Volume is not working properly

Volume is not working. When listen to music. Can't even see on the screen the button to control the volume

Have you tried http://support.apple.com/kb/HT4085
Sometimes it happens. If not try a reset. Hold down POWER + HOME for 10 sec until the logo appears.

Similar Messages

My speaker is not working properly in 4s if i use headphone its working now my volume increase decrease button is also not working properly how can i solve it pl help me my warranty finished

my speaker is not working properly in 4s if i use headphone its working now my volume increase decrease button is also not working properly how can i solve it pl help me my warranty finished

Hello. I sent my WRT1900AC V1 to Linksys four days ago (Monday) via UPS with a RMA. Linksys paid the shipping and everything. The router is still in route, and it should arrive to their offices tomorrow. Once they receive the WRT1900 AC V1, they are going to send me an EA8500 as a replacement. But I have been reading the comments about the EA8500 here in the forum and it seems to have the same problems. I guess the firmware is extremely flawed in both routers (maybe it is almost the same code?). Anyway, I will try the EA8500 and I hope it works. I bought a temporary router from Walmart and I paid $35 for it. It is a Belink N600 DB. I can't believe that a $35 router is working a lot, lot, lot better than my previous $250 WRT1900AC router. Unbelievable. If the EA8500 doesn't work, I'm going to try and get my money back from Linksys, or contact The Consumerist or someone to get my money back and get a Nighthawk instead.

Auto-Brightness on iPad mini Retina is not working properly.

Hello! Noticed that the Auto-Brightness on iPad mini Retina is not working properly.
It works correctly only when such a dark place, then unlock the iPad brightness will be at a minimum. Likewise, if unlock iPad in a room with light, the brightness will adjust to the surrounding space.
If I turn light into a dark room, the brightness slider does not move, and stands on the site. Checked on the iPhone 5S, there problems are not present. Auto Brightness is working correctly.
P.S. Sorry for my bad english!

Godly19 wrote:
iPad audio output does not work, except for on Siri. The mute button is not on, and the volume buttons have no effect/ don't work (unless Siri is open). I have reset the iPad, tried iOS7 and iOS8 resets, which didn't help.
iOS 8 isn't even out yet. If you are running iOS 8, I assume you are a developer and if you are, you are in the wrong forum to try to get help. If you are not a developer and you're running iOS 8, maybe that's why you are having problems on the iPad.
The audio output mostly works when headphones are out in, but has a tendency to cut out from time to time. Without headphones, Audio might start working again briefly from time to time, but most the time it doesn't. Any ideas on what is wrong with it and how to fix it?
The type that I made bold doesn't make sense. Is this a typo and you mean that " headphones are not in"?
I did take it to an Apple Store, but the inncorrectly insisted that my speaker was bust and it would cost £250 to replace the whole iPad!
And you know they are incorrect because you get sound here and there from time to time? That fact doesn't prove that something isn't working correctly inside. You could very well have a bad connection inside the device causing this, but somehow you seem to know that's not the case.

Touch is not working properly

I have hp omni 10 .one day I change option of re calibrated now touch is not working properly how I can fix this

It seems that one of the Windows Updates is causing some conflict with the touchscreen driver/firmware. Try the following steps as a temporary work around until HP can come up with a permanent fix.
1. As you power on the Omni 10, press the hardware Volume Down button to get into the BIOS menu
2. Select BIOS Setup (if the touchscreen is not responding, you'll need to plug in a USB mouse via a micro USB male to USB female adapter)
3. Select Exit on the LEFT side of the screen
4. Select Load Setup Defaults on the RIGHT side of the screen & select Yes
5. Select Exit Saving Changes on the RIGHT side of the screen & select Yes
After the restart, the touchscreen should work again.

I've an iphone 4, its headset jack is not working properly, when i insert the earphone no sound is coming, but when i keep the earphone little out i can hear the sound but very low sound is coming out, I've never dropped my iphone please help...

I've an iphone 4, its headset jack is not working properly, when i insert the earphone no sound is coming, but when i keep the earphone little out i can hear the sound but very low sound is coming out, I've never dropped my iphone please help...

bunjamin wrote:
There is now a new line in BBM that wasn't there before which covers the message that I am typing, so I can't actually see what I am typing.
Hi bunjamin,
just go to BlackBerry World, and update all your apps including BBM.
bunjamin wrote:
Every time I unlock my phone, my screen enlarges so I can't really see much on the hub/notification screen and it defaults to the hub which it didn't do before).
you can turn off the magnifying glass :
device settings >> accessibility >> magnify mode >> OFF
you can deactivate the "reset to Hub view" :
hub >> overflow (bottom right button) >> Settings >> Display and actions >> Return to Default View When Idle >> OFF
bunjamin wrote:
my ringtone is much softer than it was previously
yes, BlackBerry has acknowledged this bug in this article from the public knowledge base:
KB36755 After upgrading BlackBerry 10 OS to version 10.3.1 the volume for notifications is noticed to be significantly lower than in the previous version
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Smart Actions not working properly after software update

My Razr updated 2 days ago and since then my Smart Actions are not working properly.
I have my Work action set to turn the volume down when I'm at a certain GPS. It shows that "Work" is active, but doesn't turn the volume down.
Also, there are times (since I've owned the phone) that it will not connect to the network after coming off a Wifi Connection without rebooting the phone. I took it into a Verizon store and they did a hard reset, and that fixed it for a time, but it started doing it again.
Any help appreciated.

Hi mcclainkb, Let's make sure your phone works as you expect it to! Have you tried removing the Smart Action and setting it back up again? Are your other GPS services working as normal? After the hard reset performed in the store did you install all of the same application that you had before?
Thank you,
YaleK_VZW
Follow us on Twitter @VZWsupport

Volume button not working

Hi,
i have recently purchased a nokia lumia 620 and since yesterday suddenly the volume button to increase the volume is not working
what can be done here ?
please let me know in case of any clarifications.
thanking you,
regards
Arpita

Is it the same if you try without the Back cover ? If it works fine without it then put the cover back properly and check again..
Else, you may try a soft reset : Press Power + Volume(down) keys until the phone vibrates (about 8-10 seconds).

Shuffle not working properly

My Itunes library is not working properly. The main problem is the shuffle function. Clicking the shuffle icon to turn it blue and shuffle the play order of the songs does not work. If I sort by name, some of the songs are shuffled where as others will play one after the other (all the tracks in an album).
Also, the start and stop times no longer work, nor does the volume adjustment.
Uninstalling and reinstalling does not fix the problem.
Any ideas?

Possible Cause:
It sounds like the affected songs are encoded in a format that the iPod shuffle cannot read. Here is a knowledge base article that list the compatible formats:
http://docs.info.apple.com/article.html?artnum=300464
Troubleshoot:
To check the format of a song, right click it, and select Get Info. A window will come up giving details like, Kind, Size, Bit Rate.
It seems there are multiple songs with this problem so it may be quicker to add a new column to your Song list that will show 'Kind' Follow:
http://docs.info.apple.com/article.html?artnum=165165
For instructions on how to do this.
Solution:
If this is the case, then I would suggest saving a copy of the song to a compatible format. Instructions for doing this can be found at:
http://docs.info.apple.com/article.html?artnum=165172
Note: You are saving a COPY of the song. It does not convert the song, but duplicates the song and the converts the duplicate. So if you do not wish to keep the original (incompatible formated) song then I would suggest deleting it, so you don't get the two songs confused.

HT201210 AUDIO NOT WORKING PROPERLY AFTER INSTALLED IOS7

After installed ios 7
photos not able to see fully
audio not working properly.... [no treble, no depth in sound, very low soung even the volume is full]
get strucks while playing games

This board is full of people that are update crazy...
even when they have perfectly good working systems.
i know i thought well it's just a security update not a major update.
Best advice... whenever updating the OS, unplug all
firewire devices.
will take note of that from now on.
Was this auto-update? Try downloading the file and
running the update again with all firewire devices
unplugged.
While the 828 is disconnected perform the factory
reset
again.
Disconnect the firewire cable from the 828mkII
-Press the Setup knob
-Turn the Setup knob all the way to the right
-Press the Select knob
-Press the Value knob
-Power off the interface and plug the firewire cable
back
in
-Power the interface back on
i have the original 828 not mark 2, so no reset i know of, just power on off.
After the Mac updates... reboot and plugin the 828,
see if that doesn't get you going.
pancenter-
cheers pancenter, i'll give it a whirl updating without the interface plugged in. thanks for all your help.

Lumia 720z vol down key izz not working properly

Frm last few ,my fone vol down key izz not working properly,i tried my best but getting no good result

Since purchase i have been visiting Nokia Care 3 times for the same Volume key issue.
No satisfactory solution keeps on occuring now again same issue.Care personel says use it this time n will see got irritate with such replies Nokia Plz respond Act on this issue.
jimmyireland wrote:
Have you tried rebooting the device or trying a hard reset?
The hard reset will wipe all your data.
To do this-Go to - Settings-About-Reset your phone.
If this fails return device to point of purchase or a nokia care center.

Lumia 920 alarm clock not working properly

The alarm clock on my Lumia 920 does not work properly. It randomly fails to sound the alarm. When the alarm should sound it just disables itself without making any indication that something has happened. Usually this happens when re-enabling existing alarms. This week I tested to always create a new alarm and it has already failed multiple times. Rebooting the phone seems to solve the problem temporarily but it always comes back.
I have not hard reseted my phone as I was hoping that the Amber update would contain a fix, but unfortunately the problem still exists with the update installed . I don't turn my phone off for the night and the problem is not with the volume being muted etc.
I bought my phone in December 2012 from the operator TeliaSonera (Finland).
This bug is really annoying as I have to carry a secondary device just for the alarm.

Ive found this problem with the 920/925 myself i usually stick it in flight mode at night now and leave it upside down so as to get full effect from the speaker,on the 925 that is.
I Hard reset it and its been fine since.
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

TS1702 The appstore in my iPad is not working properly. It's not downloading either updates or new purchases of apps, stucks at "waiting" status an do not load them.

The appstore in my iPad is not working properly. It's not downloading either updates or new purchases of apps, stucks at "waiting" status an do not load them. I had to go through iTunes in my computer and sync.

bunjamin wrote:
There is now a new line in BBM that wasn't there before which covers the message that I am typing, so I can't actually see what I am typing.
Hi bunjamin,
just go to BlackBerry World, and update all your apps including BBM.
bunjamin wrote:
Every time I unlock my phone, my screen enlarges so I can't really see much on the hub/notification screen and it defaults to the hub which it didn't do before).
you can turn off the magnifying glass :
device settings >> accessibility >> magnify mode >> OFF
you can deactivate the "reset to Hub view" :
hub >> overflow (bottom right button) >> Settings >> Display and actions >> Return to Default View When Idle >> OFF
bunjamin wrote:
my ringtone is much softer than it was previously
yes, BlackBerry has acknowledged this bug in this article from the public knowledge base:
KB36755 After upgrading BlackBerry 10 OS to version 10.3.1 the volume for notifications is noticed to be significantly lower than in the previous version
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Left and right arrow keys are not working properly now

I searched the forum and didn't see this posted. My left and right arrow keys are not working properly now.
For example, when typing, left arrow does not produce the desired action (move cursor one spot to the left), and right arrow does not produce the desired action (move cursor one spot to the right). Also, control + left no longer activates spaces, and control + right no longer activates spaces.
Interestingly, in investigating the problem, I noticed that my shortcut keys for activating spaces and for activating expose had been changed (software update?). Before, I had set F5 (without pressing fn) for expose and had set F6 (without pressing fn) for spaces. Now, I noticed spaces was set back to the default of F8 (requiring fn).
The issue persists after shut down, and even when logged on to other users, e.g. Guest.
All other keys seem to be working fine, including the up and down arrows.
I don't think it's a cleaning issue because fn + left + right produces the "[" character on the screen.
Any ideas?

I'm having the same type of issue on my MacBook except not with arrow keys. The volume keys do different things when I click on them. For example, the mute key brings up the dashboard and the volume up key makes all the open screens smaller (don't know what this feature is called). I did a software update then restarted the computer when this starting happening. Any help would be greatly appreciated, thanks.

After downloaded iOS7 my iPhone not works properly

After downloaded iOS7 my iPhone not works properly. Keyboard clicks- no sound, Skype not at all, viber ring sound, volume I can not move although the bottoms work properly etc etc etc etc. because all these problems I don't want to download iOS in my iPad. When we can fix it, and how. I need a really answer for apple. I just need to do one thing to see if it work restore to a fabric and copy again everything, but I've heard from people who has made it and nothing.
Thanks

no reply from anyone

Nokia Lumia 720's Camera Is Not Working Properly

I have a nokia lumia 720 phone.
Os- WindowsPhone 8.1 cyan
My phone's camera is not working properly.
Sometime the camera closes automatically.
And some pink lines appear in the screen.
Sometime camera don't open when press the camera key or click camera app.(it just opens and closes)

Hi. After updating the device to Lumia Cyan, did you also update the system apps? If not yet, please scan the QR codes found on the below link:
http://discussions.nokia.com/t5/Pool-of-Knowledge/Nokia-Windows-Phone-8-App-Updates/td-p/1640082
Aside from the built-in camera, are you also experiencing the issue with the other lens apps? Also, please confirm. Did this issue arise after updating the device to Lumia Cyan?
If you have updated the system apps and the issue is still present, try resetting the camera settings of the device. Go to Settings > applications > photos+camera > reset camera.
If you have identified that the issue also happens with other lens apps, try pressing and holding both the volume down and the power keys for 10-15 seconds. The phone will vibrate. It will restart afterwards.
Keep us posted.

Volume is not working properly

Similar Messages

Maybe you are looking for