Volume not working

The volume is on high on my computer but no sound will come from my computer. I've checked everything and there's stil no sound. Any help would be appreciated. Thanks!

Hello AkioBurns!
Have you already checked the Preferences > Sound > Output > "Internal Speakers (Built in)"?
marek

Similar Messages

MacBook Air osx 10.7.5 ... volume not working on some internet videos or songs,

MacBook Air osx 10.7.5 ... volume not working on some internet videos or songs, on items used before (3wks ago) it has always worked

Is there a volume icon at the bottom of the video window when you move the mouse pointer over to bottom
of the window?

The volume not working on my iphone 4s

The volume not working on my iphone 4s

I had the same problem as well for nearly 3 months.
I had tried bring the Iphone into my phone carrier and they sent me to the AppleStore. When I brought it to them they hooked it up to the diagnostic machine and they told me just to restart the Iphone from the factory settings.
This didn't work either. To complicate things more, other "solutions" seem to only yield temporary success. These temporary solutions included: blowing compressed air into every port, various restart combinations, various factory restore methods.
I had nearly given up until I stumbled upon a support post on Apple's website that finally yielded success.
http://support.apple.com/kb/TS1630
The solution for me is listed as line 7, which reads:
"Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris."
Apparently, this cylinder shaped, mesh area is in some way tied to what triggers the headphones/speaker selection. I am not sure how, but I can say that after gently brushing it out my sounds are working again; specifically my music is now able to play directly off the speakers and my Iphone apps all play their sounds agian.
Hope this helps you as well!

My ipad2 media volume not working, volume bar not showing

My ipad2 media volume not working, volume bar not showing

here are my similar symptons:
in Settings the volume slider bar when moved plays a sound out of the speaker
when you double press home button, and slide over to the brightness and volume slider bars, the volume slider is completely gone.
when you plug in headphones it works fine, volume rocker controls volume perfectly.
when you press volume rocker without headphones, nothing happens, or a blank "sound effects" icon displays.
I sent my Ipad2 to Apple for this under warranty. They said there are some small scratches on the side of it.
It lives in a heavy duty case, but the exposed area has been knicked some how. The little divots in the metal on the side mean that "impact" must have broken it.
Forget the fact that it spontaneously started happening and that the speakers and headphones both work at various times, and the volume rocker works, but iOS 5.1.1 apps can't send sound out the speaker, but the volume settings in the sound do send out sound..
so they refused to look at it or repair it under the warranty. I was a day away from buying yet another apply device in our family that already has a couple iPod Touches and 2 iPads. I think I'll buy a droid now.

Personal hotspot missing and music volume not working and lots of other problem after updated 4s to ios8 ? Apple disappointed this time badly.

Personal hotspot missing and music volume not working and lots of other problem after updated 4s to ios8 ? Apple disappointed this time badly.

GO to Setting > Cellar Data > VPN Settings > Add any user and password under Personal Hotspot, then you will see it's activated again as usual

Ipad Volume not working on IOS 6.1.3

After updating my Ipad 2 to IOS 6.1.3 volume is not working at all, i set it up and inmediatly goes down. Already tried the home left control, and also the lock side switch to lock and not to mute.
any idea how to solve it.. I have nos sound at all

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
 Cheers, Tom

Volume not working, it just stopped on my iPhone 4S

My volume just stopped working. Text tones, music, videos do not play. When I attempt to adjust the volume w the side buttons, there is not a bar that increases or decreases on my display. But The ringer works. I've reset my phone thru settings and looked for lint in the headphones and in the USB, still not working. Help please!

Hey, I had the exact same problem, was quite annoying. It's actually an easy fix, take a toothbrush and gently scrape out all the dust from the charge port and the headphone port. Also blow into it real hard a few times then restart it. Worked like a charm for me! You may have to try the toothbrush trick a few times...good luck!

Volume not working - most of the time

I have a HP Pavilion g6-2210sa, product number is C6S45EA#ABU Volume occasionally works fine, but mostly does not. It sometimes works when I turn laptop on and then after a few minutes it doesn't work. If I restart, it sometimes starts working again but mostly does not. I have followed HP instructions for audio problems on this website however I cannot seem to fix this. Please help urgently. Thanks
This question was solved.
View Solution.

Hi,
Try the following.
Open windows Control Panel, open Windows Update, select 'View update history' in the left hand pane and then select 'Installed updates' link in the following window.
Locate update KB2962407, right click it and select Uninstall. When done, restart the notebook, open windows Control Panel, open Windows Update and select 'Check for updates'. You'll see the update you just uninstalled being offered again - right click and select 'Hide Update'.
After this you may or may not need to delete and reload the Audio driver - if you do, the procedure for using recovery manager to reinstall Software and Drivers is detailed in the document on the link below.
Recovery Manager - Windows 8.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Why does my volume not work

A couple of days ago my phone volume stop working. When I call it works fine, everything doesn't work. I tried to restore my phone but it didn't work and then I disabled my restrictions but nothing changed. I do not know what to do.

Is it your volume buttons that don't work or just the sound? If its your volume buttons, then that's a hardware problem. If its the sound, check to see if your phone is on mute by double tapping the home button and swiping to the right.

Why do volumes not work in some of my iPad apps?

Some app volumes do not work . Why?

Apps for a mobile device will not work on other devices because the operating system is different.
when you say, "won't accept user name and password", please be more specific or give example as I'm not sure what you mean.
what app or account ?

Why does my volume not work out loud?

Um I'm not sure why my volume is not working anymore. Like sometimes it works and others it doesn't. Then I plug my headphones in nd it works when it wants to. But majority of the time it doesn't work... What's up with that?!?

I solved this problem by shutting down my ipad completely with the switch button. And then held down the Home button for about 60 seconds. I switched my ipad back on and Voila! My sound was restored to normal. But I've not tried to use it with a headset and see if the problem occurs again. Best to you all!

Why is my volume not working anymore it goes out

my volume is not working on my phone

Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Mount volume not working in 10.4.6

Could someone please explain why this script does not work in 10.4.6?
tell application "Finder"
activate
mount volume "afp://192.168.1.100/thesharetomount"
end tell
Works fine in 10.3.9 but 10.4.6 gives error "some object was not found"
Thanks for any info

Managed to figure out a trick to get around this problem.
I added user name to the mount command
tell application "System Events"
set myuser to get full name of current user
end tell
tell application "Finder"
activate
mount volume "afp://" & myuser & ":@192.168.1.100/sharetomount"
end tell
Now it works but can't figure out why it does not without giving a user name?

Bluetooth volume not working after last firmware update

After the latest firmware update I'm not able to adjust the volume. Both when i use the volume rockers on the side, or try it via settings, the indicator shows changeing volume - but there are no difference. VERY ANOYING!
any solution planned for att this issue?
Edit; just notice that the bluetooth volume is working on headset but not on devices with only media playback. (Working with SBH20 but not with AV-receiver or bluetooth speaker)

I can confirm that my Z2 bluetooth volume control stops working when i use it with my logitech bluetooth speaker.
Bluetooth volume control does not work when I use Spotify, TuneIn Radio Pro, SoundCloud or Walkman. However the seemingly same bluetooth volume control works when I use Poweramp.
At first I tought that the problem was related to streaming music but since the Walkman bt sound volume does not work on local media files it is not the case.
The bluetooth volume control works with my Nexus 7 and Lumia 1020.
Does anyone have heard from Sony regarding this issue?

Iphone 4s volume not working

well its been around 2 weeks already and my phone will not make any sound. the volume buttons work perfect but no sounds comes out. if i connect a headast or headphones it will work but other then that it doesnt. any help?

Hi. I have the same problem. When I saw your question I tried the headphones and it worked but not without.... The volumebuttoms does not work for me, but I can change the volume in the settings..The ringsignal does work, the smssignal, not...
Hope we got some answers oour questions.. I have my question a few minutes before yours.
//Pluttan

IPod Nano - volume not working

My 3rd generation Ipod Nano's volume stopped working after a software update. I have tried the 5 Rs: Reset, Retry, Restart, Reinstall, Restore
1. I checked the head-phones
2. I tried resetting my iPod.
3. I removed and reinstalled itunes to my computer.
4. I finally restored my Ipod Nano to it's original settings and the volume still does not work.
Thank you in advance for your assistance.

Try restarting your device. If that doesn't work, take it to an Apple store. If it is less than a year old and just stopped working, they will replace it for free (be sure to back it up to iTunes first). If you dropped it, you will have to pay because Apple will not replace a device due to "Human Error." If it is more than a year old, you will either have to pay to get it fixed, or have to pay to get it replaced.

Volume not working

Similar Messages

Maybe you are looking for