Volume using dock is WAY different than with buds

I am a surgical resident, and I bring my ipod with me to the OR all the time; I use the JBL soundstage in the OR. The problem is, all of the songs that I bought through iTunes are WAY louder than everything else.
I have used MP3gain. I've gone through all my .m4a and iTunes store songs and adjusted them one-by-one. The only difference it makes is with the earbuds.
The Killers are whisper quiet in my headphones and way too f-ing loud in the OR.
Please help.
If not for me, than for my pateint's sake.

And yes, I have used sound check, and it made no difference

Similar Messages

Why is WB temperature way different than what's set in my camera?

I did search for the topic before I posted and only one relevant post came up (in the last month) which moreless confirmed the same issue with a different camera.
I shoot Olympus E1, so I dialed 7500K and fired a shot. Imported into Aperture and looking at WB scale and it reads 6186K. The image looks as if Aperture showed the image correctly, but the number is way off. 1300K difference??? So obviously if I move it to 7500 it will not be correct anymore because it will be rather 8800 in reality.
Second thing I did right after, was to look at EXIF and sure enough Aperture showed no value in WB field.
For a comparison purpose I looked at the shot in ACR and found out that the temperature was spot on. So this is not rather whether Olympus is hiding the value so it's difficult to retrieve, but rather how is Aperture coming up with so wrong figure.
I am also curious how can Aperture get the image colored correctly if it cannot figure out the set WB value in camera properly.
Puzzling to say the least and confusing possibly for processing work.
Thanks
Marek

Hi Marek,
There are a couple ways you can get white balance "right."
1) You can shoot a grey card (or something like an ExpoDisc) in the field and then set the white balance of the camera onsite.
2) You can shoot the same grey card onsite and leave the camera on AWB, and shoot everything. Then go back and eyedropper the grey card and batch change all your photos.
#2 is quicker... but they both work equally well.
But practically you will not "get it right" by setting the white balance to a preset in the field. "Daylight" at 5000K (or whatever the setting in your camera is), is a total WAG. The actual color temperature may be 4500K or 6300K in that setting -- you will have very little chance of getting it right by picking an auto setting. You COULD break out a spectropherometer and measure and find it is 5002K so use 5000K in camera, but again if Aperture came up with 4837 you'll still want to edit later.
If you are "serious about your shooting" where "serious" means accurate, then you are going to be shooting indoors under controlled lighting conditions. You will also shoot with a full GMB card which has all the colors and tints and hues, so you can get absolutely correct colors (HELLO, FASHION AND ADVERTISING PHOTOGRAPHY). If you do landscape, then color temperature, as is contrast and a number of other things, is open to interpretation. When I was shooting with Seth Resnick in Antarctica a few weeks back, his rule of thumb was basically "Start at 6500K and warm it up from there." lol. Still, his images are beautiful.

Html from flash 9 WAY different than flash MX

Does flash 9 do something majorly different with ActiveX or
something?
After "publishing" a flash 9 slide show to html, it shows NO
swf content in dreamweaver. Yet this show plays. Problem is, it
wont align and now there is no alignment options, even tho the code
says center.
There is also a lot of code for accessibility, and detecting
flash player #?
Can I "downgrade" this show to flash MX? It wont open in
Flash 9 (CS3) now so i can't just do it the old way.
It's all action script 2
Anyone?

in flash cs3 create AS2 document instead of AS3

Using digital tv in different countries with ATSC/M and DVB/PAL formats

Are there any Toshiba LED/LCD/plasma models 40-42" that will function with both DVB and ATSC digital formats and M (NTSC) and PAL analogue formats?

Alex,
This is sort of the holy grail for me as well, I've got an upgraded PC with a dual analog tuner and a single DTV tuner on it - for now I'm using a TV antenna to get DTV transmissions and using the analog for ch 2-83 cable. Not ideal, but the OTA stuff is great. One side benefit - it still records in .DVR-MS format, which most applications know what to do with. Not too many out there that know what to do with .WTV format that the update pack (Fiji) creates.
From what I understand - if you have a newer QAM tuner and driver - Win7 should bring it all together. Maybe by then the video editing packages will be able to handle the new format as well.
-dm (an HP employee, but the comments/suggestions are mine, not my employers).
-DM (HP Retiree)
NOTE: If this helps you or solved your problem - please say thanks by clicking the white kudos star on the left.
If you think this would also help others, please mark 'Accept as Solution' to help them find it easier.

How to use acquired values for different treatments with NI 9188 cDAQ

hi guys, I am trying to use NI DAQ 9188 chasis with 9214 temperature measurement module. I wired 3 modules to the module and split signals. But I am not sure that I can these values into functions vis easily. I am trying to convert them into 1D array, but when I converted to the 1D array I can not see the values and use separetely from each other. For example, I want to multiply just the first value taken from 1st thermocouple. how could I do this. Additionally, the signals in the waveform chart 1 is not smooth. what is the reason of this? thanks in advance.
Egemen
Solved!
Go to Solution.
Attachments:
DAQ_v1.vi ‏82 KB

Hi newbieeng,
It sounds like what you want to use is the Index Array function. You should use the Convert From Dynamic Data function on the signal coming from the DAQ Assistant and then use the Index Array function to access the apropriate data on which you would like to operate. Please refer to the help documentation for more information on the Index Array function. As far as smoothening the signal, try adjusting the properties of the graph, such as Autoscale X and some others in the Properties window.
Regards,
James D.
Applications Engineer
National Instruments

Adobe Muse Displays Colours WAY differently than Web Browsers

Hello, I did a live chat about this and he refered me to post here. I tried reinstalling Muse and reseting preferences but this didn't work. Colours displayed in Adobe Muse appear dirastically more vibrant than in all web browsers. It's not just subtle, It's a a fairly noticable difference and it makes it hard to design accuratly.
Here is how the colours look in muse:
And in the web browser:
Thanks to all in advance!

Hello,
You can simply copy the URL (that is there in the browser's address bar when you preview in Browser from Muse) and paste it to any other browser's address bar, then hit enter to see how that looks in other browsers.
Cheers
Parikshit

Can I use Creative Cloud in different desks in different countries with the monthly payment method? Thanks

I live between Europe and Asia..is possible use Creative Cloud in different countries with the same account?
Thanks.

it doesn't matter for continued licensing.
it's no different than the situation of many people who 'vacation' and take their adobe programs with them (and have no difficulty).

I had my itunes acct with a yahoo mail, now Im using icloud with my apple id, which is different than itunes I had. how can I merge this 2 accounts? I still have money in my old itunes acct. 2 acct

I had my itunes acct with a yahoo mail, now Im using icloud with my apple id, which is different than itunes I had. how can I merge this 2 accounts? I still have money in my old itunes acct. 2 acct

Is your phone still signed in with your old iTues ID for iCloud (in Settings>iCloud)?

More efficient ways to deal with query than using IN clause???

There is a module in an application that I wrote that under certain circumstances executes a query that looks something like the following:
SELECT field1, field2
from table
where id in (1,2............1000)
OR id in (1001,1002.............2000)
OR id in (59000, 59001.................60000);
To clarify... Yes.. I am saying that because of oracle's limitation on 1000 expressions in an IN clause, there would be up to 60 different IN clauses.
When I initially wrote this module... I wasn't aware of the volume of data that I was dealing with. I fully expect that when running this module with real data, it is going to be painfully slow. I am also worried about out of memory errors. Does anyone have suggestions? Thanks!
Btw... This is using ORACLE 10g

Depending on the number of rows in the table, I would tend to look at loading the ID's into a temporary table and then using that temporary table in your search, i.e.
SELECT field1, field2
FROM table
WHERE id IN (SELECT id FROM new_temp_table)or
SELECT field1, field2
FROM table a
WHERE EXISTS (
    SELECT 1
      FROM new_temp_table b
     WHERE a.id = b.id )Of course, if the logic for figuring out the 60,000 ID's you want to search on can be expressed as a SQL query, you could replace the temp table in the above examples with that particular SQL expression.
Justin

Im using an ipad mini and recently it started to act way wiered than i ever imagined.whenever i switch it on it would open or close apps of its choice and function without my interference.it's like auto touch.what should i do with this?

im using an ipad mini and recently it started to act way wiered than i ever imagined.whenever i switch it on it would open or close apps of its choice and function without my interference.it's like auto touch.what should i do with this?

That could be a hardware problem with the screen digitizer but first try these troubleshooting steps in this order:
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds). No data will be lost.
Restore: Connect your device to iTunes on your computer, backup, and then select Restore to Factory.
See here for more details on restore: https://support.apple.com/en-us/HT201252
If none of these work your device may have developed a hardware problem. Contact Apple Support: http://www.apple.com/contact/

A different way to deal with "unknown" user after upgrade from Tiger.

It's a known issue that doing upgrade and install or archive and install from Tiger to Leopard, produces a lot of folders with "unknown" group in their "get info" panel. This has to do with a different group structure in Tiger and Leopard.
In Tiger, every user has their own private group with the same name as the username. That group is set to be user's primary group.
In leopard, every new user with an account is a member of the group staff (gid=20) which is not present in Tiger. Leopard doesn't fully understand Tiger's private group structure, hence the "unknown" group. This causes various problems such as Finder crashes when trying to change the permissions and ownership in the get info window.
Apple's proposed way of dealing with this is described [here|http://docs.info.apple.com/article.html?artnum=307128].
However, this method doesn't change the existing group structure and doesn't resolve all the problems.
I'd like to suggest a different way of dealing with it.
1. create a new admin user (if you don't have one already), log out of your primary account and log into the new one.
2. enter the following in terminal:
*sudo dscl . delete /users/"username"*
where username is the short name of the user on the main account (not the one you are currently logged into).
This will delete that user.
3. Log out/in.
4. go to system preferences->accounts and create a new user with the name and short name exactly as the one you've deleted in step 2.
You'll be get a popup saying that a home directory by this name already exists and asking if you want to use it. Say "Yes".
That's it. Your main user will be recreated using the native group structure of Leopard with gid=20(staff). Permissions on your home directory will be reset with correct group and ownership.
I tested the process on my powerbook after an upgrade and install from Tiger to leopard and it worked without a hitch.
I like this method better than Apple's because it completely gets rid of Tiger's group structure which was creating all the confusion. The only downside as far as I can see is that you might have to manually change the group ownership on some files belonging to the main user that sit outside your home directory.
I would appreciate any comments on this.

hmm, I confess, I did this before installing 10.5.2 so i can't say for sure. However, I've dealt with a few people (see e.g. this [thread|http://discussions.apple.com/thread.jspa?messageID=7012957]) who are running 10.5.2 and still have this issue. I don't know what if anything 10.5.2 did about this but I'm quite sure that it didn't change the group structure inherited from Tiger.
Message was edited by: V.K.

XmlDataProvider .... is gone completely in my Xaml file. Why? How many different ways to deal with xml data source through WPF

I followed a procedure described in a book.
1. insert "Inventory.xml" file to a project "WpfXmlDataBinding" .
2. add the XML data source through the data panel of "blend for 2013", named it "InventoryXmlDataStore" and store it in the current document.
3. dragged and droppped the nodes from the Data panel onto the artboard.
Then I checked my Xaml file against the one provided by the book
Xaml file by the book:
<Window.Resources>
<XmlDataProvider x:Key="InventoryDataSource"
Source="\Inventory.xml"
d:IsDataSource="True"/>

<DataTemplate x:Key="ProductTemplate">
<StackPanel>
<TextBlock Text="{Binding XPath=@ProductID}"/>
<TextBlock Text="{Binding XPath=Cost}"/>
<TextBlock Text="{Binding XPath=Description}"/>
<CheckBox IsChecked="{Binding XPath=HotItem}"/>
<TextBlock Text="{Binding XPath=Name}"/>
</StackPanel>
</DataTemplate>
</Window.Resources>
<Grid>
<ListBox HorizontalAlignment="Left"
ItemTemplate="{DynamicResource ProductTemplate}"
ItemsSource="{Binding XPath=/Inventory/Product}"
Margin="89,65,0,77" Width="200"/>
</Grid>
my Xaml file:
<Window x:Class="WpfXmlDataBinding.MainWindow"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
Title="MainWindow" Height="922" Width="874">
<Window.Resources>
<DataTemplate x:Key="ProductTemplate">
<StackPanel>
<TextBlock Text="{Binding XPath=@ProductID}"/>
<TextBlock Text="{Binding XPath=Cost}"/>
<TextBlock Text="{Binding XPath=Description}"/>
<CheckBox IsChecked="{Binding XPath=HotItem}"/>
<TextBlock Text="{Binding XPath=Name}"/>
</StackPanel>
</DataTemplate>
</Window.Resources>
<Grid DataContext="{Binding Source={StaticResource InventoryXmlDataStore}}">
<ListBox HorizontalAlignment="Left" Height="370"
ItemTemplate="{DynamicResource ProductTemplate}"
ItemsSource="{Binding XPath=/Inventory/Product}"
Margin="65,55,0,0" VerticalAlignment="Top" Width="270"/>
</Grid>
</Window>
All looks quite the same except the <XmlDataProvider ....> part under <Window.Resources>, which is gone completely in my Xaml file.
1, Why?
2, How many different ways to deal with xml data source through WPF?
Thanks, guys.
(ps My "WpfXmlDataBinding" runs without problem through.)

Never do yourself down Richard.
Leave that to other people.
It's quite common for smart developers to think they're not as good as they are.
I coach a fair bit and it's a surprisingly common feeling.
And to repeat.
Never use anything ends .. provider. They're for trivial demo apps. Transform xml into objects and use them. Write it back as xml. Preferably, use a database.
You want to read a little mvvm theory first.
http://en.wikipedia.org/wiki/Model_View_ViewModel
Whatever you do, don't read Josh Smiths explanation. I used to recommend it but it confuses the heck out newbies. Leave that until later.
Laurent Bugnion did a great presentation at mix10. Unfortunately that doesn't seem to be working on the MS site, but I have a copy. Download and watch:
http://1drv.ms/1IYxl3z
I'm writing an article at the moment which is aimed at beginners.
http://social.technet.microsoft.com/wiki/contents/articles/30564.wpf-uneventful-mvvm.aspx
The sample is just a collection of techniques really.
I have a sample which involves no real data but is intended to illustrate some aspects of how viewmodels "do stuff" and how you use datatemplates to generate UI.
I can't remember if I recommended it previously to you:
https://gallery.technet.microsoft.com/WPF-Dialler-simulator-d782db17
And I have working samples which are aimed at illustrating line of business architecture. This is an incomplete step by step series but I think more than enough to chew on once you've done the previous stuff.
http://social.technet.microsoft.com/wiki/contents/articles/28209.wpf-entity-framework-mvvm-walk-through-1.aspx
The write up for step2 is work in progress.
https://gallery.technet.microsoft.com/WPF-Entity-Framework-MVVM-78cdc204
Hope that helps.
Recent Technet articles: Property List Editing;
Dynamic XAML

I am having a problem with homesharing on my apple tv. The email address on my tv is different than what I am registered with. How do I correct the email address that is being displayed under home sharing on the apple tv?

Somehow my apple id email address under homesharing on my apple tv is different than that used for homesharing on itunes in my imac. I can't access home sharing on my apple tv because of this. Can you please tell me how to change it on the apple tv in order to get homesharing to work?

turn off home sharing on apple tv, then turn it on again, entering new credentials. Apple-TV works very reliably with home sharing unlike iDevices which don't

I have a mid-2009 MBP and I've been using my BOSE Companion 20 with it for about half a year now. It was fine until recently, when i want to adjust the volume using the pod on the BOSE Companion 20, it will cause like a surge in volume, spiking it up

I have a mid-2009 MBP and I've been using my BOSE Companion 20 with it for about half a year now. It was fine until recently, when i want to adjust the volume using the pod on the BOSE Companion 20, it will cause like a surge in volume, spiking it up and down. It will not stablise itself! It's very fustrating. Anybody with the same issue?

I have the BOSE Companion 5 speakers and have had the same problem. I've searched everywhere and gotten nowhere. My speakers are way past their warranty, so calling Bose would probably get me no where either. Only thing I can think of is that the speakers overheat which causes the spikes in the volume. I've tried unplugging them for a few minutes and then plug them back on. The problem does go away, but after about 5 minutes, same problem.

Can I use two different devices with different apple ID for backing up data on one machine without losing any data that was backed up with one device earlier?

Can I use two different devices with different apple ID for backing up data on one machine without losing any data that was backed up with one device earlier?

The link is to a discussion started on 12/18 in the FiOS Internet forum. Here's the link I get now, however it is different than the link I pulled a few hours ago. If this system changes the link again, it may not work.
http://forums.verizon.com/t5/FiOS-Internet/Frustration-and-just-confused-with-internet-help-please/t...
You can also look for the topic, "frustration and just confused" in the FiOS Internet forum.
Here's a link that is in the thread that gives more detail.
https://secure.dslreports.com/faq/15984
Good Luck!
P.S. "Copper Contributor" is my "rank." gs0b is my user name.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Volume using dock is WAY different than with buds

Similar Messages

Maybe you are looking for