Volume OSD always showing "0"

Hi,
I've got a problem with the green volume bar that appears when you use the volume keys. The OSD always shows the volume level as zero ("0" text on the right, empty bar). Controlling the volume works just fine though, it's just the volume level OSD that's broken. Mute icon in OSD also works.
I already reinstalled the hotkey drivers several times, including older versions. Also tried deleting the registry entries (HKCU\Software\IBM, HKCU\Software\Lenovo, HKLM\Software\IBM, HKLM\Software\Lenovo), no luck there.
Same thing also happens when logging in with a clean user profile.
Any ideas?
Message Edited by kalsm on 04-12-2009 06:07 AM

and when i put it on charge the number of battery always decrease and stop on 0% !!!! Please help me

Similar Messages

My time machine always stops at some point... It always shows this message: "Time Machine Error. Unable to complete backup. An error occurred while copying files to the backup volume.

My time machine always stops at some point... It always shows this message: "Time Machine Error. Unable to complete backup. An error occurred while copying files to the backup volume. I have tried everything and even did time machine in safe boot as told by an apple suppoprt advisor. still the same error after 16gb

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message that corresponds to a failed backup. Now
CLEAR THE WORD "Starting" FROM THE TEXT FIELD
so that all messages are showning, and scroll back in the log to the time you noted. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If all you see are messages that contain the word "Starting," you didn't clear the text field.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting.

HP Pavilion dv7-3170ez: volume indicator not showing when setting volume

Hi
I own a Pavilion dv7-3170ez, and when I change volume using the volume touch-slider on top of the keyboard, volume is adjusted accordingly but no volume indicator appears on the screen.
Previously, while setting volume, a speaker icon with a slider popped out in the middle of the screen showing current volume level.
I'm using Windows 7 Home Premium and both Windows Update and HP update shows that I have latest version of software. Also, I've the latest version of the BIOS installed.
As a side note: the touch buttons on top (volume, speaker and wireless enable, etc.) stopped working a few days after the volume indicator disappeared, I fixed that by plugging off power and disconnectiong battery for a while. Still, the indicator is yet not showing. Not sure if this is related (I guess not).
Thanks
This question was solved.
View Solution.

The Volume OSD is a function HP MediaSmart Menu. It will need to load on start up. To do that, go to msconfig, and make sure it is checked under the Startup Tab....
If it is not there, you can download it from here...ftp://ftp.hp.com/pub/softpaq/sp48501-49000/sp48552.exe
Although I am an HP employee, I am speaking for myself and not for HP.
Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

The change volume indicator image show black corners.

When I hit F11 or F12 to change the sound volume, the pop up sound icon would always show the black corners. Has anyone seen the same issue? The corners just look horrible.

Try Startup in Safe Mode.
Start up in Safe Mode. http://support.apple.com/en-us/HT1564

How to always show rulers in Photoshop CS5 and other problems

Does anyone know how to make Photoshop CS5 always show rulers in mac? I have not have this issue with any other PS. I need the rulers to drag guides contantly, but photoshop cs5 would not show the rulers automatically. Everytime I have to go to View --> Show rulers or the shortcut command + R. Is there a way to instruct Photoshop to always show rules with any file I open or create?
I have many other issues with Photoshop CS5 that CS2, 3, and 4 had out of the box... It is very frustrating that I spent all this money and instead of working, I have been on the phone with Adobe for hours... I am very disappointed so far.
I have had CS5 Master's Collection for 2 months now on Mac 10.6.7. I have reinstalled Photoshop 3 times as some shortcuts were not working like shift plus scroll to inscrease to 100%, 200%, etc.
The other thing that still does not work and Adobe has not offered a solution is that my Photoshop would not append extensions. Regardless of the Preferences settings, all my files get saved as JPG instead of jpg... I wonder if any of you out there have this issue as well?
Thank you.

I believe my computer and its account are healthy. I just bought the mac pro with solid state and the only programs I have installed are the Master Collection CS5.
I have good news though - After two months of waiting, I was finally able to speak with Adobe specialists yesterday and they changed the shortcut for Save As that Photoshop ships with from Command + Alt + S to Command + Shift + S - and miraculously now Photoshop appends extensions!!!
However, my question about always displaying rulers remains. We got disconnected and I didn't have a chance to ask them (I was on hold for an hour and a half!)

Windows always shows lock screen when idle, ignores setting

On Windows 8, I had my computer set up so that the screen would turn off after a period of inactivity. When I would move the mouse or press a key, it would resume without asking me to log in. After upgrading to Windows 8.1, it is now always showing me the
lock screen when resuming from idle. In the lock screen settings, I found a new option named "When my PC is inactive, show the locks screen instead of turning off the screen". I have disabled this setting, but my computer still locks every time the
screen turns off.
How can I get my computer to stop locking when it is idle?

Hi,
What about the settings in Screen Saver? Please check the Option "On resume, display logon screen" is unchecked.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SMF service always shows offline even when it is up and running

I have added a service to SMF under /var/svc/manifest/application and am successful in starting it, but state always shows offline. How can I get it to show up as "online"?
Output of svcs -l command:
bash-3.00# svcs -l esm
fmri svc:/application/esm:default
enabled true
state offline
next_state online
state_time Fri 01 Jun 2007 11:02:47 AM PDT
logfile /var/svc/log/application-esm:default.log
restarter svc:/system/svc/restarter:default
contract_id 1113
dependency require_all/none svc:/system/filesystem/local (online)
dependency require_all/none svc:/network/mysql (online)
ouput of svcs -x command:
bash-3.00# svcs -x esm
svc:/application/esm:default (?)
State: offline since Fri 01 Jun 2007 11:02:47 AM PDT
Reason: Start method is running.
See: http://sun.com/msg/SMF-8000-C4
See: /var/svc/log/application-esm:default.log
Impact: This service is not running.

Turns out I just needed to launch the app as a background task (use & in my svc method file) and it works fine.

Cisco Jabber for Windows always shows "Away"

Cisco Jabber for Windows (9.0.1, CUPS 8.6.4, UCM 8.6.2, Exchange 2010) always shows status as "Away" for one user. Others seem to be working correctly showing "one the phone", "in a meeting", etc. Tried reinstalling client with no change. If you manually change to "Available", it changes right back to "Away". Anyone have an idea where to look (registry, logs, etc.)?

I am seeing the same problem. I haven't tried a different user to login on the same machine, but I did try closing my client on my primary machine (exited) and then logged in on a different computer with a fresh Jabber for Windows install.
I am running Jabber for Windows Version 9.0.2 Build 9453 on windows 7 64bit primarily, and Windows XP as the second test. Running CUPS 8.6.4 in HA over WAN cluster mode with CUCM 7.1.5 and Unity Connection 8.5.1 ES 16.
Phone presence information does still flow through when I pick up my phone hand set my status changes from Away to On a Call.
When I check the presence diagnostic test for my user, it also reports that I am away.

Messages status always shows "offline"

I have only updated my mid 2009 macbook pro to Yosemite.
I have synced to my iPhone ok.
My Messages status always shows "offline" on the MBP even though I can chat on it.
Many thanks for any help.

At the bottom of the left New Message box, you can change it there.

HT5622 Hi, can you help me for my payment account? It's always show " Your payment method was declined..." How can I fix it? There's only 3 to choose fpr Visa, Master Card and Amex.. But doesn't have "None".. I can't download any apps from app store :(

Hi, can you help me for my payment account? It's always show " Your payment method was declined..." How can I fix it? There's only 3 to choose fpr Visa, Master Card and Amex.. But doesn't have "None".. I can't download any apps from app store

http://support.apple.com/kb/ht1918

Why is it that when I set the preference to always show the tab bar, it refuses to stay checked after I quit Firefox and restart it?

Using Mac OSX10.6.7 and FF 4.0.1, I'm having a problem with the preference to always show the tab bar. I want it to always show. I check this in the Preferences under the "tab" window, and everything is fine until I quit FF and when I restart FF the tab bar is gone again. I go into preferences, and that option is now unchecked. How can I fix this so that my preference is saved?

That hasn't helped the last ten times I tried. I posted before. I deleted the preferences file, I tried changing the preferences file, I went into about:config and changed the autoHide preference there. No dice. Firefox is not saving my preference for that one thing.

I SET UP THE HOME SHARING ON MY COMPUTER, AND i CAN STREAM MY PHOTOS AND SEE ALL THE VIDEOS AND LISTEN SONGS IN MY ITUNES, BUT CAN NOT DO HOME SHARING, ON THE TV, ALWAYS SHOWS "TURN ON HOME SHARING ON YOUR OMPUTER WITH YOUR ID WHICH I DID BUT NOTHING HELP

I just bought my apple tv yesterday and SET UP THE HOME SHARING ON MY COMPUTER, I CAN STREAM MY PHOTOS AND SEE ALL THE VIDEOS AND LISTEN SONGS IN MY ITUNES, BUT CAN NOT DO HOME SHARING, ON THE TV, ALWAYS SHOWS "TURN ON HOME SHARING ON YOUR OMPUTER WITH YOUR ID WHICH I DID BUT NOTHING HAPPEN. WHAT'S WRONG? WHAT SHALL I DO NOW?

I have found with AppleTV that it is the IPV6 on the computer you want to access is the problem. The issue is that Homegroup on Win 7 or Win 8 requires IPV6 to work, but AppleTV won't work with IPV6. (So maybe double check you have IPV6 turned off)
So you have to make a choice - Homegroup or AppleTV.... but you can't have both, until Apple brings ATV up to date. (crazy that it does not recognise IPV6 - c'mon Apple!)
You can set up sharing individually in Win 7 or 8 and have the ATV access files that way.
Having said that, there is always the exception.. I have an old HP home server running Win8 and it services ATV - but is part of the Homegroup... have no idea why it works on both, but no other machine on the home network will talk to both ATV and Homegroup at the same time!

I have a iPhone 5 and I am not able to toggle between the show my caller Id option on and off. How can I do that ??? It always shows greyed out and also because of which I am not able to make outgoing calls. So please help

I have a iPhone 5 and I am not able to toggle between the show my caller Id option on and off. How can I do that ??? It always shows greyed out and also because of which I am not able to make outgoing calls. So please help

Not all carriers allow that to be set using preferences in the phone. Contact your carrier.

Is there a way to default the monthly calendar display so that the current day always shows on top?

Is there a way to default the monthly calendar display
so that the current day always shows on top? ie, I want to always be able to see what's in the future 3-4 weeks, not what's in the past 3-4 weeks. The default monthly display is archaic--only allows you to see through the last day of the month. Suddenly today
is Oct. 30th, and I have a ton of projects lined up in November, but because I haven't been scrolling down every day, I haven't been aware of them every day. I realize there are other tools in Microsoft to help me stay on task, such as reminders and such,
but it would be helpful if I could always have the current day display on top of the monthly view so I can quickly scan what's coming up in the next few weeks.

Thank you!
Right, I already have it in Month view. My question is a little more specific--I'd like for the current day to always display at the top. For example, today is Oct. 31st, so the current day is at the bottom of the calendar since it is the last day of the month.
I can view everything in October that I've already completed. What I can't see are the future weeks because we haven't hit November yet. I'd like for the current day to always display at the top of my calendar so I can always see what's coming in the following
three - four weeks (whether they're a part of that month or not). I've been to other forums trying to find the answer, and have come across the same exact question from frustrated users--but there seemed to be no solution. So I'm posing the question myself
in this forum. Do you know if this is possible? What I found from other forums is that Outlook defaults to a physical 'desk' type calendar format--so just as I'd use a paper calendar at my desk, I wouldn't be able to see the following weeks unless I either
flip the page to that month or I come to the first day of the next month, thereby tearing the the old month off and now only able to see the current month. That format is just so...paper...and archaic! Essentially I want the calendars to loop so it doesn't
even really matter what month it is--I just always want to see what lies ahead without having to scroll down. With our being in the Technology Age, I'd assume this is a logical expectation, but we may be stuck with the replica version of the paper-desk-calendar
format until Outlook programmers add this Technology Age feature in newer versions.
See, this month kind of messed me up because I have so many projects for November that start tomorrow and next week, but I haven't seen them until this week. I would have been better quipped--at least expecting them--had I been able to see all of those projects
since last week or the week prior.
If there is no solution to this answer, would you know how I can contact Outlook to provide feedback? I'm guessing a newer version is on its way...
Thanks again in advance!

In Dual Monitor setup, with Thunderbird not in main monitor, the some dialogs always shows in other monitor

I have a three monitor set up. I have Thunderbird running in the right monitor. My main monitor is the middle one. Dialogs, such as Spell check, Activity Monitor always show up in the main window (not the one with Thunderbird) in the upper left hand corner.
It happens on Windows Vista and Windows 7 Professional.
I have Thunderbird version 24.3.0

Some dialogs when moved, stay moved. Others do not. The ones that frustrate me are those that are Centered and therefore show up split across my two monitors.

Volume OSD always showing "0"

Similar Messages

Maybe you are looking for