Volume Keeps Changing to full

When I change my ipod volume down to any level, it will gradually increase back up to full again, even when it is on lock. There are no mobile phones that could interfere with it or any other devices near by. Is this a known bug within the ipod nano?

I have exactly the opposite problem. After resetting to factory settings it starts about 50% and will not save at a higher level. To listen at a higher level we have to not "set" the volume limit after adjusting it but leave it at that point untouched. I'm glad to see it is a common issue though I wish there was a more direct way to contact Apple for them to get their butt in gear.

Similar Messages

Sound volume keeps changing

Hi,
I bought my hp dm4-3055dx 2 weeks ago and I have problems with the sound ever since the beginning. I'm using the pre-installed Windows 7 64 bit OS.
The problem with the sound is the following: The sound volume keeps changing. Sometimes it seems to me that it's oscillating. The Windows volume (in the tray) is constant though. For example, when I turn the volume of my Winamp player to 1% the volume of the sound decreases, but after some seconds it starts increasing until it hits the Windows maximum volume, then it starts oscillating a little bit. Increasing the Winamp volume doesn't change anything, cause it's already the Windows maximum. But when I turn it down again, there's again a change. But as I described before, the volume will go up slowly to the Windows maximum. I have encountered the same problem with the VLC player, so I guess it's not a software problem.
I already downloaded the sound driver and installed it but there was no change. Any idea what that could be?
Cheers

Any response here? I am having the same problem in that the sound constantly fluctuates up and down as I am trying to listen, no matter if I listen through Spotify or ITunes. It is very frustrating and I am seeing similiar posts for many models, especially considering this was marketed as a Beats Audio laptop with superior sound performance. I have the Pavillion dm4-3055dx.

ITunes sound volume keeps changing

With Mountain Lion 10.8 and 10.8.1 sound volume with in iTunes keeps changing. This did not happen with in 10.7 or earlier versions. There have been no other changes.

I really lost my patience, i intalled it again and seems ti be ok but all of a sudden the volume goes down again and wouldn't allow me to turn it higher.
this is what is happening:
https://www.youtube.com/watch?v=mM1DYhtzsag
can anyone help me?
thank you!
MacBook Pro, Mac OS X (10.6.8)

Volume keeps changing automatically while playing music in iTunes

Recently my iTunes has started to automatically change the volume up and down while my audio or video plays in iTunes. This happens when I'm playing from my library and also when I put in a DVD/CD. It does not happen on my iPod after it is synched through iTunes, though. It's quite annoying and I could use some suggestions in fixing this glitch. Any help would be appreciated. Thanks!
Matt
Dell XPS400 Windows XP

Do you have Genius turned on?

Volume keeps changing

Recently whenever I'm listening to music my iPod decides to randomly turn itself down, despite the fact I always have it locked to prevent this exact situation!
How do I stop this from happening? It's really starting to get on my nerves!

When that happens to me, my iPod has been sitting in the sun for a while. Or you can try restoring it

My volume keeps going up and down on its own

My volume keeps going from full blast to mute on its own. I've updated the software, restarted it 5 times, and have taken it out of cover. Please help

Try this.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Volume tracks keep changing

hi,
Although I don't have any automation or any continuos controller for the volume of the tracks they keep changing.
any advice?
Thanks in advance.

I had the same problem for SO long, until just now. Midi tracks would jump up in Volume at certain points, and I couldn't control.
Found the answer (for my issue, at least) here: http://www.logicprohelp.com/forum/viewtopic.php?t=71347
Now my remaining question is, how can I PREVENT Volume events from being written in? Cause looking at one midi track's events right now, I'd have to go thru the list and delete about 15 different volume events for the volume to not jump around on me...
I think I have Midi Volume assigned to a fader on my midi keyboard... not to figure out how to unlearn that assignment...

Bootable Volume Permissions Keep Changing

I've got a strange problem.
I have two bootable backup volumes on different physical disks...one is a 3.5" firewire hard drive and the seceond is a portable 2.5" firewire hard drive. The permissions of bootable volumes (the volume itself, not the items inside) are supposed to be:
system: Read and Write
admin: Read and Write
everyone: Read only
And, the checkbox for "Ignore ownership on this volume" should NOT be checked.
However, over time, the permissions of these volumes will somehow change to:
my username: Read and Write (my actual admin username)
(unknown): Read and Write
everyone: Read only
And, the checkbox for "Ignore ownership on this volume" will become checked--which totally messes up a bootable backup.
If I run Diskwarrior on the volume, the correct permissions for that volume will be restored. BUT...why is this happening?
I'm pretty obsessive about having having bootable backups and have been doing them for years and years. I don't ever remember this happening before. I'm pretty sure it wasn't happening when I was running 10.5.7. I upgraded to 10.5.8 about 3 weeks ago.
Finally, the permissions of these volumes will change even if I haven't done a backup. I'll just mount one of them and voila: the volume permissions have somehow changed since the last time.
Any help or advice would be greatly appreciated.

that is very strange because i have the opposite problem. The permissions of my actual hard drive keep changing from
my username: Read and Write (my actual admin username)
(unknown): Read and Write
everyone: Read only
to
system: Read and Write
admin: Read and Write
everyone: Read only
did you find out what was the source of your problem?

[8.1 pro update1] Windows KEEPS changing and reinstalling keyboard layouts regardsless of IgnoreRemoteKeyboardLayout

Windows 8.1 is driving me nuts beyond believe once again. I have 8.1 Pro update 1 English, installed from the VLK iso from our Volume License / SPLA account. As we are a Dutch company, the Location is set to The Netherlands, as well as the date/time format.
Therefore in my keyboard settings the language is Dutch (NL) but I set my keyboard layout to US, as below:
As you can see there are no other languages our installed. This worked for years with Windows 7 and before with XP. Windows 8.1 however KEEPS changing my keyboard layout to plain Dutch making my keyboard unusable. The language bar in the systemtray, or whatever
it's called in this OS, shows THREE layouts, which are actually 'selectable' and work as if they were installed. However, they are not 'really' installed, as per the screenshots above.
This is driving me completely mad. Why on earth is Windows making descisions for me which I should be making myself? In addition, in my oppinion Windows should NEVER change somthing as trivial as a keyboard layout by itself. People don't change switch keyboard
even when logging on to a remote system that has a different layout configured. Whoever came up with this 'automatic switching per application' idea once again had no clue of real-life usage at all.
I've added those two languages I do NOT want to my keyboard layouts and removed them. Sure they are gone then, and as only language NLD with layout US is left, the language bar in systray is gone as well. After a few days all three are back, and my keyboard
is producing wrong characters again.
I've tried with regvalue HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Keyboard Layout\IgnoreRemoteKeyboardLayout set to 1, to no avail at all. It just keeps changing. This should help to prevent my keyboard when changing when I RDP to one of my servers.
The advanced settings in Language don't help either:
'let me set a different input language for each app window' is unticked.
Override for default keyboard is now set to Dutch - US, like I want it. Doesn't help either.
I cannot reproduce it on demand, settings do NOT change when connecting to my RDP server(s). They do NOT change when I open any of my used programs, being IE, Chrome, CMD.exe, notepad and a few others. It shouldn't either as I disabled the 'keep settings
per application'.
I have changed the keyboard shortcut from alt-shift or whatever it was to 'none'.
How to prevent Windows 8.1 completely from changing the keyboard layout I use? Is there any way to check WHY or WHAT actually changes my keyboard?

This might be really late to this post but I've been having this issue while playing games, particularly those which are complex enough to require Control, Alt, Shift. At first like some people here suggested
Windows Key + Space was the cause, but even after removing all alternate layouts (for reference, I want the UK layout, but it was switching to the US Layout) it was persisting.
This post pointed me in the right direction, go into your Language Options
> Change Override (Advanced). At this stage I've noticed there is the Switching input methods section, look for
Change language bar hot keys and here I fount Alt + Shift
was being used for switching Between input languages - a key combo I'd probably hit quite often just purely by accident. You can change the key sequence to no binds.
I haven't fully tested it, but it appears to be working for now - and I hope its an extra option for people to look at if they're running into this issue.

Imac 24-Why does my airport signal keep changing??

my airport signal keeps changing??
right next to my imac i have my powerbook 17
and it's signal is full...where my IMac signal is not??
signal on my imac is 2 bars from full most of the time!!
is this a IMAC thing or what??

No real help but this is a common problem for c2d machines it seems. They have the new "n" protocol wireless card in which willl be faster and further than the g with the new apple extreme base station. It will also be very good for streaming video (iTV). This is just consolation for an iffy wireless link. These boards have many threads on this topic (eg macbook pro area). Do a search any you will find the others with the problem and maybe a solution.
Cheers

When i try to play Music or a video the volume comes up with full bars and a stop sign, how do i get back my volume?

When i try to play a music or video or anything the volume bars come up full but with a stop sign underneath, i don't know how to get back my sound.

The way that usually works best is to move the entire iTunes folder folder from the current location to X:\iTunes where X: is the letter of the external drive.
If you moved the iTunes Media folder "by hand" instead of using iTunes to relocate the media folder then:
Move the main iTunes folder to X:\iTunes
Move iTunes Media inside it as X:\iTunes\iTunes Media
Press and hold down the shift key as you click the icon to start iTunes
Keep holding until asked to choose or create a library.
(If iTunes opens normally/with an empty library close it and go back to step 3)
Click choose and open X:\iTunes\iTunes Library.itl.
If you still have a problem try my script FindTracks.
tt2

My iTunes Match still has not finished after 3 1/2 days and step 3's total number keeps changing, Why?

So I finally broke down and subscribled to iTunes Match just to see how it is and if it would be worth it to me. well right now im about to wig out because its been 4 days and i still have not gotten past step 3 on the proccesing...now to itunes match's defense, or iMatch as ive seen it called, i do have an emense itunes library of movies, tv shows, podcas, ringtones, and music (somewhere around 15,000 total) so I knew it would take a while, but 3 days?! And thats not even the problem, thats just a little grip I have cuz now I can't access my music on my iphone almost everything is greyed out.... i gould a back door to it where if i shuffle the album and skip to the song i want then that will work BUT! thats too much of a hassl!
Ok enough ******** cuz ima sit here just to see how long it takes and report back. Now for the real question.... I want to know that in all this waiting why does step 3 where it uploads artwork and remaining songs total number keep changing, i.e. :
this is the screen ive seen for the last 3 full days, and the total items uploaded keeps changing yesturday it said 1500 of 7000
so is it updating the number as it uploads them or what? It's confusing but im trying to give it a chance.

*Update*
ok so day 4-5 and im still not finished with the inital iMatch process.... BUT i found out that nothing was wrong its just taking for freakin ever. oh well at least i only got 1000 more to go....

Split Screen on 30" Display, changes in System pref keep changing

Hi,
This is my first time on this forum, so Hi to everyone out there.........!
Anyway,
I have a G4 with a 30" display, everytime I boot up the 30" display splits into 2 halfs, like a mirror of each other and the resolution is 1200 x 800. The only way to fix it is to reboot the PC and then I get the one size screen at full resolution.
I've gone into System Preferences and Displays and locked the configuration change heaps of times but it doesn't seem to stay locked as for some reason the config keeps changing.....
Please note, my laptop stays blank but I can drag screens from my display and make them display into my laptop which allows me to open heaps of sessions up between the two....
Does anyone have the same issues, or this this a first......?
All comments welcomed.
Thanks
Paul

Sorry, I have placed this in the incorrect forum....... I will close it from here and re-post it in the correct forum.
Ta
Paul

Date and time on my iPhone keeps changing to GMT or Cupertino time

Hi,
Somehow my date and time settings keeps changing to GMT/Cupertino despite setting it to Mumbai (India). Because of this all my alarms and calendar events have gone for a toss. I have changed the time to Mumbai multiple times, but it keeps switching back without event touching the phone. I even upgraded to 2.0.2 but the problem persists. Any idea what else can I do to get this working.
Thanks,
Avinash

I picked this up from another thread (I tried 2.0.1 and 2.02 upgrades too with no success). The following worked, though:
- Plug your iPhone into you Macbook / PC and allow iTunes to do a full backup (I had to right click the iphone icon and select backup).
- Right click your iPhone under DEVICES in iTunes and click on Restore. Choose the back up you have just made
- From within your iPhone, tap the Settings icon, choose General and then Date & Time. Choose Time Zone and change the time zone to your desired city.
- To test the change has worked, tap the Date & Time back arrow at the top left and then click on the home button. Finally, go back to the Time Zone option within Settings and the time zone should have stayed as the one you chose.
Note: Is your iPhone 3G’s GPS facility taking ages to pinpoint your location? The above changes will fix this problem as well

Multicast IP address keep changing on music on hold

Hi
I am trying to set up multicast for music on hold on the cucm 9.
on the cucm, I enable multicast audio sources on MOH server, using base IP 239.1.1.1, and set increment multicast on " ip address"
however the multicast IP address keep changing, sometimes its 239.1.1.1, then after a while it suddenly change to 239.1.1.2 etc..
here is the config on our srst router ( which specify the multicast ip is 239.1.1.1):
is there any way that the multicast ip do not keep changing as its affecting the MOH at the moment.
" config for MOH"
telephony-service
video
srst mode auto-provision none
srst dn template 1
srst dn line-mode dual
max-ephones 265
max-dn 600
ip source-address 10.190.0.1 port 2000
timeouts interdigit 5
system message "GlobalDial Unavailable"
cnf-file location flash:
time-zone 48
date-format dd-mm-yy
voicemail 080758831#
max-conferences 8 gain -6
moh "xmas_jazz.wav"
multicast moh 239.1.1.1 port 16384 route 192.168.1.1
transfer-system full-consult
transfer-pattern 0.T
secondary-dialtone 0
create cnf-files version-stamp 7960 Nov 27 2013 18:23:59
I was thinking to put a few more multicast IP,. but it only allow you to put one ( while the cucm set the IP address as increment)
OC-MHO-VG-SRST(config)#telephony-service
OC-MHO-VG-SRST(config-telephony)#multi
OC-MHO-VG-SRST(config-telephony)#multicast ?
moh Set IP multicast address for use with music-on-hold from flash
OC-MHO-VG-SRST(config-telephony)#multicast moh ?
A.B.C.D Define music-on-hold IP multicast address from flash
OC-MHO-VG-SRST(config-telephony)#multicast moh 239.1.1.2 ?
port Define media port for multicast moh
OC-MHO-VG-SRST(config-telephony)#multicast moh 239.1.1.2

Hi Rachel,
If the Increment Multicast on radio button is set to IP address, each MOH audio source and codec combination is multicast to different IP addresses but uses the same port number. If it is set to Port Number, each MOH audio source and codec combination is multicast to the same IP address but uses different destination port numbers.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cusrst/admin/sccp_sip_srst/configuration/guide/SCCP_and_SIP_SRST_Admin_Guide/srst_appendix_b_.html#50022
HTH
Manish

Volume Keeps Changing to full

Similar Messages

Maybe you are looking for