged them quickly and now it doesn't sound at all. When I try to turn the volume up, and below the little volume squares, is this sign and the little speaker appears gray. I restarted it three times and it stays the same. Please, help me, I'm really worried, my computer is new. Thank you

Hopefully one of these steps should solve the problem.
1. System Preference > Sound > Output > Internal Speakers
    Highlight Internal Speakers / Headphones
    Make sure that Mute is not enabled.
2. Remove the headphone.
    If you see red light in the headphone port, plug the headphone
    in and out of the port 5 or 6 times to flip the microswitch inside.
    Sound output may be stuck in the digital mode.
3. Reset PRAM. http://support.apple.com/kb/PH4405
4. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
5. Applications > Utilities > Audio MIDI Setup
    Audio Devices window
    Side Bar
    Click the Built-in Output.
    Under Mute any of the boxes checked? If so, uncheck it.
6. If none of these steps is helpful, plug in the headphone and reset SMC.

Hide Volume als Login Item doesn't work

Hi folks!
When I login into my account on my mac all network volumes appear despite the hide-configuration in login items. Are there any ways to resolve that issue?
Thanks...
Timi

see this link for a workaround
http://discussions.apple.com/thread.jspa?messageID=10511740&#10511740

"Search for missing links in this folder" doesn´t work anymore

Just upgraded to CS6 for Mac on Snow Leopard and the Search for Missing links function no longer works. Does anyone have any idea of how to fix it?

Is it set in your prefs? It's optional....

Volume in fav folder doesn`t work

Similar Messages

Maybe you are looking for