Volume slider/icons and in fact, sound goes away randomly.

Well, yes. Sudonly the sounds goes away. And the volume slider and any sound related icons are gone too. Restart...nothing happens. Updated iOS, Restored IPOD, Put it back to factory default, etc. No luck. Any ideas??? Thanks!

Sounds like a hardware issue on the logic board.
Basic troubleshooting steps  
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

Similar Messages

  • My itouch won't turn on. All that shows is the apple icon and then the screen goes blue to white. Is there a way to fix this or is my itouch unfixable? HELP ME!!!

    My itouch won't turn on. All that shows is the apple icon and then the screen goes blue to white. Is there a way to fix this or is my itouch unfixable? HELP ME!!!

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

  • This is making me really mad I have an iPhone 4s and all off a sudden the volume slider disappeared and now it won't let me turn up my volume I have reset restored done the tooth brush trick blew into it and everything an it still wont work someone help!!

    This is making me really mad I have an iPhone 4s and all off a sudden the volume slider disappeared and now it won't let me turn up my volume I have reset restored done the tooth brush trick blew into it and everything an it still wont work someone help!!

    Is that the only solution? This just happened to me last night and I though that maybe it was just acting up and it would be fine this morning but it wasnt..

  • When I tap a photo in my iPhone photo gallery, the photo appears but there is always a "this movie format not supported" alert and then the alert goes away and the photo appears. These are photos I've taken with the iPhone and aren't even movies.

    It's very odd. I take photos with my iPhone and then later go to view the photos in the Photo Gallery on my iPhone. The photos to appear, but I keep getting "this movie format not supported" alerts, even though I am looking at photos taken by my iPhone. The alert appears briefly just after the photo appears and then the alert goes away and I can see the photo. They are just still photos and not movies. Why wouldn't the iPhone recognize the format of photos it is taking?

    That thread helped for a time.  But now it seems as though my computer is back to slow again.  But, some of the jargon is over my head as well.  Not sure I knew quoite everything they were talking about.  But thanks a lot for that, it helped I probably just need to reread it and follow the instructions again.  Thanks so much.

  • I have an I phone 4 and since I upgrade to the lastest ios  6.1.3 , my volume slider is missing. The sound works when but I can't mute or turn up or turn down the volume. I've tried a hard reset , reboot, blowing air in the dock and earrplug jack. :-(

    I tried almost evrything to restore my volume slider( + & - ). My phone rings, plays music and every other sound but I can't mute or put  the volume up r down with the side buttons.. My volume slider bar is missing. This is only simce I upgraded to iso 6.1.3 .. What's with that?? I figured out how to manually  mute the phone through (General, Accessibitily) by muting the bell for sound and unmuting the bell for silent mode. But what a freaken pain, when you have to take all those extra steps to turn your volume up or down or  mute your Iphone??
    We have no Apple Store here so no luck to bring it in to get looked at.. Please , does anyone out there know what else I coold do???
    Cheers

    Does it work with headphones plugged in?  That is typically the culprit, the device mistakenly believes that a pair of headphones are plugged in.

  • Volume of microphone button inaudible when pressed when overall volume on high and all other sounds/ringer/alert volume working fine! Is there a way to fix this? Was working fine yesterday.

    Hello, the volume of my microphone button in text messages is inaudible when pressed, even when my overall volume is on high and all other sounds/ringer/alerts volume are working fine! Is there a way to fix this? Was working fine yesterday. I've tried rebooting and turning Siri on and off, and can't think of what else to do. All googling results in posts about the mic not recording sound loud enough or not working. My mic works just fine; it does the job of recording, but I want the chime to be loud so I don't have to look at the screen to know when I can speak; I like to hear the chime to alert me. Any help is appreciated!
    iPhone 4s, iOS 6

    stewa348 wrote:
    I agree with you about the volume on the phone itself. (I have 3Gs). It needs to be louder. I also wear hearing aids. However I do think there may be something wrong with your phone because when I connect my earbuds (Klipsh) I get very good volume through them. In fact at full volume it's way too loud. I would push for a replacement phone.
    FWIW, my daughter (who also wears hearing aids) has trouble hearing her iphone. It appears to have more to do with the speaker not being lined up with the hearing aid's input. Her audiologist pointed out that some current hearing aids support bluetooth, I think we will get those next time we replace her hearing aids.

  • Nokia 5800 volume slider icon problem

    Hello everyone I have just bought this phone a couple of days ago and have noticed that when i use the volume keys anywhere else other than when playing music or video back, the volume indicator is nowhere to be seen, the keys still work its just I cant see the slider go up and down . Ive restored my phone to factory settings, reloaded the firmware and still no luck, I did download 1 or 2 themes for it , could that have an effect , thanx in advance
                                                                                                                Cheers ! 

    Just tried it on my 5800 and you don't see the volume slider in web, opera etc but the volume adjustment is made. You do see the volume slider in the music or video apps though.
    When you use the supplied headphone accessory with the music controls on it and advance the track, you will see a brief scroller on the screen telling you what track you are now listening too. The volume display doesn't come up though.
    It doesn't bother me too much at all as I can hear that the volume has been changed.
    If my post has helped you in anyway, please press the 'kudos' button.
    Thanks

  • Software Center icon in system tray never goes away

    Hi
    We are in the process of migrating sccm 2007 to 2012 and noticed the Software Center icon sits in the system tray and never goes away. The system does not have new software available for awhile and the system was also rebooted. We are seeing this on many
    machines. What is the expected behavior? I have attached an image.
    This never goes away.  

    open the software center and look for any applications made available in 'available software' tab. You can hide this window by disabling the setting from Client Settings: Computer Agent\Show notifications for new deployments = "False".
    You can also configure the User Experience\User Notifications configuration setting for the app deployment to "Display in Software Center, and only show notifications for computer restarts".
    Eswar Koneti | Configmgr blog:
    www.eskonr.com | Linkedin: Eswar Koneti
    | Twitter: eskonr

  • When Charging my Iphone 5's volume and sound goes away

    Sometimes it will come back, but usually the option for volume changes go away.

    Howdy kimckay,
    I found a resource to help troubleshoot what may be going on with the camera. Its from our article named iPhone: Hardware troubleshooting found here http://support.apple.com/kb/ts2802.
    Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
    Third-party cases can interfere with the autofocus/exposure feature and the flash (iPhone 4 only); try removing the case if you have image-quality issues with photos.
    Try turning iPhone off and then back on.
    Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
    And
    If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
    If the issue still persists then I would recommend backing up and restoring the iPhone. If the previous troubleshooting does not resolve it, then this will if it is a software issue.
    All the very best,
    Sterling

  • Realtek HD Audio - Sound goes away and speakers crackle.

    Has anyone found a solution to this yet. I've tried everything that anyone has mentioned regarding losing my sound. I've installed drivers from HP's site and from Realtek's. I've tried running the sound troubleshooter. I've enabled onboard audio from the BIOS settings. Nothing has worked. Is this a conflict with Windows 7?
    http://twitter.com/cthemenway

    Has anyone found a solution to this yet. I cannot figure out what's going on with my audio. It appears that the Realtek Hardware manager will sometimes recognize that the speakers are plugged in and sometimes won't. Sometimes it notifies me that they are plugged in, and then 1 second later says that they aren't. Then it keeps doing that back and forth until I close the message. I've tried everything I can think of, and all suggestions I've been given. Will buying an external sound card be the best solution at this point?
    http://twitter.com/cthemenway

  • Iphone 5 talking on the phone on speaker and all at once the sound goes away only way to get sound now is with headphones

    talking on iphone 5, 7.1.1 version.  during conversation the sound cut off.  the phone will not ring nor will it play music unless headphones are now pluged in.

    Hello bspcap
    If you are having issues with sound on your iPhone, then check out the article below to resolve the issue.
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    Regards,
    -Norm G.

  • Text message sound going off randomly

    The sound of an incoming text message is constantly going off on my phone. I am not receiving new messages. I checked and it does not appear to be my other apps. Any ideas?

    text message sound file

  • I can't find my windows HD icon and my MB has shut down randomly

    Hi everybody!
    I am an new Mac user from Hong Kong. I bought this MB around 20 of May, then installed the Boop Camp and everythings keep going good. However, the nightmare was came 2 weeks ago.
    My MB randomly shutted down at lease 4 to 6 times, but I could stand that because it wasn't serious for me. OK...the problem is here...now my MB lost my windows partition!
    The windows icon used to show on the desk, but I haven't seen it any more. I try to search it in the computer but found nothing, then I was going to restart my computer and pressing the option key to chose the windows partition, but once again it shutted down. Once, it did run around 10 seconds and showed loading the windows XP but it shutted down again.
    Can anyone tell me what should I do? Should I bring it to the Applecare? But the problem is related to Boomcamp, so will they assist this issue for me? Is it means I lost all of the files in the Windows Partition?
    A thousand thanks to all you guys!
    MacBook   Mac OS X (10.4.6)   1 Gig Ram and 80 Gig HD

    This random issue of shutting down isn't isolated to Boot Camp. It's a hardware issue that needs to be addressed with AppleCare. So yes you should take it to them. It's possible that the drive losing power multiple times may have affected the drive and messed up your partition information.
    I'd try booting with the OS X install disc 1 in the drive and holding down C. Once it's loaded, chose the drop down menu Utilities > Disk Utility and run the option to "repair disk". See if that helps any.
    Nick

  • Launch Multi-Camera Monitor - Sound goes away

    Hi,
    I've been re-trying this for two days - and can not, for the live of me, figure out what is happening.  I have started from clips in a new folder and re-building the project from scratch - no joy (old Navy term).  The thing that is frustrating to me - is I've done this before and everything worked fine.
    I realize you-all are quite precise,  so here is my process:
    I have a sequence where I have the clips from two cameras and they are syncronized (using Plural Eyes)
    I have extracted .WAV files in Audo 1  and 2 (linked to video 1) and Audio 3 and 4 (linked to Video 2) -  (I did a render and replace)
    I create a new sequence
    from the project window - I drag the synced sequence to this new sequence - it becomes nested - (I have sound - everything is great) 
    In the Nested sequence I select and rightclick the clip and select Mulit Camera >> Enabled and the title of the sequence gets a new prefix [MC1] -  (I have sound - everything is great on the entire sequence)
    THEN - on the Menu Bar - I click Window>>Multi-Camera Monitor - the Sound disappears. 
    Results:
    This sound should be coming from Video 2  and it's link to Audio 3 and 4 - But no deal......  It is soundless when looking from both the Multi-Camera Monitor and the Program Monitor.  If I move further in the sequence where Video 1 happenes to be playing (Audio 1 and 2) - I have sound again.
    As a note: If I go back to the original synced sequence - everything seems normal - I have sound through-out the sequence.
    Question:
    What happended to the audio (3 and 4) in the nested sequence?
    Thanks,
    Chris

    This morning - I took a new look at theMulit-camera Monitor - and found a new button hiding on the bottom of the screen - I needed to select the audio
    This fixes my problem
    Sorry for the Alert!
    Chris

  • I upgraded to Mavericks and my iMac monitor goes black randomly, but my attached cinema monitor stays active. I can fix it by putting it to sleep and waking it up again. But often it happens immediately after.

    I have a 30in cinema display attached to my iMac and the iMac screen randomly goes black while the cinema stays active. I can put it to sleep and log back in which fixes it, but often it happens again immediately after. Sometimes it happens so quickly I can't even finishing logging in! I'd like to know if this is a Mavericks issue and I will roll my machine back. Thank you!

    RocknOats
    Wanted to update you on my situation with this.
    So far 8 hours have gone by and I have not had a screen blackout.
    FIRST I did the Hardware Test. TWICE on the extended test, the instructions on the KB Article explain. It took almost 3 hours, but while the test was running, both times, my computer screen did not go black.
    I did get an error message, both times. Different each time. I looked up both of the error messages on discussion boards. Lots of conflicting info
    One good thread said my first error was that my hard drive was bad and would probably fail.
    The next error message I researched said that a fan was bad or needed replacement.
    (information comes from other folks on discussion boards, not from Apple or technician)
    Not sure what exactly those 2 error messages indicate but I followed a thread where someone found a solution by doing the following. So far it's worked.
    After Hardware Test I did a shutdown and an SMC resest. Unplugged computer power source from wall and computer for about 10 minutes.
    Finally after a restart  I downloaded "SMC Fan Control" (CNET Downloads has a nice safe copy you can download)
    There is a temperature monitor and from what I've read so far, keeping the CPU temperature under 50˚C is ideal. Making sure your fans and computer is in a well ventilated area/room too of course.
    The SMC Fan Control helps you set your own speeds on the fans and so far everything has been going normal.

Maybe you are looking for