Volume level on Lumia 625 changes by itself

Hi,
On my Lumia 625 I preset the volume to a number (as you do) and after a while it changes to a lower number by itself. Is there any way I can make sure this doesn't happen?
Thanks.
Solved!
Go to Solution.

As of now, there is no setting that would lock the phone and totally prevent from pressing the volume keys. Anyways, you may try to send your request here: https://windowsphone.uservoice.com/forums/101801-feature-suggestions.

Similar Messages

Macbook Pro 15" volume level changes by itself

Hi all!
About a month ago I have upgraded my rock-solid Macbook Pro 15" (mid 2012) from Mountain Lion to Mavericks. All seemed fine (with the exception of some known annoyances with WIFI) until last week when all of a sudden the volume level started to change by itself. It started going up and down, turning mute and turning on again and so on, just like an invisible hand or a remote access have taken control of my machine (it wouldn't even let me change the the volume using the volume buttons while this weirdness is happening). This has never happened before. To make things worse, I have then upgraded to Yosemite and all seemed fine but then the weird volume changes appeared again and I now am stuck with no straight forward way of reverting all the way back to the original Lion (which worked perfectly since Mac purchase back in 2012).
Can anyone help?
I have googled for similar issues and have seen some answers (mostly not that relevant) including a thread on this forum suggesting to reset the SMC. I have tried that using the suggested key-combination press, but it did not seam to have solved the problem, as the volime changes continue when I least expect it.
Is this a hardware problem? If so, would a change of the keyboard resolve things? [ At some stage I thought maybe the problem was caused by the fact the I have fiddled a little bit with the keyboard by lifting the :; key (next to L and under P) and applying a bit of WD40 to clean a tiny spil of sugary liqid that caused the key to get sticky. But the volume keys are way far on top of keybord so my assumtion was/is that the volume changes would not be related to the cleaning. ]
is this a software problem? Some thread on similar (not identical) issues had suggested there are some bugs in soft and Apple is aware. For this reason I gave Yosemite a go but the problem continues. Would reverting to Lion sole the problem you think? [ Maybe I should ask here if anyone can suggest how to go about this downgrade as Option-Cmd-R key-combination press at start up does not give me the Interner Recovery scree anymore, but keeps taking me (just like Cmd-R) straight to the OSX Utilities where can wipe of the disk (which I did) and reinstall Yosemite only. ]
I would very much apreciate any replies that might help me solve this issue.
Many thanks
Ty

HI Ty ..
Might be something you have no tried yet here > Troubleshooting issues with no audio from built-in speakers on Macs

When I set all the tracks in the latest Garageband to the same volume levels and save, when I open the file again they've changed back to a previous setting?

I'm trying to mix a recording in the latest 2014 version of Garageband, but when I set all the tracks in the latest Garageband to the same volume levels and save, when I open the file again they've changed back to a previous setting? Does anyone know why it changes even after saving the file?
Below is my iMac settings.

Do you have a back up?
If not you're into using file recovery software like File Salvage - you can download a free trial and it will scan the disk for you and tell you with might be recoverable. Actual recovery will require that you purchase the app. There may be many files with the same or similar names. Always recover the largest file size.
There are other such apps. Search on Macupdate or the App Store

Volume levels in logic pro X keep jumping up to +5.2 and +5.0 by itself?

Volume levels in logic pro X keep jumping up to 5.2 and 5.0 by itself.There are no plugins nor automation activated on tracks? how can i stop the track levels from jumping?
What do i do to avoid this?

I and the same problem and neither of these fixes solved it. Defintely not a controller problem as guessed.
The problem was solved by going to the step editor - similar to automation - but more hidden, and also taking place in the track at a point that I had trimmed out that heppened before the beginning of the composition.
I solved the problem by going into the step editor of the track and deleting the bar in the volume track that kept setting it, and not showing up as an automation curve.
I found this problem infuriating ,I really hope this solution helps.

Pan settings and sometimes volume levels change during playback

pan settings and sometimes volume levels change during playback without my touching them in Logic X! I haven't set any automation and strangely a similar thing happened to some plug-ins i used in pro tools m-powered. Any ideas as to why this is happening would be greatly appreciated? Cheers

pan settings and sometimes volume levels change during playback without my touching them in Logic X! I haven't set any automation and strangely a similar thing happened to some plug-ins i used in pro tools m-powered. Any ideas as to why this is happening would be greatly appreciated? Cheers

My mac volume level won't change after sleep

My "Line Out" (2.1 Speaker System) does not seem to accept volume changing commands either by the Apple Wireless Keyboard, or System Preferences > Sound. This happens all the time after I put the computer to sleep. Before when I switched to Internal Speakers then back it would "unlock" and let me adjust the volume, but that is no longer the case (I should point out that the volume controls are not disabled, it's just that changing the level does not do anything). I can however adjust and use Internal Speakers just fine. This forces me to restart my computer in order to adjust the volume again.

Resetting the SMC and PRAM did not solve my problem, however this did manage to solve my problem across reboots and sleep:
1. Command + Space / Open Spotlight.
2. Search for "Audio MIDI Setup".
3. Select your sound system.
4. Change the format to something else, then change it back.
At this point it should fix the volume level and allow you to change it. I have only done this once, and it has worked since I made this topic.
Let me know if it helps.

Can not change the input volume level of a track

I mean the buton for the volume in the track information window, between "Input" (Mono/Stereo) and "Monitor"
It is on the lowest level and not highlighted, so I can't move it.
On my iBook I got an older version of GarageBand 2, there I can change the input volume, but I want to use the iMac because I use an external Microphone.
I don't think its got something to do with the mic, I've tried different settings, with the line in, and the internal mic, but this input volume level bar ist never highlighted.
What's wrong?

http://www.thehangtime.com/gb/gbfaq2.html#volumesliderdimmed

Please Help! Sound is stopping in every 5 seconds until volume level is changed.

I have G60-535DX model and recently I came across a strange problem. Sound of my laptop speaker works fine for 5 seconds and then stops. When I change the volum level either from task bar volume icon or through keyboard shortcut it starts playing again for next 5 seconds. Please note that it has no issue with headphones.
I have used windows troubleshooting wizard, checked in device manager, drivers are up-to-date. Could you please post the solution for it?

Please reply with solution as its very annoying issue

Volume level Lumia 820

Why each time I turn on my phone volume level is at number 13 ? And not at the 20 or 30 I had it for example.
Solved!
Go to Solution.

walhir wrote:
It doesn't really clears the matter because ALL other (not nokia) phones are not doing this. If you leave them on 24, they stay on 24 after the next start. It's the same thing with my lumia 620. Regulations should apply for all devices, don't you think?
http://discussions.nokia.com/t5/Nokia-Lumia/Nokia-928-GDR2-volume-keeps-resetting/m-p/2139453/highli...
The silence will fall

How can you change the volume level????

Hi all:
I don't know if this is possible but sometimes I want to reduce or increase the volume level of several clips (10 or 20) by the same amount while they are linne up in the timeline, they are individual clips arranged back to back during the edit. I want to either up the volume by 10db or down 10db from baseline 0db.
Do I have to do it induvidually or is ther a way to select them and apply the change to all of them at one time.????
Your input is appreciated
Thanks,
AppleLou

And to go a step further, put them all into a Compound Clip, and you can apply a single filter to them all at once, plus keyframe your audio over time to them all at once.

Volume level ZEN NANO PLUS, can it be chang

I have a new ZEN NANO PLUS that I have bought in Spain.
I?ve had this model before and I know that, because of the EU ruling ( **bleep** those bureaucrats! ), the volume level is not as loud as the model you can buy in the US.
A few people have suggested flashing the firmware and installing the US firmware, has anyone tried this, and did they have any success?
I downloaded the US firmware and tried to install it on my player but no luck, and the player died aswell, but I?m not sure if I did the correct thing...
If anyone knows anything about this any info would be greatly received.
Thanks in advance
Neil

You shouldn't have problem using both player together in MediaSource even in transferring audio files(non-protected content). Are you referring to being able to playback PlayForSure subscription content? I doubt it is possible(personal opinion) for the player since I believe it's more to do with the hardware rather than software.
Jason

Can i change the volume level for just a part of a track?

i am trying to raise the volume level for just a little section of a track without raising the volume for the whole track, just a one little section. can i do that on garage band? how would it do that?

Yes you can
On the track instrument selector, there is a row of small buttons, one being an upside down triangle. Click the triangle to display Automation. The default controller is Track Volume. You will see a bright green line which is the volume level throughout the track..
Simply, go to the location where you want to reduce the volume, click on the green line to insert a control point. The first click is used the maintain the current volume. Go to the point where you want the volume to be reduce to, and click-and-hold the line and drag the new control point to the target volume.
NOTE: Use the Shift key to adjust incremental amounts.
Have fun!!

Changing volume level

I have a timeline with several speech segments in audio track 1.
I want to increase the volume level of each segment by +6dB.
When I select more than one segment at a time, the volume control disappear from the effects control panel.
Is there a way to increase the volume of all segments at a time?

Open the Audio Mixer and increase the level of the Master fader by 6 dB.
(Or the level of the Track 1 fader if you have more than one audio track)

The higher the volume level the worse the quality???

Two days ago I changed all my music to the highest volume levels by using the option in iTunes. Now it seems that all my tracks are of a worser quality. In fact iTunes has all files (checked in the explorer) changed 2 days ago. I thought the option wouldn`t change my files und not write in the files itself? Does anyone know, what happens exact by using this option. Please tell me, that there isn´t any changing of the sourcefiles or any reentcoding. Please tell me, that I fortunately only imagine that and how it works really. Thanks a lot.

The songs are clipping becaue you are trying to force the iPod to do more volume than it can handle.
You can usually tweak them up a little bit but not all the way.
The files are not "altered" as such. One of the ID3 tags is changed to use the new volume setting but just set it back to 0.
"the numbers all go to eleven. Look, right across the board: eleven, eleven, eleven, eleven..."
Nigel Tuffnel to Marty DiBergi

[solved]Command line script to equalise volume levels of all mp3 files

Hello guys,
I have a bunch of mp3 files within a folder. Unfortunately they have unequal volume levels. Some of them are far too low, others too loud.
Is there a simple command line script to equalise all of them?
Regards
Robert
Last edited by orschiro (2012-12-30 17:44:59)

I remember I found such a script a long time ago. I suppose it still works, here it is http://codepad.org/MLu1iscD. Please tell me if it works for you. By the way, it depends on mp3gain and python2-eyed3.
ps: As far as I can see, this script doesn't change the mp3 files itself, but stores the new volume in the id3 tag. This means, that you won't corrupt your files in any way, but the player needs to be able to get the volume information and adjust it. The script measures both the album and the track gain. Which one is used can be configured in the player.
Last edited by Army (2012-12-30 16:39:27)

Volume level on Lumia 625 changes by itself

Similar Messages

Maybe you are looking for