Volume on my ipad 4 has been dropped suddenly after iOS8 upgrade

I have upgraded my iPad 4 to iOS8 and since then speaker volume has dropped and hard to hear. Kindly suggest how to fix the issue.
Thanks
Ram

Try turning off the following:
Settings>Mail, Contacts, Calendars>Push>OFF
Settings>Notifications>Mail>Gmail>Notification Center>OFF
Settings>Mail, Contacts, Calendars>Fetch New Data>Off

Similar Messages

Ipad air restarts all of a sudden after ios8 upgrade

Ipad air restarts all of a sudden after ios8 upgrade. Restarted 7-8 times. What should be done?

restored the ipad from itunes, did hard rebbot. Still reboots on its own. Any suggestions.....

IPad apps can't access photos after iOS8 upgrade

I've got a number of apps on my iPad that used to be able to access the photos in my iPad Photos app but no longer can access them. I checked under Privacy > Photos that they are enabled and I went to General > Restrictions and made sure all restrictions are off. I changed nothing after the upgrade and all the apps could access photos before the upgrade.

Hold down ⌥ and ⌘ whilst launching photos and try repairing the library.

Ipad mini has a typeing delay after iOS7 upgrade!

I have rebooted without success.

Hi there Firstlady203,
You may find the troubleshooting steps in the article below helpful.
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
-Griff W.

The volume on my iPad 3 has dropped considerably. I have read quite a few posts and followed advice re doing reset and checking settings. Nothing has worked. WHEN IS APPLE GOING TO ADDRESS THIS ISSUE.

The volume on my iPad 3 has dropped to a very low setting. I have tried all the suggestions with setting and did a reset, nothing works and it seems this is an issue with many others. When is Apple going to address this problem?

You aren't talking to Apple here. This is a user to user technical help forum hosted by Apple. We are all users here.
For what it's worth I haven't see any change in volume on my iPad 3.

The iPad has been dropped accidentally...

An iPad has been dropped and turned black...cut off.
Can you offer suggestion on re-setting?
Can it be turned back on or is it dea?

Apple's Limited Warranty http://www.apple.com/legal/warranty/ for iPad excludes coverage for damage resulting from accident, disassembly, unauthorized service and unauthorized modifications.
Apple will provide a replacement iPad for about 1/2 the cost of a new iPad. You can get it repaired at 3rd party repair sources for less $, however, the Apple warranty will be voided.
iPad Repair & Screen Replacement Services
http://www.ifixyouri.com/16-ipad-repairs
 Cheers, Tom

The volume on my iPad 3 has gone. I've checked the mute button, tried restarting, resetting etc and nothing has changed. I can't hear the music, hear any sound from videos. Most times the video stops playing after a seconds. My iPad 3 is only 2 months ol.

The volume on my iPad 3 has gone. I've checked the mute button, tried restarting, resetting etc and nothing has changed. I can't hear the music, hear any sound from videos. Most times the video stops playing after a seconds. My iPad 3 is only 2 months ol.

If you have lost all sound and video is freezing on you, that ain't good. Your iPad is two months old so I would not hesitate to contact Apple at all. You are entitled to 90 days of phone support.
http://www.apple.com/support/ipad/contact/.
If you want to try a couple of things on your own, try quitting all apps and then reboot the iPad - not so much for the sound issue itself - but more as a general "start all over again" sort of approach. It might help with the video freezes.
Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Reboot the iPad.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
If you use headphones on occasion, you can try plugging and unplugging those as well and see if the sound comes back.
You could even try restoring the iPad to factory settings and then restore from a backup, but unless there is something totally hosed on the iPad, that should not be necessary with a two month old device - of course assuming that you didn't drop the iPad or do something accidental that could be causing the problems.

Error message: ni: A frame has been dropped and the acqusition has been canceled

I use a NI PCIe 1433 framegrabber with a Basler spl4096-140km line camera.
Using triggered acqusition with an external source, I can get a framerate of 68500Hz in NI-MAX.
When I use the Matlab image acquisiton toolbox to acquire data, I however very often get the error message: 'ni: A frame has been dropped and the acqusition has been canceled". This happens even at much lower framerates (20kHz) and only seems to go away when acquiring data slowly.
Computer is a Dell Precision 7600 and I assume there should be no issues with RAM or the PC being slow. The error does not go away when reducing the data size (i.e. reducing the ROI to one single point that is readout).
Do you have any pointers why this error message appears and what can be done about it?
Thank you!
Reto

Hello,
I encountered the same problem and I think it is because the allowcation of storage in matlab cannot catch up with that of the camera so that it will drop frames when the buffer is full.
I also want to know how to solve that.
Yang

HT1212 My granddaughters Ipad II has been disabled and I do not know how to enable it, any quick fix suggestions??

My Granddaughters Ipad II has been disabled and I need a quick fix if there is one???

What do you mean by Disabled? I think you mean this:
http://support.apple.com/kb/HT1212

Hi all, My macbook has been dropped and completley smashed...

Hi all,
My macbook has been dropped and completley smashed...i.e bent battery, smashed screen,etc I have already ordered a new macbook air, the question is i need to get my data of the old one as my last back up was exactly 6 months ago, is that possible ???
Many thanks

If your MacBook was off when dropped, the Hard Drive can sometimes survive a crash that will break the screen.
To access it, you will need to remove the drive and place it in a 2.5" format drive enclosure. If you dropped today's MacBook, it would require a SATA connector inside. Some really old ones may be ATA drives.
USB interface on the outside will be really slow, but is really cheap. If you think you might want to use the enclosure later for anything except backup-only, upgrade to a FireWire enclosure. OWC has a few different ones:
http://eshop.macsales.com/shop/usb/add-ons-and-hubs/enclosure-kits

How do I get an iPod touch to turn on other than the normal way. It has been dropped and all I can get is a blank screen. Have tried holding the HOME button down for 30 sec. but that didn't work.

How does one get an iPod nano to turn on other than the "normal" way? This one has been dropped and all I can get is a blank screen. I have tried holding down the HOME button to restart it but no go. When I connect it to my computer, I am told to enter the PASSCODE which I cannot do as there is no touchpad.

David ..
Your topic refers to an iPod touch
Then you say: How does one get an iPod nano to turn on ......
If it's an iPod touch, try a reset.
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, whether it's an iPod nano or touch, it probably needs service > Apple - Support - Service Answer Center

Strange IMAQ Error Message: "ni: A frame has been dropped and the acquisition has been canceled."

Hello,
I am getting a strange error trying to use the NI PCIe-1427 with the MATLAB image acquisition toolbox configured with continuous acquisition. After about 5 minutes of acquisition, I get the error below:
??? ni: A frame has been dropped and the acquisition has been canceled.
Does anyone have any clues as to why I am getting this error / where I can find out what causes it? I need to acquire several hours worth of data and this error completely aborts my acquisition.
--Y

Hello,
Turns out that I found the problem. I had a slow memory allocation in my MATLAB code and this delay allowed too many frames to be accumulated in memory. I still do not know the source of the exact text of the error, but upon removing the slow memory allocation the error no longer occurs. I believe that it may have resulted from a buffer overrun of some sort in the underlying driver.
Given that this no longer poses a problem for me, I will not pursue it further.
Thank you for your help!

I have an ipad that has been 'locked up' since 10 a.m. central time this morning. It is stuck on the web site that I was looking at

I have an ipad that has been 'locked up' since 10 a.m. cent. time this morning! I cannot do anything to get it to shut off or reset. What do I need to do?

First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414

Ever since upgrading to lion my wifi has been dropping out constantly is apple going to fix this?

Ever since upgrading to lion my wifi has been dropping out constantly is apple going to fix this?

There are two possibilities, 1)it is a software problem which will be fixed.
2)It is a hardware problem, and youll have to take it to an iStore.
BUT there is something you should know.
If your under apple care, its free.
If you are not under apple care, itll cost you something to find out where the problem is (i dont live in the US so I dont know) and then extra cost for the reapair itself.

HT1212 How do I perform step 5 in the Recovery Mode when an iPad minnie has been disabled for having more than the allowable entry attemps?

How do I perform step 5 in the Recovery Mode when an iPad minnie has been disabled for having more than the allowable entry attemps ?

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.

Volume on my ipad 4 has been dropped suddenly after iOS8 upgrade

Similar Messages

Maybe you are looking for