Volumes could not be started.

OS: Mac Os X 10.4.11
Xsan: 1.4.2
There are three logic volumes (RAIDL1, RAIDL2 andRAIDL3) created by Xsan, RAIDL1 and RAIDL3 could be started normally, but RAIDL3 could not. The followings are the error log:
[0511 10:51:53.447000] 0x1801000 (Debug) sigwait handler starting
[0511 10:51:53] 0xa000ed88 (Info) Server Revision 2.7.201 Build 7.40 Built for Darwin 8.0 Created on Thu Oct 11 19:05:39 PDT 2007
[0511 10:51:53] 0xa000ed88 (Info)
Configuration:
DiskTypes-4
Disks-4
StripeGroups-2
ForceStripeAlignment-1
MaxConnections-75
ThreadPoolSize-128
StripeAlignSize-256
FsBlockSize-4096
BufferCacheSize-32M
InodeCacheSize-8192
RestoreJournal-Disabled
RestoreJournalDir-None
[0511 10:51:53] 0xa000ed88 (Info) Self (192.168.0.180) IP address is 192.168.0.180 .
[0511 10:51:53.455119] 0xa000ed88 (Debug) No fsports file - port range enforcement disabled.
[0511 10:51:53] 0xa000ed88 (Info) Listening on TCP socket 192.168.0.180:64082
[0511 10:51:53] 0xa000ed88 (Info) Node [0] [192.168.0.180:64082] File System Manager Login.
[0511 10:51:53] 0xa000ed88 (*FATAL*) PANIC: /Library/Filesystems/Xsan/bin/fsm "Inodeinit_preactivation: InodeInode version mismatch! expected-0x203 or 0x204, received-0x76777776
" file inode.c, line 5696
[0511 10:51:53] 0xa000ed88 (*FATAL*) PANIC: aborting threads now.
Huge useful data is stored in this volume, please help!!!

There have been about four previous posts for the same error. It looks like those may hp you. You can find those by using the search function on the right and search the iPad forum for:
"session could not be started"
Use the quote marks.

Similar Messages

Airport Extreme/Time Capsule backup volume could not be found?

I am having problem with Time Machine. When I try to backup using Time Machine, I get an error message, " The backup volume could not be found." Strangely, Time Machine recognized the drive when setting the Time Machine preferences, but not when I backup.
If i select from the 'select disk' again and try again i get Keychain Access error 25299 and have to delete that in the Keychain for it to even get to the point of counting down to start back up
I have erased my Time Capsule recently and was starting fresh but now i cannot get time machine running again...
In the shared section of the finder the time machine backup is only appearing in the network area rather than directly there...
Any ideas?
Many thanks.

Hi there.
I would suggest First Aid of your Keychain, but that hardly ever works (especially in this situation).
What I would do first, is go to ~/Library/Keychains/, grab the login.keychain and move it to the desktop. Log out, and log back in again. If that fixes it, then get the old login.keychain from the desktop and put it in the trash. (You will lose all your saved passwords for networks etc.)
If that doesn't work, unfortunately the only option would be to do an Archive & Install.
So you just need to put your 10.6 disk in again and install over the system.
Your personal data/files should still remain intact. Although I would still suggest making a backup (ironic considering the situation)
Cheers
Taylor

The backup volume could not be found

Spent a fair amount of time on the phone with Apple last night trying to get my Macbook Air to work with Time Machine/Time Capsule.
Symptoms of my problem included Time Machine Preferences giving the error "The backup volume could not be found"
Console messages complaining about not being able to find the MAC address for machine:
(console is accessed by clicking Go -> Utilities -> Console from the Finder, and then selecting All Messages)
11/7/08 11:06:13 AM System Preferences[123] *Time Machine failed to get MAC address for machine.*
11/7/08 11:13:09 AM /System/Library/CoreServices/backupd[1603] Starting standard backup
11/7/08 11:13:09 AM /System/Library/CoreServices/backupd[1603] Network mountpoint /Volumes/Time Capsule not owned by backupd... remounting
11/7/08 11:13:09 AM kernel AFP_VFS afpfs_mount: /Volumes/Time Capsule-1, pid 1604
11/7/08 11:13:09 AM /System/Library/CoreServices/backupd[1603] Network volume mounted at: /Volumes/Time Capsule-1
11/7/08 11:13:09 AM /System/Library/CoreServices/backupd[1603] *Volume at path /Volumes/Time Capsule-1 does not appear to be the correct backup volume for this computer. (Cookies do not match)*
11/7/08 11:13:09 AM /System/Library/CoreServices/backupd[1603] Backup requested due to disk attach
11/7/08 11:13:14 AM /System/Library/CoreServices/backupd[1603] *Backup failed with error: 18*
And my only network interface was showing up as en1 (instead of en0). You can check this by using Network Utilities:
- On the Finder main menu bar click Go -> Utilities -> Network Utilities
If "Network Interface (en0)" is not an option in the drop down list under "Please select a network interface for information" (mine was showing as en1), then the following steps will probably solve your problem:
1) Enable the root user
- Open the finder
- On the Finder main menu bar click Go -> Utilities -> Directory Utility
- On the menu bar click Edit -> Enable Root User
- set a password (they suggested using the same password as is used for the main user account)
2) Login as the newly enabled root user
- Click Log Out... from the Apple menu on the main menu bar
- select "Other" at the login screen
- enter the user name "root" and the password you set in step 1
3) Drag Preferences folder to the desktop
- open the finder, and click on Macintosh HD and then Library
- drag the Preferences folder onto the desktop
4) Restart the computer
- Click Restart from the Apple menu on the main menu bar
After this, the Network utility should show "Network Interface (en0)", and Time Machine should work.

Jackson,
See this article for the reasons why you see "Time Capsule-1 does not appear to be the right volume..."
[http://discussions.apple.com/thread.jspa?messageID=8116036&#8116036]
As for the error message you are getting, here are several reasons why you would see this message...
*_"Backup Volume Could Not Be Found"_*
First, it is important to distinguish this error message from another, similar Time Machine error that states, “The backup volume could not be mounted”. This is important as the causes and cures for these two errors can be very different.
*Reselect Your Time Machine Disk*
(http://support.apple.com/kb/TS1329)
In the Finder, go up to the "Go" menu and select "Connect to Server".
Click the "Browse" button at the dialogue box.
In the Network window that opens, do you see your TM drive?
Double click it to mount the drive.
Now let's try to reselect it for Time Machine use.
Go to System Preferences --> Time Machine.
Click the "Change Disk..." button.
Select "None" and click "Stop Backing Up".
Now click "Choose Backup Disk" and reselect your drive again.
Close System Preferences and try backing-up again.
On the other hand, does your Time Machine drive NOT appear at all? Is it appearing on your desktop? If it is still connected try disconnecting the cable, waiting a few seconds and then reconnecting the cable. Does the drive mount on the desktop? Try initiating a backup now.
*Disk Fails to Wake From Sleep*
“If your external HD has a sleep function that does not wake for Time Machine backups. Time Machine will alert you that "The backup volume could not be found", and backups will not be made.” [http://support.apple.com/kb/TS1337]
*3rd-Party Disk Utilities* #
Many external hard disks come with software for maintaining/monitoring hard disk activities. It may have come on a separate CD or been installed on the drive itself. If these programs have been installed they may interfere with Time Machine backups, generate erratic behavior, or cause the drive to ‘disappear’ altogether.
You may never know these applications are there as they may be running in the background. Go to System preferences --> Accounts. Select your account in the pane on the left. Click “Login Items”. Are there any items listed there that might refer to hard disk utilities. If so remove them using the “-” button at the bottom.
*Delete Time Machine Preference .plist*
It may be that the preference list that stores the name of your designated backup disk has become corrupted.
Go to --> Macintosh HD / Library / Preferences (Note: NOT Home / Library / Preferences).
Drag the .plist file labeled,
com.apple.TimeMachine.plist
to the root level of your Macs’ hard drive.
Reboot your computer.
This .plist file is automatically recreated at startup if it is missing.
Now try choosing the external HD in the TM Prefs for backup.
*Time Capsule Has a Long Name*
“When using your Time Capsule for Time Machine backups in Mac OS X 10.5 Leopard or later, the Time Capsule backup volume may not mount and Time Machine may not be able to back up to it. This alert may appear: "Backup volume cannot be found". This can happen if the Time Capsule disk has a long name. [http://support.apple.com/kb/HT1170]
Open AirPort Utility (in /Applications/Utilities).
Click your Time Capsule's icon.
Click "Manual Setup".
Enter the password for the Time Capsule if prompted.
Click the Disks icon.
Highlight the volume name that appears under "Time Capsule Disk".
In the Name field, enter a name for the volume that is less than 27 characters long.
Click Update.
After Time Capsule restarts, on the Mac(s)using Time Machine, open Time Machine preferences and reselect the Time Capsule volume.”
Let us know if any of these suggestions help.
Cheers!

Time Machine Contradiction: "The backup volume could not be mounted"

(This is only one wireless issue I've had this year, but I'm trying to keep this brief -- hoping clarity will instigate some help.)
Recently I bought a Western Digital 500GB drive to go with my AEBS. I was intent upon using the drive as an Airdisk for Time Machine backups, but it isn't working. (I also have the WD drive partitioned in halves, but there is no reason to believe that is an issue.) When wired, the disk backs-up quickly and easily. After the initial backup, and attempting to do so wirelessly, however, it doesn't work. I get the message: "The backup volume could not be mounted."
And there's the contradiction: the disk is mounted, I'm looking at the mounted disk as I type -- I even have no problems reading and writing from the Airdisks independent of Time Machine. I have all the latest software updates and am running Leopard. I've been going at this for hours, but I would really appreciate some help.
Here are some of the things I've tried:
-checking all connections
-erasing the Airdisk and starting from scratch
-repairing disk permissions(on my internal harddrive, the one I boot on, not the WD)
-attempting to "Connect to Server" in the Finder, only to get this:
And if you look, you can see that while the Airdisks are there, they are grey and can't be selected. It
never becomes possible to select them, and "Connecting to Server" never connects.
-I've toggled every Airport Utility setting to no avail(I will admit I might have missed something though).
-I've done everything I can think of
-banged my head into walls...
-and pulled my hair out, but nothing.
I really would like to get this working. This is my worst Apple experience yet, and it is literally making me sick. You will be my God if you can help me with this. Let me know if you need anymore information. Thanks in advance.
<Edited by Moderator>

Okay, so it seems you need to do initial Time-Machine-ing over WiFi if you intend to use it that way. Why nobody at Apple mentioned this baffles me; why this is even a problem, makes me wonder if Time Machine went through adequate testing.
So my problem is solved! I am my own God!
<Edited by Moderator>

Time Machine - "The backup volume could not be mounted" alert

This is a heads-up for anybody suffering from this error when performing Time Machine backups:
"The backup volume could not be mounted"
I had been using this facility fine for months until a few days ago when backing up mysteriously failed. The Apple support KB articles didn't help (eg, reset time machine drive setup, etc).
Apple Support didn't want to help me because they don't "support backups over networks" - sheesh! What happened to "Think Different!"??
Drag and drop your SPARSEBUNDLE file from your backup drive to the Disk Utility.
Perform a Verify Disk operation by clicking on the button.
A normal backup should be able to perform this procedure, but a corrupted one won't.
When trying to perform this on my backup, the Disk Utility would simply return to the original screen without performing anything a second after pressing the button.
In this case, I found deleting the old backup file and starting from scratch restored my computers ability to perform automated Time Machine backups.
I have concluded that the backup file became corrupted in some way - several previous posts have pointed to systems going into standby while backing up files as the cause of this.
Hopefully someone finds this useful one day.

There is a Time Machine preferences file at
<your startup drive root>/Library/Preferences/com.apple.TimeMachine.plist
Note: This is be main Library folder, not the one in your user folder.
You might try moving that to the Desktop so that the system creates a new one.

Backup volume could not be found

Time Machine is unable to back up my system because it continues to experience the following error: Delayed. The Backup volume could not be found. Each time I plug in the TM drive, the icon spins like a backup is starting then the error takes place. So it knows the drive is present but then it rejects it.
Could this have anything to do with the recent repair service I received? From what I can tell, the machine was pretty much gutted: Logic board/mother board/video card, etc.
Thoughts to get me running again?
Thanks in advance,
Shawn

ShawnCSX wrote:
Time Machine is unable to back up my system because it continues to experience the following error: Delayed. The Backup volume could not be found. Each time I plug in the TM drive, the icon spins like a backup is starting then the error takes place. So it knows the drive is present but then it rejects it.
Could this have anything to do with the recent repair service I received?
From what I can tell, the machine was pretty much gutted: Logic board/mother board/video card, etc.
yes. after a logic board change you either need to start a new backup series (reselect the TM drive in TM system preferences) or re-pair the TM drive with the new logic board. Follow this [macosx hint|http://www.macosxhints.com/article.php?story=20080128003716101&query=repai r%2BTime%2Bmachine].
Thoughts to get me running again?
Thanks in advance,
Shawn

Everything was OK - now have "The backup volume could not be found" error

Setup:
* MacBook Air
* MacBook 10.5.5
* Mac Mini with external hard drive with 2 partitions, one of which is called "Time Machine", 10.5.5
What was working:
MacBook Air and MacBook would backup with Time Machine over wireless connection to .sparseimage files on the "Time Machine" volume connected to the Mac Mini.
Change:
Had to give the MacBook Air back to my old employer, so I "merged" the MacBook Air onto the MacBook (the merge was somewhat convoluted, and unrelated to my issue I think: I used SuperDuper to copy the MacBook Air hard drive onto a new SATA notebook drive. Then I installed that drive in the MacBook. Then I used Migration Assistant to copy the user from the original MacBook SATA drive onto the new drive in the MacBook. Now I have two users on the MacBook, whereas before I had one use on each of two computers).
Symptom:
Now I cannot use Time Machine to backup the MacBook to the "Time Machine" volume. Everything I've tried causes Time Machine to briefly "prepare" the backup, then return the error "The backup volume could not be found". Things I've tried:
* Mounting the volume "Time Machine" on the MacBook, under either user, works fine - I can write, read, and delete from the volume.
* Deleting the old .sparseimage backup files from the "Time Machine" volume.
* Erasing the "Time Machine" volume with Disk Utility on the Mac Mini.
* Using "Change Disk..." in Time Machine to re-select the volume "Time Machine"
* Using "Change Disk..." in Time Machine to select None, then restarting, then re-selecting the volume "Time Machine"
* Making the volume "Time Machine" read/write by guests, then connecting to it from the MacBook as a guest instead of as an admin user.
* Repairing permissions and/or repairing disks using Disk Utility on all applicable volumes.
* Tried all of the above under both users on the MacBook (both of whom are Admin users)
None of these things have worked, they all exhibit the same symptom when I manually start a time machine, or when I wait for Time Machine to automatically start the backup.
Any ideas of what I can try next?

Consider these reasons for this error...
*_"Backup Volume Could Not Be Found"_*
First, it is important to distinguish this error message from another, similar Time Machine error that states, “The backup volume could not be mounted”. This is important as the causes and cures for these two errors can be very different.
*Reselect Your Time Machine Disk*
(http://support.apple.com/kb/TS1329)
In the Finder, go up to the "Go" menu and select "Connect to Server".
Click the "Browse" button at the dialogue box.
In the Network window that opens, do you see your TM drive?
Double click it to mount the drive.
Now let's try to reselect it for Time Machine use.
Go to System Preferences --> Time Machine.
Click the "Change Disk..." button.
Select "None" and click "Stop Backing Up".
Now click "Choose Backup Disk" and reselect your drive again.
Close System Preferences and try backing-up again.
On the other hand, does your Time Machine drive NOT appear at all? Is it appearing on your desktop? If it is still connected try disconnecting the cable, waiting a few seconds and then reconnecting the cable. Does the drive mount on the desktop? Try initiating a backup now.
*Disk Fails to Wake From Sleep*
“If your external HD has a sleep function that does not wake for Time Machine backups. Time Machine will alert you that "The backup volume could not be found", and backups will not be made.” (http://support.apple.com/kb/TS1337)
*3rd-Party Disk Utilities* #
Many external hard disks come with software for maintaining/monitoring hard disk activities. It may have come on a separate CD or been installed on the drive itself. If these programs have been installed they may interfere with Time Machine backups, generate erratic behavior, or cause the drive to ‘disappear’ altogether.
You may never know these applications are there as they may be running in the background. Go to System preferences --> Accounts. Select your account in the pane on the left. Click “Login Items”. Are there any items listed there that might refer to hard disk utilities. If so remove them using the “-” button at the bottom.
*Time Capsule Has a Long Name*
“When using your Time Capsule for Time Machine backups in Mac OS X 10.5 Leopard or later, the Time Capsule backup volume may not mount and Time Machine may not be able to back up to it. This alert may appear: "Backup volume cannot be found". This can happen if the Time Capsule disk has a long name. [http://support.apple.com/kb/HT1170]
Open AirPort Utility (in /Applications/Utilities).
Click your Time Capsule's icon.
Click "Manual Setup".
Enter the password for the Time Capsule if prompted.
Click the Disks icon.
Highlight the volume name that appears under "Time Capsule Disk".
In the Name field, enter a name for the volume that is less than 27 characters long.
Click Update.
After Time Capsule restarts, on the Mac(s)using Time Machine, open Time Machine preferences and reselect the Time Capsule volume.”
Let us know if any of these suggestions help.
Cheers!
Message was edited by: Glenn Carter

Time Machine: Backup Volume Could not be Found

I recently upgraded to Leopard. I have a brand new Lacie external hard drive.
I have tried to use Time Machine with the Lacie HD, but it fails and gives me this message, "Backup volume could not be found."
I did some troubleshooting. I tried to reformat the HD, but that gave me errors as well, stating "Could not unmount disk"
The HD is currently formatted to Mac OS Extended.
I am not certain if this is a problem with the HD, or just user error! I also had problems with iTunes when I tried to move the Library to the HD. I got and error message stating "you don't have sufficient privileges"
I only have 2.5G left on my internal HD, so I am a bit concerned. Any guidance would be much appreciated!!

when you select the TM hard drive in disk utility (the model, not the name) look at the bottom of the DU window. Do you see the line
Partition Map Scheme : GUID Partition Table?
Also, I looked at your first post again and it says that you only have 2.5GB of space available on your main drive. I don't know how big your hard drive is but that's a tiny amount. You need to offload part of your data to a different drive ASAP. when free space gets that low, disk fragmentation becomes a very serious issue. system slows done and start behaving in unpredictable fashion. This can lead to all sorts of problems including directory damage. Run "verify disk" on your main drive and see if any errors are reported. I don't know for sure if this is related to your TM problems but it very well might be.

ERROR 18 : "The backup volume could not be found."

My time machine has been relatively smooth sailing...until today. After accidentally cutting power to backup drive, I power it back up, shows on desktop, shows in Time Machine...but every backup attempt fails with "The backup volume could not be found. error: 18".
I'm confused because it's found the volume in it's source panel. Any help greatly appreciated.
The following are relevant notes from CONSOLE:
1/16/08 5:13:10 PM fseventsd[44] event logs in /Volumes/BACKUP 1/.fseventsd out of sync with volume. destroying old logs. (16998 0 17446)
1/16/08 5:13:10 PM fseventsd[44] log dir: /Volumes/BACKUP 1/.fseventsd getting new uuid: 09DD4896-F974-43F3-ACE4-3E622ED85B0D
1/16/08 5:13:10 PM /System/Library/CoreServices/backupd[5943] Backup requested due to disk attach
1/16/08 5:13:10 PM /System/Library/CoreServices/backupd[5943] Starting standard backup
1/16/08 5:13:11 PM /System/Library/CoreServices/backupd[5943] Volume at path /Volumes/BACKUP 1 does not appear to be the correct backup volume for this computer.
1/16/08 5:13:11 PM /System/Library/CoreServices/backupd[5943] Backup failed with error: 18
1/16/08 5:13:50 PM System Preferences[5772] Failed to create remote cookie file at path: /Volumes/BACKUP 1/.001b6399417e
1/16/08 5:15:53 PM /System/Library/CoreServices/backupd[6134] Backup requested by user
1/16/08 5:15:53 PM /System/Library/CoreServices/backupd[6134] Starting standard backup
1/16/08 5:15:53 PM /System/Library/CoreServices/backupd[6134] Volume at path /Volumes/BACKUP 1 does not appear to be the correct backup volume for this computer.
1/16/08 5:15:53 PM /System/Library/CoreServices/backupd[6134] Backup failed with error: 18

I tried the "INFO" button in Disk Utility and got the following (note permissions):
Name : BACKUP
Type : Volume
Disk Identifier : disk1s3
Mount Point : /Volumes/BACKUP 1
File System : Mac OS Extended (Journaled)
Connection Bus : FireWire
Device Tree : /PCI0/PCIB@1E/FRWR@3/node@d04b7a1902c345/sbp-2@c000/@0:3
Writable : Yes
Universal Unique Identifier : 88A2942E-7431-3CA4-9600-91B7B06C88BD
Capacity : 931.4 GB (1,000,081,408,000 Bytes)
Free Space : 720.2 GB (773,297,737,728 Bytes)
Used : 211.2 GB (226,783,670,272 Bytes)
Number of Files : 972,778
Number of Folders : 224,223
Owners Enabled : Yes
Can Turn Owners Off : Yes
Can Repair Permissions : No
Can Be Verified : Yes
Can Be Repaired : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
Disk Number : 1
Partition Number : 3
I will post in that forum. thank you!

Time machine has stopped working - 'the backup volume could not be found'

i'm not sure what happened, but my macbook pro hasn't been able to backup to my time machine for the past few weeks. i get a 'delayed' message, then in time machine prefs it says 'the backup volume could not be found.' i can manually mount the backup image, but it still won't backup. my wife's 12" powerbook is backing up perfectly. we both have 10.5.4. i was having the problem before the 7.3.2 firmware update, so that doesn't seem to be the cause. has this happened to anyone else? could my computer somehow lost track if the backup? is there prefs that can be trashed? i don't mind losing my old backups if i need to start over, but i can't figure out how to force it to backup because i keep getting the 'backup volume can't be found' no matter what i do.
my setup: dsl modem into time machine / my macbook pro, my wife's powermac 12", and our apple tv are the only clients.

There is a Time Machine preferences file at
<your startup drive root>/Library/Preferences/com.apple.TimeMachine.plist
Note: This is be main Library folder, not the one in your user folder.
You might try moving that to the Desktop so that the system creates a new one.

My time machine back up failed because it says the backup volume could not be mounted

My time machine back up failed because it says the backup volume could not be mounted. What does that mean and how do I fix it so that it backs up?

A whole lot about Time Machine for help with TM problems. Also you can select Mac Help from the Finder's Help menu and search for "time machine" to locate articles on how to use TM. See also Mac 101- Time Machine.
Use Disk Utility to repair the TM drive. If that doesn't help, and you don't find help from the above, then erase the drive and start a new TM backup.

A Volume Could Not Be Found

After Final Cut Express HD started crashing every time I tried to open it, I completely un-installed and then re-installed the program. It seems to open fine now, however two avi files I was using as source footage no longer open in FCE or Quicktime. In Quicktime I get an error message "The Movie Cannot Be Opened. A volume could not be found". I have tried opening the orinal avi file from the original disk in Quicktime, but still I get the same error message. Quicktime does however appear to open other avi files. Any ideas? Thanks

I installed codecs from http://perian.org

Disk Utility reports 'Volume could not be repaired' Now what?

Disk Utility reports that my internal HD cannot be repaired (I tried booting to the installation CD as-well-as a Superduper image with the same result). Here is the complete dialogue:
Verify and Repair disk “iMac_HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Illegal name
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
Repairing volume.
The volume iMac_HD could not be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
1 volume could not be repaired because of an error
Repair attempted on 1 volume
1 volume could not be repaired
Unfortunately the backup image has the same problem, so no use restoring the internal HD from it. So what do I do now? I read on a forum that the 'illegal name' error is caused by Photoshop CS, but didn't see a solution. Help!
 20" Intel iMac (2.0GB RAM, 256MB VRAM, 500GB HD) Mac OS X (10.4.6)

I get this error occassionally too. In those cases I take my original install dvd, put it in, reboot and hold the c key.
It then starts an install (don't worry, it won't do anything). When the install screen appears, in the top menu you can select Disk Utility.
Repair the disk from there, it will probably manage now. I guess something is interfering with Disk Utility when all of OS X has loaded.
Once the disk is repaired, verify/repair permissions, exit the program and reboot (don't hold and press c this time around).
Hope this helps.
Lars.
20" iMac Core Duo Mac OS X (10.4.5)

TS2830 Sync for IPod Touch quit working and I get error messages "a session could not be started" and "a connection could not be established" although the IPod appears in ITunes.

This is a new problem for an IPod Touch I have had for a year. The IPod is hooked up by cable and appears in ITunes. I can examine all the content on the IPOD and I can click "sync". It goes through to Step 7 and then the error messages occur. First "a session could not be started with the IPod" and when that dialogue box is closed, the message "a connection could not be established to the IPod."

Maybe:
Sync Session Failed to Start iTouch iOS5: Apple Support Communities
iphone could not be synced sync session failed to start...: Apple Support Communities

HT1766 I'm wanting to back up my iPhone to my PC but the following message keeps coming up - iTunes could not back up "Neil's iPhone " because a session could not be started with the iPhone. What does this mean and what do I do to resolve problem please.

What do I do about message:- iTunes could not back up iPhone because a session could not be started with the iPhone.

Read https://discussions.apple.com/thread/5010662?start=0&tstart=0

Volumes could not be started.

Similar Messages

Maybe you are looking for