Volume Logic Removal on Itunes

Hello everyone this is my first post to the forum so hopefully this is in the right spot. Okay so here's my problem. I downloaded volume logic a while back and it worked great for quite a while but now when I open my itunes the "Volume Logic Extended Demo" box comes up and has three options: 1) Extended Demo, 2)Activate with Serial Number, 3)Buy Now. Alright so when I try to select any of these three options nothing happens and the box remains on the screen not allowing me to do anything within itunes. Basically I can no longer use my itunes because of volume logic so I obviously want to remove it from my mac. Now to the next problem, I've searched volume logic on my finder and deleted every file related to the program and its still on my itunes. This is getting pretty frustrating, so I was wondering if any of you all had some suggestions, walkthroughs on what to do, etc. Please let me know! I appreciate your help!

http://discussions.apple.com/thread.jspa?threadID=1308123
Regards.

Similar Messages

  • Volume Logic for Mac iTunes

    Does anyone have pro's & con's concerning Plantronics Volume Logis for Mac iTunes? I'm looking for plug-ins that would enhance the iTunes sound quality.
    Thanks,
    Michael

    iVolume claims to work with iTunes' Sound Check to play songs at the same volume. The iVolume FAQ says the adjustment will carry over to burned CDs & iPods, too. It will not work on Music Store downloads due to DRM.
    I've read people on this forum say it works pretty well.

  • What's With Volume Logic Plug-In Not Working With iTunes V7. and Up

    Hello Folks. I recently updated to iTunes ve 7.0.2 and now my great Volume Logic Plug-in won't work. I downloaded the latest update and then read info on the Plantronics site about the problems with the plug-in with new itunes updates.
    Is anyone here figured out what's going on or a workaround. That plug-in makes such a positive difference in music sound quality, the tunes almost feel "naked" without it
    Steve

    Prior to the 1.3.2 released (beta or the now-available final), Volume Logic did not work at all with iTunes 7. According to Plantronics, Volume Logic does not work with Airtunes and the AIrport Express (it's stated right in their FAQ).

  • Anyone using iTunes 7.2 with Volume Logic ??

    I am wondering if it is safe to use iTunes 7.2 with VL? Is the water warm?
    Cheers, S.
    PS: would rather be with iTunes 7.1 with VL than with 7.2 and no VL.

    I upgraded to 7.2 and can tell you that Volume Logic seems to be working fine.
    J

  • For all those that use the Volume Logic plug-in with iTunes

    Volume Logic has updated their website www.volumelogic.com that they are aware of the issue with the plug-in not working with iTunes 7.o for both Mac and Windows versions. They are working on a fix. (thank God! as normal iTunes audio *****!)

    There's also a really useful blog article that summarizes how you can tweak the new layout: http://blogs.skype.com/2014/11/13/getting-to-grips-with-the-2014-skype-layout/
    NanaTeppler wrote:
    I just upgraded to version 6.22.0.107. My chat window for IMs now has blue text on a lighter blue background. Now some of us are old and decrepit and find this difficult to see. Is there a way to change the chat area text back to black on a white background?
    Currently there's no option to deactivate the blue chat bubble background, but we've heard the feedback from quite a few users and are looking into how we can improve the readability.
    Follow the latest Skype Community News
    ↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

  • ITunes 10 and Volume Logic

    Yes, I still use the old dinosaur Volume Logic and remember too well what happened when iTunes 7 rendered it useless and it took Plantronics months upon months to fix it. Since then, I have been very reluctant to update until I know for sure that the upgrade will not do the same thing. Is anyone else still using Volume Logic and already updated to version 10?

    I have a beta of 10.6.5 installed, along with iTunes 10.0.1, and have come up with a very easy way to get VolumeLogic installed and running in no time!
    Make sure iTunes is not running before proceeding!
    • Download the latest version of VolumeLogic here: http://bit.ly/c76nni
    • Unzip and move the plug-in to "Macintosh HD/Library/Audio/Plug-Ins/HAL."
    • Repair permissions with Disk Utility.
    • Afterwards, download the latest eSellerate engine (v4.0 at the time of this writing) here:
    http://shopper.esellerate.net/ics/support/default.asp?deptID=5620
    (The Mac v. should be the very first one in the list.)
    • After it's installed, launch iTunes. VolumeLogic will say there's a product activation error, do you want to ty activating again? Click on Activate (or OK) and boom! Instant registration! No serial number, Terminal hacks, or poking into package contents.
    Hope someone finds this very helpful! I've been using VL on both Windows and Mac for years! Greatest audio plug-in ever!

  • Volume Logic 1.3.2 and Leopard work-around

    I found a good work-around that got VL 1.3.2 working under Leopard.
    I found the "fix" at Veerle's blog...
    http://veerle.duoh.com/blog/comments/nomore_volume_logicupdate/
    Here's the summary so that you don't have to jump to another site...
    Quit iTunes
    Download iWOW (updated for Leopard) Demo and install - http://www.srs-store.com/store-plugins/mall/iwow-plugin.asp
    Quit iTunes or dont start iTunes....
    Drag the iWOW plugin out of /Library/Audio/Plug-ins/HAL/ to the desktop
    Ctrl Click iWOW plugin (show package contents)
    Goto Contents/MacOS/ (you should see iTea.)
    Ctrl Click VolumeLogic plugin (show package contents)
    Goto Contents/MacOS/ (you should see iTea.)
    Replace the iTea located in the Volume Logic plugin with the one from iWOW on the desktop.
    This was all I needed to do, since I was able to activate VL without a problem. If you get an activation error from eSellerate, try the following...
    Download the Latest eSR SDK - http://webvise.mindvision.com/pub/mac/eSellerateEmbeddedSDK.dmg
    Mount the eSellerate Embedded SDK and look in the "eSellerate Libs" folder for "EWSMacCompress.tar.gz"
    Go to /Library/Audio/Plug-ins/HAL/VolumeLogic.plugin
    Ctrl click and choose "Show Package contents" and open the folder "Resources"
    Replace the "EWSMacCompress.tar.gz" with the one from the eSR SDK dmg you just mounted

    In one of my projects I used a third-party Jar-file. I placed it into the code/jars directory of my SAP BC package.
    The "original" mail.jar resides in sapbc47/Server/lib. Ever tried to replace it with the newer one ?

  • Volume Logic or iVolume for iPod??

    I cannot get the latest version of iTunes (7.3.1) and the iPod (3.1.1) software to share the Options/Volume Adjustment information for each song in my music library. Since the Sound Check feature is mediocre at best and annoying at worst, I've turned it off and have spent many hours going through my 3,000+ iTunes music library, manually adjusting the levels using true VU meters. When I sync with the iPod, it seems that this information gets transferred, but it gets corrupted, and iTunes volume setting changes are magnified (sometimes by a huge margin!) on the iPod with even worse results! Third party vendors like Volume Logic make a plug in for iTunes that helps maintain consistent levels in iTunes only. So does iVolume. Obviously, for everyone who listens to their iPod in shuffle mode (a majority of iPod owners), this is a huge deal. As far as I know Apple hasn't done anything to fix this; I would think it would be relatively easy to at least make it so that the Volume Adjutment settings in iTunes get transferred to the iPod. Is there any fix in beta, or is there a workaround? I'm afraid to even go down this road on the iPhone! Thx.

    Hi,
    I have had the same problem.
    I tried using Sound Check but was well aware not to expect too much knowing that it only appears to store the peak value rather than the average. (I would use iVolume, but it isn't available for Windows yet.) Anyhow, the result was certainly better than not using Sound Check. Then I set about making adjustments to those tracks that were still too loud or quiet. While they sounded fine in iTunes when I synched to the iPod the adjustments had been hugely exagerated. (Tracks that had been given a 'negative' gain were extremely quiet and those give a 'positive' gain were extremely loud.) I was able to correct the problem by dividing the Volume Adjustment value that seemed fine in iTunes by a factor of 7 to get the volume about right in the iPod. Why 7? Well it was simply that I found that there are 7 clicks between the large divisions on the volume slider. So if I had a setting of one large division of Boost or Cut on the slider, I then just scaled that down one minimum increment on the slider. This made it a quick job to go through the 20 or so songs I had to trim with not much time to spare before the party.
    Of course now the levels are not right when played for iTunes. So it is still an annoying bug!
    How do I go about reporting a 'bug' to Apple?
    Thanks

  • VOLUME LOGIC FOR MAVERICKS

    As many of you out there i love Volume Logic, so with Mavericks on my IMac i couldn't run it. But there's a solution i've come across while looking for an alternative.
    I MUST STATE THAT THIS IS NOT MY WORK I'VE JUST FOUND IT ON THE WEB AND IT WORKS
    1) Run Audio Hijack Pro and select iTunes as the source input application in the left-hand side of the main window.
    2) In the AHP pull-down menu, select About Plugins
    3) In the window that pops-up, select Load and navigate to where the VolumeLogic plugin resides, that would be HD>Library>Audio>Plugins>HAL>VolumeLogic. Do not worry about loading the iTea resource file manually, it will load up automatically, you do not have to do Show Package Contents to resolve this. Just select VL from where it lives in the plugins folder and move on to the next step.
    4) Go back to AHP and in the main window select an empty effects slot, in the pull-down sub-menu that appears simply select iTea effect>Volume Logic.
    5) Hit hijack in AHP and enjoy Volume Logic again, in Mavericks.
    ENJOY

    Volume Logic is one of my MUST-HAVE pieces of software. I really wish someone would just re-package the core audio technology and make it available again-- I'd pay $100 for it, if it worked in the latest versions of OS X!
    But alas... We resort to constant workarounds....
    I just tried this on my iMac, OS X Mavericks (10.9.2), and I hit a snag in step #4... I see no "iTea" or "Volume Logic" anywhere in AHP's effects window pull-down sub-menu... it's just not "simply appearing."
    You say you found this on the web... Can you direct me to it?
    Thanks for any help!
    Keith

  • Help uninstall volume logic please!

    I'm going crazy, I cant uninstall Volume Logic. I've tried everything, theres no uninstall folder even if i reinstall, i took out the com.octiv.VolumeLogic.plist, i have no /Library/Audio/Plug-ins/HAL/.
    I have the newest iTunes... please help I hate it so much.

    Contact the developer. You do realize they have discontinued the software.
    http://www.plantronics.com/northamerica/enUS/company/vl.jsp

  • How can I remove an iTunes account from a computer I'm giving away?

    How do I remove my iTunes account from a computer that I am giving to a student in my school? I want the music I purchased to play, but I don't want the student to have access to my email address or my credit card that is tied to "my account". I went through the steps to deauthorize a computer but encountered two problems:  1) The only command offered was "deauthorize all". There was no list of the authorized computers where I could check a box to select the one to deauthorize.  2) If I want to leave the music with the computer, but remove the authorization.

    If you are giving the computer away you should not include music you've purchased: the purchase doesn't include the right to make copies to give to other people, which is what you would in effect be doing. The same applies to any purchased sofrtware which wasn't bundled with the computer when new.
    The proper procedure when selling or giving a computer is to erase it completely and restore it to its out-of-the-box condition from the original disks. You should also make sure to include the disks which came with the computer.

  • ITunes 11.2.2 for Windows x64 will not successfully install.  Removed prior iTunes, and still will not install. 10.7 installs just fine, but constantly asks to upgrade to 11.2.2.  Any Thoughts?

    iTunes 11.2.2 for Windows x64 will not successfully install.  Removed prior iTunes, and still will not install. 10.7 installs just fine, but constantly asks to upgrade to 11.2.2.  Any Thoughts?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component won't install normally.
    If needs be, the Microsoft Program Install and Uninstall Utility (MS Installer "Fixit") may be able to help force through the installation.
    tt2

  • How to remove an iTunes account?

    I was recently given an iMac 2011 for christmas, on first boot up i entered my iTunes details sucessfully and finnished setup. Before doing anything on the iMac I updated the software, however when it finnished the app store said that there was an app update, when I tried to download it said that it was only available for another itunes account "[email protected]". The problem i have is that i cannot download the update unless i sign in to that account, i dont know who this is and wish to remove it from my iMac but dont know how. If anyone can help it would be much appreciated.
    Thanks

    Hello! scottocs
    Me to have the exact same problem, I can not solve the problem.
    To solve the problem:
    1. Download the twitter app from the App Store,
    2. Right click (control click) the app and click show package contents,
    3. Open contents,
    4. Copy the folder that says '_MASReceipt'
    5. Paste that folder in the same location in the app you downloaded off of the Internet, replacing the original one,
    6. You might need to restart the App Store or your computer for the change to take affect,
    Please tell me how to remove this iTunes account?
    <Email Edited by Host>

  • How do I remove my Itunes content and put it on another computer?

    How do I remove my itunes content from one computer and put it on another?

    This is not a massively difficult process and there are several ways to do this.
    In fact you can keep iTunes on more than one computer (up to a max of five computers) and sync them via iCloud/iTunes Match providing you pay the annual subscription fee.
    Also you can transfer files between computers by enabling Home Sharing on both PC's and drag and drop files via your iTunes side panel or alternatively you can copy the iTunes folders/library from one PC to the Other over a network and import the files manually via "FILE... add folder or add files"...
    Easiest way I think is to ensure that both librarys are on the same drive (ie C Drive) and in the same folder (ie C:\Music) .. you can however use one PC's only to sync your iphone/ipad/ipod to ... otherwise you have to delete and resync and backup/restore your devices each time you switch between the PC's.
    Hope that helps

  • How do you remove the iTunes symbol off u phone, I can't  make any calls

    How do I remove the iTunes symbol from my phone, I can't retrieve any apps

    Connect in iTunes. iPhone will be detected in Recovery Mode. Restore.

Maybe you are looking for