[Voodoo 0.8] How to upgrade fresh Voodoo 0.8 to current version?

I bought VPS and asked for Archlinux to be installed. Unfortunately they have Archlinux Voodoo (0.8) installed. There's a 2.9.8 Pacman there and it doesn't want to upgrade itself.
# pacman -Syu
:: Synchronizing package databases...
:: current is up to date
:: extra is up to date
:: Replace mktemp with coreutils from "current"? [Y/n] Y
:: Replace slocate with mlocate from "current"? [Y/n] Y
:: Replace util-linux with util-linux-ng from "current"? [Y/n] Y
:: pacman has detected a newer version of the "pacman" package.
:: It is recommended that you allow pacman to upgrade itself
:: first, then you can re-run the operation with the newer version.
:: Upgrade pacman first? [Y/n] Y
error: unresolvable dependencies:
pacman: requires gcc-libs but it is not in the sync db
pacman: requires libarchive>=2.4.17 but it is not in the sync db
pacman: requires libdownload>=1.3 but it is not in the sync db

Just get the needed packages (gcc-libs,libarchive, libdownload) from some mirror.
For example ftp://ftp.hosteurope.de/mirror/ftp.arch … re/os/i686.
Install them with pacman -U pathtoyourfile
and Upgrade as before.

Similar Messages

  • I have an imac that is 3 years old, how do i upgrade my safari .. it is currently version 5.1.9

    i have an imac that is 3 years old, how do i upgrade my safari .. it is currently version 5.1.9

    1. You need to upgrade the computer's OS.
    2. Snow Leopard is 10.6 through 10.6.8. Lion is 10.7 through 10.7.5. Mountain Lion is 10.8 through 10.8.3 and future unreleased 10.8 updates.
    (81853)

  • How to upgrade my itouch to the newest iOS version. Model MB531LL version 4.2.1, How to upgrade my itouch to the newest iOS version. Model MB531LL version 4.2.1

    How to upgrade my itouch to the newest iOS version. Model MB531LL version 4.2.1,

    Identifying iPod models
    Check which ipod model you have.
    The 2nd gen can only go to 4.2.1

  • I just bought iphone 5 and my itunes says I need itunes 10.7 But when I look for upgrades it says I have the current version of itunes. HELP!

    I just bought iphone 5 and my itunes says I need itunes 10.7 But when I look for upgrades it says I have the current version of itunes. HELP!

    I am so sorry I am frustrating you. This is the first time I have used this community and am leanring as I go. I am not able to see the entire post that you leave, unless I look at it on my phone (email)--I am so sorry. You have no idea how much i appreciate your help. Yes, I see that I can get the later version of OS software, but its not availabe for immediate download. My only options appear to be having it shipped, or going to the store to purchase. And if you know of another way that I can access all of my itunes library music on my new phone withouth using itunes, I would love to hear about it.--thanks and again i am so sorry for frustrating you.

  • ACS SE 1113 Upgrade from 4.0.1 to current version

    Hello,
    does anyone has experience in upgrading the 1113 SE from 4.0.1 to the current version (4.2)? Our customer does not have a recovery CD. I did not found such an image on CCO. In case of any problems how can the system be recovered? Exact version of current version is 4.0.1(42). I suppose the following product will be the correct one for the upgrade: CSACSE4.2-SW-MR-K9.
    Any hints are apprecdated, thanks.
    Regards, Markus

    The first step in migrate the ACS software running on a previous SE appliance platform (the Cisco 1111, the Cisco 1112 or the Cisco 1113) to run on the ACS 4.2 Cisco 1113 platform is to Upgrade the software on a previous SE hardware platform (the Cisco 1111 or the Cisco 1112) to ACSversion 4.1 by using the full upgrade method.
    The further steps is described in the below URL:
    http://www.ciscosystems.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_solution_engine/4.2/installation/guide/solution_engine/upgap.pdf

  • Going to upgrade v. 3.6 to current version 15., do i need to delete 3.6 first or just upgrade over current 3.6??

    using HP laptop, Windows 7 home premium,
    Any good advice before i begin?
    George

    It may be best to uninstall the current version to make sure that the registry gets updated properly.<br />
    Otherwise it is possible that you still see the old entry in remove programs.
    Download a fresh Firefox copy and save the file to the desktop.
    *Firefox 15.0.x: http://www.mozilla.org/en-US/firefox/all.html
    Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
    *Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you will also lose your personal data like bookmarks and passwords from profiles of other Firefox versions.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    *It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    *http://kb.mozillazine.org/Uninstalling_Firefox
    Your bookmarks and other profile data are stored in the Firefox Profile Folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *http://kb.mozillazine.org/Profile_backup
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • How to upgrade from normal lightroom license to app version

    HI I purchased Lightroom just before the app was on the market. How can I upgrade to the app version?
    Thanks to anyone

    The only way to get Lightroom Mobile is with a subscription to Lightroom.
    Adobe Lightroom Mobile FAQ
    "Lightroom mobile is included as part of the following Creative Cloud membership plans:
    Creative Cloud Photography plan
    Photoshop Photography Program
    Creative Cloud complete plan
    Creative Cloud Student and Teacher Edition
    Creative Cloud for teams complete plan
    If you have access to Lightroom 5 via your Creative Cloud membership, then you have access to Lightroom mobile.
    Since Lightroom mobile is a service, it is available only via membership plans. Lightroom 5 perpetual license does not include access to Lightroom mobile."

  • How to upgrade i'Photo 4 to the latest version compatible with G5 iMac (Leopard 10.5.6)

    My fairly iMac G5 with Leopard 10.5.8 couldn't support i'Life 11 which needs a Intel chip.
    Could anybody help me to improve the technical features of i'Phot to the maximum possible ?
    The previous i'Life version is not available in the Store.
    Today using i'Photo 4.0.3
    Many thanks for any help.
    Benoit

    Unfortunately, I can't see that Apple make earlier versions of iLife available from the Support > Downloads section of their website. You will have to see if there are earlier versions of iLife available on eBay or Amazon. FWIW, iLife 2006 works fine on my G5, and possibly later versions too.

  • Do I need to upgrade to snow leopard if my current version is 10.6.8 to go to Lion?

    I'm currently on OS 10.6.8 on my mac book pro.  What do I need to do get Lion to install?

    Buy it thru the Mac App Store. It will download and install itself.
    Be aware that PowerPC apps will not work anymore.
    Minimum requirementss or Lion:
    An Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
    Mac OS X v10.6.6 or later to install via the Mac App Store (v10.6.8 recommended); you can install without Mac OS X v10.6 by using an OS X Lion USB Thumb Drive, available on the Apple Online Store
    7 GB of available disk space
    2 GB of RAM
    If your Mac does not meet these requirements, you will need to upgrade your Mac before installing Lion.

  • How do I update the operating software to current version. I have 1st generation ipad

    Hi - how do I update to current operating system. I have 1st generation iPad.
    Thanks

    What  version of iOS do you currently have on it : Settings > General > About > Version ? The first gen iPad only supports up to iOS 5.1.1, you can't install iOS 6 or 7 on it.
    If it's on iOS 5+ but not 5.1.1 then you should be able to update to 5.1.1 directly on it via Settings > General > Software Update. If it's on iOS 4 then you can only update via your computer's iTunes. But before you do an update take a backup.
    To update via a computer, connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Devices > Transfer Purchases. You may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad via File > Devices > Back Up.
    Then start the update by selecting the iPad on the left-hand sidebar, and on the Summary tab on the right-hand side clicking the Check For Updates button
    Updating to iOS 5+ : http://support.apple.com/kb/HT4972

  • HT4623 How do I update my Iphone to the current version of Itunes?

    I just got a new iPhone4 from Verizon. When I connected it to my laptop, I got an error message saying that I need to update iTunes on the iPhone. How do I do that? (I did update the O.S. on it)

    Itunes is NOT on the iphone.
    If it says that you need to update itunes, then you need to update itunes on your COMPUTER, not your iphone.

  • How to upgrade from solaris 8 to solaris 10

    Hi,
    Currently our server is installed with OS 8. I want to upgrade it to OS 10 as some application software is no more support OS 8. Can you advise on how to upgrade to OS 10 without affecting current server settings and configrations.
    Thanks
    vlsi

    >
    upgrade to OS 10 without affecting current server
    settings and configrations.Generally speaking, Solaris installs will offer you the opportunity to do an "upgrade" install that will preserve your existing config.
    Practically speaking, however, you need to have enough disk space to do the upgrade, and Solaris 10's full install is much larger than Solaris 8's.
    The install can also offer to do a data backup for you if it finds it has to resize your disk partitions, so you should be prepared with a tape drive (or available extra disk or NFS filesystem) for temporary storage of the backup.
    Even with all this, I would still recommend you make a backup of your system before starting.

  • How to upgrade my curve 9360?

    Hello,
    I'm new to the community and I was wondering how to upgrade my OS becuase I'm currently running on 319 firmware, my phone is constantly hot, battery life is extremely bad. I have downloaded desktop manager but no update is avalible, help please.
    Thank you.

    go into options - device, then select About Device Versions, the 3rd line down, what does it say?
    Craig Ashcroft Elite UK
    If this post helps you please click the LIKE below the post(s)

  • How to upgrade Robohelp X5 to Robohelp 7 (or some later version)?

    (Searched the forum but didn't find an answer. I apologize if it has been covered already.)
    We've been using Robohelp X5 and are now considering an upgrade due to the incompatibility with current versions of MS Word. On Adobe's product page there seem only options to upgrade from Robohelp 7 or Robohelp 8 to Robohelp 9. Does that mean that there's currently no way to upgrade from Robohelp X5 to any later version? Thanks!

    Your projects will upgrade but there is no reduced price unless upgrading from 7 or 8.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • How to update base java and use same jbuilder version

    hi,
    I use jbuilder 3.5, I need to use java1.4 but i dont know how to upgrade java while using the same jbuilder version.
    I tried changing the [prooject default properties such that the path pin[points to jdk1.4 it recognized this move and it automatically changed all the references upon specifying the home directory of jdk1.4. However, when i rename the jdk1.2.2 folder and then try to reload jbuilder it say vm error could not start vm.
    I need to remove 1.2.2 from my system and i want jbuilder to use 1.4 any ideas how this can be done.
    Thanks
    Derik
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

    I remember JBuilder 3.x had quite a few little bugs and memory leaks. But I do know it does let you change the jdk, unlike the later versions (which force you to pay for the non-'personal' versions to get this and many other features)
    Toi be honest, if it's giving you grief, I swop to eclipse, which doesn't even come with a java environment, so it's completely separate. And a far nicer tool as well. And it's free, open source, blah blah <more buzz-words go here>.

Maybe you are looking for