Volume maxed out

I recently bought a universal cradle for use with my Nano and now I have been occasionally experiencing a wierd issue with it. When I leave my Nano in the cradle for an extended period (i.e. over the weekend or longer) when I first use it again, the volume is set all the way to the max. This never happened with my Nano prior to getting the cradle and does not happen to my 3rd Gen Ipod when I put it in its cradle.
Any suggestions on how to deal with the volume issue?

You might note that checking the box to set a volume limit actually DOES limit the volume even when set to maximum...
Try your earphones on some other device audio out to see whether your earphones are the problem. About a month ago, I began having trouble with volume in higher than normal ambient noise situations... turned out my Apple earphones somehow had become less sensetive to the shuffle's output level. I went back to a previous set of earphones and was back at the normal volume range.

Similar Messages

Spontaneous volume max out

Hi
recently, while recording with garageband 4.1.2, the volume will spontaneously max out, causing pure static for about 5 minutes, but then go back to normal. if the recording is left running, the static will come back again and the same process will repeat. if I stop the recording tho, sometimes the volume max out will disappear and the recording will be fine (as if the max out never occurred), but other times the max out will remain.
any thoughts? I use a shure sm57 mic into a Edirol FA-66 firewire recording box. It's worked fine for the past 4 months, just in the last week has it started acting up.
any help would be greatly appreciated, cheers!
Rob

You could try reloading the firmware but it might be a hardware problem - button stuck down, maybe? If so, try exercising it. PB

Volume Maxes out with headset

I can't record voice memos using the headset mic without the volume maxing out. I'm using the stock mic. Any ideas how to fix this?

You can try to remove and recreate the ALSA state file.
Maybe the permissions of /var/lib/alsa/asound.state are wrong.
See this Arch wiki article for reference.
You should also check the journal of the alsa-store systemd service for errors:
journalctl -u alsa-store.service

My volume maxes out when I tap it for a slight increase - why? (not sweat-related)

volume maxes out

If you wish to submit comments to Apple, the best way is to use their feedback pages.
http://www.apple.com/feedback/itunesapp.html
It's not likely that anyone from Apple will see your comments here among the thousands of other posts.
Regards.

Volume maxed out but still not loud

my shuffle (current gen) has worked fine for about 6 months now but recently the volume has lowered...its really weird. i tried changing the setting in the settings tab on my comp to the max and its still not as loud as it was before. any advice would be nice.

You might note that checking the box to set a volume limit actually DOES limit the volume even when set to maximum...
Try your earphones on some other device audio out to see whether your earphones are the problem. About a month ago, I began having trouble with volume in higher than normal ambient noise situations... turned out my Apple earphones somehow had become less sensetive to the shuffle's output level. I went back to a previous set of earphones and was back at the normal volume range.

Microphone Volume Maxing Out

When I'm using Rosetta Stone with the built-in microphone on my iMac, I generally turn the input volume down to around 67% to minimize distortion. However, for some reason the volume always goes back to 100% after a few minutes. It's really annoying to have to keep on bringing the volume down. What's the issue and how can I fix it?

After having the same problem as you guys for a while, I thought all hope was lost. I gave up for a while as manually readjusting the microphone volume every 5 minutes was such a hassle. While watching Merlin Mann's Desktop Tour Video (Linked for awesomeness: http://www.vimeo.com/2831715), I installed one of his mentioned applications: SoundSource (http://www.rogueamoeba.com/freebies/).
At first, I thought this could be a nifty little tool for adjusting the input volume fast when Rosetta Stone went crazy. However, after using it for a couple hours, I noticed that the input volume hasn't changed at all. I'm not 100% sure if it's SoundSource's doing, but all I know is I no longer have the microphone problem now that I'm using SoundSource to monitor my input volume levels.
Give it a shot if you're having this problem. It just might work for you too.

The volume of Youtube is extremely low, even maxed out.

I would say that for the past two-three weeks I've been having a problem where my Youtube volume in Firefox is extremely low. In order to hear anything really I have to have my Windows volume at 100%, my speaker volume maxed out, and Youtube volume at its highest.
I Watched the exact same youtube video in chrome and its so LOUD! I had to turn my windows volume to 50% and my speakers way down and it was still louder than Firefox. I searched for similar issues and found one that exactly matched my problem, I even followed the suggested steps to fixing the issue at hand but nothing has worked.
Steps completed so far:
-Fresh install
-Cleared cookies, cache, site preferences and offline data
-re installing flash
-Cleared flash cookies and settings
I dont want to abandon firefox but this issue is extremely annoying and there doesnt seem to be a logical fix available. Any help is appreciated.

Philip,
I want to thank you for your suggestion. There was an issue where the volume for the Firefox application was turned down extremely low resulting in the issue at hand. I have since corrected this thanks to you!
James,
I appreciate you trying to help but I explained in my question that I had the YouTube volume up to 100%.

All-in-one PC volume is too low even when maxed out

When playing web content with sounds like youtube videos, the sound is too low even when the volume in the cotrol panel is already maxed out. what do i do? My desktop is an hp 22 all-in-one touchsmart pc.
Thanks!
Cynch

Hello @Cynch,
I understand that you are having issue with your HP TouchSmart 22 All-In-One Desktop PC where the volume is low when listening to online content. I would be happy to assist you, but first I would encourage you to post your product number for your computer as there are various version of the HP TouchSmart 22. I am linking an HP Support document below that will show you how to find your product number. As well, if you could indicate which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this and the product number I can provide you with accurate information.
How Do I Find My Model Number or Product Number?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Sound volume low, even though maxed out on sliders

My iMac no longer seems to be playing sound at maximum volume. I am sure it used to be plenty loud, now, I have to really listen when there is sound, especially on things like .mac tutorials. I have the volume sliders maxed out.

Unfortunately, you are not the only one. This has been reported elsewhere, and there doesn't seem to be any fix that I have seen. Your only solution may be to revert to 10.4.6.
I'm sorry to be the bearer of bad news,
Miriam

Microphone too quiet in Windows 8.1 all volume settings maxed out.

Hello,about a two months ago I upgraded from Windows 7 to Windows 8.1 and after that, my microphone in Skype doesn't hear me unless it is maxed out and I am shouting. It works without problems in Windows/other applications (Windows Sound Recorder, Teamspeak 3, Portal 2 ingame voip, ...) So my specifications are following:Windows 8.1 Pro 64bitSkype 6.16Headset Sennheiser PC 360 http://www.alfacomp.cz/php/product.php?eid=105HK5000000000ZFKMotherboard Asus P8Z77-M Screenshots of my settings are attached And here is what i tried to doo:1) Updated Skype and alter reinstalled Skype.2) complete uninstall and install of Skype according to this https://support.skype.com/en/faq/FA10634/how-can-i-completely-uninstall-and-then-reinstall-skype-for-windows-desktop3) tried different driver versions (latest version for W7, W8 and W8.1) from here http://www.asus.com/Motherboards/P8Z77M/HelpDesk_Download/, latest available from http://www.realtek.com.tw/downloads/ (version 6.0.1.7246) and even these which Windows Update installed.4) Tried Skype App for Windows 8 (enabled permissions for microphone and webcam)5) Tried different microphone.6) Chatted with Skype support and went through their checklist of settings to make sure I didn't forget anything Any help would be appreciated.

i am having the same problem here is what i tried i have tried trouble shooting this problem many ways but it never quite works. i will list what i have done so far. 1) tested with another mic. same effect 2) maxed the mic volume in the skype settings 3) tested with another audio recording software. mic still works great 4) tried resetting everything i could think that would help (computer, skype, skype settings) 5) when i tried resetting skype settings by going into appdata and changing the skype file into Old_Skype forcing skype to reload its settings, it would appear to work wonderfully when i started up the software. it would walk me through the setup settings and the bar that shows mic volume was going up to my voice as it normally does. then after setup and i get into a test call, my mic is back to sounding incredebly quiet. 6) i went into sound setting and tried many combinations concerning mic boost which was already up, tried disableing software setting override, tried disableing all sound effects. all still nothing. i am using a turtle beach x12 but that shouldent be the problem because a logitech i have is having the same problem. i am running on windows 8.1 i have tried skype calls with friends they all say my mic is very quiet. much much quieter than normal, even when yelling into the mic. if i think of anything else you may need or if you ask for it i will add to the post.thank you all Edit: after more testing i may have discovered the problem. skype is only detecting my onboard mic and is trying to use that (im using a laptop). how can i get skype to detect my turtle beach headset? other programs seem to just fine Edit 2: disreguard the first edit. when speaking into the mic in a way that the on bord mic wouldn't be able to pick up, skype got the sound i was sending into my headset mic. still quietly but somewhat louder because i was closer to the mic on the headset

Narration too quiet with levels maxed out

Hi! I'm trying to record narration in Premiere Elements 7 and despite my levels being maxed out, it's still way too quiet. I just purchased a Blue Snowball Ice USB mic. I also tried it with a non-USB mic and got the same result. I also tried recording through Soundbooth CS4 and it sounded the same. I've tried to adjust the levels both through Windows control panel and in the narration recorder window in Premiere but nothing helps. Any ideas?

julieoolie
Thanks for the follow up with the additional details.
From your details, this is not a Premiere Elements issue. Rather it is an issue involving
your computer sound system and equipment.
If you were stuck with a bunch of low volume narration clips from whatever source, you could consider looking at
at the the following which uses the free audio editor Audacity to increase volume (Amplitude)
Audacity tutorial:making the sound track louder, increasingthe Amplitude, or normalizing the volume levels
Audacity: Free Audio Editor and Recorder
Then you export the volume adjusted clips from Audacity (.wav or .mp4) and import them into the Premiere Elements project.
But, the focus would appear to be on the system volume settings for recording and speakers. So, I am not sure if there is any
merit in working with Audacity in a sound flawed system. You could try.
There is a maneuver in Premiere Elements that you could look at when you have the audio clip volume at max 6 dB and the volume is not loud
enough. Make copies of the audio clip and place the copies directly above one another on the audio tracks. Keep stacking them until
you get the increased volume that you want.
Please review and consider and then we decide what next.
Thank you.
ATR

250gb tm drive - maxes out at 7 backups?

Just curious if these ratios sound right, or if there is a preference I don't have set up correctly. I have time machine set to back up my entire internal hard drive rather than select folders like "my documents." I did this so I could restore the whole system using the leopard disk in the event of a catastrophic failure.
I'm not getting many backups before maxing out my 250gb drive. I have an internal drive with 78 gigs of material. I have had my time machine backup drive plugged in each day this week. The time machine backups currently have one backup from 01/14, one backup from 01/15, and 5 from today 01/17. My 250 gig time machine now only has only 36 gigs free. I understand that time machine makes one complete backup and then incremental backups of any changed files (via virtual links). I guess it's doing this because if I had 7 complete file for file backups it would total about 550 gigs, but there haven't been that many changes to my system between backups... Doesn't seem right. Can I really only expect about 7 backups on a 250gig hard drive? Also, is there any way to specify how often it backs up. If I can only expect 7 backups it would be nice to have it do it every other day, rather than using them all in an afternoon... Something doesn't seem right.
Thanks for any insight.

I've had similar issues. I have a 120GB drive backing up 60GB of my 80GB internal drive. I checked my Console and found this error:
Jan 19 19:26:42 eMac /System/Library/CoreServices/backupd[1774]: Backup requested by automatic scheduler
Jan 19 19:26:42 eMac /System/Library/CoreServices/backupd[1774]: Starting standard backup
Jan 19 19:26:43 eMac /System/Library/CoreServices/backupd[1774]: Backing up to: /Volumes/FireWireDrive/Backups.backupdb
Jan 19 19:26:44 eMac /System/Library/CoreServices/backupd[1774]: Event store UUIDs don't match for volume eMac
Jan 19 19:26:44 eMac /System/Library/CoreServices/backupd[1774]: Node requires deep traversal:/ reason:kFSEDBEventFlagMustScanSubDirs|kFSEDBEventFlagReasonEventDBUntrustable|
Jan 19 19:38:31 eMac /System/Library/CoreServices/backupd[1774]: No pre-backup thinning needed: 7.51 GB requested (including padding), 45.38 GB available
Jan 19 19:38:37 eMac /System/Library/CoreServices/backupd[1774]: Error: (-8088) copying /Applications/iPhoto.app/Contents/Frameworks/DotMacKit.framework/Versions/A/Dot MacKit to /Volumes/FireWireDrive/Backups.backupdb/eMac/2008-01-04-200348.inProgress/00CF5 18D-1629-4880-AA45-17D61F3184BF/eMac/Applications/iPhoto.app/Contents/Frameworks /DotMacKit.framework/Versions/A
Jan 19 19:48:31 eMac /System/Library/CoreServices/backupd[1774]: Copied 52 files (45 KB) from volume eMac.
Jan 19 19:48:32 eMac /System/Library/CoreServices/backupd[1774]: Backup canceled.
Can anyone explain what's happening here? Thank you.

Cpu maxed out at all times..

I'm very concerned about my Gnome install. I updated for the first time in a while, and rebooted - just to see how things were. I started X (no issues), and Gnome loaded quickly. The problem is that my CPU is now maxed out for no reason, and it never drops between the 95% mark. Gnome system monitor is reporting 100% usage, but when I check my processes with it, I can't find the culprit. htop shows that X is using 94-100% CPU - something that I find hard to believe.
Here is htop output;
http://img411.imageshack.us/my.php?imag … &via=yfrog
Also;
xorg-apps 7.4-2
xorg-font-utils 7.4-1
xorg-fonts-100dpi 1.0.1-2
xorg-fonts-75dpi 1.0.1-2
xorg-fonts-alias 1.0.1-2
xorg-fonts-encodings 1.0.2-3
xorg-fonts-misc 1.0.0-4
xorg-res-utils 1.0.3-2
xorg-server 1.4.2-2
xorg-server-utils 7.4-4
xorg-twm 1.0.4-3
xorg-utils 7.4-3
xorg-xauth 1.0.3-1
xorg-xinit 1.1.1-1
xorg-xkb-utils 7.4-1
xorg-xsm 1.0.1-2
gnome-applets 2.26.1-1
gnome-audio 2.22.0-1
gnome-control-center 2.26.0-1
gnome-desktop 2.26.1-1
gnome-games 2.26.1-1
gnome-icon-theme 2.26.0-1
gnome-keyring 2.26.1-1
gnome-media 2.26.0-1
gnome-menus 2.26.1-1
gnome-mime-data 2.18.0-3
gnome-mount 0.8-1
gnome-netstatus 2.26.0-1
gnome-nettool 2.26.1-1
gnome-panel 2.26.1-1
gnome-power-manager 2.26.1-1
gnome-python 2.26.1-1
gnome-python-desktop 2.26.0-1
gnome-session 2.26.1-1
gnome-settings-daemon 2.26.1-1
gnome-system-monitor 2.26.1-1
gnome-terminal 2.26.1-1
gnome-themes 2.26.1-1
gnome-utils 2.26.0-1
gnome-vfs 2.24.1-2
gnome-volume-manager 2.24.1-1
libgail-gnome 1.20.1-1
libgnome 2.26.0-2
libgnomecanvas 2.26.0-1
libgnomecups 0.2.3-4
libgnomekbd 2.26.0-1
libgnomeprint 2.18.6-1
libgnomeprintui 2.18.4-1
libgnomeui 2.24.1-1
policykit-gnome 0.9.2-3
Can some one help me fix this? thanks..
* Note: I do use [testing], if that helps.

i would guess that since you're still using xorg-server 1.4, that it probably relates to this problem?
http://bbs.archlinux.org/viewtopic.php?id=69132
and
http://bbs.archlinux.org/viewtopic.php?id=69121

I have not been able to use iTunes for several months. Every time I open iTunes, it freezes by computer such that there is about a minutes between each action. I am running iTunes 11 on Mac OS 10.6.8 and have a computer with maxed out memory.

I have not been able to use iTunes for several months. Every time I open iTunes, it freezes by computer such that there is about a minutes between each action. I am running iTunes 11 on Mac OS 10.6.8 and have a computer with maxed out memory. Help! I can't access my iTunes content.

I have not been able to use iTunes for several months. Every time I open iTunes, it freezes by computer such that there is about a minutes between each action. I am running iTunes 11 on Mac OS 10.6.8 and have a computer with maxed out memory. Help! I can't access my iTunes content.

Maxing out on RAM

Hey
My old powerbook came with 128, I added 512 to start then exchanged that with a 1gig so it was running on 1.128. No problem at all. Spec said max was 640.
I now have the macbook pro 2.16 C2D 15.4 screen. It came with a removable gig ram and I had a gig from my previous MBP. However - I feel 2gig is not enough. This MBP says it can only do 3gig ram. Recent models can do 4. I'm wondering if anyone has maxed out the ram on a 3gig version and run it on 4.
I'm thinking of pullng out both 1gigs and sticking 2x2gig in it. Just want to make sure it is possible.
Appreciate any help.

Hi,
one benefit of 2x2GB is that you still have the 'pairing' advantage of some small percentage more speed when the memory is accessed.
And secondly, if you decide to get a Santa Rosa MBP in the future you can use this memory for it.
Other than that, you are right, not much use.
Have Fun
Stefan

Volume maxed out

Similar Messages

Maybe you are looking for