Volume only goes so high on 55US610U

We noticed the volume goes to 100, but it does not get any lounder after about 30. And we did notice a slight crackle out of one speaker, but do believe its from the channel. Why wont the sound get any louder? Its set up as Stereo, bass boost is low, and dynamic is high.

I have a 52HM95 DLP. The manual for my set says to press down the recall button, press 8-0-0-0. Press the
VOLUME down. The mode buttom will blink four times (unlocked). I think the mode indicator light has to be on T.V. If you have to reset the remote, press the recall button, press 8-9-0-0. The mode indicator light will blink 2 times, and then a pause and blink 2 more times. It sounds like some other device, like a cable box or stereo might be the controlling device for your television volume. If you do reset your remote, all other devices on your remote might be lost and could have to reprogram it all over again. Good luck

Similar Messages

HT1349 My IPAD volume automatically goes to high volume ...

even when no music is on. I have tried to reset it but it contiues to do it. I turn volume down then it does it again and the volume symbol stays on the screen until I press it down once. Any idea how to get this to stop because it doesn't do it all the time but often enough to be annoying. Thanks

Select that region and in the menus clear all automation on that track, sounds like an automation issue.

How can Apple claim the iPhone has a Super-High res screen when its not even HD? From what I understand, 1280x720 is basic high definiton, and the retina screen only goes up to 1136x640.

How can Apple claim the iPhone has a Super-High res screen when its not even HD? From what I understand, 1280x720 is basic high definiton, and the retina screen only goes up to 1136x640.

There's more to resolution than pixel count. Consider the pixel size on the iPhone screen in comparison to the pixel size on your forty inch HD TV.

I am 13 but going into high school next year and possibly an elite boarding school that is 9 hours away from my town. I need to get a mac air for school purposes.How can convince my parents to let me get one?

My house has always had macs and my parents don't like pcs. I don't either. They are slow and so far behind from macs. So i am going into high schoo next year and parents don't let me on the computer without asking and have them all password protected. I did have my own ibook g4 but it broke randomly. My mom says i will isolate myself from too much scree time and get depressed but i love macs and i would like to work in an apple store someday but i'm not even allowed to buy my own ipod touch with my own money. But my mom has an new imac, ipad and iphone and ipod and all of this has been gifts to her. But i really need a computer for school. I have written lists of good reasons not like i want it but good ones and asked nicely but my mom just says because and thats the only reason i need to know. and by the way she is a teacher so she thinks technogly is evil. How can i get the mac air??

I really do not want to enter a family discussion about what you should or should not have. If the MBA is to support your school work then you need to present your arguments on that point. If there is a concern about using a Mac when the school supports PCs then point out a Mac can also use Windows on a BootCamp partition so it is fully compatible with both systems.

External monitor revolution only goes up to 1080p

Hi everyone,
     I just get my new monitor Dell U2713hm today, but I am so disappointed that the resolution of the new monitor only goes up to 1080p. The font looks blurry, so I want to adjust it to higher resolution. I have tried to use Dual link + MDP, HDMI + MDP, and MDP to HDMI cable(CONNECT, by Belkin, and it's labelled "4k" on it box). Still, none of them works...
     It's so annoying for see blurry things on the screen, please help... Thank you so much!!!
     I attach the screen shot to provide more details.
The above picture is showing the profile of my external monitor.

From MacBook Pro (Retina, 15-inch, Mid 2012) - Technical Specifications
Graphics and Video Support
Intel HD Graphics 4000
NVIDIA GeForce GT 650M with 1GB of GDDR5 memory and automatic graphics switching
Dual display and video mirroring: Simultaneously supports full native resolution on the built-in display and up to 2560 by 1600 pixels on up to two external displays, at millions of colors
Thunderbolt digital video output
Native Mini DisplayPort output
DVI output using Mini DisplayPort to DVI Adapter (sold separately)
VGA output using Mini DisplayPort to VGA Adapter (sold separately)
Dual-link DVI output using Mini DisplayPort to Dual-Link DVI Adapter (sold separately)
Are you using OSX or Windows (or some other OS)? What happens when you Option+Click on Scaled button? Here is an example.

Changing OSX default volume setting to a higher level in sound preferences

When I change the default volume setting to a higher level in sound preferences within OSX, it is back at the lower level at the next listening session the following time I use iTunes on my Mac Mini. Within System Preferences there is a section that lets you "choose a device for sound output" but the only choice I have is "line-out" and under the "port" heading there is only "built-in output"--no other choices are shown. I have external speakers attached which I like to use for listening to music as I work. What is the problem? Why won't the higher volume I set remain? Also, shouldn't more than one choice be shown for sound output?

This sounds like the problem that I'm experiencing and <a href-"http://discussions.apple.com/message.jspa?messageID=2694517#2694517">aske d about a couple of days ago. The sound level resets to 50% after shutdown.
I tried setting the levels in Audio MIDI Set Up as suggested above, but that hasn't changed anything.
In answer to B_web, I am running my external speakers through the headphone jack.
So, any other suggestions?

TS2570 How do i get my mac book back to normal, i attempted a safe boot because my safari wasnt opening, when i choose it on the dock, it just bounces for a while then i get a error message. now when i turn it on it only goes halfway thru the loadbar thn

How do i get my mac book back to normal, i attempted a safe boot because my safari wasnt opening, when i choose it on the dock, it just bounces for a while then i get a error message. now when i turn it on it only goes halfway thru the load bar then shutdown?????

Hello, what OSX version?
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If that doesn't help Reinstall the OS.

TS3474 The sound goes from high to no sound when listening to the Ipod?

The sound goes from high to no sound when listening to the Ipod?

If I wiped my phone I wouldn't have the contacts on my phone to send to my self. I would need to take just the contacts from my back up. I would have to do this through iTunes and I don't see how I can just extract the contacts only from my back up. From what I can figure out it is all or nothing

Volume sporadically goes up to 100%

My volume sporadically goes up to 100%, and it's getting really annoying. This has been going on for about 2 weeks. Everything is up to date and such. Where can I start looking for why this happens?

Requested commands:
nick@fusrodah:~$ systool -vm snd_hda_intel
Module = "snd_hda_intel"
Attributes:
coresize = "26327"
initsize = "0"
initstate = "live"
refcnt = "9"
taint = ""
uevent = <store method only>
Parameters:
align_buffer_size = "-1"
bdl_pos_adj = "1,32,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1"
beep_mode = "Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y"
enable_msi = "-1"
enable = "Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y"
id = "(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)"
index = "-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1"
jackpoll_ms = "0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0"
model = "(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)"
patch = "(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)"
position_fix = "-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1"
power_save = "0"
power_save_controller= "Y"
probe_mask = "-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1"
probe_only = "0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0"
single_cmd = "N"
snoop = "Y"
Sections:
.bss = "0xffffffffa03eda80"
.data = "0xffffffffa03ed000"
.data.unlikely = "0xffffffffa03ed7d0"
.exit.text = "0xffffffffa03ea930"
.gnu.linkonce.this_module= "0xffffffffa03ed800"
.init.text = "0xffffffffa03c4000"
.note.gnu.build-id = "0xffffffffa03eb000"
.rodata = "0xffffffffa03eb040"
.rodata.str1.1 = "0xffffffffa03ebf02"
.rodata.str1.8 = "0xffffffffa03ec2e0"
.smp_locks = "0xffffffffa03ec618"
.strtab = "0xffffffffa03c7508"
.symtab = "0xffffffffa03c5000"
.text = "0xffffffffa03e8000"
__mcount_loc = "0xffffffffa03ec848"
__param = "0xffffffffa03ec628"
__verbose = "0xffffffffa03ed640"
nick@fusrodah:~$ fuser -v /dev/snd/*
USER PID ACCESS COMMAND
/dev/snd/controlC0: nick 1456 F.... panel-7-mixer
nick 1478 F.... pulseaudio
/dev/snd/controlC1: nick 1456 F.... panel-7-mixer
nick 1478 F.... pulseaudio
/dev/snd/pcmC0D0p: nick 1478 F...m pulseaudio
nick@fusrodah:~$ amixer -c Intel
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 39
Mono: Playback 22 [56%] [-25.50dB] [on]
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 39
Mono:
Front Left: Playback 38 [97%] [-1.50dB] [on]
Front Right: Playback 38 [97%] [-1.50dB] [on]
Simple mixer control 'PCM',0
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 255 [100%] [0.00dB]
Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'Front',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 39
Mono:
Front Left: Playback 39 [100%] [0.00dB] [on]
Front Right: Playback 39 [100%] [0.00dB] [on]
Simple mixer control 'Front Mic',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 0 [0%] [-34.50dB] [on]
Front Right: Playback 0 [0%] [-34.50dB] [on]
Simple mixer control 'Front Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%] [0.00dB]
Front Right: 0 [0%] [0.00dB]
Simple mixer control 'Surround',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 39
Mono:
Front Left: Playback 39 [100%] [0.00dB] [on]
Front Right: Playback 39 [100%] [0.00dB] [on]
Simple mixer control 'Center',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 39
Mono: Playback 39 [100%] [0.00dB] [on]
Simple mixer control 'LFE',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 39
Mono: Playback 39 [100%] [0.00dB] [on]
Simple mixer control 'Side',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 39
Mono:
Front Left: Playback 39 [100%] [0.00dB] [on]
Front Right: Playback 39 [100%] [0.00dB] [on]
Simple mixer control 'Line',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 31 [100%] [12.00dB] [on]
Front Right: Playback 31 [100%] [12.00dB] [on]
Simple mixer control 'Line Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%] [0.00dB]
Front Right: 0 [0%] [0.00dB]
Simple mixer control 'CD',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 0 [0%] [-34.50dB] [off]
Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'IEC958 Default PCM',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'Beep',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 15
Mono: Playback 15 [100%] [0.00dB] [on]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 54
Front Left: Capture 47 [87%] [12.00dB] [off]
Front Right: Capture 47 [87%] [12.00dB] [off]
Simple mixer control 'Capture',1
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 54
Front Left: Capture 0 [0%] [-58.50dB] [off]
Front Right: Capture 0 [0%] [-58.50dB] [off]
Simple mixer control 'Capture',2
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 54
Front Left: Capture 0 [0%] [-58.50dB] [off]
Front Right: Capture 0 [0%] [-58.50dB] [off]
Simple mixer control 'Auto-Mute Mode',0
Capabilities: enum
Items: 'Disabled' 'Enabled'
Item0: 'Disabled'
Simple mixer control 'Digital',0
Capabilities: cvolume
Capture channels: Front Left - Front Right
Limits: Capture 0 - 120
Front Left: Capture 60 [50%] [0.00dB]
Front Right: Capture 60 [50%] [0.00dB]
Simple mixer control 'Independent HP',0
Capabilities: enum
Items: 'Disabled' 'Enabled'
Item0: 'Disabled'
Simple mixer control 'Input Source',0
Capabilities: cenum
Items: 'Front Mic' 'Rear Mic' 'Line' 'CD' 'Stereo Mix'
Item0: 'Rear Mic'
Simple mixer control 'Input Source',1
Capabilities: cenum
Items: 'Front Mic' 'Rear Mic' 'Line' 'CD' 'Stereo Mix'
Item0: 'Front Mic'
Simple mixer control 'Input Source',2
Capabilities: cenum
Items: 'Front Mic' 'Rear Mic' 'Line' 'CD' 'Stereo Mix'
Item0: 'Front Mic'
Simple mixer control 'Rear Mic',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 0 [0%] [-34.50dB] [on]
Front Right: Playback 0 [0%] [-34.50dB] [on]
Simple mixer control 'Rear Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%] [0.00dB]
Front Right: 0 [0%] [0.00dB]

MacBook pro doesnt start. When I start my lap top, it shows the apple and the line uploading but it only goes like to 1/3 and then it goes blank for some seconds, then it turns off by itself and turn on again and happen the same, apple logo, etc

MacBook Pro doesnt start. When I start my lap top, it shows the apple and the line uploading but it only goes like to 1/3 and then it goes blank for some seconds, then it turns off by itself and turn on again and happen the same, apple logo, line .. the noise like-fan going on, then turn off and turn on again. Tried starting holding option command P and R key and didnt work either. Starting to think I have lost all my data inside

Try a SMC reset.
http://support.apple.com/kb/ht3964
It might be helpful if you indicated the exact model/year of your MBP. Are you running Lion OSX?
Ciao.

I have Adobe Photoshop Elements 5.0 and am trying to upgrade to 13 - getting error message that "file archive part" of Adobe 13 is missing. When I try to download installers for older products it only goes back to v7, not v5 what to do next?

I have Adobe Photoshop Elements 5.0 and am trying to upgrade to 13 - getting error message that "file archive part" of Adobe 13 is missing. When I try to download installers for older products it only goes back to v7, not v5 what to do next?

TDFields you will want to ensure the 7z and exe file are in the same folder/directory. You can find more details at Find a download link on Adobe.com.

No sound through tv when hooked hdmi hpdv7 4069 sound only shows idt high def codec

win 7 64 HPdv7 4069wm notebook not reconizing hdmi device manager sound, video only show idt high def codec
display adapter shows amd m880G with ati mobility radeon HD4250 & ati mobility radeon

Please follow the instructions mentioned in THIS document, and also go through the following VIDEO which will help you resolve the issue.
Although I am an HP Employee, I am speaking for myself and not for HP.
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.

I am trying to locate an email that I deleted and assume should be in the trash. However my trash now only goes back a few days - how can I increase the number of days the trash remains accessible for

I am trying to locate an email that I deleted and assume should be in the trash. However my trash now only goes back a few days - how can I increase the number of days the trash remains accessible for.

StevieJ wrote:
I am trying to locate an email that I deleted and assume should be in the trash. However my trash now only goes back a few days - how can I increase the number of days the trash remains accessible for.
Check Mail Preferences, Accounts tab. Select the account, then the Mailbox Behaviors tab. See if you have it set to Permanently erase deleted messages when: One week old. (or less)

Moved house and TM only goes back to move date

We moved out temporarily to restore our home in Nov 09- I have had TM working backing up my Mac Pro to an external drive for a year or so. The MP wasn't used for a while work was going on. I was actually working from another machine, a Book. I disconnected the Drive to access work from my Book. I've now brought the MB to the temp home and will use it there, but now I've connected the drive back to it and ran TM, if I enter, it only goes back to the date I switched off and moved the drive! Does this mean I've lost all previous evidence of back up?
Thx

my splitty is a 1962 wrote:
Just for the future then, when I get to the stage where files have been dormant on my machine and I need to make room, would one usually just erase them from the machine, knowing that the exist on back up
NO. First, that means you only have one copy. When your backup drive fails (and they all do, sooner or later), you risk losing it. Plus, Time Machine will, eventually, delete it's copy of anything that's no longer on your system.
should they be copied onto another drive as filed work/files?
Yes. Or "archived" to CDs/DVDs.
The latter would mean the same files exist in 2 places, seems a bit of a waste of space?
Exactly. The essential part of a good backup strategy is to have (at least) two copies of everything important, in (at least) two places. Three is much better, especially if one is off-site (safe deposit box, workplace, relative's house, etc.). That way, you're also protected against fire, flood, theft, direct lightning strike on your power lines, etc.

I dropped my ipad mini and the left side got dented .. so the volume buttons and the mute is not working anymore .... and when i am playing games the volume automatically goes up... i still have warranty .. so does apple replace a new one?

i dropped my ipad mini and the left side got dented .. so the volume buttons and the mute is not working anymore .... and when i am playing games the volume automatically goes up... i still have warranty .. so does apple replace a new one?

Steven ~ Welcome to the Support Communities. The following may be useful for next time...
AppleCare+ for iPad extends your coverage to two years from the original purchase date of your iPad and adds up to two incidents of accidental damage coverage, each subject to a $49 service fee. Note: AppleCare+ must be purchased within 30 days of the date you bought your new iPad.
iPad mini cases from Tech21
iPad mini screen protector from Tech21

Volume only goes so high on 55US610U

Similar Messages

Maybe you are looking for