Volume on media playback
I am not sure if this is an issue on my phone or normal behavior, but I feel like the volume of the media being played back through the headphone jack is too low, even at maximum setting. I tried a few different headphones (includinig the motorolla branded ones that came with my Razr as a promo) and a few different apps (podkicker and doubletwist). Still even at max volume, when i am walking down the street, a bus driving by drowns out whatever I am listening to. Anybody else have this issue?
I'm using two 27" imacs and one of them is still on 10.6.8 one has been upgraded to Lion just now.
I thought it was the Lion update which caused this issue for me because I installed 10.6.8 on both of them today as well.
Now I can't adjust the brightness in target display mode on either 27" imac.... worse that that it sets it to full brightness too.
I don't know of I want to try to go back to before 10.6.8 with time machine, talk about gutted ?
can you use monitor calibration as a work around ?
I found TS3919 but it doesn't work BTW , it says to set the brigthness before entering target display mode..
Simon
Similar Messages
-
How To Change Mouse Cursor Icon To Hand And Click Middle Of Player To Pause In Strobe Media Playback
Hello,
Thank you for providing a platform where uses can pose questions to Adobe employees. This certainly helps us all cut right through it.
Similar to YouTube's player (as well as many others), I was wondering if it is currently possible for users to enable functionality on Strobe Media Playback to change the mouse cursor to a hand/point cursor upon hovering over Strobe Media Playback's buttons (such as pause, the volume controls and that initial large centered middle play button),
And, whether or not it is currently possible to enable functionality to pause/play videos merely by clicking the middle of the video screen (within the normal view mode as well as the full screen mode). Again, with YouTube, Vimeo, JW Player, and many others, such functionality is currently built-in by default.
I look forward to any advice you are able to provide. Thanks again for providing this discussion platform for users.
- C.R.Hi, thank you for your suggestions and for the interest in our player.
The full area click issue is an older one, tracked at http://bugs.adobe.com/jira/browse/ST-156 . Unfortunately, it will not be fixed in this release.
The hand cursor issue is now tracked at http://bugs.adobe.com/jira/browse/ST-331 - thanks for suggesting it! -
How to Create a new plugin in Strobe Media PlayBack?
Hai
i want to create a plugin for swf,and added into the Strobe media Playback.i follow this link:http://osmf.org/dev/osmf/OtherPDFs/osmf_plugin_dev_guide.pdf
But my plugin is Not Loaded ,i dunno wats the reason.Anybody kindly Help me,am new for creating a plugin.
Thanks in advance!
swfPlugin.as
package
import flash.display.Sprite;
import com.realeyes.osmf.plugin.swfPluginInfo;
public class swfPlugin extends Sprite
public function swfPlugin()
super();
_pluginInfo = new swfPluginInfo();
// OSMF will invoke this getter to retrieve the plug-in's
// PluginInfo object.
public function get pluginInfo():swfPluginInfo
return _pluginInfo;
private var _pluginInfo:swfPluginInfo;
swfPluginInfo.as
package com.realeyes.osmf.plugin
import org.osmf.media.PluginInfo;
import org.osmf.media.MediaElement;
import org.osmf.media.MediaResourceBase;
import org.osmf.media.MediaFactoryItem;
import org.osmf.media.URLResource;
import org.osmf.elements.VideoElement;
public class swfPluginInfo extends PluginInfo
public function swfPluginInfo()
var items:Vector.<MediaFactoryItem> = new Vector.<MediaFactoryItem>();
// Create the MediaFactoryItem and add to our list of items.
var item:MediaFactoryItem = new MediaFactoryItem
( "com.realeyes.osmf.plugins.WatermarkPlugin"
, canHandleResourceFunction
, mediaElementCreationFunction
items.push(item);
// Pass the list to the base class.
super(items);
private function canHandleResourceFunction(resource:MediaResourceBase):Boolean
var result:MediaElement;
// Only return true if the resource is an URLResource...
var urlResource:URLResource = new URLResource("http://vm2.gloriatech.in/android/load6.swf");
// ... and if the URL starts with "rtmp".
return result = urlResource as MediaElement;
private function mediaElementCreationFunction():MediaElement
return new VideoElement();Hai
i want to create a plugin for swf,and added into the Strobe media Playback.i follow this link:http://osmf.org/dev/osmf/OtherPDFs/osmf_plugin_dev_guide.pdf
But my plugin is Not Loaded ,i dunno wats the reason.Anybody kindly Help me,am new for creating a plugin.
Thanks in advance!
swfPlugin.as
package
import flash.display.Sprite;
import com.realeyes.osmf.plugin.swfPluginInfo;
public class swfPlugin extends Sprite
public function swfPlugin()
super();
_pluginInfo = new swfPluginInfo();
// OSMF will invoke this getter to retrieve the plug-in's
// PluginInfo object.
public function get pluginInfo():swfPluginInfo
return _pluginInfo;
private var _pluginInfo:swfPluginInfo;
swfPluginInfo.as
package com.realeyes.osmf.plugin
import org.osmf.media.PluginInfo;
import org.osmf.media.MediaElement;
import org.osmf.media.MediaResourceBase;
import org.osmf.media.MediaFactoryItem;
import org.osmf.media.URLResource;
import org.osmf.elements.VideoElement;
public class swfPluginInfo extends PluginInfo
public function swfPluginInfo()
var items:Vector.<MediaFactoryItem> = new Vector.<MediaFactoryItem>();
// Create the MediaFactoryItem and add to our list of items.
var item:MediaFactoryItem = new MediaFactoryItem
( "com.realeyes.osmf.plugins.WatermarkPlugin"
, canHandleResourceFunction
, mediaElementCreationFunction
items.push(item);
// Pass the list to the base class.
super(items);
private function canHandleResourceFunction(resource:MediaResourceBase):Boolean
var result:MediaElement;
// Only return true if the resource is an URLResource...
var urlResource:URLResource = new URLResource("http://vm2.gloriatech.in/android/load6.swf");
// ... and if the URL starts with "rtmp".
return result = urlResource as MediaElement;
private function mediaElementCreationFunction():MediaElement
return new VideoElement(); -
Higher volume for video playback?
Hello everyone!
I am new to the boards and to the touchpad. I have a question about adjusting the volume in video playback. I woudl like to know while during the conversion process, are there any converters out there that can boost the volume? I have been playing with Movavi, AVS, and Cucusoft. I am converting an AVI to MPEG-4 or Ipad format, whichever is on the menu. When I transfer the converted file, the video looks great and the audio plays back. However, the volume to me is not high enough. I have also used my headphones and it still does not play as loud as my iphone 4 and they are basically the same file and format. I bought this because of the price and I am going on vacation later this year and I want to use it on the plane so that is why I am having the volume issue. To me it seems it wont be loud enough on the plane. Is there anything I am missing? I have also tried to upgrade to the latest OS version but the TP is always coming back with the unable to connect message. I am still working on that. I cant get the web doctor to work but that is another thread.
Thanks very much
Post relates to: HP TouchPad (WiFi)Ok, I think I have mastered how to convert my movies to play on the TP with no issues. However, I need to somehow increase the volume level of the converted movie. I have already installed the preware option that increases the internal volume levels, but some of the movies I have converted seem a little low for my taste. I have been trying trial versions of several video converters such as DVD fab, Xilisoft, Cucusoft and others but I like Handbrake's track record and it's free!
What I would like to know is if there is a volume setting in Handbrake? If not does anyone know a way to increase the volume levels when you convert movies any other way?
Thanks very much.
Post relates to: HP TouchPad (WiFi) -
How to video via email using flash media playback setup?
How I can send video via email? I send every week an email that contain a link to WMV file on our website. I am trying to send the same thing using flash media player. Here the html generated via flash media playback setup and will not display in an email. Any advise
<object width="400" height="400"> <param name="movie" value="http://fpdownload.adobe.com/strobe/FlashMediaPlayback.swf"></param><param name="flashvars" value="src=http%3A%2F%2Fwww.4GodIsLove.com%2F%2FTV%2FFlash%2FLydua_Fares_Elhaana.flv"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://fpdownload.adobe.com/strobe/FlashMediaPlayback.swf" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="400" height="400" flashvars="src=http%3A%2F%2Fwww.4GodIsLove.com%2F%2FTV%2FFlash%2FLydua_Fares_Elhaana.flv"></embed></object>salma_salma wrote:
Thanks Janaki but how can I add a new application? I tried to do it using Flash Media Administration Console but it doesn't work
Hi Salma,
To add an application to FMS follow the below steps
1. Create a folder "my_app" under "$InstallRoot\applications" directory.
2. For simple server side code... add "main.asc" file inside "$InstallRoot\applications\my_app" directory which has the content like
application.onConnect = function(clientObj){
trace('onConnect function");
return true;
3. To add streams to the application, creates 'streams' folder inside "$InstallRoot\applications\my_app" directory, within that create '_definst_' folder and then place your FMS supported streams within the directory. So your streams for the 'my_app' application will be at "$InstallRoot\applications\my_app\streams\_definst_\mystream.flv".
You can connect to this application using the url "rtmp://your_server_name/my_app". To play the stream mystream.flv using video player, use the url "rtmp://your_server_name/my_app/mystream.flv".
Regards,
Janaki L -
Strobe Media Playback, basic code not working with FLV file?
I am trying to use the following code with Strobe Media Playback swf 1.5:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" lang="en" xml:lang="en">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title> </title>
<script type="text/javascript" src="scripts/swfobject.js"></script>
<script type="text/javascript">
var flashvars = {};
flashvars.src = "song.flv";
flashvars.poster = "preview.jpg";
var params = {};
params.movie = "StrobeMediaPlayback.swf";
params.allowfullscreen = "false";
params.allowscriptaccess = "always";
var attributes = {};
// Embed the player SWF:
swfobject.embedSWF
( "StrobeMediaPlayback.swf" //swf file name
, "videoDiv" // targeted div
, "652", "366" // width, height
, "10.1.0" // Flash version
, "scripts/expressInstall.swf" //location of expressinstall script
, flashvars
, params
, attributes
</script></head>
<body>
<div id="videoDiv">
<video controls="controls" poster="preview.jpg" width="652" height="366">
<source src="song.flv" type="video/flv" />
<source src="song.ogg" type="video/ogg" />
</video>
</div>
</body>
</html>
However, the page is saying:
We are having problems with playback. We apologize for the inconvenience.
My links do not appear to be broken, I have checked them with Firebug / View Source. Has the javascript changed for Strobe 1.5?Okay, I think I have it *partly* figured out. If I use the link from the example it works:
http://players.edgesuite.net/videos/big_buck_bunny/bbb_448x252.mp4
Does the video have to be online for it to work? -
No audio streaming RTMP from Red5 to Flash Media Playback
I am streaming RTMP from a Red5 server and viewing with Flash Media Playback. The video is fine but there is no audio. The audio from the same stream comes through when I try playing it with the FlashRTMPPlayer Demo that is included with Wowza so I know that the audio is in the stream. Is there any debugging information I can look for or any other configuration settings I need to try?
Any help would be appreciated.I am streaming RTMP from a Red5 server and viewing with Flash Media Playback. The video is fine but there is no audio. The audio from the same stream comes through when I try playing it with the FlashRTMPPlayer Demo that is included with Wowza so I know that the audio is in the stream. Is there any debugging information I can look for or any other configuration settings I need to try?
Any help would be appreciated. -
I need to download flash media playback but I can't find the download button.
I need to download flash media playback but I can't find the download button.
Such behavior can be an indication that you are infected.<br />
In such a case you can use another computer to download the program and save the file to an USB stick.<br />
Be sure to download the latest databases.
You can try an online anti-virus scanner.
* http://www.google.com/search?q=Online%20Antivirus%20Scanner
* http://housecall.trendmicro.com/ HouseCall - Free Online Virus Scan - Trend Micro USA
* http://vms.drweb.com/online/?lng=en Dr.Web - innovation IT-security solutions. Complex protection against Internet threats.
* http://www.eset.com/onlinescan/ - Free ESET Online Antivirus Scanner -
Flash Media Playback Utility download broken
The Flash Media Playback tool is advertised here: http://www.adobe.com/products/flash-media-playback.html But the download link has been hijacked to go to an open source download site that has nothing to do with the Flash Media Playback utility. How can I get the Flash Media Playback tool?
Sorry, I do not know Flash Media Playback, so I cannot help you.
You may try to post at http://forums.adobe.com/community/flash/flash-media-playback but there seems to be almost no activity there. -
I am using strobe media playback but i am not able to add new button for subtitle in control bar.
I have imported assets.fla file in Flash professional but i do not understand how add new button in this fla and then link with action script method to show subtitle.If anybody know about it please tell me.Hi,
Yes you can add video subtitle and I can give you the details how to do
that. Can you please advise which type of files you have for video
subtitile and how many language you want to add. i.e. text files or xml
files.
Best regards,
Sunil Kumar
On Thu, Jan 15, 2015 at 5:22 PM, Add Subtitles to OSMF and < -
Can't seem to stream (RTMP) an FLV file in Flash Media Playback from the Amazon Cloud
I seem to be having trouble streaming any FLV file using RTMP from the Amazon Cloud. Other file formats (i.e., MP4, F4V) seem to work just fine.
I tried using your Flash Media Playback demo page and still had the same problem:
http://www.osmf.org/configurator/fmp/
Without publicly displaying the actual connection path here, this is what I am using for the Video Source (URL):
rtmp://xxxxxxxxxxxxxx.cloudfront.net/cfx/st/_definst_/MyVideo.flv
If I change the "MyVideo.flv" to "mp4:MyVideo.f4v", for example, then it works. But when I try to reference any FLV file that I have located on the Amazon Cloud then it just shows continuous buffering.
The FLV files that I am trying to use with both the Strobe and Flash Media Playback(s) all stream just fine when I connect to them via other Flash based applications/players that I have.
Do you have any suggestions?
Thank you very much.Hello,
The link to the previous post does not seem to apply or help in this case. Please let me know if I am wrong.
I am merely trying to stream any FLV file using your Flash Media Playback demo page. What am I missing here?
Thanks again. -
Flash Media Playback configurator swf file size
Hello,
I just start using the Flash Media Playback configurator : http://www.osmf.org/configurator/fmp/ and I am very surprised that the size of the swf file is less than 2KB. The swf file used is http://fpdownload.adobe.com/strobe/FlashMediaPlayback.swf
How did you compile it to make it so small ? It is based on OSMF ?
Usually the swf file's size of a flash video player based on OSMF seems to be greater. For example the swf file used on page http://www.osmf.org/ (http://www.osmf.org/strobe1_0/StrobeMediaPlayback.swf) is about 193KB or on page http://osmf.org/dev/1.6gm/setup.html (http://osmf.org/dev/1.6gm/StrobeMediaPlayback.swf) is about 422KB.
Thanks in advance.
ThomasHi,
Thanks for the quick reply Gelu. I emptied the cache of my web browser and had a look at all http requests (with Charles proxy and Firebug) sent when loading the page http://www.osmf.org/configurator/fmp/. The only .swf loaded I can see is http://fpdownload.adobe.com/strobe/FlashMediaPlayback.swf.
Is there another cache involved ?
Thanks,
Thomas -
Online Code Walk-Through Wednesday on How To Build an OSMF Player Strobe Media Playback
Wednesday November 17 at 12:00 noon PDT the OSMF User Group is hosting an online code walk-through of the open source Strobe Media Playback video player codebase.
The code walk-through will be lead by Andrian Cucu who is Adobe's Project Leader on the Flash and Strobe Media Playback video player project.
To join, just go to the following link at the meeting time to join the OSMF User Group's Connect room:
http://experts.na3.acrobat.com/osmf/
For further details and to RSVP see the following link:
http://osmf.groups.adobe.com/index.cfm?event=post.display&postid=30846
** ALL ARE WELCOME! **
** PLEASE FORWARD THIS MEETING NOTICE TO ALL WHO YOU THINK MAY BE INTERESTED! **The player supports both standard and advanced delivery methods, including progressive download, RTMP streaming,
RTMP dynamic streaming, HTTP streaming, HTTP dynamic streaming, and live streaming. Flash Media Playback
1.5 and Strobe Media Playback 1.5 also provide support for RTMFP multicast content delivery.
While RTMP(x) streaming are FMS content delivery technologies, the player can also be used with other FMS compatible streaming servers, such as Wowza or Red5.
In the case you do not need the use of FMS streaming functionality, progressive download is always an alternative (what this means is that all you need is a video that can be served by a webserver like apache, nginx, lightypd, etc).
As for how the player can be used, these links are allways a good place to start and get a better idea of what it is all about:
http://www.osmf.org/strobe_mediaplayback.html
http://blog.theflashblog.com/?p=2087
Hope this helps. -
How to stream with the player strobe media playback videos using http dynamic streaming?
Hi..
please could i have some help about the player strobe media playback?
i would like to know how to stream with the player strobe media playback videos using http dynamic streaming.
I have already installed the server,i put my own video in the video on demand folder.i downloaded the player but i don't know how to stream that video with the adobe protocol dynamic streaming.http://osmf.org/configurator/fmp/
Use this configurator, and use the same code it generates with your strobemediaplayback.swf
Also make sure the domain where strobemediaplayback.swf is being called from and resides, is in your /webroot/crossdomain.xml file, or it will not work. -
Flash Media Playback Setup page
Hello,
I have spent hours trying to figure out how to configure the OSMF files to create an Adobe Media Playback Setup page (similar to the one that use to be live).
Any help would be great appreciated.
Thanks!You will likely get better program help in a program forum
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll
Maybe you are looking for
-
Hi everybody. I have a MacBook that's about five years old. I want to buy the newest operating system so that it runs better (because currently it is struggling), however I would like to clean up all the old software before I do that. I want it to be
-
Cannot add bootcamp partition to my new HD in MacBook Pro (4,1)!!
Hi Folks, I used to be able to add a partition to my boot drive from either BootCamp or Disk Utility but since I've installed my new HD, Bootcamp Asst informs me that my software is not up-to-date and Disk Utility has the options greyed out!! Anyone
-
Running Pro*C program in Unix environment.
I have a program developed in Pro*C running on AIX version 5.3 and at the moment compiled in a 10g release 2 environment. This program find some job to start via a system() call. On previous release of Oracle software I have the possibility to get er
-
Greetings, I tried to search, but couldn't find exactly the answer I was looking for. I need to export images as jpegs in the CMYK profile for printing in a catalog. Can Aperture do this? Thanks, Josh
-
Find Logical Erros Causing an Odd Error in BlackJack
This doesn't happen too often but sometimes it does. I can't seem to find a reason why. If i enter 1, it should enter the while loop but it instead ends the process. --------------------Configuration: <Default>-------------------- You drew a 10 You d