Volume Limit Failure

When I set the volume limit and press the center buttun, the volume drops far below the setting I just entered. What's up?

this is a new feature with the 1.2 updater thingy. on your ipod (if you're one of the lucky ones whose ipod still works after installing 1.2), go to "settings" then "volumne limit" and change the setting. you'll need to enter a code.
works for me anyway... hope this helps.

Similar Messages

Iphone 3gs- wont allow me to set a volume limit

my iphone laggs when i want to set a volume limit, consequently it doesnt set it
Message was edited by: Halo Beas7

Try resetting your iPhone by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.

How do I get to the Volume Limit again (iPod Red Nano)

I set this under Volume Limit in the Settings section but then when I went to change it, my thumb slipped and I accidentally set the 4 digit number for the Screen Lock (which I have not set) which was the 1st option. Now when I go back to Volume Limit to change it, I only see the Screen Lock option.
How do I get to change the volume limit again.
iBook 500 Mhz Ser#UV1331R1LCD Mac OS X (10.4.8)

This is exactly my problem. I have a newly acquired 1st generation Nano. I followed the directions from the knowledge base to the letter. But after confirming the combination, the screen does NOT return to the volume bar to allow a change of the volume limit, and I can find no work around.
Further input would be greatly appreciated.

Directory Scan and Volume Structure Failure

My imac (white, 24") has been running slow and freezing up while attempting to preview files. Ran Disc Utility and OnyX, which gave me the following permission issues:
Permissions differ on "usr/share/derby", should be drwxr-xr-x , they are lrwxr-xr-x
Repaired "usr/share/derby"
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/
But otherwise, both said the disk was fine.
Ran TechTools failed the Directory Scan, Format Scan, and Volume Scan. I restarted from a second partition on the same HD. This partition passed all tests.
I repeated all three tests on the original partition. This time, Disk Utility could not verify or repair the original partition and no longer recognized it as a valid startup disk. I erased the partition and restored from a Time Machine backup. Now, I get the following permission errors:
Permissions differ on "usr/share/derby", should be drwxr-xr-x , they are lrwxr-xr-x
Repaired "usr/share/derby"
ACL found but not expected on "Library/Preferences/Audio"
Repaired "Library/Preferences/Audio"
ACL found but not expected on "Library/Preferences/com.apple.alf.plist"
Repaired "Library/Preferences/com.apple.alf.plist"
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/
And while once again OnyX and Disk Utility says the disk is fine, Tech Tools still reports a Directory Scan failure and Volume Structure failure. A subsequent Surface Scan passed.
Ideas? Is this a software failure or a hardware failure? Both partitions are running 10.6.3. This is the second HD on this imac, the previous 750GB failed completely and could not be restored.

Kyle W wrote:
It says permissions are repaired on those items, but when I verify permissions, they are still not right.
See Mac OS X: Disk Utility's Repair Disk Permissions messages that you can safely ignore. It isn't that the permissions themselves are wrong but that the database of correct permissions on your hard drive the utility refers to has not been updated to reflect the permissions settings & directory structure changes in the most recent OS updates. This is a known issue that affects everyone, but as the article says, you can ignore it.
Mac is not experiencing the same slow down on routine items as it was before, but TechTools is still saying there's a problem.
What version of TechTools are you using? If it is not a current one it may not recognize the recent changes in the file system structure made in Snow Leopard.

Volume limit not going higher than about 75% ?

Hi, I just bought an iPod Classic 160GB after my trusty 30GB Video died, and I was denied service.
I seem to be having a little problem with it. When I try and put the volume limit all the way up, it sounds louder then it was, but when I want to accept this setting, the limit jumps back to about 75%, even though the selection arrow is all the way at the right?
I could really use this, since when I'm listening to certain podcasts, I have trouble hearing them when I'm on the train or bike.
Is this a bug?
I currently find myself turning up the volume limit without accepting, and waiting for the currently playing track, which is a very clumsy way of doing it.

Don't even think about it. As b-rock states, you cannot over-ride it and you cannot install "American firmware" onto your ipod. Apple have taken steps to prevent anyone over-riding the volume cap.
However, what you can do is buy yourself an external headphone amplifier. There are several different options, such as the famous CMoy amp (usually mounted in an Altoids tin and also known as the Altoids amplifier), or simply search online for headphone amplifier.
Personally, I own both an Altoids amp and a FiiO E11 amplifier. The Altoids amp runs on a 9volt battery, and can be purchased ready-made or as a kit to build yourself if you have the skills. The FiiO has a rechargeable phone battery in it, which is replaceable.
It would be irresponsible of me if I did not caution you to take care when you using one of these amplifiers, not to have it too loud for too long, which could seriously damage your hearing. (Hence the reason for the EU directive.)
I found that the benefit of one of these amps is to be able to hear the detail in the music, and not simply to have it loud. Because of that, I prefer the FiiO.
I do not receive any reward or compensation for my recommendation of either of these products. There are alternative brands available.

Volume Limit

I have a 60 GB video Ipod and there seems to be a problem with the volume limit settings. I followed the instuctions for changing volume limit on this site but it changes back to the default setting when I set it to be louder. When I scroll the volume to max, the triangle moves to max but the volume bar does not stay on max after I confirm the setting. Can anyone help me with this?

That seems to be the way it works on mine. My blue triangle is all the way to the right and I generally only have to set the volume to about 40-50%. I ride noisy public transit and have no problem with the volume.

Volume limit and contact

Hi
does anybody have a problem with Volume limit in iphone
i set the limit and lock it but still nothing happens?
ne suggestions
Also does anybody know how to create contact groups in Iphone 3g

Connect the iPod to your computer an start iTunes.
In the summary Tab of the iPod page in iTunes you will see the 'Restore' option.
This will erase the entire contents of your iPod and reinstall the software for you.
Before you do that though, just try connecting the iPod to the computer and opening iTunes as this is supposed to unlock the iPod as described here :-
http://docs.info.apple.com/article.html?artnum=302255
Unlocking iPod
You can unlock iPod in one of two ways:
Enter the combination on iPod using the same controls you used to set the combination. If you do not enter the correct combination, the digits onscreen flash red. When you enter the combination correctly, iPod will unlock and return you to the last viewed screen.
Connect iPod to the primary computer you use it with (the first one iPod synced with), and open iTunes. When you disconnect iPod from the computer, it will no longer be locked.
If you can't unlock iPod using either of these methods, you can restore your iPod to factory settings. Please note that this will erase all data on your iPod. Afterwards, you can add your music and data back to iPod.
If you want to change the primary computer that your iPod is associated with, do this:
Restore your iPod. Warning: The restore process cannot be undone. All of your songs and files will be deleted. Always make a backup of your important data.
Connect your iPod to the computer that you want to be the primary computer.
Open iTunes and synchronize.

Why is the sound low on my Ipod? When I have my earbuds in I have to have the volume almost all the way up. I have the volume limit maxed out also. Same thing when I plug it into a boombox

Why does my Ipod play at a low volume? When I have my earbuds in I have to have it at almost full volume, and when I plug it into a boombox it doesn't play as loud as the radio or a cd. I have the volume limit turned all the way up in the settings also. All my songs on my Ipod were burned from cd's(if that helps) thanks.

Sorry, I have the same issue.
So far searching threads here is not coming up with anything.
I have set aside my restore discs, to start the process of ripping the drive clean.
I tried Omni Sweep, but all it did was confirm the space I counted up.
Still does not show what's hidding. 113GB worth on mine.
That software really boggs down the system.
I could not load an email with it running.
Good LUck as well.

How can I over ride the combination code to access the volume limit?

I want to increase my volume limit but there is a combination lock that shows up and I dont know what the code is! Is there some way I can over ride this and increase my volume limit? It's hard to hear any music.

The only way to bypass the volume limit passcode is to restore the device to factory settings in iTunes.
Restoring iPod to factory settings
B-rock

IPOD 160 GB volume limit

I have purchased the new iPOD 160 GB classic, ... the problem is I can't figure out the code for the volume limit... none of the common ones like 1111 or 5555 are working ... anybody with the same problem please help ...[:(]

If you can't remember the code, you'll have to restore the iPod.
http://docs.info.apple.com/article.html?artnum=303414

I do not know my volume limit code so i can unlock, how can i find out what it is or change it?

Need to find out my volume limit code hoe do i do this?

See my response on your other post.

Any possibility of bypassing the EU volume limit?

I am (now) well aware of the countless posts on the EU volume limit, but what individuals may lack in power make up for it in number through the continuous probing on this matter.
Just to lay out the story, I have lived in Asia for the past 20 years, and during that time I have owned 2 iPods; a 40GB iPod Photo and a 30GB iPod Video. I recently moved to Italy to partake in a year's study abroad as part of my degree program in Australia, and sadly, shortly after arriving here, my iPod video died. So I naturally decided in replacing the iPod Video with a new iPod. I made my order through Amazon Italy, as it was cheaper buying a new one online than buying it from the Apple shop in Rome. The iPod had arrived last Friday (11th) and I finally synced it Sunday night.
To my surprise, after syncing my iPod, I was presented with what I now know as the EU volume limit, which I must say is the most annoying introduction to the iPod. I fail to believe why people should be subject to this ruling by the various policy makers in Europe when it should be a person's own prerogative to the volume they want to use for their audio enjoyment, regardless of whether it is deafening or not.
I hope a solution can be found, because I don'tt properly enjoy most of my music any more without having the bother of background noise being so noticeable. I use my iPod at a higher volume with headphones because I want a sense of isolation; not necessarily to go deaf, but so I can at least enjoy my music without having to hear background noise as well as filtering out disturbances so I can focus on my thoughts better. With the volume limit, it's just not enjoyable any more.
Message was edited by: euggal

Meg St._Clair wrote:
Asking the question again is not going to get a different answer. Sorry.
True, I wasn't expecting a new answer, as I pretty much guessed that the chances of that were nil by seeing how other posts of a similar topic had developed.
But I was actually wondering if there might have been any news on this gopod program I've read about? Apparently they've stopped support after gen 3/4? Anyone have any information on this? There website seems to be just a single page with no news or anything.
And you also mentioned amps, are there any that you could possibly recommend?
I was considering on possibly requesting for a reimbursement from Amazon, as this information on the EU volume limit was not disclosed in the product description. For someone like me who wasn't aware of this before purchasing, it certainly was an unwelcoming surprise to find it. That way, I'll see if I can acquire an iPod from a region which doesn't have the limiter implemented.
And thank you for your quick response, I appreciate it.
Message was edited by: euggal

How can you take off the volume limit?, How can you take off the volume limit?

How can you take off the volume limit on iPod touch ?

Which "volume limit" do you mean?
All iPods have a volume limit feature that you can set yourself and on your iPod, go into Settings/Music/Volume Limit. There, you can set the volume limit to maximum, which is the same as turning it off.
However, if you mean the EU (European Union) volume restriction, on all iPods sold inside the EU, you cannot turn that off.

Why does the Volume Limit keep Changing?

Hello, I have an I-pod Classic 80 GB and the maxium volume limit will change from time to time on it's own. I want it at maxium so I go to volume settings move the little arrow to the limit and press the center to lock it in and fiddle with that stupid combination crap but it will never stay put! So, how can I keep the volume settings from changing?

(a) You will always get a different client side port, that's normal.
(b) the Registry port is 1099 but RMI servers are exported on a system-selected port unless you specify one. If your Registry and RMI servers are in the same JVM they can share ports

Sound doesn't work for earphones unless on "Volume Limit" page. Why?

The sound for my ipod nano won't work when I plug in my earphones, unless I'm on "Settings" --> "Playback" --> "Volume Limit". But the speakers play the music perfectly when I unplug my earphones. And yes, I've tried using multiple different earphones, to make sure my earphones aren't broken. Wonder if anyone else has had this problem? I've tried "resetting" the ipod many times, but that doesn't help either.

Okay, so in frustration I finally methodically tried the following:
1.) Uninstalling the driver and selecting to delete the driver file
2.) Restarting the machine
3.) Installing the new driver
I repeated this until I'd tried all of the following drivers:
Windows 7 32bit, Cirrus Logic - Failed
Windows 7 64bit, Cirrus Logic - Failed
Windows 7 32bit, RealTek - Failed, * - Yes, I know the device is Cirrus, but I wanted to be thorough
Windows 7 64bit, RealTek - Failed
Then I did the same equivalent run through for Vista.
Then, in irritation, I did the same but for Windows XP.
Solution: The Windows XP Cirrus Logic driver worked perfectly.

Volume Limit Failure

Similar Messages

Maybe you are looking for