Volume problem after installing Remote app

After I installed the Remote app to my touch I used it for a little while and then turned it off. I went to use it again but when I was listening to music regularly I noticed that the volume was as high as possible even though I had it barely on. Does this have to do with the app or is something wrong with my touch?

I deleted the app from my touch and now it works normally. Here's a link to how I did it. After you do it turn off your Ipod, then tirn it on again it should be fine. http://support.apple.com/kb/TS1702

Similar Messages

I see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder

i see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder. I see that it means that it isn't reading the new hard drive.
did i miss a step between transferring all of my information from my old hard drive to the new hard drive and installing the new hard drive into the computer. I believe that i installed properly. it was quite easy.
thanks for your help

It means there is no bootable system on the drive. If you still have access to the old drive, then I suggest you boot from it then clone it to the new internal drive. Use OPTION boot to boot from the Recovery HD on the old drive:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     1. Select Disk Utility from the main menu then press the Continue
         button.
     2. Select the destination volume from the left side list.
     3. Click on the Restore tab in the DU main window.
     4. Select the destination volume from the left side list and drag it
         to the Destination entry field.
     5. Select the source volume from the left side list and drag it to
         the Source entry field.
     6. Double-check you got it right, then click on the Restore button.
Source means the external old drive. Destination means the new internal drive.

Printing problems after installing the Epson Printer Driver 2.16

Has anyone experienced any problems after installing the Epson Printer Driver 2.16 through Software Update? I am having problems printing. It denotes an error message, specifically the rastertoescpii.app isn't working?

Oops, wanted everyone to know that the driver that Software Update downloaded and installed was 2.18, not 2.16 (which was the last one that worked for me). I just got done downloading the 2.18 driver directly from the Apple support website and installing it. Guess what? My printer is now working and everything is fine. If you are having issues, I suggest this route. Guess I solved my own problem, but hope this helps someone else.

After installing Mavericks, App Store/Numbers/Pages don't load

After installing the upgrade the Mavericks, some apps wont open including;
App Store, Numbers, Pages, iBooks, Maps, Keynote
Error code in Console reads;
Unable to load nib file: Mainmenu, exiting
as well as exited with code : 1
Can anyone help or is it a trip to the store?
I'm on a Macbook Pro early 2011
Thanks,

All
I found the solution myself without having to go to the store.
Restarted Mac
During startup, hold down Command and R keys when grey screen appears
Popup appears
Select Reinstall OS X
Reinstalls Mavericks
Some Apps still dont work - Numbers, Keynote, Pages
Simply moved Apps to trash, emptied trash and rebooted Mac
Went to App Store - now working after reinstalling Mavericks - and went to Purchases and installed/updated Apps
All now working fine......
Hope this helps anyone else.
PS....DO NOT RUN TUNEUPMYMAC APP - I think that this may have added to the problem after installing Mavericks the first time, but can't be sure.

Problem after installing IOS 8.0.2

Hi there,
I have a big problem after installing of IOS 8.0.2 on my Ipad mini retina. There is no any internet connection for the applications like ITunes, App store, Facebook etc. Who can help me please for this matter? or how can I get back my previous version?
Thanks for the sopport

Hi there,
I have a big problem after installing of IOS 8.0.2 on my Ipad mini retina. There is no any internet connection for the applications like ITunes, App store, Facebook etc. Who can help me please for this matter? or how can I get back my previous version?
Thanks for the sopport

A lot of problems after installing Windows XP using Boot Camp on a Mac Book

I have been having a lot of problems after installing Windows XP Home Edition (2002).
For one, after installing Windows using Boot Camp with Mac OS X 10.5.1, I opened Windows on my Mac Book, inserted the Mac OS X Disk 1 as in the instructions and got the message: +"This package requires a newer version of the Windows installer. Do you want to update the version of the Windows Installer on your system?"+ When I clicked Yes (I had NO idea what it meant at the time), I got the message: "The required resource 'UPDATE' is missing" and the Installer quit.
How do I fix this problem?
Another problem I have is that there is no sound on the Windows XP, yet it works perfectly on Mac OS X. Is there any way to fix this problem?
A third problem I have is that I can't wirelessly connect to the internet using Window XP, yet I can on Mac OS X. I have no idea on how to fix this, and it's really messing with me. D:<
D: There are way too many problems, and I have a feeling there will be a lot more later on. Help....
~Twilight

---I'm moving this topic to the Boot Camp forums.
-Twilight

Problem after installing 10.4.8

Hello,
I installed the 10.4.8 update today. I have a brand new macbook. When the update finished downloading, my screen just turned blank, my computer didn't react at all. I could hear the fan and that was it.
So, I waited for some minutes, nothing happened. I decided to restart it by pressing the power button for a few seconds.
The computer is working perfectly now and the update was installed. But, how do I know if my computer or the HD were affected? I ran the HD test and it says that the HD seems OK.
Is that a problem with my computer or is it because of the new update? I read a posting that mentioned similar problems after installing the new update.
Thanks...

How did you update? Mac OS X 10.4.8 Update (delta)?
http://docs.info.apple.com/article.html?artnum=304200
After installing the delta version of this update on an Intel-based Mac, the computer will restart two times--the first restart after installing this update may take several minutes; please allow it to complete.
-Bmer
Mac Owners Support Group
Join Us @ MacOSG.com
ITMS: MacOSG Podcast
 An Apple User Group 
2.0 MacBook • 100GB HD • 2GB RAM Mac OS X (10.4.7) 60G Photo iPod • AppleCare

After installing an App, the icon does not appear on the desktop?

After installing an App, the icon does not appear on the desktop? Where would I find it?

Some people have found that an app (usually iBooks for some reason) hasn't appeared on a homescreen until after the iPad has been reset and has restarted : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
Also depending on what the app is have you got an age rating set in Settings > General > Restrictions that is hiding it ?

Great Problemes after installing Yosemite (10.10.2 ) with Photoshop CS6....The program crashes --last time 10 times during my work session..wacomtable doesnt work..it is slow...and get error messages about the graphic card....It s a Terror to work with my

great Problemes after installing Yosemite (10.10.2 ) with Photoshop CS6....The program crashes --last time 10 times during my work session..wacomtable doesnt work..it is slow...and get error messages about the graphic card....It s a Terror to work with my beloved Photoshop!

The Yosemite upgrade very often damages existing Photoshop installations. Thank Apple for that.
You need to uninstall and re-install Photoshop, then apply all the Photoshop upgrades from scratch.
But first, give us details about your setup:
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

DVD drive problem after installing 10.5.6

I have MacBook Pro 15",
Model Identifier-MacBookPro 2,2,
Intel Core 2 Duo 2.16 Ghz
Problem: After Installing 10.5.6 from the software update panel, my dvd drive (MATSHITA DVD-R UJ-857D) make eject sounds (sound like ejecting disc) every 10 seconds..
But if I insert cd or dvd disc into the drive, every thing is ok - no sounds, and no ejecting the disc..
Before I install this update, everyting was ok!
Please Help!!
P.S Sorry, for my english

Hi Drug;
Have you tried resetting PRAM by holding down control, option, P and R during reboot?
Allan

Hi I have a problem after install my CS6. It keeps saying MSVCR100.dll was not found

Hi I have a problem after install my CS6. It keeps saying MSVCR100.dll was not found?

32-bit OS: http://www.microsoft.com/en-us/download/details.aspx?id=8328
64-bit OS: http://www.microsoft.com/en-us/download/details.aspx?id=13523

Problem in installing any app

Why I'm always having a problem in installing any app? They keep telling me retry on all apps while installing ...

1. Settings>General>Date and Time>Set Automatically>On
2. Make sure Time Zone is correct
3. Reset iPad. Hold the Sleep and Home button down until you see the Apple Logo

HT201299 After installing an app on iPhone 5s, I can't use it outside of wifi (using cellular or mobile data) and the app is not listed in settings to enable its use of mobile data - any clues on what is wrong here?

After installing an app on iPhone 5s, I can't use it outside of wifi (using cellular or mobile data) and the app is not listed in settings to enable its use of mobile data - any clues on what is wrong here?

Steps to take to resolve this issue:
1/ Turn off Wifi
2/ Ensure Mobile (cellular) data is on
3/ Turn iPhone OFF and then ON (re-boot iPhone)
4/ Without turning Wifi on, open an app that requires mobile (cellular) data.
5/ The app will now show on the Settings list with the option to enable or disable mobile (cellular) data
6/ In time all apps that require or use mobile data will be added to the list automatically.

I have a problem to install may apps. I have started the program to download my apps but it does not happend anything. What is the problem

I have a problem to install may apps. I have started the program to download my apps but it does not happend anything. What is the problem?

D117 is the behavior describing similar to the screen shot in App doesn’t open | Progress wheel spins continually? If so then please utilize the solutions within the document to resolve the current error.

Login problem after installing and activating OS X Server app in Yosemite

After installing and activating file sharing on OS X Server on my MacBook Air, the MBA was restarted. At the login screen I enter my password into my account and it directs me to a 'Guest' login screen, asking for a password which I did not create.
HELP!!!!!

There is no longer any provision for starting a PostgreSQL process other than the ones reserved for built-in services. Create a launch daemon with content such as the following:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<dict>
     <key>Label</key>
     <string>org.postgresql.postgres</string>
     <key>UserName</key>
     <string>_postgres</string>
     <key>GroupName</key>
     <string>_postgres</string>
     <key>ProgramArguments</key>
     <array>
          <string>/Applications/Server.app/Contents/ServerRoot/usr/bin/postgres</string>
          <string>--apple-configuration</string>
          <string>/Library/Server/PostgreSQL/Config/org.postgresql.postgres.plist</string>
     </array>
     <key>KeepAlive</key>
     <dict>
          <key>PathState</key>
          <dict>
               <key>/Library/Server/PostgreSQL/Data</key>
               <true/>
          </dict>
     </dict>
     <key>StandardErrorPath</key>
     <string>/Library/Logs/PostgreSQL/PostgreSQL.log</string>
     <key>StandardOutPath</key>
     <string>/Library/Logs/PostgreSQL/PostgreSQL.log</string>
</dict>
</plist>
<plist version="1.0">
Also create these directories and files, owned by _postgres:_postgres:
/Library/Logs/PostgreSQL
/Library/Server/PostgreSQL
/Library/Server/PostgreSQL/Backup
/Library/Server/PostgreSQL/Config
/Library/Server/PostgreSQL/Config/org.postgresql.postgres.plist
/Library/Server/PostgreSQL/Data
Finally, initialize the database with a suitable invocation of initdb(1).
For more details, see the PostgreSQL documentation. You may find it easier to use a packaged third-party distribution independent of the built-in one.

Volume problem after installing Remote app

Similar Messages

Maybe you are looking for