Volume up button sounds like the camera is going off

When I press my volume up button it sounds like the camera is going off but no pictures are being taken. Any idea why this happens?
Thanks!

Hello there, JDHMB.
You might want to close out all apps first and foremost:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Then it might be worth attempting a restart of the iPhone, and then a reset, should that not resolve the issue.
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If the sound is still being generated by the phone while using volume controls, you may want to try restoring the iPhone.
iTunes: Restoring iOS software
http://support.apple.com/kb/HT1414
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

Similar Messages

Sounds like the camera

Whenever I turn the home screen on or off by pressing the on/off switch, I get a sound like the camera is taking a picture.
I have Lookout, which has an option to take the picture of anyone that enters the wrong password x number of times, but I have that disabled.
Does anyone know if this is a "feature" and if I can get rid of the sound? It's getting kind of annoying.

Then i would try Running the phone in Safe Mode and see what it does if the issue stops then you Know there is a 3rd party App that is possibly causing the issue at then you would want to remove each app one by one till the issue goes away). But if the issue remains then i would Look at Running a System Cache, or Doing a Factory Reset.. And as i mentioned in my earlier post holding down the power + lower Volume down will snap a screen shot but continuing to hold will power off the Razr it's referred to as a Power Cycle same thing as you use to do when pulling the Battery.. When i do a power Cycle i hold the button in for at least 30 sec...

I occasionally get a call and at the end of the call, it sounds like the camera is taking a picture. Anyone else ever experience this

I occasionally get a call and at the end of the call, it sounds like the camera is taking a picture. Anyone else ever experience this?

No, but when the other party hangs up first I have heard the click of the disconnect.

My camera flash goes off without me using the camera?

While using my Galaxy S-4 once in awhile the camera flash goes off while reviewing my emails or during something other than using the camera Has anybody have the same problem over the past month?
pb1945

I haven't seen it reported on the S4, but several S3 users mentioned it after the latest update that phone received. You might try going to Settings > Accessibility > Flash notification ... if the box is checked, uncheck it. If it isn't checked, check it and then uncheck it. I'd suggest then restarting the phone.

Music Sounds Like the Chip Munks singing

I have an a6537c Pavilion and the music sounds like junk. Sounds like the Chip Munks. What can I do?

Well... sounds like you have an audio enhancement enabled. There are a few places where they can be set. Check the following places to turn them off:
Windows Media Player 11
1. Play music
2. Right-click menu bar.
3. From the menu that opens, select View, Enhancements, and Play Speed.
4. Adjust the Play Slider to 1.0
Windows Sound (Realtek codec)
1. Right click the volume icon next to the time in the taskbar.
2. Select Sounds.
3. Select the Playback tab.
4. Select your default playback device denoted by a green circle with a check (probably Speakers).
5. With the playback device selected, click the Properties button.
6. Click the Enhancements tab.
7. Select Disable all sound effects.
8. Click OK.
Hope this helps.
... an HP employee expressing his own opinion.
Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you.

Strange. After importing a series of images from a Sony camcorder, I see the images but there's no sound, although there is sound on the camera.

strange. After importing a series of images from a Sony camcorder, I see the images but there's no sound, although there is sound on the camera.

Hi Jan,
Looks like a common problem, see if this is of any help...
http://www.bigasoft.com/articles/how-to-import-sony-handycam-avchd-mts-mpeg2-to- imovie.html

HD videos from Sony NEX-3 sound like the Chipmunks

My Sony NEX-3 720p MP4 videos sound like the Chipmunks. Video frame rate appears ok but the sound is way too fast. The files play nicely e.g. in Preview though.
iMovie imports the files nicely, using the internal SD reader in my iMac. However, the sound is out of sync in the imported files. From the sound of it, it seems the audio runs at least at 2x the speed.
Currently I use Handbrake for converting the camera clips into 25 fps m4v and then importing these into iMovie but it is a pain.

Can you tell me how you imported the video from your NEX-3 to iMovie? When I try, the camera automatically opens iPhoto and imports it there. If I open iMovie, all of the selctions are grayed-out so I can't import them. I've tried getting the video straight from the camera but can't seem to do that either. Can you help?

How to make it look like the camera is following a zig zagging line

I have an animated video where a person clicks a button and an arrow appears coming out of the right side of the computer. I would like to make it look like the camera follows the arrow as it zooms along a zig zag path and eventually ends at another computer. Does anyone know of any good tutorials for this?
Thanks,
Paul

This is just a matter of keyframes for camera position and point of interest.You are probably not going to find a tutorial that exactly matches your project. Try this:
Open up 2 views, one active camera, one top view.
Set a position keyframe for the camera where you want the movement to start.
Drag the point of interest to point at your subject (animated arrow)
Using the top view and setting the CTI (current time indicator) to the end point of the camera move, move the camera's point of interest to the same position as the animated arrow
Still in the top view, move the camera to it's final position
Using the pen tool (keyboard shortcut g) add points to the camera position path and drag them into a zig zag shape using the top view
Selecting the Point of interest in the timeline, adjust the position of the point of interest to follow the arrow as it animates across the screen by moving the CTI and setting new positions.
Another thing you could do would be just to use a lookAt expression for point of interest. This would keep the camera pointed at the arrow.
Hope this helps. Animating a camera is one of the most basic skills an AE artist should have. It takes a bit of practice but it's not hard.

When I play my Ipod shuffle 3rd gen there's a moment when I start hearing interference until it stops playing, when I turn it off and on again it starts playing from the first song all over again, and once it sounded like the music was slowing down.

My Ipod shuffle 3rd gen starts playing songs with some kind of interference until it stops playing, when I turn it off and on again it starts playing from the first song all over again, and once it sounded like the music was slowing down. First I thought it was the earphones, but I exchanged them for newer ones and so far its the same

You may want to do a Restore on the shuffle in iTunes. The Restore button is on the shuffle's Summary screen in iTunes. This will erase the shuffle, re-install its software, and set it to default settings. If it's a software or data corruption glitch, the Restore should fix it. After the Restore, reload or resync your songs, and try it again. As a test, you may want to initially select a small number of songs to put back on the shuffle.

How to disable the flash and sound of the camera o...

would I like to know how I do to disable the Flash and sound of the camera of N73?
or does anybody know about some software that makes that?

06-Dec-2008 08:30 AM
krizanand wrote:
hi suman,
i too faced this problem afetr updating it to new firmware,when i checked my application manager there was an application which opens only with the ZIP manager
it was troubling me a lot when i switch off and ON the phone time and again
Finally i did a RESET *#7370# the application was not reflecting in the App manager and the problem got resolved
Hope this works out for u
if it is i will be Glad cheers........... try it
Yes, that will solve all problems and as well as your data. There are alternatives which I already mentioned here. You can search to find the answer, since it to complicate to do it again.
C6-00 with 8GB MicroSD

How can I silence the sounds from the Camera, "klick (camera" and "ping (video)"?

I need some help. How can I silence the sounds from the Camera, "klick" (camera) and "ping" (video)? Sometimes you'd like not to let others know that you're taking a picture/recording.

My macbook pro won't stop making noise! It sounds like the fan but I'm not sure. Any ideas?

my macbook pro won't stop making noise! It sounds like the fan but I'm not sure. Any ideas? It's really worrying me because I haven't had it for up tp 2months and last week everytime I switch it on it makes sooo much noise. And I treat like an egg so I don't understand whats going on.

Hey,
My friend had a very similar issue to yours. The issue came down to the pins of the MagSafe not meeting with the MacBook perfectly causing the lights and the transfer of power to be wacko. I'm not sure if this is issue that your experiencing, but its worth checking out the pins and the MagSafe area on your MacBook for debris.
Troubleshooting Magsafe power adapters with stuck pins
If that is all clear, then I would suggest you call AppleCare or take it in to an Apple Store to have it checked out.
Tom

My recorded signal is not sounding like the signal I am monitoring.

My recorded guitar is not sounding like the signal I am monitoring. It sounds very good when recording, but lacks energy and detail when it is played back. If I am using input/direct monitoring am I also bypassing the Analog to Digital converters? Could this explain the difference in sound quality?
Would it be the same to monitor a signal directly out of the sound card and to monitor "through" Logic?
My sound card is a Presouns Firepod.

Mastergod wrote:
My recorded guitar is not sounding like the signal I am monitoring. It sounds very good when recording, but lacks energy and detail when it is played back. If I am using input/direct monitoring am I also bypassing the Analog to Digital converters? Could this explain the difference in sound quality?
Yes.
Would it be the same to monitor a signal directly out of the sound card and to monitor "through" Logic?
No.
My sound card is a Presouns Firepod.
Consult the manual of that device, to see if you can learn from where in the signal chain it gets your direct monitoring from --- PRE conversion or POST conversion... My bet is that it is pre conversion.
Cheers

I just synced my phone with my ipad. now, every time I push any button on my 4s phone, it takes a picture. The camera is going crazy!

I just synced my phone with my ipad. Now, everytime I push any button on my 4s phone, it takes a picture. THe camera is going crazy!

Hello lroberto285,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Frozen or unresponsive iPhone
http://www.apple.com/support/iphone/assistant/phone/
Try sections 1, 3, and 5
Best of luck,
Mario

I'm using GarageBand 10.0.1. Do the built-in drum tracks only come in mono format, or is it possible to make them true stereo (i.e. Left and Right channels outputing different signals, to sound like the kit has been panned across the stereo field)?

I'm using GarageBand 10.0.1. Do the built-in drum tracks only come in mono format, or is it possible to make them true stereo (i.e. Left and Right channels putting out different signals, to sound like the kit has been panned across the stereo field)?

All the Drum Kits available for GarageBand are mixed in stereo.
Logic provides the same 18 Drum Kits also as "Producer Kits", which are multi-track outputs,. Each Drum Kit Piece (Kick, Snare, HH, etc) and also room mice and overheads are routed to individual channel strips.
Here is a screenshot of one Drum Kit in Logic Pro X with individual Channels Strips. Each Channel Strip can be loaded with individual effects (compressor) and adduced with individual sends, etc.
What that means is that all the Drummers are professionally recorded and sampled with individual mics. The Stereo Drums Kits are just "stereo mix-downs" for easier handling and less CPU demand. I explain all the details about the Drummer ecosystem in my graphically enhanced manual "GarageBand X - How it Works"
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

Volume up button sounds like the camera is going off

Similar Messages

Maybe you are looking for