Volume Keys not responding after installing service pack 1.

Okay, I've scoured the internet, and I can't find anyone else with a similar problem or a way to fix it, hopefully ya'll will have an answer:
I recently just updated my Vista Ultimate Operating System (using Bootcamp) to service pack 1. Prior to installing service pack 1, when I pressed F3-F5 on the keyboard, they would respond in the same manner that they would on OS X where F3 would mute, F4 would make the sound lower, and F5 would increase the sound.
However, after Service Pack 1, the buttons do nothing more than mute and turn on the sound. I reinstalled the Boot Camp drivers, ran all the software updates (found no updates on both apple and windows), and tried to repair Vista from the original install disk. Nothing helped.
However, here's the thing: When I press the buttons the same little overlay comes up displaying the sound volume, but there's a big 'denied' circle on the bottom of it. To describe it slightly better, there's a circle with the line through it(looks like a no smoking sign), placed over the squares representing the volume on the overlay to show volume control.
I'm lost as to what to do since all the other keys work, including the brightness control, and they worked before I installed Service Pack 1. Has anyone else had this problem or know how to fix it?

i just uninstalled SP1 and it went back to normal,
go to Control Panel and on the left side theres something called "view installed updates" go there and just uninstall SP1 and your fine. but if you need sp1, i don't know how to help you there.

Similar Messages

Volume Key not work after installing Sametine Notes 9

Just after installing sametine Note version 9 the voliume key stopped working. I have a volume logo showing an interdiction under the logo. I tried to dopwnload an Apple fix for LED cinema display but the nessage said my computer does not need it. Any solution

This thread should help:
https://discussions.apple.com/message/19407500#19407500?ac_cid=tw123456#19407500

Firefox Not Responding after Installing Microsoft Office 10

After installing Microsoft Office 10 (student and home edition) on my laptop, I noticed that Firefox is going into the state 'Not Responding' every time I access it - it takes about 10 secs to 'think' and then comes back online. It continues to do this every time I want to access a new page, new link, click on mail in Yahoo Mail, etc. Has anyone experienced this issue?

1) Check the $IAS_ORACLE_HOME/Apache/JServ/etc/logs/jvm
has servral logs for OACoreGroup Servlets that are initialied
2) You might have to enable the debug option in jserv.properties and jserv.conf
(find IsItWorking.java in Metalink for the appropriate note )
3) If this is 403 forbidden then check trusted.conf alongside httpd.conf
pls keep posted about how this issue got resolved.
Sunil
JSP not responding after installing 11.5.10.2 on IBM
HACMP
i have finished installing Oracle applications
11.5.10.2 on IBM clusters (HACMP version 5.1)its a
multinode setup with mutual failover. other
applications are working fine. the installation went
well. but the final part on the middle tier , during
the post install checks it says JSP not responding. I
checked the apache error-log and saw the follwoing
entry
[Sun Apr 23 21:04:21 2006] [error] [client
172.29.200.74] client denied by server configuration:
/appl/oracle/devcomn/portal/
DEV_erpappssrv/oprocmgr-service
>
that bafles me because that ip address was not used
in the installation. its the persistent ip address of
the HACMP. the service ip that was used in the
configuration file was 172.29.200.75
however there is no mention of this in the error
log.i also edited the oprocmgr.conf in the
Apache/conf directory after which i dont get the
error however the servlets pages then hangs and
returns page cannot be displayed error on internet
explorer. no error is registered on the error log.
the jdk am using is 1.4.2 which is the recommended
one.
what this means is that i cannot access the self
service pages and as you know you need self service
pages to access the application in 11.5.10.2
i opened a TAR with oracle on 8th April 2006 and till
today i have not been able to get a solution.
I am hoping that i will get someone in this forum who
has met a similar problem or who has an insight into
how we can solve this problem already am weeks past
the target go live!!!
Please Kindly help
Jeremiah Ochieng

Fix for continuous reboot after installing Service Pack 3 in Windows XP

After contacting HP Technical Support and speaking to a supervisor we were able to solve the problem of Windows continuously rebooting after installing SP3. Here are the steps that fixed the problem with my HP Pavilion running on an AMD processor. The steps are actually fairly straight forward and easy....
Issue: The computer reboots continuously after installing Windows XP service pack 3
Computer reboots continuously after installing Windows XP service pack 3 on AMD systems. The problem is that with some configurations, SP3 causes the computer to crash during boot, and Windows XP, by default, is set up to automatically reboot when it crashes. That is why you end up in the endless rebooting scenario.
Cause:
On HP computers, the same Windows installation disc image for Intel processor based PC's is deployed for the AMD processor based computers as well. Because the original installation image for both Intel and AMD is the same, all have the intelppm.sys driver installed and running. That driver provides power management on Intel-based computers. On an AMD-based computer, amdk8.sys provides the same functionality for power management.
Symptoms:
Ordinarily, having intelppm.sys running on an AMD-based computer appears to cause no problems. However, on the first reboot after a Service Pack 3 installation, it causes a big problem. The computer either fails to boot, or crashes with a STOP error code of 0x0000007e.
You may not see the error code because the computer reboots too fast. In order to get the error message, you need to set an option during startup. To do so, open the windows advanced menu by tapping the f8 key on startup. Then select the "Disable automatic restart on system failure" option.
Solution:
If you have an AMD-based computer, however, you do not need the intelppm.sys driver and can disable it. There are three methods in order to do this.
Step 1: Please try to log on the system in safe mode.
1. While using Safe mode open the command prompt.... Start, All Programs, Accessories, Command Prompt
Run the following command in the command prompt just like it's typed: sc config intelppm start= disabled
Step 2:
If the issue persists, please try to log on or boot the system in recovery console (refer to the web document)
2. Using recovery console:
If you booted into the recovery console, from a command prompt, type: disable intelppm
Step 3: Please check in registry.
3. Using windows registry:
1. Run regedit
2. Click on HKEY_LOCAL_MACHINE
3. From the File menu, select "Load hive"
4. Navigate to %systemdriver%\Windows\System32\Config on the dead system and select the file name System
5. Name it something you can remember, such as "horked"
6. Navigate to horked\ControlSet001\Services\IntelPPM
7. Double click the Start value and set it to 4
8. If you did what I did and completely messed things up by running a disk check previously, navigate to ControlSet001\Control\SessionManager. Open the BootExecute value and clear out the autochk entries.
9. Repeat steps 6-8 for the other control sets.
10. Reboot
Reference:
http://support.microsoft.com/kb/888372
Additional information:
Computer Restarts after Displaying Stop Error 0x0000007E (After Updating with Service Pack 3 for Windows XP):
http://h10025.www1.hp.com/ewfrf/wc/genericDocument?docname=c01457284&cc=us&dlc=en&lc=en&jumpid=reg_R1002_USEN
For future reference: Service pack 3 Installation steps:
Before installing the service pack 3 update, please follow the steps listed above and save yourself much time and effort.
To uninstall service pack 3, I suggest that you uninstall it from add/remove programs.
Step 1:
Uninstall service pack 3 from add/remove programs:
1. Click Start.
2. Select Run.
3. Type appwiz.cpl in the run field.
4. Click OK.
5. Click change or remove programs.
6. Select the program -service pack 3 that you want to uninstall or remove.
7. Click Remove button.
8. It will pop up the message stating that "Are you sure you want to remove the programs".
9. Click Yes. It will help you to remove or uninstall the installed programs from add and remove programs.
Step 2: If the issue persists, I suggest you to perform system restore and then try to install the service pack 3 after performing the steps mentioned above in regards to removing the intelppm.sys Driver.
Using Microsoft System Restore in Windows Me and XP:
http://h10025.www1.hp.com/ewfrf/wc/genericDocument?docname=bph07103&cc=us&dlc=en&lc=en&jumpid=reg_R1002_USEN
Step 3:
How to obtain the latest Windows XP service pack :
http://support.microsoft.com/kb/322389/
Steps to take before you install Windows XP Service Pack 3:
http://support.microsoft.com/kb/950717/en-us
I hope this helps someone who is having this problem. It sure took me a minute to get it all figured out. :0)

Still useful as of 12/30/11. Have ten Lenovo 5042 computers with downgrade licenses to run XP and have a ghosted image from another Lenovo 5042 having and Intel cpu. My target computers all have AMD cpus in them and the image would continuously reboot on
the AMD computers.
Used method 1 and it cleared the problem instantly, many thanks for the post and the time and effort it took to dig up the answer..

How can I open a picture file in PS Elements after installing service pack 2?

Since I installed service pack 2 on my HP computer a week or two ago, the Photoshop "Open" tab no longer appears at the top of my Pictures screen, but rather a "Preview" tab, and I haven't been able to open a picture in Photoshop. Instead, when I double click on a picture, it opens in Windows Picture Gallery. Not long after I installed service pack 2, I also changed my default browser from Internet Explorer to Mozilla Firefox, so I don't know if that has anything to do with it. Thanks...

Reinstall PSE or manualyl adjust your file associations.
Mylenium

Error after install Service Pack 4

Put weblogic510sp4boot.jar as the first package in your JAVA_CLASSPATH
and
Put weblogic510sp4.jar as the first package in your WEBLOGIC_CLASSPATH
Cheers - Wei
Min Zheng <[email protected]> wrote in message
news:[email protected]...
Hello,
I have following errors when I start WL:
java.lang.NoSuchMethodError: weblogic.boot.ServerClassLoader: method
getClassLoadNotify()Lweblogic/boot/ClassLoadNotify; not found
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:140)
>
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:112)
>
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:104)
>
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.<init>(Recurs
iveReloadOnModifyClassLoader.java:53)
>
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$SingleSlave.<
init>(RecursiveReloadOnModifyClassLoader.java:149)
>
at
weblogic.servlet.internal.ServletContextImpl.setClassLoader(ServletContextIm
pl.java:1392)
>
at
weblogic.servlet.internal.ServletContextImpl.<init>(ServletContextImpl.java:
516)
>
at weblogic.t3.srvr.HttpServer.initServletContexts(HttpServer.java,
Compiled Code)
at weblogic.t3.srvr.HttpServer.start(HttpServer.java:388)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:825)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
java.lang.NoSuchMethodError: weblogic.boot.ServerClassLoader: method
getClassLoadNotify()Lweblogic/boot/ClassLoadNotify; not found
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:140)
>
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:112)
>
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:104)
>
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.<init>(Recurs
iveReloadOnModifyClassLoader.java:53)
>
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$SingleSlave.<
init>(RecursiveReloadOnModifyClassLoader.java:149)
>
at
weblogic.servlet.internal.ServletContextImpl.setClassLoader(ServletContextIm
pl.java:1392)
>
at
weblogic.servlet.internal.ServletContextImpl.<init>(ServletContextImpl.java:
516)
>
at weblogic.t3.srvr.HttpServer.initServletContexts(HttpServer.java,
Compiled Code)
at weblogic.t3.srvr.HttpServer.start(HttpServer.java:388)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:825)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
This erros happend only after I installed Service Pack 4, and change the
weblogic.class.path.
Thanks,

Labview won't close down properly after installing Service Pack 2

Hi,
We installed Service Pack 2 for Windows XP recently and ever since, I've had trouble closing down Labview. I'm using Labview 6.1 and whenever I try to close it down, it won't fully close down and I have to use Task Manager to shut it down.
What happens is that I get a minimised window on the bottom of the screen that won't go away.
Has anybody seen this before and can anybody help.
Thanks,
Kenneth

tbob wrote:
In my experience, SP2 for XP introduced a whole lot of bugs and mishaps. You would be better off uninstalling SP2 if you can. If you want to keep SP2, you may have to uninstall Labview, then re-install it.
I personally can't confirm this statement. I have XP SP2 with the latest patches applied and I have not really problems with LabVIEW 6.0, 6.1, 7.0, and 7.1. Only NI-Max likes to crash sometimes but since it is a notebook I have little reason to run NI-Max until now.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Oracle and Instance Service Not Starting After Win2K Service Pack 4 Install

Please help
We are running Oracle 8.1.6 on Windows 2000 Server and everything ran fine. Our Network Admin installed Windows service pack 4 and now after a reboot we have to manually go in and start Oracle because it does not start automaticially.
I've looked everywhere and cannot find any documented resolution to this problem.
Regards,
Andy

If you completely patched your server then it might be related to the problems some of us are experiencing with a certain MS patch. Check this thread for more details:
ORACLE NOT AVAILABLE..ORA 01034

Why do my FaceTime and webcam not respond after installed mac os 10.7.2??please help me to solve it!!thank you!

I spent my SG$39.90 to purchsed a new version of mac lion 10.7.2. But sadly, after installed i could not open my webcam or facetime.It is very frustrating and making me very upset due to this situation.If i know like this i would never purchased the new Mac lion version!please help me to solve this problem!thanks!

You can try the following:
Install or Reinstall Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
      left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
        the Security button and set the Zero Data option to one-pass. Click on
      the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

JSP is not responding after Installing oracle Apps 11i

Hi,
I installed Oracle Applications successfully on my PC with Windows XP OS.
I used expess installation for the VIS database.
After installation all Post Install checks passed except for "JSP is not responding"
checking URL = http://kanaan.mydomain:8003/OA_HTML/jsp/fnd/fndhelp.jsp?dbc=E:\oracle\visappl\fnd\11.5.0\secure\VIS_kanaan\vis.dbc
JSP is not responding, waiting 15 seconds and retesting.
Anyhow if I log to http://kanaan.mydomain:8003 I am being directed to a page showing :
"Oracle Applications Rapid Install Portal"
Kindly advise how to check what is wrong with JSP and how to fix.
Thanks in advance
AK

Hi,
All services are starting properly with no errors
when opening the page "http://kanaan.mydomain:8003/oa_servlets/AppsLogin"
, i recieve the error :
The webpage cannot be found
HTTP 404
Most likely causes:
There might be a typing error in the address.
If you clicked on a link, it may be out of date.
What you can try:
Retype the address.
Go back to the previous page.
Go to kanaan.mydomain:8003 and look for the information you want.
More information
Apache is running in process manager.
In apache log file the last few lines are :
[Wed Feb 28 09:56:55 2007] [error] OPM: EW: Fail to start process with mod=JServ and grp=DiscoGroup, it's possible that your configuration file is not correct.
[Wed Feb 28 09:56:55 2007] [error] OPM: EW: Fail to start process with mod=JServ and grp=OACoreGroup, it's possible that your configuration file is not correct.
[Wed Feb 28 09:56:55 2007] [error] OPM: EW: Fail to start process with mod=JServ and grp=XmlSvcsGrp, it's possible that your configuration file is not correct.
[Wed Feb 28 10:27:08 2007] [error] OPM:Can not find one alive process
[Wed Feb 28 10:27:08 2007] [error] [client 192.168.254.5] File does not exist: /oa_servlets/AppsLogin
[Wed Feb 28 10:27:17 2007] [error] OPM:Can not find one alive process
[Wed Feb 28 10:27:17 2007] [error] [client 192.168.254.5] File does not exist: /servlets/weboam/oam/oamLogin/oam/oamLogin
[Wed Feb 28 10:27:27 2007] [error] OPM:Can not find one alive process
[Wed Feb 28 10:27:27 2007] [error] [client 192.168.254.5] File does not exist: /oa_servlets/AppsLogin
[Wed Feb 28 10:27:43 2007] [error] OPM:Can not find one alive process
[Wed Feb 28 10:27:43 2007] [error] [client 192.168.254.5] File does not exist: /oa_servlets/AppsLogin
[Wed Feb 28 10:27:48 2007] [error] OPM:Can not find one alive process
[Wed Feb 28 10:27:48 2007] [error] [client 192.168.254.5] File does not exist: /servlets/weboam/oam/oamLogin/oam/oamLogin
[Wed Feb 28 11:54:28 2007] [error] OPM:Can not find one alive process
[Wed Feb 28 11:54:28 2007] [error] [client 192.168.254.5] File does not exist: /oa_servlets/AppsLogin
[Wed Feb 28 12:12:21 2007] [error] OPM:Can not find one alive process
[Wed Feb 28 12:12:21 2007] [error] [client 192.168.254.5] File does not exist: /oa_servlets/AppsLogin
[Wed Feb 28 12:13:56 2007] [error] OPM:Can not find one alive process
[Wed Feb 28 12:13:56 2007] [error] [client 192.168.254.5] File does not exist: /oa_servlets/AppsLogin
[Wed Feb 28 12:13:59 2007] [error] OPM:Can not find one alive process
[Wed Feb 28 12:13:59 2007] [error] [client 192.168.254.5] File does not exist: /servlets/weboam/oam/oamLogin/oam/oamLogin
[Wed Feb 28 13:57:23 2007] [error] OPM:Can not find one alive process
[Wed Feb 28 13:57:23 2007] [error] [client 192.168.254.5] File does not exist: /oa_servlets/AppsLogin
[Wed Feb 28 15:35:40 2007] [error] OPM:Can not find one alive process
[Wed Feb 28 15:35:40 2007] [error] [client 192.168.254.5] File does not exist: /oa_servlets/AppsLogin
When running the command "ps -ef | grep -i apache":
C:\Documents and ettings\Administrator>E:\oracle\visora\iAS\Apache\Apache\bin
'E:\oracle\visora\iAS\Apache\Apache\bin' is not recognized as an internal or ext
ernal command,
operable program or batch file.
Also apache is running in the processes.
Kindly advise and thanks for your help

Program not Responding after installing PSE8

I recently upgraded to PSE8.
Since then I have noticed that when I go to shutdown my system (XP w/ SP3) I get
a window indicating a program is not responding. The title of the window is
'End Program - 9c0'. The '9c0' part is not always the same.
Last night it was 960. I've checked before the shutdown to see if there is any application
or process with a number like that and I have never found one.
I believe I keep my system free of viruses, etc. but I did do a complete virus scan
with Avast as well as Symantec. Plus spyware checks by AdAware and SpyBot.
I'm wondering if anyone else has noticed anything like this?

I have the same problem. I'm running XP SP/3, and after I installed PhotoShopElements my machine hangs at shutdown until I kill a running process. The problem goes away if I stop ElementsOrganizerSynchAgent.exe. So for now, my solution is to set the service to start manually.
Any chance of getting a fix? The program I assume performs a needed function, and I'm now without it.
Alan Stone

Volume Keys Not Responding

I purchased a new wireless keyboard just recently. I have attempted to increase/decrease volume with the function keys at the very top of the keyboard. They have not responded. After thoroughly searching the communities and repeating steps others have followed, I am still not able to use the volume keys. I need help.

you need to reset your SMC... heres the link
http://support.apple.com/kb/HT3964

SAP B1 always not responding after install in Windows 7

Dear All experts,
I have one client machine after change to Windows 7, the client SAP B1 always show not responding or seems like "freeze", cannot do any thing while user only open some marketing document. But the othes application like Ms Office or others than SAP B1 still can be respone.User have to end process the SAP B1. Sometimes it will create the dump file. Only user's machine with Windows 7 will happen this, others like Windows XP does not facing this problem.
This issue happen since user change to new machine with Windows 7. Previously, user is using Window XP and does not happen this issue. The current version is SAP B1 2007A SP01 PL 7. The work around we have done is check the FMS, addon, and reformat the machine to reinstall Windows 7, turn off UAC setting. Please advise.
Thanks & Regards
Angie

Hi,
What windows 7 edition are you using and is it one of this following :
- Professional, Enterprise & Ultimate
Edition
if yes, it is okay that you have done the work around. I suggest to consider the sql native client (sqlnc) installation. Use the correct version of sqlnc. you use 2008 version for SQL 2008 and 2005 version for SQL 2005. Also, check if you have installed .net framework 1.1 or 2.0.
What about the PC hardware and software spec. are you using B1 system requirement guidance ?
Many causes that make slow performance in B1 especially when you are using B1 2007A SP01 PL07. I said that because it is the previous PL that approved by SAP to use in win 7. So, try to upgrade to latest PL i.e. PL11. See if the problem still persists. Let's know if persists.
JimM

Storage Provider not responding after installing SCVMM 2012 R2 UR5

After installing UR5 registered storage providers show Not Responding. I had two registered, both scale out fileservers in the same domain as VMM that were working fine before UR5. Sofs running 2012R2 with latest patches
Trying to refresh provider:
Error (26101)
Storage discovery of provider {0869e333-12f6-44c7-b6b7-7139530a18c9} for user hyper-v\<user> failed from VMM01.hyper-v.blaa.com with error code 46010.
Recommended Action
Specify valid provider, port and user credentials for storage discovery.
The other one I deleted to recreate it. The deletion yielded:
Error (26312)
Unregistering the storage subsystem with unique ID {bca715fb-ce94-47f5-9558-f8e862c3e7dc}:SS failed from VMM01.hyper-v.blaa.com with error code 46005 [SM_RC_SUBSYSTEM_NOT_REGISTERED].
However the storage provider was removed and now if I run Get-SCStorageProvider i can't see it. When I try to add it back I get an error :-(
Error (26311)
Registration of the storage subsystem ss02.hyper-v.blaa.com for user hyper-v\<user> failed from VMM01.hyper-v.blaa.com with error code 4 [SM_RC_GENERIC_FAILURE].
Not sure what's happening but looking at the roleholder in the storage cluster I have an error in the VMI-Activity log:
Log Name: Microsoft-Windows-WMI-Activity/Operational
Source: Microsoft-Windows-WMI-Activity
Date: 2015-02-23 00:11:52
Event ID: 5858
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: xxx
Description:
Id = {99940B20-4D23-0003-FC56-D599234DD001}; ClientMachine = SS02-1; User = HYPER-V\xxx; ClientProcessId = 332; Component = Unknown; Operation = Start IWbemServices::GetObject - root\Microsoft\Windows\Storage\Providers_v2 : SPACES_StorageProvider.ObjectId="{0869e333-12f6-44c7-b6b7-7139530a18c9}";
ResultCode = 0x80041001; PossibleCause = Unknown
And a Security error:
Log Name: Security
Source: Microsoft-Windows-Security-Auditing
Date: 2015-02-23 00:11:52
Event ID: 4656
Task Category: Other Object Access Events
Level: Information
Keywords: Audit Failure
User: N/A
Computer: ss02-1.
Description:
A handle to an object was requested.
Subject:
Security ID:
HYPER-V\xxx
Account Name:
xxx
Account Domain:
HYPER-V
Logon ID:
0x117FC549
Object:
Object Server:
WS-Management Listener
Object Type:
Unknown
Object Name:
Unknown
Handle ID:
0x0
Resource Attributes:
Process Information:
Process ID:
0x14c
Process Name:
C:\Windows\System32\svchost.exe
Access Request Information:
Transaction ID:
{00000000-0000-0000-0000-000000000000}
Accesses:
MAX_ALLOWED
Access Reasons:
Access Mask:
0x2000000
Privileges Used for Access Check:
Restricted SID Count:
0

UPDATE:
Managed to get a window to reboot the storage cluster with the incomplete delete. After rebooting the registration of the storage provider completed and is now ok. Will try to reboot the other storage cluster as well.

Illustrator CS4 application not responding after install

Anyone knows how to slove this problem? I got the creative suite CS4 today and after installed dreamweaver, photoshop, acrobat reader works fine and fast except illustrator. When I opened the application and click on open a file or create a file, the application will show "Not Responding".
Anyone know how to solve it? I am using vista

Wade,
You said that Adobe's employees come and visit this forum. And you are right, Adobe's employees disguised as a regular users are here all the time.
When the CEO said Adobe hired Low Level employees I did not know then what he meant. Now I know is for damage control.
I am not only one as you can only wish. Go to Adobe Feedback forum: http://forums.adobe.com/community/general/adobedotcom_feedback
Afraid of the wolves?
Can count higher than 1000.
But you have not answer the question. Where is the CS4 update?

Volume Keys not responding after installing service pack 1.

Similar Messages

Maybe you are looking for