Volume slider won't work after app installation.

Dear all,
I have tried to search for this topic but as I’m not sure what is happening, it is hard to pinpoint the topic. PLEASE RE DIRECT if possible.
I have recently installed 2 applications to my IPhone 3Gs (separate installation days) and since then each time I use the installed app, I can’t use the volume slider on my IPhone's IPod?
It will randomly turn loud then quiet and if I use my finger to on the slider it returns to its starting position when I let go??
I have tried uninstalling the applications in question and re-installing them via my laptop and even tried downloading them via both 3G and WiFi but still have the same effect.
P.S. I have a video of this happening if that would help and it also works fine if I restart the phone but as soon as I use the apps again I’m back to square one. I would just stop using them but one is Real Football 10 which I paid £3.99
I have even raised a report on the two applications via the app store but have been told to restore phone to factory settings and see if that works? (I haven’t tried this as it is my last resort)
Can anyone help me with this??
Much appreciated
SanderCh
Message was edited by: SanderCh
Message was edited by: SanderCh

my little piece of advice is to remove your said app from your iphone/ipod and wait for their update which I hope will fix this issue.
I have had this problem from one of the app from clickgamers which I installed that triggered my volume slider,no choice but to remove them from my iphone/ipod and my gadget back to normal,just to bad I can't play my favorite game anymore unless they do the update to fix the issue

Similar Messages

  • Oracle password won't work after fresh installation

    I've just installed 10g and tried to connect to SQL*PLUS and EM. I have the default password as oracle and username oracle on the system. No idea why I can't log in since Oracle never gave me the option on the basic installation.
    Any ideas?

    There is no default password in 10g.
    You should use the password you specified during installation, if you don't remember try the following from your command line.
    C:\SQLPLUS /NOLOG
    SQL*Plus: Release 10.1.0.4.2 - Production on Tue Mar 27 17:03:53 2007
    Copyright (c) 1982, 2005, Oracle.  All rights reserved.
    SQL> CONN / AS SYSDBA
    Connected.
    SQL>
    SQL>ALTER USER <username> IDENTIFIED BY <password>The same concept work on UNIX platform too
    Regards,
    Tony
    Message was edited by:
    Tony Garabedian

  • When unlocking my iphone with the camera slide, my volume controls won't work on video playbacks.  However, if I unlock the phone normally and open the camera roll I am able to watch my videos and control the volume.  Anyone else notice this?

    When unlocking my iphone 5 with the camera slide, my volume controls won't work on video playbacks.  However, if I unlock the phone normally and open the camera roll I am able to watch my videos with the control of the volume.  Anyone else notice this?
    Thank you.

    Who can help me what are the symbols of a moon and a lock with a partial circle around it not allowing me to turn on or off my phone

  • Imessage doesn't work after the installation of the update 6.0

    imessage doesn't work after the installation of the update 6.0

    iMessage will not work until it's activated.
    Switch iMessage OFF. Double tap Home button and delete Messages in multitask-bar.
    Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears, ignore the Slide to Power Off that appears)
    Note: You will not lose any data.
    Switch iMessage back ON.

  • Mission Control won't work after sleeping.  Upon Start up it's fine, but after sleeping it won't work by track pad or keyboard.

    Since updating, Mission Control won't work after sleeping.  Upon Start up it's fine, but after sleeping it won't work by trackpad or keyboard. I'm sure I use Mission Control more than most, so it's really irritating for me.

    No, the versions of iPhoto on the iPad and on OS X are totally different.
    What Apple ID are you using for the Mac App Store? Who else has access to that Apple ID, or what possible other Apple IDs could be in use? It's possible you'll need to purchase iPhoto to get the upgrade, though I'd think Software Update should offer you the correct version.

  • ICloud email won't work after upgrade

    iCloud email won't work after upgrade to Mountain Lion.  Says pop 3 server is timing out. Solutions?

    I'm sorry, as I keep saying... in MAIL I get the message that it cannot cannot to server!? Did you read the initial problem at all! I know exactly where mail is, although, the diagram was wonderful.
    My problem is TWO FOLD.
    The MAIL app doesn't work with iCloud but does work with my POP3 email for my office.
    Second problem is the iCloud on Safari doesn't work as I get the error message as the screenshot above.
    There is NO reason why the @me.com email shouldn't work through the iCloud site, as you can see, there is a also a Mail icon.

  • My ipod touch has an "activation required" error and the slider won`t work

    I have an itouch that is only 2.5yrs old and only gets occassional use.  A week ago the slider wouldn't work; power switch didn't work; I reset and then tried (unsuccessfully) to restore to factory settings through itunes but encountered an error.  At that point it appeared to be restored and I had use of original feature (clock, settings, etc) but I could not connect to WiFi and when I tried to connect to itunes again it did not recognize my device and now my Windows does not recognize my device.  It tried to reset again but now I get an "activation required" error and the slider won`t work again.
    I have read of other with the same problem but found no solution
    Any help is greatly appreciated,
    Thanks

    Next try thge remaining items of
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Head phone volume controls are not working after updating to ios 6.1 y?

    head phone volume controls are not working after updating to ios 6.1 y?

    I have tried my head phone with other iphone still the same problem may be my head phones has been not working need to chek my iphone with other head phones which are working

  • External keypad won't work after installing OS 7.

    External keypad won't work after installing OS 7. I have a "Zagg" keyboard that won't pair now to OS 7,...Why?

    They do work. I have one and mine is working. Have you tried to reset your iPad? HOlding down teh sleep and home keys until it reboots then try pairing again.
    A slightly more drastic thing is to go into the settings and reset all settings. THe downside, you will need to retweak your device but it can help fix keyboard glitches.

  • Ciscowork 3.2.1 daemon manager is not working after patch installation

    Hi Team
    Ciscowork 3.2.1 daemon manager is not working after patch installation.
    C:\Documents and Settings\Administrator>net start crmdmgtd
    The CiscoWorks Daemon Manager service is starting.
    The CiscoWorks Daemon Manager service could not be started.
    The service did not report an error.
    More help is available by typing NET HELPMSG 3534.
    Also I checked syslog.log and it is showing below error
    an 17 14:39:34 127.0.0.1 100: <28>   dmgt[1316]: 2507(W):Daemon manager anonymous user has not been set up: 00000569
    Please suggest.
    With Regards,
    neena

    During installation, an user casuser is created with certian security settings and if those are modified\removed, DM will not start.
    Following message will be seen in /log/syslog.log
    Daemon manager anonymous user has not been set up: 00000775
    To solve the issue, run resetcasuser.exe located under /setup.support  to  recreate the settings.
    Make sure casuser account is not locked out. Make sure casuser is a member of casusers group and is set to "password never expires".
    Additionally you can try to make casuser a member of adiministrators group.
    -Thanks

  • Ciscowork3.2.1 daemon manager is not working after patch installation

    Ciscowork 3.2.1 daemon manager is not working after patch installation
    Hi Team
    Ciscowork 3.2.1 daemon manager is not working after patch installation.
    C:\Documents and Settings\Administrator>net start crmdmgtd
    The CiscoWorks Daemon Manager service is starting.
    The CiscoWorks Daemon Manager service could not be started.
    The service did not report an error.
    More help is available by typing NET HELPMSG 3534.
    Also I checked syslog.log and it is showing below error
    an 17 14:39:34 127.0.0.1 100: <28>   dmgt[1316]: 2507(W):Daemon manager anonymous user has not been set up: 00000569
    I reset the casuser password and restarted the service but still no luck....
    Please suggest.
    With Regards,
    neena

    Neena,
    Check the properties of casuser under Start > Settings > Control Panel > Administrative Tools > Computer Management > Local Users and Groups > Users and make sure it is not disabled or locked out.  The only thing checked should be "Password never expires".  Change anything required and reset casuser.

  • Quicktime won't work after lion upgrade

    quicktime won't work after installing Lion

    I am having the same problem. Anyone else have this problem and find a solution??

  • Printer won't work after installing mountain lion?

    printer won't work after installing mountain lion?

    Assuming you've first checked Software Update to see if there are any updated drivers and it's still not working, you could try resetting the printing system.
    System Preferences>Print & Scan, Control+Click or Right Click on a printer on the left and select 'reset printing system'. All printers will be deleted and need to be added again.

  • I purchased a new keyboard and the volume keys won't work now.  How can I fix this?

    I recently purchased a keyboard, with the numbers to the side, and now the volume keys won't work on the keyboard.  Do I need to reset something? 
    Thanks in advance!

    If the keyboard you purchased is an Apple model MB110LL/B -
    Apple Keyboard with Numeric Keypad - English (USA) - Apple Store (U.S.)
    ...then -

  • IMessage doesn't work after the installation of the update 5.1

    iMessage doesn't work after the installation of the update 5.1

    I am unsure whether my issue relates to updating to OS5.1 but seems coincidental that I have only had the problem for the last few days since updating.
    I can use iMessage without a problem although some messages are delayed in being sent or received recently. However, I can no longer send MMS picture messages. I have spoken to my provider who has been through all their relevant settings checks. I have restarted the phone (iPhone 3GS), I have tried turning off iMessage to send MMS but still nothing works.
    I've had no issue sending MMS picture messages since owning the phone right up until a few days ago.
    Has anyone else experienced this or does anyone have any suggestions on anything else I can try please?
    Thanks
    Jo

Maybe you are looking for

  • How do I authorize my computer to play my audible files in the iTunes library?

    Problem: Some of the Audible files in the iTunes library were not copied to the ipod, because you are not authorized to play them on this computer. What is the solution to this problem? Thank you, lisachillin

  • Dynamic column name for Oracle Server Procedure

    hello, May be it's not a right place for my question, but I hope that some of you can help me. I have source table A that has data of the same kind in 62 fields, let's say employee count for 62 departments. I do some processing with these counts(sum(

  • How to postback automatically?

    Is there way to make a page postback automatically for every 30 seconds? I am making a chat application that needs refresh for every 30 seconds. I failed by using <meta http-equiv="refresh" content="30"> it is reloaded by not change the value on outp

  • Imported PowerPoint Slide doesn't look right

    I read Captivate 3.0 help and learned it can't handle PowerPoint 2007 files, so I saved my PowerPoint slideshow to 1997-2003 compatibility mode. One of the slides has tables with headings, and Captivate 3.0 does strange things when I import it--like

  • Info Record Update at Quotation level

    Dear All, I want to update purchasing info record at the time of quotation maintenance. The field 'Info update' is available to update the same. For that system gives 4 options. ' ' The info record is not updated. 'A' If an info record exists at plan