Volume Slider in Sound Settings Keeps Changing!

I usually keep the volume slider in settings/sound at max so I can hear the ringer when I have it on. I always did this with my original iphone and I had no problems with this. With the new phone every time I set the slider to max it will revert back to about 2/3 the way across. It does this every time I put the phone to sleep and then reawaken it, every time I take or make a call, essentially every time I do anything after exiting the settings feature. I have done the reset by holding the top button along with the Home button until the Apple logo appears and this doesn't help either. Has anyone else seen this or have a solution?
John

I just noticed this on my wife's iphone which was my original iphone that has been updated with the new software. I'm thinking it has something to do with the new software, that phone never did that with me prior to all this.
John

Similar Messages

Sound Preferences keep changing

Hello! I had purchased a Blue Yeti microphone, and i had change all my sound settings. After a while, my sounds settings keep changing by them selves! Anyone know how to fix this problem? It's really annoying!

Have you tried a PRAM reset?
http://support.apple.com/kb/ht1379

My volume slide on my itouch keeps sliding down to silent???

my volume slide on my itouch keeps sliding down to silent???

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears. Done
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Flash Player preference settings keep changing

Under System Preferences, my Flash Player settings keep changing every so often (every few weeks or so), in the Storage, Camera and Mic and Playback tabs.
I have all three tabs set to Block and the settings change to Allow or Ask me.
Why is this happening and what can I do to stop it?
Thanks in advance for any help.

This solved my problem partially, all I want is that Firefox keeps my Flash saves while I clear the history log.
Your way works too, now, instead of clearing the history log through the browser, I use CCleaner.

Font settings keep changing when I restart Mail

I've noticed over the past few days that whenever I restart Mail, my font settings keep changing, so I have to keep going back in and adjusting them.
Anyone else having this problem, or know how to fix it?
I did a search in this forum, but didn't see anything about this.
Thanks!

I should clarify that this happens after I restart my computer, then open Mail. If I close Mail, then reopen it, without restarting, then this does not happen.

How to Turn Off Pavillion DV 7 Volume Slider Clicking Sounds

How can you turn off the annoying Audio Volume Slider clicking sounds when you increase or decrease volume on the Pavillion laptop? I couldn't find a setting in Windows 7..

I have the same issue. Have you ever found a solution?

Since the latest software update, every third or so time I turn it on, my sounds settings are changed and I cannot listen to anything-music, YouTube, nothing. I can sometimes change something and it will work, but right now nothing is working. Anyone else

Since latest software update, my sound settings are changing sometimes when I turn on and cannot hear anything. All controls are useless and cannot be activated. After changing several things, I have been able to make it work, but today nothing is working. Anyone else experience this and have any ideas?

Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Fiddling with volume slider and sound quality

In an attempt to bypass the infamous volume cap that plagues iPods sold in the EU, in the past I fiddled with the volume slider of many of my MP3 tracks, either directly or via third party applications (such as euPod). Afterwards I have changed my mind and reset the slider.
Later on, I have read a few sources claiming that the above procedure would cause a permanent modification of the MP3 file and/or affect sound quality.
I am somewhat puzzled by such claims... Am I really better off re-ripping all those tracks? Can anyone point me towards an undisputed “truth” on this matter?

The third one is a hardware issue: The earbuds jack
is very loose. Apparently, the iPod automatically
pauses playback when the headphones are disconnected.
Hence, I only have to wiggle the connector a bit and
the nano stops playing. This really would be annoying
if I were to go jogging with my iPod ...
hmmm.. that happens to my ipod too and i only got it for christmas. so i was a bit gentle with it.so hence it comes out very easily.
but whilst reading all the replys i decided to be harsher to my ipod and just push my earbuds in all the way..it worked!! that might be the same for u or i might have just been a bit too forgetfull and thought that my ipod was delicate coz its like.. so preety:)
lol im in love with my ipod ..
dont know if this helps..hope it does..
Windows XP

My notification settings keep changing on my exchange email account.

For some reason, the notification settings on my work email account keep getting changed without my knowledge. I have it setup to alert me with a banner, in the notification center and on the lock screen. However, twice in the last 5 weeks this has changed so I only have the badge app icon, no other notifications.
How can these settings just change like that, and how do I keep them consistent going forward?
Thanks.

For some reason, the notification settings on my work email account keep getting changed without my knowledge. I have it setup to alert me with a banner, in the notification center and on the lock screen. However, twice in the last 5 weeks this has changed so I only have the badge app icon, no other notifications.
How can these settings just change like that, and how do I keep them consistent going forward?
Thanks.

Sound output: keeps changing from internal speakers to Apple TV

My iMac keeps changing the soudn output from internal speakers to Apple TV. Why. This makes it a pain. Eveytime I use the iMAc, I have to go into preferences>sound>output and switch to internal speakers. Any ideas how to stop this form happeneing?
Thanks!

If you use LogMeIn, it is their sound driver. I'm having identical problem and it started after using LogMeIn.
See this page;
http://community.logmein.com/t5/Free/Mac-restore-defaul-sound-output-device-on-d isconnect/m-p/88522/highlight/false#M8093

Service settings keep changing?????

I have digital voice and someone keeps changing my settings on the services I have. Is this your programmers or someone who is making changes?
Example: I have simultaneous ring turned on for my home office line and somehow it keeps getting turned off without me logging in.
Please fix this or I will have to seek better service.

If you have invested a lot of money into your computer system etc, I suggest that you take it to a dealer like Comp USA, Best Buy, C.City etc. It’s possible that you have many issues affecting your computer operation.
To my knowledge there are no known issues with Itunes that causes the problem's you mention!
I don’t think this is the best forum or Itunes catagory to resolve what could be complex computer problems.
That’s why when you purchase the computer you should have a warranty and or Technical Support included for issues you may have.
The reason I mention Virus is because you have to start somewhere, and with the little info you gave out, that’s where I thought you should start.
To Contact Apple Tech-Support call – 1800-275-2273. Good Luck!!!
Compaq PC / 1GB Ipod Nano & 80GB Video Windows XP Pent 2.53 GHZ 512MHZ MB RAM 120GB HD

SB settings keep changing: solut

Ive figured out that when my THX settings for SB Audiligy 2ZS Platinum were continously reverting to default after I set it.......... That it wouldnt accept my own customized settings for Speaker Calibration. If you use the arrow buttons more/less to adjust the settings......it stays and doesnt keep changing...the only problem is that you can't have the exact settings you want........the arrow buttons change the values in increments....So the only thing you can do.. is have it set to the closest increment to the value you want. Also the surround mixer settings will get set to the closet preset increment to the value chosen. For example... I set the bass to 45%.....the closest preset, it seems, is 43% so it stays at 43 and doesnt keep changing after that. All these complications are awfully crazy and annoying for a card that costs $00+. It's weird because my previous SB Li've! card did not have any of these issues. Feel free to add to this post with any experiences, tips, tweaks you may have encountered with this definitely problematic card. It would be great if Creative could come up with a fix for all these quirks in their software. I ve tried everything to solve these problems including the recommended Cleansweep procedure.

its got nothing to do with that its the poorly programmed software.
You will have to hope and pray for a fix, but be prepared to wait possibly 4 years + , look for a fix for the bass redirection issue fix that has been a long awaited fix.
Message Edited by 00db on 0-29-2005 08:38 PM

Table Format order and visibility in Form Settings keeps changing

Dear Experts,
We are facing a concurrent problem where there is constant change in the table format of the form settings in marketing documents.
The columns order keeps changing and also the visibility box which will be ticked, becomes again unticked the next day for particular columns which are used.
Event though it is set one time in manager login and locked the doc settings for other end users. The format keeps changing.
It has to be set dially manually. Is there a permanent solution for it .
Please let me know . Please find the attached pic for it.Its SAP B1 8.82 PL6

Hi,
Please check this thread:
http://scn.sap.com/message/7377186#7377186
Check SAP note for changing form settings:
1062635 - Can I block a user from having access to Form
Settings?
Thanks & Regards,
Nagarajan

Settings keep changing themselves

Minor settings keep tweaking themselves, such as I will make the podcast app "oldest to newest" however anytime I go out of the app then back in it becomes newest to oldest, and sometimes completely ignores my setting all together. I've got newest stuff on top. I suppose the simple solution would be to simply live with it. However its other settings as well, like the music app, it keeps going to the artist search screen sometimes while I'm trying to scroll down an album I am listening to. It's very annoying, is there something I can do to fix this?

That is a well know bug. I'm not sure of what the logic behind this procedure, but actual responses from users who tried it confirm that it works. Please switch your status to offline for at least a minute, then switch back to online. Then change your privacy settings to see if they will stick this time.
CONTACT SKYPE CUSTOMER SERVICE | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUPICIOUS CALLS AND MESSAGES | WINDOWS PROBLEMS TROUBLESHOOTING | SKYPE DOWNLOAD LINKS
MORE TIPS, TRICKS AND UPDATES AT
skypefordummies.blogspot.com

My Safari v5.0.5cookie settings keep changing

My Safari Cookie setting keep changing randomly it seems, I set them to (Only site I visit) look back later and they will have changed to one of the other settings, I have tried trashing the safari pref file and it still happens, anyone else seeing this behaviour?

You might like Safari Cookies manager.
http://www.apple.com/downloads/macosx/internet_utilities/safaricookies.html

Volume Slider in Sound Settings Keeps Changing!

Similar Messages

Maybe you are looking for