Volume Problem Appears to Be Cause By Belkin Cassette Adapter

I've read numerous posts about people having problems with the Nano volume levels. What I've experienced is that I cannot hear anything until I've set the volume to at least 50%, and it's still not very loud even at 100%. I have installed the latest update, including the Nike running component. As many have noted, despite barely audible music, the voice that speaks to you when using the Nike adapter is deafening.
I have yet to see a resolution of this problem on any posts. Some have suggested doing a soft reset. I called Apple support and spoke with a woman in India who walked me through doing a complete restore via the computer. This worked fine for awhile, until I used my Belkin cassette adapter in the car this morning. On the way to work the volume level was fine. I then stopped for Starbucks, and when I started the car, I could barely hear the music. I tried my headphones, and once again the volume level is barely audible. I guess I have to do another complete restore, which is a hassle. Has anyone else had a problem with the Belkin? How does the Belkin cassette adapter work with the iPod volume control? Is this a software issue?

Daixa wrote: \hi , Ive got an al in one desktop just over a year old. The monitor has suddenly started flickering as if there is lots and lots if electrical interference (which there isnt) This is interittent and sometmes the screen is Ok, but then after an hour os so the screen will ping into a ghost type screen with the contents of the screen duplicated and sort of ghosted. Its as if someone was using a mobile phone or vacuum cleaner on the same plug. It looks like the graphics card is dying, although I have ploaded all the latest driers for my card. Ive had it looked at by our local shop and they rean it for two days with no problem. (they used another psu) Could it be as sinmple as a faulty psu? Could this cause this problem.
Hello Daixa, If the repair shop ran the system for two days with another power supply and the system did not display the issue, it could very well be the result of a faulty power supply.
Power supplies are not all that expensive compaired to other components of the system, and some HP power supplies do tend to become faulty after a few years of use.
Just some thoughts.
Please click the White Kudos star on the left, to say thanks.
Please mark Accept As Solution if it solves your problem.

Similar Messages

The problem I have since I upgraded to Mavericks version 10.9.1 The problem appears only with Mail not with other programs, not even with my browser. When I try to zoom the text of an e-mail I received or sent , I can no longer use the keys Command to e

the problem I have since I upgraded to Mavericks version 10.9.1
The problem appears only with Mail not with other programs, not even with my browser.
When I try to zoom the text of an e-mail I received or sent , I can no longer use the keys Command + to enlarge the text, although I can reduce it with Command -.
As I have a problem with my eyes, This is a serious matter for me.
When I write an e-mail, if I select text and press Command +, it just displaces the text to the right.
Now, my husband has a USB keyboard. If he connects it to my computer, his regular Command + does not work either, but he uses the extended keyboard, then it works. Unfortunately, he needs it for a musical application which does not work with a wireless keyboard.

Firefox 3.6.4 and 3.6.6 use a process called, "plugin-container.exe" which was using up most of my CPU when I opened up multiple tabs that contained Adobe Flash files, and caused Firefox to lock up.
My solution was to use Firefox 3.5.10 which you can get from the Mozilla website at [http://www.mozilla.com/en-US/firefox/all-older.html]
I am using Adobe Flash 10.1.53.64 without any problem in this version of Firefox. Check the release notes, I believe it contains all the latest security fixes in "Firefox 3.6.4".
Hopefully, they will fix Firefox 3.6 in the next version (e.g. Firefox 3.6.7), until then you should probably use "Firefox 3.5.10".

IPod Touch 2nd gen 4.2 update volume problems

I just updated my 2nd gen ipod touch and the volume no longer works. The volume buttons dont work, when I play music or a video theres no volume bar underneath the play/pause control. The volume will only work when I have headphones plugged into the ipod but when I unplug the headphones the volume bar disappears. Any solutions???

I have 4.2 also. I was having sort of the same problem. My problem was the volume bar appeared but in some apps it was useless. Visit settings sounds you should see the volume slider. Under that it will say change with buttons. Make sure it says on. Hope this helps.
Caleb

My iphone 4S doesn't show the volume controls when playing videos and the speakers don't sound. But if I plug in the earphones then I can hear fine and the volume controls appear on screen. Please someone help.

After a week or so of installing IOS 7 now I having this problem, the speakers don't work for videos, music or apps sounds, but they work fine for using the speaker phone. It's definitely some software issue as the volume control appears when i plug in the earphones, but disappears when unplugging them, same happens with the volume buttons on the side, they don't work when trying to use the speakers, but the work when using the earphones. Please help if you have a workaround for this. I don't want to carry my earphones all the time to listen to videos and music.

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack or other hardware problem.
Apple Retail Store - Genius Bar
If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit

When I turn on my ipad2 the volume box appears and does not go away until i hit the volume button on the side and the increase volume button does not seem to funtion only the lower section does?

I need help. I got an ipad 2 for Christmas and the volume box appears every time I turn it on and it won't go away until I hit the side volume button. I also realized that the upper portion of the volume key does not seem to work properly. Any solutions?

i face totally similar problem so i think its a software flaw. but mine got on quite a long time.
what should i do, i dun like going to the store in exchange for a refurb one

Volume problem with Music Player on N95

Hi all,
I am puzzled with a problem I'm having with my N95. The problem appeared after I performed an upgrade on the phone.
The thing is that the right side Volume keys do not work when using the Music player. I know the keys work since the zoom is working on the camera (the same keys). But what is really weird is that if I use the File Manager and open a music file, hence opening the Music player then the Volume keys work fine.
The problem is when I access the Music player either by the Media button on the handset or via the Menu > Music > Music Player.
This is driving me nuts I have tried to update the firmware with the same load without success, I just updated the firmware to the latest version V 30.0.018 hoping that it would be fixed but it didn't
Anyone have the same problem??
Thanks,

Hi pavelosk,
I solved the problems on mine. It wasn't easy and is not a straightforward solution. After several attempts everything is ok now. I had to restore the phone to original settings. But also you need to remove all media in the phone. Somehow when the files or links to files are corrupted (often by downloading music via PC suite) this in turns gets the phone in this weird status. It is best to download music files to the phone via a data transfer.
Anyways you need to make sure all music files are deleted and that from within the music player library you cannot see any music file. It must state 0 Music files.
Once you have got rid of this, then I had to load the firmware several times until it worked. I am not sure but it happened to me that there was a new firmware available, but it didn't fix it on it's own. I had to remove the files and re-flash it like 4 times before the issue dissappeared. I know it isn't a step by step guide. But no one else knows what the problem is exactly. I am happy I managed to fix mine (after more than 4 month of trying!!!)
Good luck.

Trying to backup despite Volume problems

I appear to have some volume problems with my internal HDD.
When I try to diagnose and fix it with Disk Utility the error is:
"Incorrect number of thread records" & "Invalid volume directory count"
Though the volume needs repairing, disk utility can't do it (nor can TechTool Pro http://www.micromat.com/index.php?option=com_simpleboard&Itemid=42&func=view&id= 525&catid=6)
Since I can't fix it I think I understand that it would be best to back things up, reformat the drive.
My question is esssentially academic. Would backing things up copy the volume problem I'm experiencing? or would it even allow me to copy things correctly? And how does one know what file was damaged or corrupted?

Good questions. Repairing the HD problem is something Disk Warrior could possibly correct. It's the best app. for resolving directory problems.
Did Disk Utility specifically tell you that it couldn't fix the drive, or did it simply report the error. If it's the latter, I would rerun Disk Utility as many times as necessary to get a clean run (no problems). This may not be possible given what was reported in your Micromat referenced link, however, it's worth a try.
Given the current state of the directory, you would not be able to create a clean clone backup of the drive. I suspect you would see an error during the copying. You could though drag/drop specific folders/files to the drive to the extent your HD cooperates. IMO, a "must" for any maintenance strategy.
Do you have a current cloned backup of your system. If you do, you could always copy it over the existing drive. If it is "somewhat current", you could drag/drop important data files on your computer's HD to either external media or another parition on the external, then recopy the clone to the HD. Afterward, move the data files back to their original locations.

Suddenly most of the applications have no sound and I can't adjust the volume, and when I try with the volume button, appear the message "sound effect" and nothing append

Suddenly most of the applications have no sound and I can't adjust the volume, and when I try with the volume button, appear the message "sound effect" and nothing append

Hello, Miryam Maria.
Thank you for visiting Apple Support Communities.
I see you are experiencing issues with sound on applications when playing video/audio content. If this is the case, the first thing I would check is if the side switch is set to silent as this can cause applications to be mute. Below I have included an article that covers adjusting the settings for the side switch. Also, make sure to close all applications in Multitasking and power cycle the device. Test the sound issue after processing these steps.
iPad: Understanding the side switch
http://support.apple.com/kb/ht4085
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Cheers,
Jason H.

Volume problem with Desktop Theatre 5.1 DTT2200

Hi,
I'm experiencing problems with my Desktop Theatre 5.1 DTT2200's volume. It goes up and down with no sense. Doesn't matter if I'm watching a movie, listening to music, playing games or whatever. The speaker system is connected to a SB Live! Sound card but even if I disconnect it and I use the onboard sound plugs it is still happenning the same problem.
Can anyone help me with this?
Thanks in advance!

I Have the same problem, really a shame cause the soundquality is very good, but if i have too keep adjusting the volume it's not really serving it's purpose.
The potmeter of the volumecontrol is malfunctioning. You could try disasssembling it and clean it but that didn't work for me till yet. Best is to replace the potmeter but it is impossible to find a replacement. I'm told it's a very (too) cheap component unsuitable for frequent use so i think Creative shouldn't had used it in the first place. I'm told it's a ct. component fot the far east.
I contacted Creative but they can't supply me with a substitution, either a potmeter or volumecontrol.
The volume control can't be found elsewhere because Creative designed their own connector i think.
Guess i have to annoy the crap out of myself before i buy another set.

Volume problem in IOS x Yosemite

Hi ,
I have problem in the volume when I download x Yosemite , the volume icon in keyboard not appear instead it take a way the window that Im open up .
( this happen when I click decrease volume , but when I click mute or increase volume nothing happened ) in all it doesn't appear in display icon sound .
My laptop is Mac book pro retina 13 inch mid 2014 :
The processor is 2.6 GHZ Intel core i5
Memory : 8 GB 1600 Hmz
version of Yosemite os 10.10.2
When I was download it to took me a lot of time .
What suggestions that could help the volume problem ??

Below are several links which you may like to try the various solutions as listed
os X yosemite keyboard volume not working
http://www.iphonetopics.com/no-sound-after-upgrading-to-os-x-yosemite/
http://apple.stackexchange.com/questions/151045/why-is-the-audio-is-not-working- after-upgrading-to-yosemite
http://apple.stackexchange.com/questions/152649/sound-not-working-when-running-o s-10-yosemite

HT201401 When I press the + and - buttons, the volume icon appears, but the slider is empty. When I receive a call, I hear it ring, and I can hear the ringtones in the sound menu. However, the message/mail notifications don't make any noise, and I can't h

When I press the + and - buttons, the volume icon appears, but the slider is empty. When I receive a call, I hear it ring, and I can hear the ringtones in the sound menu. However, the message/mail notifications don't make any noise, and I can't hear the sound menu.
- During a phone call, if I put the conversation on speakers ==> it works and the volume bar reappears. I can control the volume with + and - buttons. But when the conversation is over, the bar disappears again.
- With the headphones, everything is ok!
- I also noticed (only a few times) that when I do a silent to ringer mode, the volume slider reappears and works correctly during 2 or 3 seconds, before disappearing again.
I don't know what is problem,because the speakers work.

Hello jam5064,
We've an article which provides tips that can help get your iPhone working correctly.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/TS5180
Cheers,
Allen

Hello The problem appeared two days ago is that I can't open my mail app. everything was fine and functional. Now I double click on the icon and it does not respond. it receives mail and I can see push notifications on the mail icon but when I try t

hello
The problem appeared two days ago is that I can't open my mail app. everything was fine and functional. Now I double click on the icon and it does not respond. it receives mail and I can see push notifications on the mail icon but when I try to open it is no use. OS Y 10.10.2 (14C1514)

Please follow these directions to delete the Mail "sandbox" folder.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder—not just its contents—to the Desktop. Leave the Finder window open for now.
Restart the computer. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. Any custom stationery that you created may be lost. Ask for instructions if you want to preserve that data. You can then delete the folder you moved and close the Finder window.
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

HT6170 Since i got my iPhone 4S, Last year. it's the 8gb experminetal version. My phone's volume always appears. All the time. And since i got the iOS 8 yesterday. It got even worse, it won't get out anymore. I'm super mad. I need an answer real soon

Since i got my iPhone 4S, Last year. it's the 8gb experminetal version. My phone's volume always appears. All the time. And since i got the iOS 8 yesterday. It got even worse, it won't get out anymore. I'm super mad. I don't know what's going on. Is it my case? But, i don't use a case anymore. It doesn't even lessen. And when i take pictures for like 10 seconds, i get like 50 photos. Without even clicking the button. This is a real problem for me Apple, and i need you to do something about it. I need an answer real soon.

I got Troubles too with iphone 4s with the new iOS 8, its unstable, apple said its for that model to but its not totally true, well few troubles disappear if you do this:
First you need to Sync your iphone like regular you do it, but check you could made a Saffety and restore back up manually in your computer.
then when this it's already done, disconnect your iphone, then restore your iphone as factory settings, beware! don't do this if you don't have your Saffety copy first!
when you restore your iphone as factory settings iTunes will ask you if this is a new phone or a previous phone, well, select previous iphone and select the back up copy you made, and let iTunes restore all, that fix a few issues in my phone, but the real problem its iOS 8 its not good for 4s.

HT4623 please help me when update my i phone 3G i finish update but face problem , appear me msg There is no SIM card installed in the iPhone You ar attempting to activate. Please disconnect

please help me < when update my i phone 3G < i finish update but face problem , appear me msg There is no SIM card installed in the iPhone You ar attempting to activate. Please disconnect

Sounds like your phone was hacked to use with your carrier. Updating it has relocked the phone to it's original carrier. You will not get the phone working again without a SIM from the original carrier.

A problem with this webpage caused Internet Explorer (IE9) to close and reopen the tab

I have IE9 (using 32-bit version) installed on a relatively new laptop with Windows 7 64-bit. Up until last weekend IE9 worked fine and Flash Player worked fine too.
At the weekend a webpage asked for Flash Player to be updated - which I did. Ever since then whenever I go to a webpage needing Flash Player I get the message "A problem with this webpage caused Internet Explorer to close and reopen the tab". This happens twice and then an IE9 error page.
I have read the discussions in here about the problems with Flash Player 10.3 and have tried the various solutions. I have updated to 10.3.181.16 having tried 15 and 14 previously. Same problem.
I have reset IE9. Same problem.
I have disabled all add-ons which stops the problem. If I enable just the Flash Player add-on then the problem recurs. Since there are so many webpages that use Flash I do not want to run my browser without this add-on running.
If I enable the add-on and run IE9 using software rendering instead of GPU rendering then I don't get the problem. However, this isn't exactly making the best use of the resources on my laptop.
This may well all be related to the 10.3 problems but no one seems to have mentioned having a problem with tabs closing and reopening so I thought I would post on here to check.
Any suggestions for how to solve this (other than using software rendering)?

Thanks again for your reply. I appreciate the time you have taken to respond.
I think, however, you misunderstand the problem. IE9 does not reopen the tabs on just one website - it is doing this on every website that needs Flash Player. Therefore, running in Compatibility mode is not an option. In fact, because IE9 reopens the tabs so quickly and then ends up with an error page, I cannot even click the Compatibility button anyway.
I could use ActiveX filtering - true. All that this means is that Flash does not play on any of the websites. When I want to re-enable ActiveX for a particular website where I need to see the Flash Player item, this just triggers the error.
This problem also happened on .14, .15 and well as the current .16 version. It did not happen with the previous version of Flash Player that I had on the system (version 10.2 I think).
The fact is that either Flash Player or IE9 or both is/are broken. The two choices I am still left with are:
1. Use software rendering (which contradicts the latest advertisements for IE9 about unleashing the power of IE)
2. Use another browser - I have no problems with either Firefox or Chrome

Volume Problem Appears to Be Cause By Belkin Cassette Adapter

Similar Messages

Maybe you are looking for