Volume stuck suddenly..Won't adjust..

I've been using my iTouch 1G for a year or so and it's worked flawlessly. Then today I went to use it and it's stuck on a loud volume. I tried adjusting the volume slider, but when it moves, the volume stays the same level. It won't adjust at all! I'm not sure what caused it but I might try restoring to see if that fixes it.
Any idea's?

I was listening to my IPod one day and wondered if the volume button on the side would adjust the volume while listening or if it was just to increase volume when earphones weren't attatched. After adjusting the volume with with the button on the side the slider would no long increase/decrease volume. On a whim I powered off completely and then turned it back on. It apparently reset and the slider worked ok. Hope this works for you before trying a reset. I guess it's the old adage...when all else fails...reboot.

Similar Messages

  • New Ipod Touch won't adjust volume

    Hey,
    I just got a brand new Touch today. After updating to 2.0 suddenly the volume won't adjust when listening to music or watching videos. Does anybody have any ideas? Thanks.

    I had the same issue but a "Restore" solved the problem. From Apple:
    Try restoring iPod touch using iTunes.
    Connect iPod touch. When it appears in the Source list, click on Restore in the Summary tab.
    The settings and data are backed up and then re-synced after the ipod is restored to factory settings.

  • Installed iTunes on my laptop Windows 7 64 bit and I now have the following problems 1) iTunes volume won't adjust with the laptop volume control, only within iTunes, 2) playback doesn't work unless I click play twice and 3) the iTunes Store won't open

    Installed iTunes on my laptop Windows 7 64 bit and I now have the following problems 1) iTunes volume won't adjust with the laptop volume control, only within iTunes, 2) playback doesn't work unless I click play twice and 3) the iTunes Store won't open

    Installed iTunes on my laptop Windows 7 64 bit and I now have the following problems 1) iTunes volume won't adjust with the laptop volume control, only within iTunes, 2) playback doesn't work unless I click play twice and 3) the iTunes Store won't open

  • Volume won't adjust or mute

    I have a macbook pro that's about a year and a half old and the volume won't adjust anymore. It isn't a headphone jack issue, nor am I getting the "circle" people refer to when they have similar issues. I can't control the volume with my F10,11,12 buttons, or even on my upper toolbar/ system preferences. I still get sound through both the headphones and the internal speakers, but can control the volume through neither. Any ideas would be greatly appricated!
    Thanks!!!

    I recently went to the Geforce website and downloaded the latest drivers without a problem. This did not fix the keyboard volume controls issue.

  • OS-X suddenly won't boot

    OS-X suddenly won't boot on a G3 desktop w/ 4.0 Gb hard drive with ~380 Mb free space. The boot screen comes up and the "pinwheel" spins forever. I ran Disk First Aid from the OS-X Install disk, and Verify reports the following errors:
    Missing thread record (id=10180)
    Invalid sibling link
    Repair reports the same errors and runs to completion, but doesn't fix the problem. I've run Repair several times with same results.
    Just before all this, Safari wouldn't launch. Shut the machine down to reboot and now this.
    Anyone have any ideas? Thanks in advance!
    - Lyn H.

    OK, so I went out and bought Disk Warrior. The machine will NOT boot from the CD. When I start up holding the C key down, it seems to try booting system 9 off the hard drive, but then it goes into an endless cycle of reboots. Continuing to hold the C key down simply causes repeated reboots; it never gets beyond the Happy Mac icon.
    I have also tried holding OPT-CMD-SHIFT-DELETE, but I just get the floppy icon with the flashing question mark. If I release those keys, it attempts and fails to boot 9 off the HD, then tries X and hangs as described in my first post.
    The machine WILL read an OS-X Install CD (actually, several) and WILL boot up normally from a System 9 Install CD. So the CD-ROM drive appears to be OK.
    I've loaded the Disk Warrior CD into another machine and it looks fine.
    I'm completely stuck. Any thoughts? Thanks again in advance.

  • Volume stucks of Nokia Music Songs

    When i download songs from nokia music application, Volume stucks when i try to play it in Music + video in My Lumia 920.
    This Becomes really annoying.

    Hi HiteshTyagi,
    Thank you for posting and welcome to the Nokia Support Discussions! 
    We'd love to help you with your concern. Just to verify your issue, when you say that the volume stucks, does it mean you're not able to adjust it while playing music? Is it only happening with music? How about with calls or Youtube videos?
    If the problem is only happening with the songs downloaded from the Nokia Music, try removing and re-downloading the songs from the app. You may also try pressing and holding the power and volume down keys at the same time for 10-15 seconds. The phone should vibrate and reboot, but it will not delete any files saved in your phone.
    We also recommend checking for available updates for the phone software. Go to Settings, and then Phone Update, and the select Check for updates.
    Hope this information helps. 
    Cheers!

  • My iPad on system iOS 5.1 suddenly won't download app updates. No problem with my iPhone. What's going on?

    My iPad on system iOS 5.1 suddenly won't download app updates. Tried rebooting without success. No prob with my phone. Help!

    Am having the same problem. Rebooted and still no success

  • HP OfficeJet Pro L7590 suddenly won't print yellow ink.

    My OfficeJet Pro L7590 suddenly won't print yellow ink.  The cartridge isn't empty.  It still prints everything else.  Things that require yellow ink come out a different color (ie: green comes out blue).  I've cleaned the printheads several times from the "tools" menu and the report says the printheads are in "good" condition.  I've also tried soaking the printheads in hot water for 5 min like was mentioned on here.  Still nothing.  Any suggestions?

    Hi - you've worked through all the steps in the support document here? http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01957673&tmp_task=solveCategory&lc=en&dlc=en&cc... 
    If you have, and still see bad red and green blocks on the PQ Diagnostic page (as described in the document), you may have to replace the black/yellow printhead (even if the printhead health is reported as 'good'). You can check your warranty on that printhead here: http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&lang=en&docname=c00206040
    I work on HP's behalf.

  • My MacBook Pro 2009 won't turn on. It suddenly won't charge and when it did I shut it down and now it won't turn back on. Charging shows green and the green little dots are showing on the side. I tried smc reset, command p r, what else?

    My MacBook Pro 2009 won't turn on. It suddenly won't charge and when it did, I shut it down and now it won't turn back on. Charging shows green and the green little dots are showing on the side. I tried smc reset, command+p+r. Any other suggestions before i take it to apple service center?

    A four year battery could be dead. I'd contact an Apple Service Center.

  • External hard drive suddenly won't mount

    Although I've not had a problem with this drive in the past, it all of a sudden won't mount. It has all my music on and stalled while I was using iTunes, the timer wheel came up and was still the same after 20 minutes so I closed down. Now the drive won't mount at all so I can't even try repairing the disk. I've tried swapping from firewire to USB cables and also going through a hub, neither have worked.
    It's a Lacie and the power light stays continuously orange on it and it feels like it's working overtime.
    PLEASE HELP!

    A little bit more on this... I looked at the instructions for the Lacie and it said that some smaller laptops may require a power cable via a USB port and back into the Lacie, which now works but I'm wondering why this has happened all of a sudden and can I rectify it??
    I've deleted a load of stuff off my ibook hard drive, like photos etc, thinking that would help but it hasn't. Plus, I've recently installed an extra 1gb power card.
    What can I do to avoid having to plug all these peripherals in to access my music?

  • MacBook suddenly won't detect my display, Using Mini Display Port to VGA?

    MacBook suddenly won't detect my display, Using Mini Display Port to VGA?

    dohdoh1985, I have the exact same problem also! I recently bought a 42" RCA LCD TV. I connected my MacBook Pro to my TV using a Dynex Mini DisplayPort to HDMI adapter that I got from BestBuy. It worked great until I upgraded to Mac OS 10.6.4 and then it suddenly stopped working. Same TV, same settings, same cables, same adapter. Nothing changed since the last time it worked except that my OS was upgraded to 10.6.4, so i am assuming that is the culprit. The symptoms are EXACTLY the same as what dohdoh1985 described; when I plug in the TV, the laptop display flashes (3 times) as though it is detecting an external display and the picture on the TV briefly goes from blue to black for about 1 second then back to blue. The TV does not appear in the display menu / control panel and there is no sign that the MacBook detected it. I went through the usual troubleshooting steps (reset PRAM, checked connections, tv settings, etc) but nothing worked. Other HDMI sources (i.e. Blu-ray player) work fine on the TV using the same HDMI cable on the same port so there is nothing wrong with the cable, the TV or the TV's input settings.
    Meanwhile, I can still connect my MacBook to my external ViewSonic monitor at work without any problems. It's just the TV that's not working.
    I cancelled my cable subscription a while ago since I only watch shows online nowadays and this was my only way of watching TV shows, so I'm quite upset.
    Apple, please help!

  • FCE project suddenly won't open in FCE but it will open in FCP???

    I've been working on a FCE 3.5 project for a couple weeks. Everyday I save the project under a differently dated name. I finished working on the file for this morning and saved it before closing. When I went to open it this afternoon, it suddenly won't open. Yesterday's file version of it will open though. I tried all different ways of opening todays version but it just won't open. So I tried to open it in FCP 5.1 and it opened up fine. I don't understand what could have happened to the file, that it won't open in FCE but it will open up in FCP? Any guesses.

    Hi Fay,
    Your method seems like a good one and as you say, makes it easy to spot any problems. I have a big family project involving many hours of kids video which I am editing. I have been filing everything under the one title, using "Save All" each time I finish the session, but in fact I can see the benefits of your method and will now start saving using the date.
    Thanks again and good luck with tracking down your file.
    Cheers,

  • New Mini - Firewire plug is stuck and won't come out

    Hi,
    This is a virtually new Mac Mini; A firewire plug from my 20" Cinema display is stuck in the firewire port and won't come out. (I'm trying to disassemble this mini to move to another location.)
    I'm trying very hard not to pull too hard because I don't want to damage the firewire port. But I don't know what to do - it's just stuck and won't come out.
    Any ideas? Many Thanks,
    Frank B.

    Well, I finally got it out after fiddling with it, and walking away several times. I had to make sure I didn't damage it, so I approached it very gingerly.
    How did I get it out? It's amazing what actually worked. What worked was grasping ONLY the firewire chord about 1 to 2 inches away from the plug and pulling Only on the chord straight out.
    Doing it this way, it popped out with very little resistance. Strangely, the Apple Cinema Display firewire plug almost seems to click when you plug it in.
    So I immediately tested a generic firewire plug (non-Apple related) and it plugged in and pulled out with no problems or resistance whatsoever.
    "This completes my test of the Apple Cinema Display Firewire plug." (a joke there)

  • My macbook pro suddenly won't send emails.

    They sit in my outbox. Please can you help.
    This suddenly happened this morning when I tried to send a video.  I cancelled that message bit it froze the whole thing although one message seems to have got through.

    krowl13 wrote:
    My Macbook Pro suddenly won't read my 750GB WD Elements Hard drive.
    If I'm not mistaken, this drive is bus-powered. MBPs seem to have frequent problems with bus-powered drives, probably because they don't provide enough power on the USB bus.
    In disk utility though it says it is a 2.2TB hard drive
    It is possible that the drive or USB interface are damaged. However, it is too early to decide. You need to connect the drive to a desktop machine (Mac or PC), or provide more power to the drive (with a power supply, if the drive accepts it, or a USB Y-cable and a USB power supply, rated 1A or more).

  • Movies suddenly won't play on iMac w/ Maverics

    All movies (YouTube, Vimeo, my own on internal or external drive) suddenly won't play on iMac.  Just started happening 3 days ago.

    They just didn't play from browsers, my own mp4's,  or .mov files, iMovie wouldn't work either; but solved it today by simply re-loading OS 10.9.2.   Everything works fine now. 
    THANKS! 

Maybe you are looking for

  • Error 3194 when upgrading to ios 7.

    I receive error 3194 when upgrading to ios7 on my iphone 4 ( and I really don't know if it is 4s or just 4).  I am working though the itunes softward on my home computer.  It seems I am stuck in something called recovery mode.  I have tried a variety

  • Standard Function Modules, BAPIs, BADIs and User Exits  in OM

    How do I check what are the Standard Function Modules / BAPIs in OM or any HR sub modules like PA, Comp, TEM etc..

  • Concurrent managers FNDLIBR growing over 254 Mbytes at peak workloading

    Hello i have a problem that my FNDLIBR processes grow with no limit and take lot of CPU i implemented the note below to bounce processes that take 100mb or more. but i have now FNDLIBR that crrosed 100mb and still not killed maybe someone understand

  • Opening several pictures in Finder

    Sometimes I receive folders with several photos and I want to check them out without using iPhoto so I select all the pictures (since you can't open 1 photo and just click next or something) and do +O to open all the photos. But the order the photos

  • Replacing BPM

    Hi Everyone,   Is there a way to Replace the BPM in the Middle with another one, to Call a BPM DYNAMICALLY. Regards, Varun