Volume to TV Very Low?

I have a current gen Mac Mini I'm using as a media center. I'm connecting it to a Viewsonic 720p LCD via VGA cable for the video, and PC-Sound In for the audio. However, I'm finding the volume, even when the Mac Mini is set to max, far too low to hear well.
As examples, with the TV volume set to 15, my cable box (connected via HDMI) is just fine and my PS3 (also via HDMI) is too loud (I need to turn the TV volume down to 10). By contrast, TV volume set to 30 can sometimes not be enough for the Mac Mini (of course it doesn't help that music and sound effects are always much louder than dialog! )
Has anyone had this problem and figured out a solution? Is there a hidden setting to go beyond the standard max volume out on the Mini? Would switching from single RCA PC-Audio out to a digital cable offer any improvement in volume?
(I have external speakers set up, but I'm trying to figure out why the Mini is literally half as loud as the cable, and a third as loud as the PS3).

I have a mini connected to a TV, sound is from the mini's headphone jack to twin RCA (left and right) audio in on the TV. Sound levels are broadly the same as other sources. Given the mini outputs sufficient voltage to drive headphones, it should provide more than adequate output for a line-level input such as the one I think you're describing on your TV.
There's no hidden additional volume control - the sounds preference pane is all you have.

Similar Messages

  • HT1937 my receiver volume (5s) is very low even when turned all the way up. is there a setting to correct?

    my receiver volume (5s) is very low even when turned all the way up. is there a setting to correct?

    Hello dreuer
    Try out some of the troubleshooting steps in the article below, it will go into checking Bluetooth connections as well as restarting your iPhone.
    iPhone: Receiver and call audio quality issues
    http://support.apple.com/kb/ts5196
    Regards,
    -Norm G.

  • IPhone Earphone Speaker volume suddenly got very low

    Hi,
    A week ago my iPhone Earphone Speaker volume get very low.I have installed to 3.0 and nothing help me out.
    I think this is a hardware problem and getting to replace a Earphone Speaker.
    Does anyone knows is this software or a hardware problem?
    Its works fine over BT or earpiece.
    I can only hear at very low volume.
    Thanks,
    Ivan
    Message was edited by: ivammg

    i just did this with my moms original iPhone. before the update the volume was fine, after it got noticeablly low. i could bearly hear anything. used the sim card eject tool that came with my 3GS and poked at the speaker very lightly and noticed it got higher. i dont get how its related to the 3.0 software update but that fixed the problem for some strange reason?

  • Volume of speakers very low

    The speakers on my laptop are extremely low despite setting all of the volume to maximum volume.
    Looking at othe posts on this topic, there is a recommendation to go to the "Enhancements" tab within the sound settings but I do not have that tab available.
    This is very frustrating as I am unable to use my laptop for Lync conference calls which is essential for my job. 
    PS: I have also set the volume setting for Lync to 100% and that hasn't made any difference.

    @JG14 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • Audigy 2 ZS + Vista 64bit resolves in very low maximum volume out

    Hi,
    I did just install Windows Vista Ultimate 64bit Edition on my computer.
    I've got a CREATIVE Sound Blaster Audigy 2 ZS sound card, and I downloaded and installed the drivers for it.
    I did not run into any complications while installing the driver, but after the driver was successfully installed and I rebooted my computer the first thing that hit me was the fact that the volume output was VERY LOW.
    I have to boost my volume to the maximum to even be able to hear my music and games at a decent volume level. The maximum volume output seems to have been reduced with at least 50% compared to what I had with Windows XP Professional.
    I've tried to configure every sound settings I can find, but without any luck.
    The sound card is completely useless with this low maximum volume output, when I can barley hear my music or in-game sound.
    Is this a common problem?
    Have do I solve it's
    I need at least 10% increase in the sound volume, otherwise the sound card is pointless.

    Yes I did, I've checked everywhere I can possibly think of. Have boosted everything to the max, but still it's way to low

  • BMW - Bluetooth Volume - Very Low

    I currently drive a BMW 328xi with Navigation paired with an iPhone 3GS. Is anyone else experiencing low speaker volume coming through the car speakers? I've maxed out my settings, but the volume is still very low. I'm assuming that the microphone is fine, because the other party can hear me well.
    If anyone has run into similar issues and has a fix, please post.
    Thank you.

    Out of curiosity, have you used the side volume button on your iPhone to maximize the volume when the phone is in use?
    The iPhone unlike other phones, remembers the volume settings per audio source so that it doesn't quite affect hearing if you want it loud in one setting and then quiet with another (which could be more powerful).
    Additionally I have a 2010 Ford Fusion with Navi system (not quite a sweet as your wheels) but have read on the SYNC forums (which allow me to integrate the bluetooth phone in with the stereo like your BMW) that some of the NAVI systems tend to be quieter...
    Each time when I go to use the phone for the first time in the car I still need to crank the phone volume as the car keeps putting it only to 1/4th of the stereo volume... That's the other pain that I keep encountering...
    As for the other party, they can hear you fine because of the positioning of the microphone in your car... It's between the phone's volume (remembering) setting and that of your car stereo...
    Hope this helps... Let us know if this helps at all!

  • Volume on iphone is very low, this is a common problem, Apple Needs to FIX!

    I have a new iphone 3GS that I got at the end of July, 2009. Since then i've been having problems with the volume! I called support because i had this problem along with my screen turning blank and freezing up. Support said to take the case off and this might help. well it did help the screen issue (which is kind of dumb when you think about it because the case is supposed to protect the phone and instead it caused it to malfunction!!,wierd), but the volume issue never really changed. I am hearing impaired and I do wear hearing aids, BUT....I have ALWAYS been able to use cell phones that have good loud volume, as i need to remove my aids to use the phone. My LG phone had BEAUTIFUL volume, never had a problem!
    So, then I started to do some research and saw this is a very common problem! everyone I know that has an iphone has this problem, and all these people are normal hearing people! So then i decided to just get some really good, superduper headphones, because the headphones that came with the phone were ok, but i had to hold them in my ears.
    The other day i bought the new Bose in-ear headphones with superior sound quality and at $130 bucks, they better be and the are compatable with the iphone. But.....again, while actually talking to someone on the phone the sound, even with the headphones and all volumes max'd, was still very low!! and i know its not the headphones because listening to the ipod is fantastic! it must be the phone!!!
    I even used the "accessibility" setting that is on the phone and selected the mono audio feature which pushes both L&R sounds through one channel, and still doesnt help!
    I even called support back today and one guy said i had to "restore" my phone by plugging it into my computer (not really sure what he means) but we got disconnected and the other guy said that i should bring my phone into the apple store. Both tech guys denied that there are lots of calls or complaints about this....but as you all know from reading the many posts, that this is a very common problem!!!
    I think Apple should do the right thing and recall these phones or at least fix them or SOMETHING!!!! this volume issue is internally, because when i make a call and an automated voice comes on, it works fine (majority of the time) but as soon as a live voice comes on the phone, the volume drops! there must be some type of automatic voice adjuster that is just not working properly. I mean i love my phone!!! But....i cant use it!!! And now, im going to have to return my Bose headphones and try to find something else.
    Can anyone really help me?????

    stewa348 wrote:
    I agree with you about the volume on the phone itself. (I have 3Gs). It needs to be louder. I also wear hearing aids. However I do think there may be something wrong with your phone because when I connect my earbuds (Klipsh) I get very good volume through them. In fact at full volume it's way too loud. I would push for a replacement phone.
    FWIW, my daughter (who also wears hearing aids) has trouble hearing her iphone. It appears to have more to do with the speaker not being lined up with the hearing aid's input. Her audiologist pointed out that some current hearing aids support bluetooth, I think we will get those next time we replace her hearing aids.

  • Iphone 5 volume on calls is very low

    Loads of people are reporting low volume through the iPhone 5 handset (when holding up to the ear).
    An no, there is no film over the speaker !!
    When someone calls, the sound is muffled, sounds like a very low bit-rate call. All the volumes are up as high as they go, and i can take the call in a quiet room and it sounds the same (so not the noise-cancelling part).
    help, this is most annoying.

    Ok after some web searches and no resolution, I took advantage of my user rights (sale of goods act for the uk).
    Arranged for tech support to call me and we arranged a replacement.
    New phone arrived.
    Problem solved

  • Very Low Ipod volume

    I have recently bought a 2GP Ipod with colour display in the United Kingdom and I am very upset with the volume level. On the majority of tracks the volume is very low and when it is cranked up to maximum it sometimes distorts the sounds although they are not very loud. I have fiddled with the EG settings but to no avail.
    When using Itunes I set the volume to the maximum - is this incorrect. I am using Sony ear phones - the ones with the little plugs which go straight in your ear.
    Please can someone advise me what do as I am rather upset with the iPod - I have used the EU Pro Booster but it doesn't seem to help.

    Normally I do not engage in contest such as these, especially when I am correct, however I will take the time to set you straight on a few things.
    Your Statement: well thank you for your very kind and informative information.
    My reply: Never a problem. I do not mind correcting people that are not well informed, and where I might have a bit more knowledge.
    Your question: so do you live in europe and do you have a ipod from europe?
    My reply: Yes I live in Europe and no I do not have a European iPod, but I have taken the time to read about the differences between the US and European version. Can you say the same?
    Your question: if not do you have a head piece from b&o?
    My reply: When you say, head piece do you mean, head phones, or ear phones, or some additional piece of equipment from B&O designed for use with audio devices? You were not clear here so I naturally assumed you meant headphones. Second, how does this figure into the equation?
    Your question: if not what made you the king of judges to contamplate about my taste and the way i like my music?
    My reply: Show me in my original post where I judged your musical tastes. Second, where did I say any thing about how you life your music. I only stated a FACT (something that you failed to do), about how non-sealing headphones such as the B&O's that can not isolate sound can not match headphones that completely isolate the listener from ambient noise. My facts verses your opinion.
    Your sophomoric question: do you work for these folks www.etymotic.com
    My answer: No. Even if I did, you are still wrong and I am still correct.
    Your question: did i ask your opionion?
    My reply: Nope, but this is a public forum and I am providing facts where you are providing opinions. Who would you listen to? You with guesses and conjecture, or me who has provided details and links to possibly solve a problem for the stater of this thread?
    Your statement: I was just talking to a fellow who lived in europe and had a problem?
    My reply: So was I, and had info to back mine up.
    Your question: who are you to tell me that i am mistaken?
    My reply: Obviously someone that seems to know quite a bit more than you about this issue.
    Your statement: learn to be polite and express your views this way
    My reply: Learn or have an idea about what you wish to discuss and I will not have to correct you again.

  • Call listening volume very low on BB Z10.

    my phone has very low Call listening volume.i can' t hear properly so kindly suggest me what to do...its become very difficult to listen.i have given my phone to my friends,family members that everyone is facing the problem or not?.result found that everyone faces the low call volume i.e. ear speaker hv very low volume.so kindly suggest me what to do.i have updated latest software. ..

    thakurdiwakar17 wrote:
    my phone has very low Call listening volume.i can' t hear properly so kindly suggest me what to do...its become very difficult to listen.i have given my phone to my friends,family members that everyone is facing the problem or not?.result found that everyone faces the low call volume i.e. ear speaker hv very low volume.so kindly suggest me what to do.i have updated latest software. ..
    Does music play loudly ?.
    The volume controls may be set to control media, during a call press the volume up button.

  • HT4623 My ringer and music volume is very low!! The problem just started today can someone help?

    Can someone one help me, I just started having problems with my volume. My music and my ringtone are very low!

    As a first step, do a hard reset by holding down Sleep/Wake and Home buttons until you see the Apple logo on the screen. If a red power slider appears on the screen, just ignore it and keep holding the buttons down until you see the Apple logo.

  • With volume addjusted accrdoin ly in my I tunes program volume is very low any other music program is much louder

    Volume is very low in my I tunes library all other music programs it is much louder

    WInchesterAA wrote:Yeah.. everything passed.
    I am asking whether the volume level in the speaker test in the Speaker Settings software is OK.

  • Hi. I Have a Pavilion dv9000 which has always had very low volume - really needs to be increased?

    Hi. I Have a Pavilion dv9000 with Vista Ultimate 64.  It has always had very low volume and I find I generally have to have the volume up into the 70's 80's as well as the onscreen media player slider almost full -  which then gets all distorted - and then have to turn it down again when not using the player as the computer error beeps come screaming out., Ive checked the settings on speakers to make sure all are the same & balanced and also have updated any codecs as needed. Is there a sound lever setting elsewhere?
    cheers

    Thanks for the reply and peeling my post off Mike, sorry I didn't start my own initially.
    Well @ 1333Mhz I was using the rated timings 9-9-9-24 (as per Corsair) but it wasn't very stable as I said.
    I have since changed the FSB/RAM ratio to get 1066Mhz and it seemed much happier. (@1.5v) It would be nice to run the RAM at it's rated setting but my OC skills aren't that extensive. I imagine it would need alot of tweeking? Or could I have just relaxed the timings a bit?
    Would removing the Switch Cards make any difference?
    Thanks in advance.

  • My volume on the Iphone 3GS is very low is it an equipment problem, setting problem or update problem?

    My volume on the iPhone 3GS is very low. Is it an equipment problem, settings problem or update problem? And, is there a fix other than having Apple fix it?

    Have you had a look here to make sure it is set up how you want it...
    iPhone User Guide
    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

  • Very low volume on hp pavilion dm4-1160us, idt high definition audio codec v 6.10.6289.0

    Hi There,
    Initially when I bought my dm4-1160us, the volume was better but I don't know what happened in between, now the volume is very low. I have re-installing the driver by un-installing and also using the recovery manager but still it didn't help, can someone be of some help in here, thanks in advace

    Praveen,
    If the Troubleshooting tips Danjen provided do not do the trick,
    you might try this as a stop-gap / workaround to regain some control over the volume.  It may work.
    Right-Click on the Sound icon in the Task Bar (or open with Control Panel > icon view > Sound)
    Open Playback Devices
    Click on Speakers and Headphones (to highlight)
    Click on Properties
    Click on Enhancements >
    Select "Loudness Equalization"
    Click OK
    Next,
    Still in Sound > Playback Devices
    Click on Communications tab
    Under "When Windows detects communications activity:"
    Select "Do Nothing"
    Click OK
    You may have to Restart / Reboot the machine for the changes to take effect.
    Kind Regards,
    Dragon-Fur

Maybe you are looking for

  • F-04 - Post with clearing : Process open items

    Hi everyone, I encountered issues in T-code : F-04 - Post with clearing : Process open items. The document header text data is not display in F-04. It is blank. However, when i check in FBL3N the document header text data was there. Pls assist on how

  • Form Data Order in XML

    How can you organize form data exported via XML Email Submit button? I would expect this data to follow the order within the XDP object heirarcy, however the results jump from object to object on different pages. Forget about mapping this to a databa

  • Dm6 sync error w/outlook calendar. error 0x8004fd28. please advise.

    i have uninstalled and reinstalled dm6 with no success in resolving this error. any advice.

  • Multiple (no title) entries in Safari history

    I have noticed after visiting several websites using Safari on my New iPad when I veiw my history there are several entries that say (no title).  I have played around a little with clearing my history right before visiting the sites to make sure that

  • Connection between Crystal Report and SAP ECC

    Hi. can you help me please. I'm testing the connection between Crystal Report and SAP ECC. I tried using the tables, but by making the links between foreign keys does not bring data. The other way I tried was using an ABAP function module, but using