Volume through headphones doesn't work?

When I play my iPod without headphones in or on the iHome, volume works perfectly fine. But when I plug ANY pair of headphones in, and adjust the volume "bar" all the way up, no volume is produced. Anybody have a solution/answer to this without restoration? Thanks everyone.
~Nate

Have you tried another pair of headphones?
Go to Settings>Music amd make sure that volume limit is off.
Try the following to rule out a software problem:
- Reset. Nothing will be lost.
Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPOd.
If you still have the problem then it is likely that the headphone jack is bad.  Apple will not replace the jack but will exchange your iPod for this price:
Apple - Support - iPod - Repair pricing
A third-party place like this one may be less expensive.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

Similar Messages

  • My ipod nano 6th gen doesn't start. When I plug it, only blink the apple logo on the screen. I try to reset it holding by 8 seconds start button and volume down and doesn't work. My Ipod doesn't have any shock or water damage. How can I do?

    My ipod nano 6th gen doesn't start. When I plug it, only blink the apple logo on the screen. I try to reset it holding by 8 seconds start button and volume down and doesn't work. My Ipod doesn't have any shock or water damage. How can I do?

    Hey rulosrojos,
    The article linked below details a number of troubleshooting steps that can help restore functionality to your iPod nano.
    iPod nano (6th generation): Hardware troubleshooting
    https://support.apple.com/en-us/TS3474
    Sincerely,
    Allen

  • Headphones doesn`t work

    my iphone 4 bought at apple store from Seattle 2 years ago
    and the headphones doesn`t work now
    can apple`s Genius fix that in the apple store where in Beijing?
    If the receiver has broken ,how much money will it takes?

    is there a red light on in the headphone jack?

  • X6 headphone doesn't work

    Yesterday I test my mobile and my headphone. Unfortunately the headphone doesn't work, I can't heard the voices (in the radio, mp3, videos), and the keys (play,pause..) don't work. In addition, if I test with other compatible XPress headphone, I can listen to music perfectly and I can manage play, pause.. from headphone.
    First, I thought the problem was my headphone but, surprisingly, my headphone works in other nokia mobiles, like Xpress 5800 and N79.
    I think, there is a problem between the firmware and the headphone, isn't it, any idea??
    Thanks in advance.

    i seem to be having the same problem. i have read all the posts and tried pushing in the headphone into to the jack as advised till i get a locking click but the issue persists. either there is no sound at all or there is an extremely distorted or yawing noise coming up. this is a fone that has been purchased last week and i am still trying out all its features and one of the main reasons for me to get this fone is to use the music features on it as i travel a lot and i use this while travelling. its very unfortunate that nokia is not responding to my mails or requests for assistance. i am now losing patience with this whole process and am very dissappointed with this product. i would appreciate any suggestions or advise to resolve this issue so that i can use my fone as soon as possible. thanks.

  • I left my headphones into my new macbook pro and now there is no volume through headphones or without. I have tried to reset the audio port and it is not on mute. Any ideas?

    I left my headphones into my new macbook pro and now there is no volume through headphones or without. I have tried to reset the audio port and it is not on mute. Any ideas?

    Go step by step and test.
    1. System Preference > Sound > Output > Internal Speakers
        Highlight  Internal Speakers / Headphones
        Make sure that Mute is not enabled.
    2.Plug in and  remove the headphone.
        If you see red light in the headphone port, plug the headphone
        in and out of the port 5 or 6 times to flip the microswitch inside.
        Sound output may be stuck in the digital mode.
    3. Reset PRAM.  http://support.apple.com/kb/PH4405
    4. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    5. Applications > Utilities > Audio MIDI Setup
        Audio Devices window
        Side Bar
        Click the Built-in Output.
        Under Mute any of the boxes checked? If so, uncheck it.

  • Volume on apps doesn't work

    Games and apps have volume only through headphone..

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
    If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/ts1630
    http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
    To solve some sound problems, just follow these simple steps
    1. Go to Settings
    2. Tap on General
    3. Tap on Reset
    4. Tap on Reset All Settings
     Cheers, Tom

  • Headphone doesn't work in windows 7 at macbook pro 13 (early 2010)

    I installed all drivers from bootcamp 3.1. But when I plug in headphone, there is no sound in my speaks and headphone in windows 7. But in mac os, that would be fine. And i try to reinstall and update. it still doesn't work. How to solve this problem?

    I found a fix for this problem, so here it is.
    what you need
    1.mac osx dvd [where all the bootcamp drivers are]
    2.7-zip software
    goto the mac osx dvd, find the cirrus drivers. it should be inside drivers folder.
    extract the files using 7-zip and save them on desktop
    now goto device manager, and update the cirrus audio manually, when the option of have disk comes, navigate to the desktop folder where u saved the extracted drivers and select the driver file.
    when windows gives a list of which drivers to install choose AB77 .
    thats it then u'll be good to go after the new drivers install.
    if you cannot find the [AB 77] use a disk from a 2009 macbook pro

  • Upload webpage through Filezilla doesn't work

    Hi
    I've created a page with Muse, I tried to upload it through ftp to an external hosting, but it doesn't work. Apparently I make eveyrthing correct but when I go to my website the page won't show. Hosting name is netsons.
    Can anybody help?
    Thank you

    Are you using the built in FTP or a third party FTP client? Is that a 404 error when you access the page at the remote site? Make sure you do not have Export Page option disabled for the affected page (look for the option in the page's context menu in Plan/Design mode).
    If that is not the case, please share the page URL.
    Thanks,
    Vinayak

  • Volume down button doesn't work

    I am having problems with my Volume down button.  I've had the 5 for 3 weeks and it worked for the first 2 weeks.  I can only get the volume down with the earbuds volume control or on the screen if its an option.  I have reset my phone several times and I have the most updated IOS and it still doesn't work.
    Any one else haveing the same issue or have any solutions for me.  I guess next I will try to restore the phone.... just really didn't want to have to go that route, but it may be necessary so I can at least try all my options.

    Yes, restore the iPhone with current iTunes on computer. If still problem after that, make Genius reservation or Service arrangement and take or send to Apple for resolution under Warranty.

  • Choosing start volume with [alt] doesn't work anymore

    Hi there,
    On my MBP (15" early 2011). Normally I can choose from what volume I want to boot by pressing the [alt] key right after switching on my MBP. I have OSX Snow Leo and Win7 (64bit) installed.
    However since I installed the latest software updates several days ago, including a firmware update for the thunderbolt connection, the choosing of the start volume by pressing [alt] on startup doesn't work anymore: I can move the mouse, but the two volumes don't appear on the screen. All I can do is to switch off. I can however boot under both, OSX and Win7 by choosing the "restart under Win7/OSX" option in the other system respectively.
    I now found out, that it works perfectly fine again when I have my 27" Apple Cinema display (mini display, not thunderbolt) connected to my MBP. When it's not connected I am having the issue.
    My guess is that the thunderbolt firmware update causes this.
    Anyone got an idea? It's quite a pain in the *** that I always have to start one system at first to get in the other one at the moment.
    Thx

    Hi Fortuny,
    thx for your answer! I just have reseted this NVRAM as described in the support page, and think I have done it right. It worked as said there, I just didn't have to set any time or resolution things afterwards, as it is written there that it might have to be.
    Sadly it didn't seem to help. Anyway, I do have news:
    When the two volumes didn't appear again on the startup screen, I sat back and thought about what the issue could be. After approximately one minute starin on the screen, suddenly the two volumes appeared! So in fact it DOES work, just it takes about a minute now when I don't have the cinema display attached.
    Does this additional info say anything to the experts out there? It's still not solved, as it is rather inconvenient to wait a minute untill I can choose the startup volume.
    Thx for any sugestions!

  • No volume through headphones

    I cannot seem to get my iPhone to play music through headphones. I have an adapter so the phones are seating correctly. I am ot sure if this is a setting that I may have missed. Any suggestions?
    Thanks in advance

    Does the earbuds that came with the iphone work ok when connected to the iphone.

  • Volum turning wheel doesn't work

    Hi all:
    I have a toshiba satelite laptop
    It provides a "wheel" (not sure the word is correct, sorry. not a english native speaker) for adjusting sound volumns
    it doesn't work with Archlinux
    any hint ?
    thanks

    elflord wrote:
    Hi all:
    I have a toshiba satelite laptop
    It provides a "wheel" (not sure the word is correct, sorry. not a english native speaker) for adjusting sound volumns
    it doesn't work with Archlinux
    any hint ?
    thanks
    Does this wheel correspond to the mousewheel ?
    Anyhow, installing and executing:
    pacman -S volwheel
    volwheel &
    will perhaps achieve what you need. That's what I use with my Logitech G5 mouse.
    Try it, if it doesn't work you can always remove it.
    Another way is to find with "xev" what events your wheel generates and bind them to volume Up/Down,
    how to that will depend on what window manager you are using.
    Mektub

  • Burned in Nero Express through Windows, doesn't work on Mac

    So I just burned a Data DVD (files like music and mac applications) on Windows, using Nero Express, but then I mount it on my Powermac G5 PPC and it doesn't work, my mac doesn't recognize it, what's the problem ?
    Thanks.

    Did you close the disc, or leave it open for further burning sessions?

  • OWA through webvpn doesn't work

    Hi,
    I configured WebVPN on a 1812 through SDM. Everything works fine so far. Now I wanted to allow Outlook Web Access to my users. When I use the http in the url-list users can login, if I use https the connection hangs. Ok, I tried http, logged in and everything gets displayed. I can open emails and contacts so far. But when I want to open a subfolder WebVPN kicks me out!
    This is my config:
    webvpn gateway gateway_1
    ip address X.X.X.X port 443
    http-redirect port 80
    ssl trustpoint TP-self-signed-3752992620
    inservice
    webvpn context portal
    title-color #669999
    secondary-color white
    text-color black
    ssl authenticate verify all
    url-list "Intranet"
    heading "Intranet"
    url-text "Outlook Web Access" url-value "http://owa.host.com/exchange"
    policy group policy_1
    url-list "Intranet"
    default-group-policy policy_1
    aaa authentication list sdm_vpn_xauth_ml_1
    gateway gateway_1
    inservice
    end
    When logging in only the fields "user" and "password" gets displayed, but not "domain". I think because it lacks of SSL.
    Any ideas?
    Thanks,
    MB
    P.S.: IOS is 12.4.11T (advanced ip services)

    Hmmm ... I tested everything today with IE and Firefox again without any errors. Perhaps this was a problem with OWA ..

  • Headphone doesn't work

    Good day,
    I am experiencing a unique problem that I have never encountered before in any phone.
    I have been using the Blackberry Q10 with the original Headphones included in the device package, it worked well and the sound was great. However, the right channel on the headset stopped working today. I tested it on other device like a tablet or a pc and it still works. I tested other headsets on the phone and both channels work.
    I have eliminated all possible problems like volume control, audio output jack poblems and even updated to the latest BB OS version. Please advice.
    TL;DR headphones and phone don't work with each other but both work on other devices.

    Bump. Developers answer me, please.

Maybe you are looking for