Volume seems to be fixed with 10.4.7

Has anyone else noticed the max volume level has increased with the latest OS update?

Mine too has remained the same as it was. I wish it was fixed though. That's about the only thing I don't like about my new Macbook.

Similar Messages

865 PE NEO 2 Northbridge Temps Seem Fixed With BIOS 1.4

Since I updated to BIOS 1.4 it seems that the ridiculously high Northbridge temp seems to be fixed. I'm getting a report of 28 Degrees C in Speedfan. Can anyone else confirm? 8)

But MSI's release notes don't seem to indicate they fixed the NB temperature:
AMI® BIOS File Size 404KB
Version 1.4 Update date 2003-8-25
Update Description:
-Fixed Samsung 1GB DDR can't install Windows XP
-Removed Chinese language support
-Add PCI Slo1 to Slot4 assign IRQ option in the BIOS setup
-Fixed SATA CDROM dectect problem
-Fixed MegaRAID Ultra PCI RAID ADAPTER BIOS Ver 1.66 cannot be used
-Fixed AdvanSys PCI SCSI Bus Host Adapter BIOS v2.9Z cannot be used
Could it be something to do with your RMA'd board rather than a BIOS fix?

Disk Error - Unable to fix with disk utility

My mac was acting a little wonky today - I noticed that some programs weren't shutting down when I tried to quit them, so I ran Onyx. Immediately I recieved the note that I needed to repair my start disk with the installation disk. So, I tried that. The disk utility was not able to repair it - The error I received was " Invalid catalog record type
Volume check failed
1HFS Volume Checked
1 volume could not be repaired because of an error
I thought about purchasing Disk Warrior to try to repair it but I have no idea if it will even work on this type of error. I did free up quite a bit of space from my HD because I thought perhaps there wasn't enough free space and ran the disk utility again. received the same error. I am a bit technically challenged when it comes to trying to troubleshoot. I thought perhaps someone would be able to tell me if I should invest in DW or I should just replace the Hard Drive. It's only about 9 months old. Thanks so much.

That is a directory error. It can be fixed with software, but Disk Utility is not an Industrial-strength fixer. There is NO compelling reason to replace your hard drive hardware.
Disk Warrior is a File utility. It works very hard to collect all possible information about your files, build a new directory, and (only if you allow it) to replace the old directory with its new error-free directory. It is a good tool to have on hand, and well respected in this marketplace.
It is not sensitive to the type of error encountered -- it will use all available info to build a new directory from scratch. That will eliminate the error. I own and use Disk Warrior, and recommend it.
You should be careful about using 10.3 and older versions of ANY Utilities on 10.4 and later directories, as the directory format changed a bit with 10.4.
I got a card in the mail for a US$50 (plus US$12 for discs) offer good through 31 October 2009 for several Utilities including Tech Tool Pro (another alternative to Disk Warrior). You definitely want the bootable disc of any disk repair utility you buy. It generally takes about five minutes to boot up, but it leaves your hard drive completely available to be repaired.
I have no connection to this company and do not know if it is reputable. Their package requires 10.4, 10.5, or 10.6 and seems to be offered by Intego as a promotion for their Virus Barrier and other software.
http://www.macpromo.com/

6.0.1 seems to have fixed my iPhone 5 battery life. Hypothesis as to why inside...

So after installing iOS 6.0.1, and being COMPLETELY angry with no mention of the battery drain glitch being resolved in the patch notes, I'm pleasantly surprised that I can report that my battery life is now BETTER than my iPhone 4 was. This is like a godsend! I used to see a percentage go down in less than a minute, but I've been at 94% for the past 5 minutes of usage at max brightness with all settings on like cloud, fetch, push, etc.
My best guess as to the glitch that caused the battery drain is that something was entirely funky with the way wifi and cellular was handled, and that was the glitch that was resolved that indirectly was causing diminished battery life.
I assume that Apple was aware of the glitch, but wanted to minimize bad publicity so they never acknowledged the problem, but worked on a fix silently. I'm not sure I agree with that approach, but the important thing is that they seemed to have fixed it, since the difference is so obvious to me that it's like night and day. Can anybody else confirm their battery life has also improved significantly?

I've been using my phone constantly for the past half hour with all features on and max brightness and its only gone down 5%.
It was going down over a percent a minute before with features turned off! It's so dramatic that it's hard not to notice.

The creation of the shadow copy on the backup destination has failed. Detailed Error: The Volume Shadow Copy operation failed with the error 0x80042316

When using Microsoft Backup on a Windows Server 2008 SP2 (not R2 - [Microsoft version 6.0.6002]) I get the error "The creation of the shadow copy on the backup destination has failed. Detailed Error: The Volume Shadow Copy operation failed with the
error 0x80042316"
The odd thing is that when I start the backup manually, it works fine. When it runs automatically the error appears.
When doing a SFC /scannow I do get errors that can't be corrected.
Is there anything short of rebuilding this machine (It's a DC and the only one this office has) I can do to fix this?

Hi,
0x80042316 means "Another shadow copy creation is already in progress". This error could occur when another VSS instance is running.
Is there any third party backup application installed? Try to uninstall it to see the result. And please also check if there is another backup schedule which causes the conflict.
Meanwhile please provide the result of:
vssadmin list providers
vssadmin list writers
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected].
Hi,
I do have Crashplan ProE running. It started at 1900 and the Windows Backup starts at 2000. I have modified Crashplan not to start until 2300 to see if that helps.
Also:
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001-2005 Microsoft Corp.
Provider name: 'Microsoft Software Shadow Copy provider 1.0'
Provider type: System
Provider Id: {b5946137-7b9f-4925-af80-51abd60b20d5}
Version: 1.0.0.7
AND:
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001-2005 Microsoft Corp.
Writer name: 'System Writer'
Writer Id: {e8132975-6f93-4464-a53e-1050253ae220}
Writer Instance Id: {f0c7ee55-5885-4894-8dd3-14fffbdd4d2e}
State: [1] Stable
Last error: No error
Writer name: 'SqlServerWriter'
Writer Id: {a65faa63-5ea8-4ebc-9dbd-a0c4db26912a}
Writer Instance Id: {017a0133-7577-4322-b513-04f72404b70a}
State: [1] Stable
Last error: No error
Writer name: 'ASR Writer'
Writer Id: {be000cbe-11fe-4426-9c58-531aa6355fc4}
Writer Instance Id: {6b17d670-9ea8-4ff1-a59e-b474f4b893db}
State: [1] Stable
Last error: No error
Writer name: 'Shadow Copy Optimization Writer'
Writer Id: {4dc3bdd4-ab48-4d07-adb0-3bee2926fd7f}
Writer Instance Id: {56aad1bf-9bf1-4fde-b2f4-a706577c632d}
State: [1] Stable
Last error: No error
Writer name: 'COM+ REGDB Writer'
Writer Id: {542da469-d3e1-473c-9f4f-7847f01fc64f}
Writer Instance Id: {e942d09d-276e-450a-9bf4-b1d5abe6af8a}
State: [1] Stable
Last error: No error
Writer name: 'Registry Writer'
Writer Id: {afbab4a2-367d-4d15-a586-71dbb18f8485}
Writer Instance Id: {3737164b-61ac-454c-b1f7-42f2620f10db}
State: [1] Stable
Last error: No error
Writer name: 'DFS Replication service writer'
Writer Id: {2707761b-2324-473d-88eb-eb007a359533}
Writer Instance Id: {39458257-aca4-481e-a302-994f3eb1e9a3}
State: [1] Stable
Last error: No error
Writer name: 'Dhcp Jet Writer'
Writer Id: {be9ac81e-3619-421f-920f-4c6fea9e93ad}
Writer Instance Id: {6a8ab4aa-760c-4102-a27f-58f570c9c572}
State: [1] Stable
Last error: No error
Writer name: 'NTDS'
Writer Id: {b2014c9e-8711-4c5c-a5a9-3cf384484757}
Writer Instance Id: {53577013-8397-448e-9a25-c7cac08aa0a8}
State: [1] Stable
Last error: No error
Writer name: 'IIS Metabase Writer'
Writer Id: {59b1f0cf-90ef-465f-9609-6ca8b2938366}
Writer Instance Id: {ee2c9173-92e7-455c-8f73-601647c0ddb2}
State: [1] Stable
Last error: No error
Writer name: 'BITS Writer'
Writer Id: {4969d978-be47-48b0-b100-f328f07ac1e0}
Writer Instance Id: {b1f60392-9dfd-4e3a-bda6-3dc2cb622ba4}
State: [1] Stable
Last error: No error
Writer name: 'IIS Config Writer'
Writer Id: {2a40fd15-dfca-4aa8-a654-1f8c654603f6}
Writer Instance Id: {a328aede-78f0-448e-9c36-e8379e9fe2a8}
State: [1] Stable
Last error: No error
Writer name: 'WMI Writer'
Writer Id: {a6ad56c2-b509-4e6c-bb19-49d8f43532f0}
Writer Instance Id: {c39fa334-5c9d-4906-a3b5-33c3444948e6}
State: [1] Stable
Last error: No error
Writer name: 'NPS VSS Writer'
Writer Id: {35e81631-13e1-48db-97fc-d5bc721bb18a}
Writer Instance Id: {3c9c5584-b5fd-48cf-8541-0c8bfa585ca0}
State: [1] Stable
Last error: No error

Google voice and video chat plugin seems to not work with Firefox 4

Once login, I click on parameters item then Chat.
In the audio and video chat section my webcam seems not to be detected.
This works well with Firefox 3.6.
Any help is welcome :-)

Hello again,
Seems to be fixed in the Firefox new version (4.0.1).
Best Regards.

Illustrator crashing after 16.0.1update, 16.0.2 update seems to have fixed it

I am running win7 with latest updates, running Illustrator (64-bit) from CS6 Web and Design Premium Suite.
Illustrator crashed 6 times this week after installing the updates from the end of last week (update 16.0.1). The updates that were released today seem to have fixed it, although I cannot absolutely confirm this.
I have spent the past hour trying to break the software doing the same tasks that caused crashes earlier this week, and then far more extreme tasks then I would ever actually do or need to do, and have not been able to recreate the same crash problems.
I have been using Illustrator for nearly 15 years, it's been very rare that I've ever experienced an illustrator crash like what was happening after the 16.0.1 update. I didn't have time to troubleshoot the issue until today, fortunately the 16.0.2 update seems to have resolved the issue. If the issue returns I will follow up with another post - it's rare though that I find an article that says "I've had this problem, but it looks like you fixed it". Thank you Adobe for the fix.

my apps still dont work =[
new ones i download work but the old ones dont!!
how do i fix this? i dont want to uninstall every single app
and i have tris.. how can i re-download that?! i cant if i take it off
anyone know how to make my old apps work?

Older computer on TC network shuts down, fixed with different router

I offer this as a solution to a problem with many possible reasons. It seems the router part of my Time Capsule was causing me problems. Using an old LinkSys router and making the Time Capsule be just a hard drive seems to have fixed my problem.
The situation is this: have been using a home network for three years with two wireless newer laptops and an older G4 machine as my base station with wired connections to printer, scanner, Time Capsule, and external hard drives, etc. One main use of all this is to archive photos from my laptop to an external hard drive connected to the G4 machine. A few months ago, it seemed that the G4 would die from a kernal panic whenever I tried to transfer 2 gigabytes or more of photo files. The G4 has an upgraded chip so it can run Leopard 10.5 but otherwise is the same old machine with a bus speed of 133 mHz, etc. Also, the hard drives could have problems, or repeated communication problems could have corrupted some software.
I finally decided to do a clean re-install of Leopard and that seemed to fix the problem for a while, but lately the G4 simply shut itself down with what seemed like little provocation. After careful diagnosis (and some time passing during which time whatever the disease is could have gotten worse), I narrowed the issue to one simple Finder task.
When using the laptop (wirelessly) to browse folders on one of the external hard drives wired to the G4, it would start to show me the files, but hang up, freeze and shut down if I probed folders (of 25 to 50 large jpeg files) too quickly. However, if I went to the G4 console and performed the same browse of folders, there was no problem, so I couldn't blame the G4 itself or the hard drives.
I suspect the Time Capsule router side is somehow not making allowances for the age and speed difference of the two machines on the network, or else is otherwise simply sick. Anyway, using an old LinkSys wireless router with the G4 and, with the help of hints and instructions here, keeping the Time Capsule as a hard drive only so my Time Machine backups can continue, seems to have solved my problem.
Once again, I can browse my archive hard drives to my heart's content and send several gigabytes worth of photo image files from the wireless laptop to the external hard drives served by the G4 and have no problem doing it. I am sure the official answer would have been to take the old G4 behind the barn and shoot it as it is now about 10 years old, but it is doing just fine as a base station server and it looks like it has a few more years yet to go.
I hope this helps someone with a similar problem.

Video: Nvidia Geforce 9600M GT
If you have a recent nVidia driver installed, you might want to check to see if you have either of these two modules loaded - check in the nVidia console:
PhysX, or 3D Stereovision. If you have them, definitely disable 3D Stereo, and test. If no improvement, disble PhysX and test.
Also, try adjusting your Hardware Acceleration. If Max, set to Min and test. If Min, set to Max and test. If either helps, try incrementing up, or down, until it no longer helps.
Last, check your OpenGL settings. If ON, turn OFF. If OFF, turn ON.
It appears that you have a laptop. Is that correct?
Good luck,
Hunt

Safari fixed with iTunes update?

Anybody notice the Safari problems improved or fixed with the recent iTunes 5.1 update? I have been surfing for an hour to sites that would cause a system freeze/crash. Since the iTunes update, Safari has not caused a freeze. Safari seems to load faster as well.

My point, JPolk, was that one should not assume anything when doing problem definition. The
similar issue
observation presumes that one is seeing the universe of Apple users on these forums - a fatally flawed conclusion. To extrapolate from posts here is roughly akin to going to a hospital and assuming everyone is sick in the world.
When and wherever a problem manifests itself is not an absolute pointer to a problem. It is most easy to 'blame' someone or something else, rather than tracking down what
b MAY
be a localized problem.
Barry

Is WiFi connection issue fix with IPAD3

Is WiFi connection / Dis Connection issue fix with IPAD3

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Hi um i have the ipod 5 and my computer seems to be fine with the wifi but when i pressed wifi and my wifi does not pop up it i put it on airplane mode reset the networks erased my safari history . and it still has not read my wireless internet ?

hi um i have the ipod 5 and my computer seems to be fine with the wifi but when i pressed wifi and my wifi does not pop up it i put it on airplane mode reset the networks erased my safari history . and it still has not read my wireless internet ?

If not:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem. A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
Then:
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

I just got an IPad and it seems to be interfering with my Iphone. Facetime doesnt work unless the other device is shut off. apps aren't syned. email doesn't some in quickly on the phone

i just got an IPad and it seems to be interfering with my Iphone. Facetime doesnt work unless the other device is shut off. apps aren't syned. email doesn't some in quickly on the phone

The machine could be repaired by a company that does circuit board re-soldering, since it is possible a heat-flex solder break on the main board may have caused either the processor or graphics chips to lose connection and that could manifest itself in a few somewhat documented ways.
There is an on-board RAM chip that may also have something to do with a kernel panic, if it no longer is functioning correctly; that is the non-removable one soldered on the board you never usually worry about.
Companies such as powerbookmedic, wegenermedia, and others can take in portable macs of vintage or newer (contact them for details on what they do, and how they accept work orders) for repair and can fix most anything; and have a parts inventory. Modern repair workstations allow the equipped service company to fix complex issues and they do troubleshooting. Sometimes the cost is less than a replacement logic board.
The links above may help isolate the general cause of a kernel panic. There are other articles in Support database including a deeper look into them.
•Technical Note TN2063: Understanding & Debugging Kernel Panics
https://developer.apple.com/library/mac/technotes/tn2063/_index.html
•Resolving Kernel Panics - The X Lab:
http://www.thexlab.com/faqs/kernelpanics.html
•Troubleshooting Kernel Panics:
http://www.thexlab.com/faqs/kernelpanics.html#Anchor-Troubleshooting-49575
Usually the issue is caused by hardware, especially if there is an indication of machine failure in the crash log or other screen image text.
A working last model MacBook (mid-2010) would be a better 'first mac' to have.
Hopefully you can sort it out.
If not, there likely are fair parts in it.
Good luck & happy computing!

I recently updated my Ipod Touch to the ios 6 and now, i cant seem to use it with my itunes! A notification keeps coming up whenever i connect my ipod to itunes that a new version of itunes is required but it is the latest version alrdy. HELP!

Hi all, I've recently updated my ipod touch to the ios 6 and now i cant seem to use it with my itunes
whenever i connect my ipod to itunes, a notification saying that i need a newer version of itunes. However, when i check itunes for software updates, it seems i have the current version of itunes
I am at a lost of what to do as i can no longer sync my ipod touch with my itunes.
Help Pls!
thanks

You might tell us many more things so we don't have to guess and might be able to help.
What computer do you have?
What iTunes are you running now?
What OS X system are you running are your computer now? Or is this a Windows machine?
Let us know a little more info.

HT1947 Can I control the volume of my MacBook Pro with the remote app on my IPhone or IPad?

Can I control the volume of my MacBook Pro with the remote app on my IPhone or IPad?

Welcome to the Apple Community.
To an extent yes. You can't control the master volume, but tou can turn the volume up and down, up to the maximum set manually on your computer.

I have my iPhone 4s backed up on my mac but it seems it was encrypted with a password which i do not remember is there any other option to retrieve to the backup without restoring the device as a new one. Also I do not have access to a windows system.

I have my iPhone 4s backed up on my mac but it seems it was encrypted with a password which i do not remember is there any other option to retrieve to the backup without restoring the device as a new one. Also I do not have access to a windows system.

Sorry no, if you don't knnow the encrypted password, then you can't use that backjup.

Volume seems to be fixed with 10.4.7

Similar Messages

Maybe you are looking for