Volumes OK, then press play and volumes wrong!!?

I have carefully crafted the volume and pan levels
for each instrument. I then press play, either from
the very beginning or from any point in the middle,
and the volume levels or effects or both are not
correct. To Fix the problem, I pick ANY tracks
headphone icon (monitor) button and click it once and
then back on, and the levels are perfect, just as I
wanted.
The GIGANTIC mystery is why why why.
What is going on here. I'm wondering if I have too
many effects, or there is an audio limitation. No
clipping is going on, and no messages are popping up.
All is smooth....it just seems my garageband doesn't
want me to have the volume settings and changes that
I have made.
Mysterious! Please help!!!!
It's funny you mention this because I just spent a long, long time making sure all my levels were perfect (although I mixed using Pro Tools) only to have my session's audio files accidentally erased. I could recreate the **** thing, but, dude, I'll just let it go 'cause it sounds pretty **** good as it is. I just hope stuff doesn't disappear when listen back through my monitors 'cause I mixed, initially, through headphones.

Similar Messages

Hi all.When pressed play and make some changes in loop (eg fade in fade out) are very slow to implement, and also the loops from the library are very slow to play, corrects the somewhat self so is the Logic??

hi all.When pressed play and make some changes in loop (eg fade in fade out) are very slow to implement, and also the loops from the library are very slow to play, corrects the somewhat self so is the Logic??

Hey there Logic Pro21,
It sounds like you are seeing some odd performance issues with Logic Pro X. I recommend these troubleshooting steps specifically from the following article to help troubleshoot what is happening:
Logic Pro X: Troubleshooting basics
http://support.apple.com/kb/HT5859
Verify that your computer meets the system requirements for Logic Pro X
See Logic Pro X Technical Specifications.
Test using the computer's built-in audio hardware
If you use external audio hardware, try setting Logic Pro X to use the built-in audio hardware on your computer. Choose Logic Pro X > Preferences > Audio from the main menu and click the Devices tab. Choose the built in audio hardware from the Input Device and Output Device pop-up menus. If the issue is resolved using built-in audio, refer to the manufacturer of your audio interface.
Start Logic with a different project template
Sometimes project files can become damaged, causing unexpected behavior in Logic. If you use a template, damage to the template can cause unexpected results with any project subsequently created from it. To create a completely fresh project choose File > New from Template and select Empty Project in the template selector window. Test to see if the issue is resolved in the new project.
Sometimes, issues with the data in a project can be repaired. Open an affected project and open the Project Information window with the Project Information key command. Click Reorganize Memory to attempt to repair the project. When you reorganize memory, the current project is checked for any signs of damage, structural problems, and unused blocks. If any unused blocks are found, you will be able to remove these, and repair the project. Project memory is also reorganized automatically after saving or opening a project.
Delete the user preferences
You can resolve many issues by restoring Logic Pro X back to its original settings. This will not impact your media files. To reset your Logic Pro X user preference settings to their original state, do the following:
In the Finder, choose Go to Folder from the Go menu.
Type ~/Library/Preferences in the "Go to the folder" field.
Press the Go button.
Remove the com.apple.logic10.plist file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro X User Manual for details on how to do this. If you are having trouble with a control surface in Logic Pro X, then you may also wish to delete the com.apple.logic.pro.cs file from the preferences folder.
If you have upgraded from an earlier version of Logic Pro, you should also remove~/Library/Preferences/Logic/com.apple.logic.pro.
Restart the computer.
Isolate an issue by using another user account
For more information see Isolating an issue by using another user account.
Reinstall Logic Pro X
Another approach you might consider is reinstalling Logic Pro X. To do this effectively, you need to remove the application, then reinstall Logic Pro X. You don't have to remove everything that was installed with Logic Pro X. Follow the steps below to completely reinstall a fresh copy of Logic Pro X.
In the Finder, choose Applications from the Go menu.
Locate the Logic Pro X application and drag it to the trash.
Open the Mac App Store
Click the Purchases button in the Mac App Store toolbar.
Sign in to the Mac App Store using the Apple ID you first used to purchase Logic Pro X.
Look for Logic Pro X in the list of purchased applications in the App Store. If you don't see Logic Pro X in the list, make sure it's not hidden. See Mac App Store: Hiding and unhiding purchases for more information.
Click Install to download and install Logic Pro X.
Thank you for using Apple Support Communities.
Cheers,
Sterling

How do I get iTunes 11 to work as the old iTunes did in this respect: after playing a song in one playlist, I click on another playlist, highlight a song, press play, and get the result of that song playing & that playlist continuing?

How do I get iTunes 11 to work as the old iTunes did in this respect: after playing a song in one playlist, I click on another playlist, highlight a song, press play, and get the result of that song playing & that playlist continuing? As it goes now, one clicks on the song in the new playlist where the arrow is and then chooses 'Play Song Next.' So, it plays next, but then the song after that is back in the old playlist. I want to use iTunes smoothly without the extra clicks I've had to do in order to get the playlist to continue. This is music for background while I play the violin at restaurants, and extra clicks and hassle is quite unappreciated, especailly since it worked fine in the previous iTunes.
Thanks.

At the top of the playlist where it shows the playlist title and the number of songs, there are two icons. Click the "play" triangle to add the entire playlist to "Up Next", or the "shuffle" symbol to do the same thing but in random order. But the currently playing track will stop playing, and all the songs in "Up Next" will be removed (replaced by the ones from this playlist).
If you hold down the "option" key while clicking those icons, the currently playing song will continue playing, and the new playlist will be added to "Up Next" (above the songs that were already there).

Strange pops when pressing play and stop. Logic 9.1.3, Mac internal Sound

Hi,
So I opened Logic for the first time in a while.
Logic Pro Version 9.1.3 (1697.87) 32bit.
Mac 2 x 2.8GHz Quad-Core Intel Xeon
Mac OS 10.6.5
6GB RAM
I am using the internal Mac sound card, set up as follows :
Core Audio
Built In Line Output
IO Buffer Size 512
I am running ONE Mono audio track, with one Space Designer plug-In (mono>Stereo) inserted on the first insert slot.
There is nothing else playing back on this particular logic song.
Every time I press the spacebar for play or stop, I get a tiny delay, a pop, and then is starts, or it stops playing.
This is using the Macs' own internal sound card. With Logic's own Space Deigner, on ONE mono audio track.
SO, any ideas as to why this happens?
The only reason I opened Logic, was because I wanted to show a producer friend of mine some personal Space Designer presets I had made a couple of years ago, in case that was the type of ambience he is interested in using for a mix.
My plan was to use Logic as an effects suite, using a Motu 828mk3 conected via ADAT Lightpipe to my Pro Tools HD converter, to send and recieve 4 stereo sends and returns with 4 instances of Space Designer.
But, if Logic hiccups with the internal sound card... what will happen when I use the Motu? I dread to think about it, but will test it tomorrow.
At least I have two weeks to get this working or re-do my convolution reverbs in another plug-in (Waves IR1) that I can use in Pro Tools, in case Logic just does not work out.

The multi-purpose internal audio chips used in Mac's & PC's has some built in latency and seemes to default to a basic 16-bit 48kHz format. Any change from this and the chip has to change on the fly, I knew sample rate did this, makes sense bit depth might as well.
Some internal chips have a built in noise gate which can also cause a "thump". (rare)
Cheap or out-of-spec audio chips with a high DC offset will cause a pop when pressing "Play" and "Stop", as will an audio file that has a high DC offset.
pancenter-

I was trying to restore my itouch and when i pressed "restore" and then pressed "restore and update", another sign popped up saying "The ipod "ipod" could not be restored. The disk you are attempting is full. Removing files and empty the recycle bin

i was trying to restore my itouch because it showed on my itouch the itunes bar on top and the charger on bottom so i went on itunes and when i pressed "restore" and then pressed "restore and update", another sign popped up saying "The ipod "ipod" could not be restored. The disk you are attempting is full. Removing files and empty the recycle bin will free up additional space. What do I do?!?!?! please help me ASAP

Hi
I followed this guy's instructions and it worked:
http://evsiphone.blogspot.com/2009/05/iphone-iphone-could-not-be-restored.html
I did disable the security (AVG and Zone Alarm) when I tried on my own PC. My wife's laptop which eventually got it working also uses AVG and Zone Alarm but on an XP O/S whereas my PC is Vista - maybe this is why.
Cheers for you help.
Andy
Message was edited by: bigbadandy

Press play and the songs don't play

I press play on my ipod and the song comes up but it doesn't start. I have tried different songs. I only had the ipod since Xmas.

I press play on my ipod and the song comes up but it
doesn't start. I have tried different songs. I only
had the ipod since Xmas.
same goes for me. I tried resetting the iPod and restoring it, but to no avail. I'll try other three things that I hadn`t noticed: reset my computer, try another USB port and then reinstall iPod + iTunes and reboot my computer.
try it. maybe that works for both of us. hope so.
PC Windows XP Service Pack 2

Simple UCCX script for IVR,Welcome message then press 1 and press 2

Dear Experts;
I have uccx 10.5.
I want to write a simple IVR script as below.
Step-1- Welcome message.with press 1 for Sales and Press 2 for Marketing
step-2 User Press 1 then transfer the call to Sales Skill Group.
Step-3 User press 2 then transfer the call to Marketing Skill group.
My doubt is how to accept when user press 1 and match the value and then transfer the call to that skill group.
Really appreciate any link or script for this.
Regards
Debashis

Dear Martyn;
Thanks a lot that was very nice and valuable information.
just want to ask which palette i have to use to save the value 1 or 2 when user press 1 or 2.
I know using Menu we can create different Menu option.
After user press 1 it will go SALES skill group and if press 2 Go MARKETING Skill group.
Appreciate if you can help me in this regard.
Regards
Debashis

I have a set of photoshop presets, I used to be able to press play and it would automatically run through all the steps now it asks me to ok every single step. What happened ?

I used to be able to press play on the preset and it would run through all the steps automatically. Now it stops at each step and wants me to adjust and ok everything ... I used the presets because I didn't have to do that. Why did it change ?

Where did you get the presets?

HT203167 Try downloading movies from iTunes and keeps telling me download error, retry. Then press retry and it won't download.

Try download movies from iTunes.
Processing
⬆️ press arrow
Keeps saying downloading error
Retry press that
And it just repeats.
Also, how can you delete movies from download? This is is second movie and trying to delete the first one.

Hello Omilee,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/ht1933
Best of luck,
Mario

My iPad will not play my songs I press play and nothing happens

My ipod3 has no sound and will not play my tunes

Try a Reset:
From the Home screen double tap the Home button to view the multitasking bar at the bottom. Tap and hold an app at the bottom till the icons wiggle with the minus button visible. Tap the button to close all apps then tap the Home button to get back to the Home page. Press and hold the Sleep button till you see the Slide to power off message and power it off. Once powered down completely press and hold the sleep button till the Apple icon appears.

Why do I get a popping sound when I press play and stop?

I hope this is an easy answer for someone. When I press the play or stop button I get a loud popping noise (same with space bar). I want to use AA to play sound clips over on air radio and this would ne an obvious problem. Any suggestions would be greatly appreciated.

It's almost certainly exactly that...I get the same effect when I do a quick playback via my laptop's internal card rather than hooking up my Firewire stuff. Going through and laboriously adjusting things on the Windows Sound control panel will stop it--but, alas, watching a video or listening to some kind of playback on the net can instantly reset the internal card to something different again.
Yet another reason to dislike Vista and W7.

Im trying to play a song preview it plays for like 5 sec then stops playing and know whats going on with this?

Does anyone know why this is happing?

Hello LindaHarp,
It sounds like you are listening to iTunes Radio and it stops shortly after you start listening. I recommend starting by signing out of your iTunes account in Settings > iTunes & App Stores. Then close all the running apps on the device:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that and restart the phone and test the issue by signing back in to your account, and testing again:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
Thank you for using Apple Support Communities.
All the best,
Sterling

My ipod powers off for no reason, I can press play and it restarts but a minute later it turns off

I'm listenting to my ipod nano and it shuts off automatically for no reason. I hit the play button and it starts again but shuts off 30 seconds later.
Anyone have this problem? Any thoughts on how to fix?

Push the headphones ALL the way in. The plastic on the headset jack must be flush with the Nano body.

I have DSL High-Speed with Earthlink, but it takes nearly 30 minutes for Firefox to bebin loading, including getting message "unresponsive script": I then press "continue" and wait three more minutes. This happens every time I turn on my PC (Windows XP Ho

see above
== This happened ==
Every time Firefox opened
== since downloading Firefox at an alternative to Internet Explorer

Hello Howard.
It's possible that you are having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not caused by one (or more than one) of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] (don't forget to select ''Disable all add-ons'' when you start safe mode). If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and themes and [https://support.mozilla.com/en-US/kb/Troubleshooting+plugins this one] for plugins.
If you need support for one of your add-ons, you'll have to contact its author.
If the problem is not disappears when all add-ons are disabled, please tell me, so we can work from there.

I press play, iphone looks to play, but music won't start and track remains on 0:00

Hi there
I recently upgraded to ios 5 and since then my music is behaving very strangely on my iphone.
Essentially I press play and the button changes to a pause sign (indicating it is playing), a play icon appears in the top next to the battery icon, but nothing happens - the track remains at 0:00.
Sometimes it does play a couple of song and then it hits this glitch and freezes on a song. I can forward to another song but it just freezes on that song.
Thanks in advance for any help.
Alex

I have a similar issue. The best way i've devised was to just shut off the phone completely and then turn it back on. It works for me...

Volumes OK, then press play and volumes wrong!!?

Similar Messages

Maybe you are looking for