Volume in my iPod stop working?

My iPod volume stop working. There is no voice except the ring tone.
Would u please help. Thanks

Do the headohones work?
Try the standard fixes:
- Reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod
If still problem then time for an appointment at the Genius Bar of an Apple store.

Similar Messages

  • Volume and Lock buttons stopped working after new iOS 4.3.3 update (ipod 4th gen)

    After I updated my ipod with the iOS 4.3, the volume and lock buttons stopped working.
    This has happened before and it'sprobably one of the most annoying problems ever.
    The lock button tends to stop working but then works again only when it wants to, but the volume buttons dont work at all.
    When the locked button worked again I turned it off and turned it on again, but it didnt fix the problem.
    I've pretty much tried everything that I've read and nothing seems to work.
    So now, I don't know what to do.
    Should I take it to a random apple store or to where I bought it from?
    It seems that it's happening to almost everyone, so at least I'm not the only one and maybe someone can help me out

    If you have restored in iTunes on a computer and the problem remains then it's a hardware fault and it needs to be repaired. When you update the iOS version on an iOS device it checks the hardware components, this is when it'll detect un-diagnosed hardware faults and the components will stop working... even if they were working previously

  • 5th Gen ipod stopped working , connected to Alpine CDA117

    Out of nowhere the ipod stopped working when hooked directly to the Alpine CDA117.
    It worked this morning when I pulled out of the driveway and drove to my shop . I did not unplug it when I arrived, it stayed in the car hooked up as it does often.
    When I got back in the car about 2 hours later it was not working . It recognizes the ipod , shows the song , playlist etc but no volume and it's not "playing" so it's sort of on "pause", but not showing that it really is "paused"
    Apple looked at it , thought there might be some dust on the contacts , cleaned it , tried it in the store and it worked fine both with earbuds and through speakers.
    It works in my wife's car via the same hookup.
    My wife's ipod works in my car hooked up just as mine would be .
    The guy at Best Buy who hooked it up , hooked his up and his worked fine.
    Firmware is up to date .
    I literally did nothing to it once I arrived and my shop and then got back in the car 2 hours later.
    Help me !
    I have a 3 hour ride up to the Berkshires on Saturday and will go bonkers without my music .
    Edit/Delete Message

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My iPod stopped working with the USB in my car but still works on it's own. Any suggestions?

    My iPod stopped working with the USB in my car but still works on it's own. Any suggestions?

    Read the car user manual and/or contact the car dealership.
     

  • Ipod stopped working with iTrip

    My iPod stopped working with my iTrip very mysteriously. I left it in the car for 2 hours (as I always do at work) and it worked when I left and wouldn't work when I went to drive home. I've replaced the iTrip and know that it works with another iPod (identical to mine and bought at the exact same time).
    Does anyone know if there's way to fix this?

    I just started having issues with my iPod as well. It is paired with my JVC receiver through an iPod adapter. I can normally control my iPod through the JVC once it is connected, but the last few days I have had to control it through the iPod itself. The screen on the receiver says connecting, but never does unless I do manually.( pressing play on the iPod). I can still see song titles, but no control. IE pause, next or previous songs. Nothing seems to work, and have treid powering both off then back on. Is this an update issue that wont let them pair anymore? I also tried a friends iphone and seemed to work fine with the JVC, so the receiver is not the issue.

  • My iPod stop working....

    My iPod stop working...
    I load my pictures in and now my screen shows only red letters and nothing else!!!
    what should I do?
    pachy

    I did try that by doing everything the manual book said:
    1. connect iPod to a power outlet using the iPod Power adapter (I did)
    2. Toggle the hold switch on and off...yes I did turn on and off and on and off..
    3. press and hold the select and menu buttons..for at least 6 seconds (I did 1 min and nothing happened still) until the apple logo appears.
    Besides the software failure, the power is still on ... and I CAN'T TURN IT OFF neither!!!!!
    what other alternate tips or troubleshooting ...are there that will solve this problem? Thank you
    Do I really need to make an appointment and go down to Genius BAR?
    Thank you again and please help me
    pachy

  • The volume on imovie09 suddenly stopped working.  How can I fix the audio volume?

    The volume on imovie09 suddenly stopped working.  How can I fix the audio volume?
    I have no idea what triggered this.  Other projects work with volume.  But my current project will play the audio but no volume. HELP please.

    How exactly stopped working?  Three things to try
    Using Windows Explorer navigate to C:\Program Files (x86)\Adobe\Reader 11.0\Reader, then double-click on Eula.exe and accept the license agreement
    Can you open Adobe Reader by itself?  If so, try disabling Protected Mode [Edit | Preferences | Security (Enhanced)].
    It could even be a malware issue; see http://helpx.adobe.com/acrobat/kb/reader-core-dll-error.html

  • HT1339 My ipod stopped working a few years ago, it said i had to connect to itunes to restore, as i then got an iphone i never bothered to sort it, I am now trying to and hwne i connect to itunes it says it must be restored, After ive...

    My ipod stopped working a few years ago, it said i had to connect to itunes to restore, as i then got an iphone i never bothered to sort it, I am now trying to and hwne i connect to itunes it says it must be restored, After ive restored it nothing happens, at first it says "ipod has been restored and is restarting, it will appear in the itunes window once it has restarted" so i wait but nothing happens and eventually it comes up with the same message telling me the ipod needs to be restored?

    Errors when updating leads to corrupt system files and this may be your problem. If you're using windows, connect your device to PC and run any third party app like Syncios. If it detects, you maybe in luck and try to back-up your data if possible. I hope that it won't and if doesn't, there is no other way to recover files. You should be restoring with iTunes and all data will be erased, or else your device may become unusable.

  • Ipod stopped working since downloading itunes 7

    Hi all,
    Downloaded itunes 7 and my ipod has stopped working. every time i connect the ipod it crashes my laptop. sometimes the laptop recovers so i restore the ipod but the music keeps skiping etc. ipod does make some strange sounds when running. has the ipod come to its end of life? Oh i have the ipod 4G.
    Thanks to anyone who responds.
    Robert

    I had the same problem- same iPod. I had to restore the iPod.
    What actually fixed it was iTunes 7.02 update.
    Have you had a 1418 error? There's a technote for that problem now.

  • Weird sound issue. Windows sound splitting into two volume sliders and headphones stop working

    So I am a network admin thus I am not exactly computer illiterate.
    Normally my latop has one volume slider for Speakers and Headphones, however when exiting a game or unplugging/plugging in a usb device windows will suddenly split volume into two seperate sliders for speakers and headphones, it isnt doing it right this second, but it looks like it thinks my headphones are a headset when this happens.
    After this happens my headphones stop working completely and only speakers work. To get sound back to normal I have to reset the computer, after I reboot everything is fine and it goes back to one  volume slider. I am using a normal set of headphones no mic, no bluetooth.
    Anyone have any ideas?
    Thanks.

    bump...

  • Iphone3g volume buttons & off button stopped working

    Help!  My granddaughter did something to my iphone3g.....now my power button & side volume keys have stopped working, so I can't restart my phone or change the volume; whenever I try to reboot by holding down the the off button & the Home Key all I get is a voice control screen...

    Hi,
    The volume and mute functionality should be provided by the audio driver, so try the following.
    Download the IDT Audio installer on the link below and save it to your Downloads folder.
    http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55026.exe
    When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
    When complete, restart the notebook and let Windows fully load.  Open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation.  When this has completed,restart the notebook once again.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Volume and ringer recently stopped working..why?

    Voulme and ringer recently stopped working on my iPhone4...why?

    Mine acts a bit different. When a call comes in it makes a little very short ring and the volume goes to zero. The button won't turn it up but I can go into settings and turn it back up. When the next call comes it does the same thing. This started last week and up til then everything worked fine.

  • IPod stopped working long after exposed to water

    My ipod was half submerged in water, so I dried it off and pressed the home button (I figured if it was turned off pressing the home button wouldnt turn it on and wouldn't fry it) and it worked fine. Until I plugged in the headphones and then the screen stopped working but the iPod itself did. Then the next day it worked completely fine, but today it doesn't work at all. What can I do to fix it?

    Take it to the Apple Store where you can exchange it for a similar but refurbished phone of the same model and year. Look in the following for costs:
    If your iPod Touch, iPhone, or iPad is Broken
    Apple does not fix iDevices. Instead, they exchange yours for a refurbished or new replacement depending upon the age of your device and refurbished inventories. On rare occasions when there are no longer refurbished units for your older model, they may replace it with the next newer model.
    ATTN: Beginning July 2013 Apple Stores are now equipped to do screen repairs/replacements in-house on iPhone 5 and 5C. In some cases while you wait. According to Apple this is the beginning of equipping Apple Stores with the resources needed to do most repairs for iPhones, iPads, and iPod Touches that would not require major replacements. Later in the year the services may be extended as Apple Stores become equipped and staffed with the proper repair expertise. So, if you need a screen repaired or a broken screen replaced or have your stuck Home button fixed, call your local Apple Store to see if they are now doing these in-house.
    You may take your device to an Apple retailer for help or you may call Customer Service and arrange to send your device to Apple:
    Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
    To contact product and tech support: Contacting Apple for support and service - this includes international calling numbers.
    You will find respective repair costs in the appropriate link:
    iPod Service Support and Costs
    iPhone Service Support and Costs
    iPad Service Support and Costs
    There are third-party firms that do repairs on iDevices, and there are places where you can order parts to DIY if you feel up to the task:
    1. iResq or Google for others.
    2. Buy and replace screen yourself: iFixit

  • 2nd Gen Ipod Stopped Working For No Reason :/!

    Basically, i've had my ipod for about 2-3 years and today it suddenly stopped working. By this i mean, its off and i can't turn it back on!
    I can see a small light on the top right corner of the screen but that is all.
    Also you know where u put the charger in? at the bottom of the ipod? that smells a tiny bit of burnt!
    I dont know whats happened, i haven't dropped it or slipped water all over it! Please Help! i got this given as a gift so i dont know if there is any warranty!

    Try here:
    iPod touch: Hardware troubleshooting
    If not successful, yu probably have a hardare problem.  Maybe a dead battery.  I would make an appointment at the Gnius Bar of an Apple store.  It is free except for your time.

  • 4th gen ipod stopped working

    I have a 4th gen ipod that stopped working. I had it playing in the car on a charger, after making a stop it wouldn't work again. It did flicker for a few minutes, but no sound. It won't charge and the computer won't recognize it and it won't reset. So how do I determine if it is the battery or the logic board?

    Need some additional info to help.
    When you connect it to your Mac, does it show the iPod icon on the desktop?
    What does it show on the iPod screen when you connect to the Mac?
    if it shows the "Don't disconnected" screen, then it is your battery is dead. leave it charging for about 4 hours and Reset the iPod, to see if iTunes sense it, while still connected.
    If you Ipod works after charging 4 hours, then your car docking system charger is kaput!
    or else time to replace the iPod battery.
    Good luck!

Maybe you are looking for

  • Tab page shortcut

    HI , I have problem creating shortcut for tabe page. In aplication there are six tab pages, and I need to have keyboard shortcut to every tab page.How to create that? At example, if user press ALT+R I want certain tab page to be toppage , or better w

  • Itunes unresponsive (spinning ball)

    I have a Top-Of-Range 15" MacBook Pro (2011) running itunes 10.6.1 (7). The Library is 12000 tunes (on the Hard Drive) and, 1200 TV Programmes, 348 Feature Films on a remote Hard Drive by USB. Software is totally up-to-date. I hard wire sync my ipad

  • How to set OracleDataSource to a different owner.

    I have a Java(JSP) page which reads off an oracle DB table using a OracleDataSource object. Code sample OracleDataSource ods; ods = new OracleDataSource(); ods.setUser("Username"); ods.setPassword("Password"); ods.setURL"............."); Connection c

  • To check the user exit

    Hi, I want to debug the user exit EXIT_SAPLIPW1_001.Can anyone tell me how to do this?

  • Please install Visual Studio 2005 before install Acrobat 9 Plugin Wizard

    Hi, I have Visual C++ 2005 Express Edition installed on my computer. I keep get error message said "Please install Visual Studio 2005 before install Acrobat 9 Plugin Wizard" when I installed Visual Studio App Wizard  Acro9PIWizInstaller.msi. Any idea