Volume troubleshooting - weird sounds

Hi,
i just bought an iBook G4 (12'') and when i first turn it on and want to change the volume with the F4 and F5 keys, instead of the specific sound supposed to come out (like a bubble) it kind of bugs and takes a while before actually carrying out the command...
I thus hear a low, and sort of weird sound.
However, when I open iTunes, it works just fine... It's no real problem actually but I'm afraid it might only be the tip of the iceberg.
I have to admit that I did give it a slight bump before noticing that problem, but then again I only bought 10 days ago without yet having made full use of it...
(I also checked the CD burner and it works fine, so how could a bump not affect the -sensitive- CD burner and affect the volume keys... ?)
does anybody have a clue... ?
THank you very much.
iBook G4 12''   Mac OS X (10.4.2)  

Do you have a lot of applications running when it does this? I find that when my computer is doing a lot, there will be a delay before it changes the volume level. The sound is also sometimes a little different. Does it do this when you don't have anything besides the system running? If not, I wouldn't worry about it. It's just because the computer is using a lot of it's memory at that moment. You can always add more RAM, and that should solve it. But it's not that big of a problem

Similar Messages

  • Weird sound during playback of recorded track

    hey guys, how are you all doing?
    so i got a new pc rig, which is quite fast, and have started using adobe audition for recording purposes.
    i use a soundblaster audigy 2 soundcard
    when i record one track and then play it, theres a weird sound at around 25 seconds which becomes louder and then stops suddenly. it also creates a delay if i'm recording multiple tracks. here's a sound clip of the noise:
    http://www.savefile.com/files/2151778
    please tell me how to fix it.
    any help would be appreciated

    Thanks.
    I found a solution which works at least between 50 bpm and 177 bpm:
    Add a volume fader. Connect the output of the volume fader to the input of the tempo fader and set the input of the tempo fader to volume, then record the volume fader. Moving the volume fader moves also the tempo fader and changes the tempo.
    During play back, the volume fader reads the recorded automation data and updates the tempo fader in real-time and the tempo of the song is changed.
    For this you don't have to activate tempo recording in the project settings and the possibilities to graphically edit automation data are also better.
    Additionally you can add varispeed to set the speed range from 25 - 88,5 bpm up to 100 - 354 bpm.

  • My keyboard makes a weird sound when turns off or on

    Keyboard makes new AND weird sound when turned on or off?

    See Troubleshooting here  >  http://www.apple.com/support/ipodclassic/

  • My iPhone 6 camera making weird sound?

    My iPhone 6 camera is making a weird sound. when the camera focus your hear a clicking sound. I tried with my sister's iPhone 6 but its not doing it. Does anyone have this problem? Is it normal?

    Hello monikitha,
    Thank you for using Apple Support Communities. 
    You can take a look at this article for assistance in troubleshooting your issue. The section Get help with the camera on your iPHone, iPad, or iPod touch>Your photos are blurred or out of focus also addresses dark spots.
    Get help with the camera on your iPhone, iPad, or iPod touch - Apple Support
    Regards,
    Jeff D. 

  • Weird Sound From Ear Pieces

    Hi
    Sometimes i get this really weird sound from my ear pieces. It happens when i push them into my ear. it sounds like something inside is rattling. if i blow into it i can also hear it. it doesn't make the music sound any different at all. after a while it goes away but then it comes back. by the way i didn't get water in them or damage them in any way.
    thanx
    alex

    that happens to me when its up all the way were is your volume at?
    Nano 4GB black,Moto RAZR V3 black, PSP, all kinds of cases for nano,radio/remote   Windows XP   <img src="http://i36.photobucket.com/albums/e13/superman5656/s.gif"align="right"</span>

  • Weird sound on left speaker

    Hello!
    After 30 - 60 sec my MBP making some weird sound click. It's coming from left speaker.
    I search from Google and I made 'disc check - mayby my HD needs repair. OK, then Disk Utilitie said "Volume header needs minor repair". Reboot on Install CD and made Disk Repair. OK, now it's everything OK... BUT that weird sound is still. Every 1 - 5 min it's clicking.

    I found that link: http://www.apple.com/support/downloads/audioupdate2007001.html
    Mayby it's problem with audio? How I can install it to 10.4.11? This update is only for 10.4.10

  • High beep + bass makes weird sound, Inspire P580

    Hello,
    I switched rooms today. And now when I turn on the 5.1 using the audio controller, I get a very high beep. Before, the beep wasn't this loud. And also when I turn up the bass, it makes a very weird sound. I check everthing, everything is plugged in correctly but I don't know what to do. I know it's not the software.
    Hopefully somebody can help me.
    Thanks by advance
    Jascha

    I have a GigaWorks S750, today i turned on the speaker to listen to my computer, i started the music and i only hear big distortion, i turned of the music and found out that the speakers putting out a frequent beeb, and as i turn up the volume i get a tone of higher and higher frequency beep but not a louder beep, the subwoofer just makes some short noises sometimes.. and i have checked all the cables and they are ok.. i listened directly from my soundcard with my headphones and it sounded ok, i also tried my headphones by putting them into the headphone port on the decoder and it sounded as it should there two
    i am almost sure this has something to do with the electronics in the subwoofer to do, cause i dont belei've 7 speakers would stop working at the same time.
    This is so bad, i had just gotten my Xbox360 today and now i cant use it on my suround system.

  • Logic pro 9 Instrument issues/ weird sound occurring!!

    Hi guys,
    I need some help here, I think I have a big issues here with my logic instruments. I just installed Logic pro 9 about a week ago, it's working fine until...
    today when I load some of the Logic instruments (such as EFM 1 Synth, ES2, ES2 syth, or any other sytnh) from the library, there're some kind of strange/weird sound, kind of growling synth sound going on (weeeewww gurrrrrrrrt!), the volume level is also peaking out because of it. I still could play the instruments, but the weird growling sound doesn't stop, & the volume peak out even more!. the only logic instruments that works fine are Evb3 tonewheel organ, Utrabeat & Ev88 Electric piano.
    Same things happen with most of my ESX24 instruments ( such as pop horns, guitar, orchestral, etc) weird growling sound (wew grrrrt).
    Does anyone know what's happening???
    Thank you

    Hi Eriksimon,
    Yes, indeed the noise stop when I bypass the instrument.
    Yes the noise seems to have a steady defined pitch & the character of the noise is the same as the affected instruments.
    No I haven't try to load different presets at that time (it freaks me out already!)
    No I don't think I've made any tweaks/ adaptation to the environment (could you give me example?).
    *But Just now, at this moment, I just try to open & run my Logic 9 again & load the problematic instruments, The Noise's gone, I tried every instrument that has that noise problem (try different presets now) , it works fine, the noise gone (it surprise me). BUT STILL I'm afraid that this noise will occur again.
    Do you have any idea ?,
    Thank you

  • Weird sounds

    Hi,
    I'm having trouble with my built-in internal microphone. For some reason, it's making these weird sounds that sound something like a ship's horn (seriously). I can't hear my voice.
    This happened when I tried to set up Skype. It worked a while ago once or twice, but I keep having this problem, even when Sype's off. No matter where I set the input volume, except for 0, I get this noise.
    Any ideas?
    Thanks,
    Allan O.

    Hi,
    Sounds like, somehow, you've got a feedback loop. All i can suggest is deleting Skype.
    Sorry, that's all i've got!
    Cheers,
    SiR G.

  • Volume button says sound effects, no sound.

    I Can not get the sound to come through on my ipad. It works with head phones. It was working a few days ago. My volume buttons say sound effects. It used to say volume?

    Hello Skeetercove,
    Thanks for using Apple Support Communities.
    Please follow the steps below to troubleshoot the issue of having no audio output from your iPad's speakers.  Please note that even though the steps state it's for iPhone, the same applies to your iPad.
    Verify that the volume is set to a level you would normally be able to hear.
    Ensure that there is nothing plugged in to the headset jack or the dock connector.
    If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
    Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
    If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
    If the iPhone is paired with a Bluetooth headset or car kit:
    Try turning off Bluetooth.
    If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
    Restart the iPhone.
    If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
    If the issue is not resolved, please contact Apple Support.
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    Take care,
    Alex H.

  • I don't have any volume. When I push the mute button or try to increase the volume up or down nothing happens. The volume shows up as if it were at full volume but no sound. I am so frustrated.

    I need some help with the volume on my macbook pro. I am getting absolutely no sound no matter if I push the volume increase or decrease button. Nothing changes. The volume bar shows up as if it were at full volume but no sound and the mute button doesn't do anything either.
    Please help.

    Go step by step and test.
    1. System Preference > Sound > Output > Internal Speakers
        Highlight  Internal Speakers.
        Make sure that Mute is not enabled.
    2.Plug in and  remove the headphone.
        If you see red light in the headphone port or not, plug the headphone
        in and out of the port 5 or 6 times to flip the microswitch inside.
        Sound output may be stuck in the digital mode.
        Try this even if you don’t see the red light.
    3. Reset PRAM.  http://support.apple.com/kb/PH14222
    4. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    5. Applications > Utilities > Audio MIDI Setup
        Audio Devices window
        Side Bar
        Click the Built-in Output.
        Under Mute any of the boxes checked? If so,uncheck it.
    6. System Preferences > Sound> Sound Effects
        Play sound effects through:
       Select "Internal speakers" and then back to "Selected sound output device".

  • Good evening every one! recently, i noticed that my macbook pro make a weird sound when i open the screen, it's like there is something keeping the screen from moving correctly.the little noise comes exactly from the left side of the axis.please advice me

    Good evening ! recently, i noticed that my macbook pro make a weird sound when i open the screen, it's like there is something keeping the screen from moving correctly.the little noise comes exactly from the left side of the axis.please advice me what to do
    (i live in morocco and i need to know where i should take ma macbook to get it fixed and if the warranty take this problem in charge)
    thank you in advance
    macbook pro mid2012 i7 (here is my e-mail adress : [email protected])

    You should take it to an Apple store or an AASP (Authorized Apple Service Provider) Carefully inspect the hinge joint and make sure there is no debris that you can see, you can try carefully sliding some sticky tape thru the joint to clear any loose stuff out. But this sounds like there might be more going on here, and the hinge is something that you do not want to fool with.

  • My macbook pro is making a weird sound, please help?

    Hello,
    i have an early 2011 model, it was running soo fine until now.
    its making a weird sound, to describe, it sounds like a small *trrr* at normal state, and at high, intense states, (playing games..) it turns into a loud *trrrrrr*, but, if i hit it gently over the keyboard, it goes away, then comes back.
    please, i dont have an apple retail store in my country, i need help from here, help me.

    first thing to do is to buy a new hard drive and an external drive before it fails so you won't lose your files.
    once you've done that, put the new hard drive in the external drive and open disk utility.
    format/erase your new hard drive as MAC OS EXTENDED Journaled.
    After that has been done, open carbon copy (if you don't have it, you can download it for free).
    Once carbon copy is open, click on clone your hard drive.  Source drive is what you're using now and your target drive is your new hard drive.
    Once carbon copy is done, turn off your macbook, open the back of your macbook, take off the hard drive and install your new hard drive.
    After you've done all those, turn your macbook back on and you're back in business.

  • Computer freezes, then a low-volume, high pitch sound

    Hello there,
    My trusty 2002 MDD is randomly freezing on me for the 1st time! Disk Warrior nor Disk Utility form external boot-ups detect anything wrong. Thus, it doesn't seem to be a hard drive issue. Memory status on System Profiler checks OK.
    Once the beach ball appears I can't do anything but press the power button to shut it down. I've noticed that while frozen a very low-volume, high pitch sound can be heard. ???
    Thanks a lot for any feedback that you may provide,
    Jacobo

    Hatter,
    Thanks for the prompt reply. Like you proposed, I've started from my FW drive (not after a freeze though) and everything drive-related checks OK.
    Yes, my video card (Radeon 9800) does have a fan. I've though about this and the PSU as well. The latter is the quieter, less powerful one.
    My drives are less than a year old and seem to be OK.
    I’ve run Applejack (w/ memory check) and all is good.
    Can the Apple Diagnostic CD pinpoint any of these issues?
    My MDD has been incredible when it comes to reliability. She has not given me ANY problems whatsoever while stressed to its limits.
    Thanks again for your time,
    Jacobo

  • Powerbook "turns on" no display, weird sound?

    My G4 will not start. The familiar chime comes on when I press the power button, and it sounds like it will start. However, no video shows up and no hard drive activity seems to be happening. When I held down the power button and shift key together, the little lid-button light blinked a bunch of times, and a weird sound happened (sort of a low beep)
    Any ideas?

    Welcome to Apple Discussions!
    Has your clock battery been replaced in the last 4 years?
    Is your data backed up?

Maybe you are looking for

  • How to Identify Which Plug In is Missing?

    Years ago (back in 2007), we were given some Indesign files as reference for a client's work.  We never needed to open them and, if I recall correctly, we tried but had a problem.  I believe we got an error saying that a special plug in was required.

  • CHECK PRINTING SET UP IN PAYMENTS

    Hi , Please let me know how to setup check printing in oracle appsR12 ..it is urgent please help us its very greatful to ... THANKS, USER.

  • What does an unexpected error occurred (error code -6584) when opening time machine

    After a terminal hard drive fail in my 2007 imac which was backed up to time machine I tried to restore some data onto my replacement imac 2.9 late 2012. I did this via migration assistant - it was a long process about 4 hours - so I went to bed and

  • Missing volume sliders

    so i was working on a song, and when I opened the file up (a new one), the individual volume sliders for each track are not there anymore. to adjust the volume for anything I am forced to open the automation line. has anyone ever had this problem bef

  • Maintaining databases in hindi using oracle 9i

    Hello all !! I am currently designing a website in hindi in which a hindi database is to be maintained..I am using java server pages and servlets to design the website.Kindly suggest me the step by step process as to how data can be saved and retriev