Volume level on my Ipod Nano

I bought two iPods nano for my daugthers, after load both iPods the volume level is not the same in both, is there a setting to be modified in order to get the same level of volume in the second one?

Go to Settings>Volume Limit and make sure the triangle is in the same place for both (the end if no limit is set). If it's the same, make sure that you use identical settings and audio conditions when comparing the two, and then try with a different set of headphones. If there's still a difference, then the one with the low volume might need to be sent back to Apple
Apple Retail
Online Service
Tom

Similar Messages

  • How can I turn off the volume limitor on my ipod nano?  I want to play it with a docking station, it is no where near as loud as an old 4GB ipod!

    Hello, please can you tell me how to turn off the volume limiotr on my ipod nano?  I want to play it on a docking station and it just isn't as loud as I want it to be.  An old ipod is much louder.

    I tend to select things from left to right and every time I am moving in a downward right diagonal motion during lasso selection I am missing a clear view and I am tending to have a more sloppy selection.  All this does is slow me down since I need to go back and hit those areas again.  The big arrowhead just get's in the way.  The original lasso tool with the thin line and small active point at it's lower left was far better for me.
    I don't like turning the cursors to precise because I like to see the active tool icon where my cursor is and as the icon changes as I hold modifier keys down.  If I am forced to get comfortable with using pricise cursors I guess I will, but man, I've never had to do this in my 15 years of photoshop use...
    I would absolutely LOVE to find a way to get the old lasso icon -- without the arrowhead above it.
    Is there any chance this option could be inlcuded in cursor preferences?  I'd give much thanks, Adobe.

  • The volume of 6th generation iPod Nano

    The 6th generation of iPod Nano is bigger and heavier than the 5th generation's.
    I wonder why there is no 32GB or 64GB iPod Nano because my songs was over 16GB in my iTunes and I have to unmark some songs during synchronizing my iPod Nano.
    I always connect iPod to my car and listen music through my car stereo systmes. It's awesome. My car supports iPod and I can select my song in my iPod's playlist through the touch screen on my car. Very very convenient~~
    I only want light and bigger volume of iPod Nano because iPod Touch is too complicated  and more expensive for me to listen music on my car.
    Can anybody tellme ??

    Physical buttons only.

  • I forgot my passcode for the volume limit, on my iPod Nano 4th Gen. How do I unlock it now?

    I don't remember when, but apparently I gave a very low volume limit some time ago, and protected it with a password god knows why. Now i cant remember the password and cant increase the volume enough. Help?

    The only way to reset the volume limit passcode is to connect the Nano to your iTunes library and restore it to factory settings.
    B-rock

  • Ipod  Nano recording level

    Is there a way to control recording level? My ipod nano records too low.
    How would I record Higher?

    At this point, the software people with iPods purchased in EU countries were using to remove the cap do not work on the 2nd gen nano. No word on when it will. So other than maxing your volume limiter and trying more expensive earphones there really isn't anything you can do right now.

  • IPod Nano 6th Generation Volume Button Issue

    The "-" volume button on my iPod Nano 6th generation is stuck in the "on" or depressed position against the case. It looks like the button either is binding against the case, or a spring-like mechanism beneath the button is broken.
    Any ideas on how to fix the issue short of taking it in for a service appointment?  Maybe by opening the case?
    A

    If you open it or have a 3rd party repair site work on it you will no longer be eligible for an out-of-warranty replacement from Apple at a price of $65/$75 (make a Genius Bar appointment before going.
    You can buy the switch and replace it but be sure you are up to it. Check http://www.ifixit.com for teardown instructions.

  • Unhappy with max volume level of ZEN NANO P

    Does anyone know how I can increase the volume level of my Zen Nano Plus.
    At the moment it goes to 25, but it is still quite low.
    Is it something to do with the way the mp3s are ripped or can I change something on my MP3 player?
    Thanks for your help!
    Neil

    As I stated in my earlier post, I don't have a Zen Nano Plus - I have a Zen Vision:M. Replacing the EU firmware with the US version has worked in this case - as it also did with my previous player (a 4GB MuVo^2). It has also worked with my friend's Zen Sleek Photo.
    There is no real reason why the firmware will not work, as the player's hardware is the same in both territories. Therefore, I can only put the problem down to a problem with the firmware update.
    Try replacing the battery with a fresh one (to ensure there is power) and follow the instructions on the <a href=http://us.creative.com/support/kb target=_blank>Creative KnowledgeBase[/url] for updating the firmware, as there is a recovery procedure outlined.
    The Solution ID is 265 - you can also find it as number 7 on the 8 most common solutions after selecting the Zen Nano Plus from the list ("Updating firmware for MuVo N200 or Zen Nano Plus"). You will need to redownload the firmware updater program from the Creative US website if you have deleted it.Message Edited by Lokiz0r on 07-2-2006 0:03 PM

  • Unlocking volume control on ipod nano

    I never locked the volume control  on my ipod nano but it is asking for a combination.  The volume is weak and seems to be getting weaker even though the battery is saying it is charged.  How to I get the combination and could something else be wrong with the volume?

    If you no longer know the combination or don't know what it was set as you will need to restore the iPod via iTunes to get past it. 
    I'm assuming you have tried another pair of headphones?
    B-rock

  • Ipod nano volume limit locked

    Hi
    I think the kids have set a combination code on the volume limit of my iPod Nano. Can I get it off and how? If I have to do some kind of reset can I re-sync my playlists from my iTunes library? Have over 1000 songs on and would hate to have to import/purchase again.
    All help gratefully received.
    Thanx.

    Restore your iPod. Restoring will erase the iPod's hard drive, reload the software and put it back to default settings. Once the restore is complete follow the on screen instructions and it should connect to iTunes and give you a prompt to automatically update your library onto the fresh installation. If you want to update manually or using selected playlists choose no and it will default to manual mode and you can choose whatever setting you like: Restoring iPod to factory settings with iTunes 7

  • Setting default volume level.

    I have a 2nd Gen Nano which I am using in my car. I have an OEM adapter which connects to the iPod through the dock adapter and allows the car's stereo controls to operate the iPod. (The stereo thinks it's a really big CD changer.)
    My problem is that the sound level from the iPod is significantly lower than that from either the radio or the actual CD changer, so when I have finished listening to the iPod I have to be careful and remember to crank the volume way down or else the radio blasts when I select a different source.
    Looking at the iPod I have made sure that the volume limit is set to maximum, and I am confident that I don't have a EU crippled unit since the sound level through the earbuds is plenty loud even at half volume and keeps going up from there.
    The thing is that when it first wakes up the volume level is always set to 50% on the slider. I cannot manually change the volume level when connected to the car because when it's connected to the adapter the iPod's controls don't work (besides it is mounted in a fairly inaccessible location), but I don't even know if doing so would help since it communicates with the stereo through the dock connector.
    My question is: Does the iPod's volume control have any effect on the signal level out through the dock connector, and if so is there a way to permanently adjust the default volume level the unit uses when it starts up? What I'd like to do is set the default volume level on the iPod to, say, 75% or whatever will balance it with the other source input levels that the car stereo uses. I tried adjusting the volume manually and then sliding the lock switch to 'Lock' but it didn't work.
    Thanks in advance.

    This sounds like the problem that I'm experiencing and <a href-"http://discussions.apple.com/message.jspa?messageID=2694517#2694517">aske d about a couple of days ago. The sound level resets to 50% after shutdown.
    I tried setting the levels in Audio MIDI Set Up as suggested above, but that hasn't changed anything.
    In answer to B_web, I am running my external speakers through the headphone jack.
    So, any other suggestions?

  • Volume leveling firmware update request

    I once had an old mp3 player that would automatically adjust all songs to match an equal playback volume level. However, on the iPod Classic 80 GB model, my songs play at unequal levels; I always have to turn the volume up for songs ripped from audio CDs. Could Apple release a software update to add the auto playback volume leveling to the iPod? Could this be included in Firmware version 1.1.3?

    Ken Bozarth wrote:
    Jeff,
    I have downloaded the MP3/AACgain. What folder can I find the tracks in my library that are currently stored on my ipod? Can I run the tracks through this program without having to sync them back to my ipod? Please let me know. Thanks!
    The program is run on the songs in the iTunes library, then the songs are re-synced to the iPod.
    As far as I know, it can't be run on songs already on the iPod (at least iVolume, which is what I use can't).

  • Reset volume levels?  Tags?

    Help!
    I tried to boost the volume of my AAC and mp3 files by shifting the volume readjustment bar in the 'get info' section up to the maximum. This didn't alter the volume, but just made all my tracks get to maximum volume at half way up my ipod's volume control.
    I then tried to put this back by moving the slider down to normal again. This has resulted in me ending up with everything now playing at a lower volume.
    I'm assuming there's now some embedded tag on each mp3 and aac file making the volume lower. How can I reverse this and get my files back to playing at their original levels?

    Well, something has DEFINITELY changed on my ipod, because the maximum volume is now lower, and it reaches that maximum volume when the volume level on the ipod is up to about 60%. From 60% to maximum it's all at the same level.
    I've checked all the other settings are as they were before - EQ off, sound enhancer at normal, preamp at normal and sound checker off. It's driving me mad.

  • Ipod Nano Volume level

    Hi, I have got an Ipod Nano 2nd Generation and use earphone that sit on your ears not in ears as I find them uncomfortable. The only problem with this is that I find that the volume is not very loud, I have it on the maximum, I know there is a volume limit set on all mp3 players but does anyone know if there is any way of making it louder?

    At this point, the software people with iPods purchased in EU countries were using to remove the cap do not work on the 2nd gen nano. No word on when it will. So other than maxing your volume limiter and trying more expensive earphones there really isn't anything you can do right now.

  • Volume levels on IPod Classic

    I don't know if anyone else has experienced this, but the early generation IPods I have had all played music louder in my cars than the later version Nanos, IPhones, ITouches, etc.  I know this because with my Gen 2 IPod Classic (wasn't called Classic then) I listened to my music at volume level 48 and it played as loud as I like it.  With my IPhone, ITouches and Video Nanos, I turn it up to 58 and it's still not as loud as the Classic.  And, yes, I have the sound limiter all the way up, and I have kept sound check settings cosntant.  Were the early Classics known for reproducing louder sound vo

    There is a Mac version of MP3Gain.
    http://homepage.mac.com/beryrinaldo/AudioTron/MacMP3Gain/

  • Erratic volume levels on Nano

    I am using iTunes 8.2.1 and have the newest update on the iPod Nano software. I checked the box next to "Sound Check" to even out the volume of all the music on iPod. Volume is differrent on songs, including songs that were from same CD. Any help would be greatly appreciated.

    Hi Jodmcc1,
    I hadn't seen this post earlier... But have you:
    A - Enabled the Sound check on your iPod in the settings menu?
    B - Additionally enabled this feature in your iTunes? I believe best described through these KB articles:
    * http://support.apple.com/kb/TA26590
    * http://support.apple.com/kb/HT2425
    Once properly enabled it should help moderate and level the song volumes when the muic is played on your iPod.

Maybe you are looking for

  • Manually Migrating from Oracle 10g to 11g

    Hello, I'm currently a student in an Oracle DBA class. I'm totally new to the Oracle world. One of our final assignments concerns upgrading Oracle instances without the use of DBUA. I've currently got Oracle Database 10g Enterprise Edition Release 10

  • Help: Can't change the Media End Timecode

    Hi, We are trying to Recapture a Clip that was originally Captured using "Capture Now" and accidently someone let the Capture continue past the end of the tape. This kind of issue doesn't cause a problem using the original clip, because all you end u

  • How do you display a image in apex

    I have a trouble for a long time.. I can't load a image in apex.. I do a lot of things but it never give result correctly some could help me.. Thank u....

  • Has apple named the the new ipad(3rd gen ipad) ipad with retina display

    Has apple named the 3 rd gen ipad ipad with retina display.

  • Will not start only spinning wheel

    My two-year old iMac 21.5 will not start. All I get is a gray Apple Screen and the spinner.   Before this restart, I changed the permissions for the hard drive to allow the administrator to have access to the whole hard drive.  I got a start series o