Volume shuts down when connected with dock connector

When I plug my ipod into a portable speaker, the volume does not work and the volume bar goes away. I have tried resetting the ipod but it did not work

How are you connecting the iPod to the speaker?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem. Bring the speaker too,
Apple Retail Store - Genius Bar

Similar Messages

Ipod shuts down when connected to headphones

My ipod nano 6th gen shuts down when connected to headphones. Also, when i use the volume buttons, the speaker icon comes up, but volume does not change. Please help.

Read the PDF user manual for a possible solution: iPod Manuals and/or iPod Nano Support
iTunes & iPod Hints & Tips
Every iPod comes with complimentary, single-incident telephone technical support within 90 days of your iPod purchase.
If you also purchased AppleCare, then your warranty is extended for technical support and hardware coverage for two years from the original purchase date of your iPod.

MBP shuts down when connecting to power

Since a week or two, my MacBookPro from early 2011 shuts down when connecting the magsafe to power. Also when starting up again it will start up fine and fast from battery, but I need to hold the power button for several seconds when connected to power.
Another problem I had earlier as well is CPU (kernel task) of over 90%, which I now see clearly, only occurs when connected to power. I used to solve this problem by putting the MBP to sleep, but now, when put to sleep, it will shut down.
When on battery, I have no CPU problem and can put machine to sleep without a problem.
I recently started uploading everything to dropbox, and activate caffeine to make sure it will keep uploading. My computer will run for days on power combined with caffeine, but is as slow as **** because of a >90% CPU.
The battery has had a notification for maybe a year, that it needed service, so today I finally bought and installed a new battery, but the problem is not solved. Is this software or could it be my magsafe adapter? Thanks for you help.

It sounds like a problem with the power management inside your MBP. I suggest you call Apple to make an appointment at your local Apple store for them to check it out for you.

Problem = always shut down when connect to the internet (both via wifi & mobile data)

problem = always shut down when connect to the internet (both via wifi & mobile data) my problem is my phone (sony z1) regularly shut down automatically when connect to the internet (both via wifi & mobile data). it just happens after i downloaded and installed the latest available software (as following): Android version: Google Android 4.3 (Jelly Bean) Latest available software: 14.2.A.1.136 Release started: 2014-01-30 please suggest how to fix this problem.

I suggest you disable any battery savers or task killers if you have.Boot your phone in safe mode and see how it is:
http://talk.sonymobile.com/t5/FAQ/How-to-boot-your-phone-into-safe-mode/m-p/348008#U348008
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

X200 hangs during restart or shut down when connected to ultrabase

My X200 hangs during a Windows restart or shut down when I'm connected to my ultrabase. The laptop appears to go through most of the processes to restart/shut down but eventually hangs at a blue screen with unmoveable cursor (note, not a Windows BSOD). I'm forced to perform a hard shut down to turn off the laptop.
This hang at restart/shut down only occurs when I'm connected to the ultrabase.

Just as a thing to try, and this is assuming that you all have an integrated camera, please try this camera driver and let the board know the results:
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-70600

IP4 AUTO-SHUT DOWN WHEN CONNECTING TO WI-FI

Hi, fellow apple users, my name is ace, I'm from the phillippines. I ordered my Iphone from singapore, using a singapore address of a friend of mine and have it shipped there then delivered to me through Singpost here in the Philippines.
I Noticed that my Iphone 4 Automatically shut-down when it connects to a wi-fi or internet sharing while i'm in the office. Was this normal or there was a problem with my phone, Here is the serial number: 830**0A4T
<Edited by Host>

HI Ace,
Try here: Troubleshooting iPhone Hardware
Click: Connectivity / Network: Wi Fi issues
Carolyn

Laptop automatically shuts down when connect ipod PLZ HELP

Well basically my ipod 30gb video shuts down when i try to put a video or picture on it however when i put songs on its fine.

All I can offer is these list of solution steps, perhaps it's a software problem or you need to do a SMC or PRAM rest
Step by Step to fix your Mac

Auto shut-down when connecting USB-units (on some units..)

Hi there.. i just bought this mainboard :
MSI K9N Platinum, nForce 570 Ultra, DDR2, Socket-AM2,2xGbLAN,Firew, ATX, PCI-Ex16
Version :
MS-7250
I have read the "shut down" issues from the sticky topics in this forum, and i want to know if this is the same issue...
Here we go :
I have approx 3-4 connected usb units which works perfectly well..
- My 3Com OfficeConnect Wireless USB Adapter
- My wireless keyboard
- A usb memory stick..
These work perfectly well..
I also have a Lacie USB 2.0 External Harddrive which works ok enough sometimes.. but it's kinda unstable..
What doesn't work at all.. is my Sony Ericsson W950i when i connect it to _any_ usb port on my computer..
What happens :
When i insert the usb-cable into the phone.. and win xp (pro sp2) detects the phone, it immidiately shuts down the pc.
Sometimes i have to unplug the power cable for about... 20 seconds to get it to boot again at all.. but most times it's enough to boot as normal.
Is there _anything_ i can do to fix this ? ... or.. do i have to get a replacement motherboard (newer version)..
PS !!!
*I also tried to flash tie bios (the windows way), but after pressing the "start" button for flashing.. nothing happens.. nothing at all.. Weird
Any ideas on this is rewarded with a digital beer
Best regards
Terje.-..-

I'll provide some more (a LOT) of information..
It's part of the report from Everest Ultimate Edition...
I have read thorugh all the posts regarding the USB-trouble (which you linked).. but it's not the same problem as i have (atleast it doesn't seem so..)
I didn't connect anything to the 10'th pin (USBOC)..
--> https://forum-en.msi.com/index.php?topic=57472.0
As you see from this log.. some usb-units are already listed there.. and a lot of other usb units works perfectly well..
It's just a external harddrive, and my phone (both USB connectors) which shuts down my pc...
USB SETUP
--> THE USB-CONTROLLER (PCI)
[ nVIDIA nForce 570 Ultra (MCP55U) - EHCI USB 2.0 Controller ]
Device Properties:
Device Description nVIDIA nForce 570 Ultra (MCP55U) - EHCI USB 2.0 Controller
Bus Type PCI
Bus / Device / Function 0 / 2 / 1
Device ID 10DE-036D
Subsystem ID 1462-7250
Device Class 0C03 (USB Controller)
Revision A2
Fast Back-to-Back Transactions Supported, Disabled
[ nVIDIA nForce 570 Ultra (MCP55U) - OHCI USB 1.1 Controller ]
Device Properties:
Device Description nVIDIA nForce 570 Ultra (MCP55U) - OHCI USB 1.1 Controller
Bus Type PCI
Bus / Device / Function 0 / 2 / 0
Device ID 10DE-036C
Subsystem ID 1462-7250
Device Class 0C03 (USB Controller)
Revision A1
Fast Back-to-Back Transactions Supported, Disabled
Device Features:
66 MHz Operation Supported
Bus Mastering Enabled
USB Devices:
A727 6893 3Com OfficeConnect Wireless 108Mbps 11g USB Adapter
0451 2036 Generic USB Hub
046D C50C USB Composite Device
046D ABD0 USB Human Interface Device
046D C50C USB Human Interface Device
046D C50C USB Human Interface Device
Universal Serial Bus controllers:
Generic USB Hub 5.1.2600.0
Standard Enhanced PCI to USB Host Controller 5.1.2600.0
Standard OpenHCD USB Host Controller 5.1.2600.2180
USB Composite Device 5.1.2600.0
USB Root Hub 5.1.2600.2180
USB Root Hub 5.1.2600.2180
[ Universal Serial Bus controllers / Generic USB Hub ]
Device Properties:
Driver Description Generic USB Hub
Driver Date 01.07.2001
Driver Version 5.1.2600.0
Driver Provider Microsoft
INF File usb.inf
Hardware ID USB\Vid_0451&Pid_2036&Rev_0101
Location Information General Purpose USB Hub
[ Universal Serial Bus controllers / Standard Enhanced PCI to USB Host Controller ]
Device Properties:
Driver Description Standard Enhanced PCI to USB Host Controller
Driver Date 01.06.2002
Driver Version 5.1.2600.0
Driver Provider Microsoft
INF File usbport.inf
Hardware ID PCI\VEN_10DE&DEV_036D&SUBSYS_72501462&REV_A2
Location Information PCI bus 0, device 2, function 1
PCI Device nVIDIA nForce 570 Ultra (MCP55U) - EHCI USB 2.0 Controller
[ Universal Serial Bus controllers / USB Root Hub ]
Device Properties:
Driver Description USB Root Hub
Driver Date 01.07.2001
Driver Version 5.1.2600.2180
Driver Provider Microsoft
INF File usbport.inf
Hardware ID USB\ROOT_HUB20&VID10DE&PID036D&REV00A2
[ Universal Serial Bus controllers / USB Root Hub ]
Device Properties:
Driver Description USB Root Hub
Driver Date 01.07.2001
Driver Version 5.1.2600.2180
Driver Provider Microsoft
INF File usbport.inf
Hardware ID USB\ROOT_HUB&VID10DE&PID036C&REV00A1
IRQ 20 Shared Standard Enhanced PCI to USB Host Controller
IRQ 22 Shared Standard OpenHCD USB Host Controller
THIS APPEARED UNDER SYSTEM DEVICES (so it have detected it..)
[ System devices / Sony Ericsson Cable Emulation Bus ]
Device Properties:
Driver Description Sony Ericsson Cable Emulation Bus
Driver Date 31.05.2006
Driver Version 4.38.6.212
Driver Provider Sony Ericsson Mobile Communications AB
INF File oem14.inf
Hardware ID {3a4687c6-2342-48fb-a5b3-632baa20734b}
CPU
CPU Properties:
CPU Type DualCore AMD Athlon 64 X2, 2400 MHz (12 x 200) 4600+
CPU Alias Windsor-512
CPU Stepping BH-F2
Instruction Set x86, x86-64, MMX, 3DNow!, SSE, SSE2, SSE3
Original Clock [ TRIAL VERSION ]
Min / Max CPU Multiplier 4x / 12x
L1 Code Cache 64 KB per core (Parity)
L1 Data Cache [ TRIAL VERSION ]
L2 Cache 512 KB per core (On-Die, ECC, Full-Speed)
Multi CPU:
Motherboard ID nVidia MCP55
CPU #0 AMD Athlon(tm) 64 X2 Dual Core Processor 4600+, 2412 MHz
CPU #1 AMD Athlon(tm) 64 X2 Dual Core Processor 4600+, 2412 MHz
CPU Physical Info:
Package Type 940 Pin uOPGA
Package Size 4.00 cm x 4.00 cm
Transistors [ TRIAL VERSION ] million
Process Technology 90 nm, CMOS, Cu, SOI
Die Size [ TRIAL VERSION ] mm2
Core Voltage 1.100 - 1.400 V
I/O Voltage 1.2 V + 2.5 V
Motherboard
Motherboard Properties:
Motherboard ID 63-0100-000001-00101111-051806-OPTERON$1ADGH004_M2N PLATINUM A7250NMS V1.10 05/18/06
Motherboard Name MSI K9N Platinum (MS-7250)
Front Side Bus Properties:
Bus Type AMD Hammer
Real Clock 200 MHz
Effective Clock 200 MHz
HyperTransport Clock [ TRIAL VERSION ]
Memory Bus Properties:
Bus Type DDR2 SDRAM
Bus Width 64-bit
DRAM:FSB Ratio CPU/8
Real Clock 302 MHz (DDR)
Effective Clock 603 MHz
Bandwidth [ TRIAL VERSION ] MB/s
Motherboard Physical Info:
CPU Sockets/Slots 1 Socket AM2
Expansion Slots [ TRIAL VERSION ]
RAM Slots 4 DDR2 DIMM
Integrated Devices Audio, Dual Gigabit LAN, IEEE-1394
Form Factor ATX
Motherboard Size 240 mm x 300 mm
Motherboard Chipset nForce570Ultra
Extra Features [ TRIAL VERSION ]
Motherboard Manufacturer:
Company Name Micro-Star International
Product Information http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_list.php
BIOS Download http://www.msi.com.tw/program/support/bios/bos/spt_bos_list.php
Chipset
[ North Bridge: AMD Hammer DDR2 IMC ]
BIOS
BIOS Properties:
BIOS Type AMI
System BIOS Date 05/18/06
Video BIOS Date 10/24/06
BIOS Manufacturer:
Company Name American Megatrends Inc.
Product Information http://www.ami.com/amibios
BIOS Upgrades http://www.esupport.com/biosagent/index.cfm?refererid=40
OTHER
Display adapters:
NVIDIA GeForce 8800 GTS 6.14.10.9744
SCSI and RAID controllers:
HPT302 UDMA/ATA133 Controller 1.22.0.0
VAXSCSI Controller 5.1.2600.2180
Universal Serial Bus controllers:
Generic USB Hub 5.1.2600.0
Standard Enhanced PCI to USB Host Controller 5.1.2600.0
Standard OpenHCD USB Host Controller 5.1.2600.2180
USB Composite Device 5.1.2600.0
USB Root Hub 5.1.2600.2180
USB Root Hub 5.1.2600.2180

Cannot sleep or shut down when connected to TV through DVI

I recently reinvigorated my 2003 Power Mac G5 (Power PC) with a clean install of OSX Leopard and connected it to my TV via a VGA cable and DVI adapter. I soon discovered the computer would not sleep or shut down with the TV connected:
- Selecting "sleep" from apple menu, OR
- Pressing sleep button on original ADC monitor (with both monitors connected,) OR
- Waiting for 15 minute automatic sleep mode:
computer sleeps (tower clicks off as normal) but immediately wakes again
- Selecting "shut down" from apple menu:
computer shuts down completely but immediately reboots
When the G5 runs on only the original monitor, sleep and shutdown commands work as expected.
Aside from unplugging the DVI adapter every time I want to sleep or shut down, is there a solution to this problem?

I've seen the TV problem before, not sure there is a cure, but perhaps one of these...
http://www.pccables.com/cgi-bin/orders6.cgi?action=Showitem&id=ID15122041&partno =30011&search=VGA_SWITCH&rsite=&rcode=
The DVI ones don't have high enough resolution...
http://www.pccables.com/cgi-bin/orders6.cgi?action=Showitem&id=ID15122044&partno =81112&search=DVI_SWITCH&rsite=google.comsearc&rcode=

2011 MBP shuts down when connected to external display

I've been using my 2011 15" MBP for about a week now with no problem until today when I tried to connect it to my old 20" cinema display. I have the mini display port hooked up to the dvi adapter and a usb connection hooked up to external keyboard and mouse. Everything works just fine if I keep the lid up on the MBP, but if I shut the lid, the MBP shuts down. Down, not that the big screen goes black & then comes on again. It turns itself off.
Any way I can avoid a trip to the Apple store? In the past, the "geniuses" knew less about external displays than I did. Is there an issue because of the dual graphics cards?

no - I realized later that the machine doesn't shut off it just acts like it. The hard drive stops spinning & the screen remains black no matter what I do. This doesn't happen when I just shut the lid & then go back to working on it.
Then if I shut it again & try to get the monitor to respond, I get a blue screen of death color with a two inch band of blue noise along the left side. Very weird.

Computer shuts down when connect FW 400 device

I have a PowerMac G4 dual 1,25 FW800, 1Gb ram and OS 10.4.3.
When I connect a Mcally Firewire 400 hub the computer shuts down immediately.
It does the same thing when I connect a Delkin FW Compact Flash card reader.
I tried different cables on both FW ports.
The devices work well on Powerbook.
Also, I succesfully connect a printer and a LaCie HD to the FW ports of the PowerMac.
Can anyone suggest what the problem might be?
Thank you,
Francesco Tonell

Thanks Ryan
Attached to the PowerMac I have 2 LaCie 500Gb FW800 each with thier power supply + 1 LaCie Mobile 80Gb FW400 without any power supply + and Espon R2400 FW400.
If I conncet my FW400 card reader with any of the two FW400 ports the PowerMac shuts down immediately.
But I found a small workaround. If I connect the FW400 card reader to my LaCie 80Gb and then the LaCie 80Gb to the PowerMac it works fine.
Francesco

BlackBerry Desktop Software shuts down when connecting secondary device

All,
I have a main and a secondary phone (used for local SIM when traveling abroad)
After I backup my main device I connect my secondary device to be able to "Restore" and have all my contacts sync on both, but alas, once the secondary device is trying to connect the Desktop Software just shuts down without giving any error
The Backup process itself works great
I use the same cable, same USB Port, both devices have a charged battery and work great on a day to day basis
Main Device: BlackBerry 9900
Secondary Device: BlackBerry 9870
Desktop Software Version: 7.0.0.59 (May 16, 2012 Bundle 60)
Laptop OS: Windows XP Professional SP3
Thanks

I'm not familiar with this particular package, but with similar packages from other carriers there's usually a setting that lets the program control your Network - it may only say Wi-Fi.
The BlackBerry drivers include a Dial-Up connection which is probably getting shut down by the software which kills Desktop Manager.
If you turn off that option, the problem should go away (reboot probably a good idea).
Jerry

PC breaks down when connecting with iPhone

For about 2 weeks my PC breaks down whenever I try to connect with iPhone. A blue screen appears and it shuts down immediately. After restart the same happens again. Can anyone help me?

Hi Diana,
Does your PC have software for a Logitech QuickCam/Webcam, Lexmark scanners, or a built-in media card reader?
If it does try uninstalling the software from Control Panel, then testing and downloading the latest software/drivers available, as described here: http://support.apple.com/kb/TS1502
-Jason

IPod shuts down when connected to iTunes

My fully charged iPod shuts down within 1 minute of connecting to iTunes. iTunes recognizes/reads the iPod until the iPod shuts down. I considered the battery but the iPod will play about 6 hours on a charge. This happened with the old iTunes software and also after I installed the new 7.0.2 yesterday.

Welcome to Apple Discussions!
Is the software on the iPod up to date too?
Have you tried connecting via a different USB port?
Also, try resetting the iPod while it is connected to the computer...
Reset iPod
btabz

Itunes shuts down when connecting Ipod HELP

Recently when I connect my Ipod to my Itunes a windows error message appears and shuts down itunes for me. The message reads that Itunes has encountered a problem and needs to shut down. I am unable to transfer any music, play songs off my ipod, or delete songs off my ipod. I have reinstalled Itunes several times. All of my songs are stored on my IPOD only so reseting would erase all of them. PLEASE HELP!!!

Yes this used to happen to me also. Heres how to fix it. If this event just started happening after you have downloaded new music, I know how to fix it. Sort your iTunes by DATE ADDED. Then start clicking on the songs or videos, etc. in order from top down. When you click on a certain one(s) and iTunes shuts down, this is what you do:
1. Find the file(s) on your computer by doing a computer search from the start menu.
2. When you locate the file(s), click on it or them and send them into your recycle bin or trash for mac users.
3. Then open iTunes.
4. Locate the file(s).
5. They should have a little ! next to them.
6. When you click on them, iTunes won't shut down.
7. Just right click on the file(s) and delete them again, this time from iTunes.
8. Reset your iPod.
9. Connect it.
10. Your problem is solved!

Volume shuts down when connected with dock connector

Similar Messages

Maybe you are looking for