Volume not high enough

I looked at the other posts regarding volume levels on the iPhone 4 but I don't see anything that applied to my issue, or offered a suggestion that I could try.
Using the phone in hand-held mode the volume on the phone is okay, not as loud as I'd like but it's doable. However, the issue I do have is when I'm in the car and I plug the phone into a Griffin hands-free kit. The phone sits in a charging cradle and the unit plugs into the cigarette lighter plug. There is a cord to plug into the Aux port on the radio, and the other end of that cord goes into the headset jack. That end of the cord also has a mic. The unit works fine as far as people hearing me. The problem is I can barely hear them. I set the volume control to max but still no help.
Anyone have any suggestions?

I set the volume control to max but still no help.
I assume you mean the iPhone volume. I have to ask the obvious... turn your radio volume up?

Similar Messages

  • N900 in coming call volume not loud enough

    N900 in coming call volume not loud enough
    Can any one help please
    When some one calls me i can just about hear them.
    I have looked in phone settings etc but cant find where i can turn it up.
    i know you have a volume control when a call is taking place and is right up but dont think it is that.
    any help would be grate thanks.

    I am having similar problems with my phone, mostly just when using the earphones/mic that came with the phone. Don't have any solutions yet, just wanted you to know there are others having similar problems.

  • First time user of Mac(Book Air) and mouse sensitivity not high enough

    First time user of Mac(Book Air) and one thing that has bothered me is when I use a generic USB mouse and I've set the tracking speed/sensitivity to the max and it's still not high enough and it just irritates me to no ends. Am I not doing something properly being a first time mac user? Thanks in advance for any response.

    Depends on the mouse.  "Laser" with shorter wavelengths are far too sensitive for me and need to be dialed down.  IR is worthless in my opinion because they cannot move properly across a black/white checkerboard.
    I actually (to my great surprise) love using the trackpad and hate to use the mouse because trackpad keeps my thumbs directly between my hands while typing.  But that is just me.

  • Volume - Not loud enough.

    My husband and I would like to listen/watch videos without headphones, however, the maximum volume is not loud enough for us to understand some words. Is there a way of increasing the maximum volume output without the use of external speakers or headphones?
    Thanks.

    Open iTunes on your computer---Podcast--->
    Pick the Podcast you want to raise the volume--->
    Press the keys...Command+i--->
    Press the Option tab--->
    Check the box Volume Adjustment...Set the volume to your liking.
    or set it to 100%
    If you want to do all the podcast at one time. Choose all the podcasts at one-time. You can do the same with movies and music too. If you want to adjust the volume to a select few in you library, Seclect All--->Option key and click on the podcasts (video, music) that you want to deselect.

  • Lowest volume not low enough

    Has anyone else noticed that the lowest volume for listening to music with earbuds is not low enough?  I want the ability to turn it down one or two steps quieter but it will only go OFF from the lowest level.  
    I was hoping the main volume setting was a master setting but it seems to be the exact same effect as using the control buttons on the side.  The master volume is set all the way over to the left (less one step).  I do not have earbuds with their own volume setting so at the mercy of the BB controls (either on the side or on the screen).
    Are there any other ideas?
    Solved!
    Go to Solution.

    You have done all that can be done.  The voulme levels you speak of is by design.  I'm sorry, there isn't anything I can think of that can be done currently.  Maybe send a suggestion to @BlackBerryHelp on twitter. 
    Please click the Thumbs Up icon if this comment has helped you!
    If your issue is resolved, please click the solution button on the resolution!
    Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

  • Volume is not high enough on my Nano

    I bought my first Ipod Nano 3rd Generation 3 years ago in USA. Everything went perfect, Im fine with volume, capacity, everything is fine.
    But now I got the new Ipod Nano 6th Generation in The Czech Republic/Europe.
    I needed a bigger capacity and so far 8Gb is enough for me but Im confused. The problem is the VOLUME IS SO QUIET ! Even on the "highest" its still not enough loud for me. Even when the volume limit is "the highest" (off).
    Well I read some forums, it might be because of some kind of "European Volume Regulation Law". I really dont know what else to do.
    I also read there might be some programs for these Ipod where you can boost your Ipod volume to the maximum, I mean actually, over the maximum. But so far they are probably not updated for these new 6th Generation Ipod Nanos.
    Any ideas? I feel miserable

    carl wolf - are there any forums or special sites for these 3rd party apps so I can keep up with updates? btw thats what i thought
    _Roisin_ - no, its the "czech" ipod itself... no change of settings.

  • IPad speaker volume not loud enough

    It seems to me that my iPad (latest model / software as of this date) speaker volume could be louder.  Other family members have the new Mini's and they have much more volume, as do our iPhones.  Is there a way to increase or improve the speaker volume on the iPad?
    Thanks!

    I have yet to receive my ipad 2 yet, but I'm sure the physical design of the case has something to do with it.
    The ipad 1 emits to the side, where as ipad 2 emits toward the back. Movies have a very dynamic volume range compared to music, and I've found even on the ipad 1 that the volume could be louder, especially if there's existing ambient noise.
    If I didn't have my earbuds, I would cup the speaker with my hand to direct the sound foward... not sure how well that would work with the ipad 2.

  • I cannot turn the volume up high enough on my iPhone 5 to hear.  Also, when speaking to someone else, they cannot hear me unless I reposition the phone to speak directly into it.

    I was speaking to someone on another iPhone in a quiet office and we could not hear each other.  Is this being caused by the new ANR technology?  Is all the advertisement on TV intended to get in front of this problem?  It seems that Apple has focused on all of this gee wiz stuff, and they forgot what phones are supposed to do.  If I don't get a fix, I'm going back to android.

    Hi Friend,
    Be sure you did not turn no Restrictions before (Settings>>General>>Restrictions)
    Not to be a jerk, but did you make sure there is nothing covering the phone speaker? If you leave the protective cover over the phone speaker you won't be able to hear much at all.
    If the problem persists, rebooth your device (press and hold home and sleep button simultaneally Unitol turn off and appears the Apple Logo.
    Hope it helps

  • Print PDF Pages quality not high enough

    I'm pretty happy with using Aperture to design relatively simple photo books. Its great to stay in one tool. But I'm not happy with how it exports JPGs from the book I designed. Don't think its a problem with my automator workflow file either.  I'm using a custom 10x10" theme and sending JPG's to Black River Imaging for book publishing, I'm not using Apple's books, so I have to get my designed book into JPGs, somewhow.  So I modified the print pdf to jpg folder automator script to bump to 300 dpi, RGB, using the sRGB color space and a "best" quality.  The pixel counts are coming out correct, ditto for color space, but the file size is too small and the sharpness just isn't there in the files.
    I did an experiment where I exported the individual JPG images for a book page and brought them into Photoshop. Resized the images based on where they went into the page layout and re-implemented the page layout in Photoshop, saving as JPG-12 optimized. Results?
    Aperture - 733 KB for a 10x10 300 dpi page
    Photosho - 2.1MB, and yes, viewed at 100% obvious differences to detail.
    Its a bummer. Making the photo books within Aperture is much, much easier. But I'm not happy with the "print PDF to JPG pages" flow.
    Do I have any way of fixing this?

    Screen capture of my Automator script.  Notice I'm asking for 300 dpi.  I'm getting 72.  However, instead of 10" as I expect, I get 42.3", and this still equals the correct 3,000 pixels per side, so that is good.  But why?  And if that is messing up can I be sure I can trust the compression setting?
    Image file at http://mercphoto.exposuremanager.com/scripts/expman.pl?rm=view_photo&photo_id=jp g-automator_13_2&dir=galleries/13/2&file=jpg-automator_full.jpg

  • Volume Not Low Enough

    Yes you read that right. My previous iPod was the Mini. I tend to listen to my iPod at night(it helps me fall asleep) with in-ear earbuds.
    With my old Mini I would set it as low as it would go before it was muted. The problem with the Classic is that while the Mini's lowest setting was Mute, the classic won't mute when I turn it all the way down. Is this a feature, or some setting is not configured?

    You have done all that can be done.  The voulme levels you speak of is by design.  I'm sorry, there isn't anything I can think of that can be done currently.  Maybe send a suggestion to @BlackBerryHelp on twitter. 
    Please click the Thumbs Up icon if this comment has helped you!
    If your issue is resolved, please click the solution button on the resolution!
    Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

  • Yahoo mail ,using ff shows resolutions not high enough but works withchrome

    When I log into Yahoo mail I get a popup stating my computer resolutions are too low. Nothing has changed. I can log in OK using Chrome.or Google on this same computer.

    Hmm, maybe... Firefox changes the resolution reported to websites based on your zoom level. Could you try reducing your zoom a notch (hold down the Ctrl key and tap the - key) to see whether that makes a difference? When you reload the Yahoo page, use Crl+Shift+r to force a full reload and bypass any cached files.

  • Call volume not loud enough!

    When I make/answer calls, I can barely hear the other end, only when im in a quiet room is it perfectly clear...also when i am listening to the ipod part, when a call comes through I realllllly cant hear the caller. is there a setting I can adjust? Or is it my phone thats acting up? I just got it last week!

    I am having similar problems with my phone, mostly just when using the earphones/mic that came with the phone. Don't have any solutions yet, just wanted you to know there are others having similar problems.

  • What can be wrong with my iPhone 4?  There is no sound from incoming calls, SMS and even when I play music.  I already checked that it's not muted, volume is high and not set to "vibrate mode."

    What can be wrong with my iPhone 4s.  There is no sound from incoming calls and SMS even when I try to play music.
    I already checked that it is not muted, volume is high and not in " vibrate mode."

    What can be wrong with my iPhone 4s.  There is no sound from incoming calls and SMS even when I try to play music.
    I already checked that it is not muted, volume is high and not in " vibrate mode."

  • I have a 4s with ios 6 but when I place a call I can't hear the person I' m calling, the volume is high but it's not working. Please help.

    I have a 4s with ios 6 but when I place a call I can't hear the person I' m calling, the volume is high but it's not working. Please help.

    I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.

  • My note book volume not enough. what can i do give me a sollution.

    my note book volume not enough. what can i do give me a sollution

    Hi,
    One thing can help is the following.  Right click the speaker icon in the Taskbar and select 'Playback Devices'.  Left click the default device once to highlight it ( it's usually 'speakers & headphones' ) then click the Properties button.  Click the Enhancements tab and put a tick in the box next to 'Loudness Equalization'.  Click Apply to save the change and then click OK in all remaining windows and see if this has helped at all.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

Maybe you are looking for

  • Jsp - calling a method form an HTML form inside a jsp

    Good mornig everybody, Does anybody know how to call a Java Method (a public method of a Class) form an Html form that stay in a jsp page. I'd like to do something like that in myPage.jsp <% // Declaration of object MyObject obj = new MyObject(); %>

  • FB: best way to extract CSS from a project created in Catalyst

    I'm posting this on behalf of a question on the Catalyst forum (http://forums.adobe.com/message/2324233#2324233): Once I import a Catalyst project into FB, what's the best way to go about extracting CSS from it so that all the styles aren't inline?

  • Simple features wish list

    Please allow the reading and writing of text files as a standard feature vs having third party software to do so.  In the file manager, please use the default interface for playing music instead of the video player. Same for pictures. Please allow ch

  • Cannot log in after security update

    I'm running 10.4.11. After installing the most recent security update, iChat has started acting like I had never used it before and needs to be configured. It walks me through the configuration process, but when I click "done" it crashes. When you tr

  • "Connection reset by peer"   Help Me

    Hi I have j2re1.4.2_08 and Oracle 9.2 When I tried to update database with huge data I got following exception: java.sql.SQLException: Io exception: Connection reset by peer: socket write error at oracle.jdbc.dbaccess.DBError.throwSqlException(DBErro