Voodoo3 3000 driver for Solaris 8 IA

Hi,
I am looking for a 3dfx-Voodoo3 3000 AGP 16MB driver for solaris 8.
Target computer : AMD K7 Tunderbird CPU whit ASUS A7V133 M.B.
Thanks in advance
Regards
Flavio Azra

Hi Shaun,
I had email contact with sun technicians and they told me that they keep on improving graphics support but that there's no Nvidia driver available by now. No one could tell me when they would start to support GeForce chips but they said it's a good idea to use XFree86 instead which comes with in integrated nvidia driver. Version 4.0.3 worked almost right out of the box, version 4.1.0 caused problems so I reinstalled 4.0.3 again.
Hope this helps!
Regards from Germany
Dirk

Similar Messages

3dfx driver for solaris 8

Hi,
I am looking for a 3dfx banshee driver for solaris 8. Any pointers. If none exists any pointers to how I could port the 3dfx drivers for linux and glide over to solaris 8. Can I use gcc to do my work?
Thanks in advance
Regards
Nirmal

Hello Flavio,
please i need a driver for Voodoo3 3000 AGP video
adapter, you have one ?No. I wrote a driver for the V2 and it's not very useful - I made it for Solaris Sparc and all you can do is a few IOCTLs and mmap the device memory into userland. The driver does work on i386 but you need the latest MMU patch. I did not have the time yet to port glide - I have something half working for sparc but I have not spend time to make it work on i386. Even with glide working you can't use X11 (one would have to write the X11 drivers and that's a whole new ball game).
How i do to install this driver ? sorry i�m begining
on Sun.If you wish to use it for X11, I would recommend to download the XFree86 binaries for Solaris, since it has support for the V3.
You can get more information about it on www.xfree86.org.
My S.O. is Sun Solaris 8 01-01 (IA) on ASUS A7V133 and
AMD K7 cpu.
Thanks to you, very much.You are welcome!
(desculpe aih o ingles chiclete camarada preciso treinar++)(O ingles esta' bom!).

SIS 6326 driver for Solaris Intel platform

Apparently those who used a SiS 6326 chip on the graphics card
cannot find a proper driver for Solaris 8 Intel.
I am having the same problem, is there any way of resolve this problem
so I can make my graphics card work at 100% or does this mean I have to get a different graphics card which is supported by Solaris 8 Intel.

Do you know if there is any other old SiS drivers for Sun? Maybe we can make it work good (at least 50% fine) using an old driver...
PS: If you can, please answer to my email: [email protected]
Thanks in advance...

SQLServer ODBC driver for solaris

Hi,
do anyone know where I can find the SQLServer ODBC driver for solaris in order to use Oracle Heterogeneus
Service?

Easysoft has two ways to do this:
An ODBC-JDBC gateway driver that runs any JDBC accessible database including SQL Server under one license. Apparently, the ODBC C library has a JAVA engine in there to read the vendor JAR files. I tried it on Interbase with windows, and it worked fine.
They also have an ODBC-ODBC bridge, but that implies a Windows Server to provide the real SQL Server ODBC for free with another network hop.

Pcn driver for solaris 8

Hello!
I have ultra10 with solaris 8 . i want to add another network card ( AMD PCnet ethernet controller) to the
system. The card is being recognised by the system but unable get its driver ...
what should i do???
pl. help me
thanks in advance...
omirah

Hello Flavio,
please i need a driver for Voodoo3 3000 AGP video
adapter, you have one ?No. I wrote a driver for the V2 and it's not very useful - I made it for Solaris Sparc and all you can do is a few IOCTLs and mmap the device memory into userland. The driver does work on i386 but you need the latest MMU patch. I did not have the time yet to port glide - I have something half working for sparc but I have not spend time to make it work on i386. Even with glide working you can't use X11 (one would have to write the X11 drivers and that's a whole new ball game).
How i do to install this driver ? sorry i�m begining
on Sun.If you wish to use it for X11, I would recommend to download the XFree86 binaries for Solaris, since it has support for the V3.
You can get more information about it on www.xfree86.org.
My S.O. is Sun Solaris 8 01-01 (IA) on ASUS A7V133 and
AMD K7 cpu.
Thanks to you, very much.You are welcome!
(desculpe aih o ingles chiclete camarada preciso treinar++)(O ingles esta' bom!).

How to get the free space from logical drive for solaris installation?

Hi.. I am using win-xp.In the extended drive I have freed 10gb by deleting one of the logical drives.I wish to know how to proceed for solaris installation in the space available with out disturbing the data in other logical drives.Is there any tool?

Hi,
See: http://www.sun.com/software/solaris/self_help.jsp
At the bottom of that page, FAQ # 3
HTH,
John

ISCSI Driver for Solaris 8

Hello,
Can someone tell me if there is iSCSI driver available for Solaris?
Cisco side does have download link any more for Solaris.
Thanks,
Vigyan

Solaris does not yet have a production iscsi driver. You can get it in the beta solaris 10 download but it is not production ready yet. You will have to look around on the net for the cisco one our some other third party driver for the time being.

RealTek Wireless driver for Solaris 11.2 x86

I have a Lenovo Z50-70 notebook.
Solaris can detect the ether net card but can not detect the wireless both are RealTek
scanpci is as follows
root@dhcppc4:~# scanpci
pci bus 0x0000 cardnum 0x00 function 0x00: vendor 0x8086 device 0x0a04
Intel Corporation Device unknown
pci bus 0x0000 cardnum 0x02 function 0x00: vendor 0x8086 device 0x0a16
Intel Corporation Device unknown
pci bus 0x0000 cardnum 0x03 function 0x00: vendor 0x8086 device 0x0a0c
Intel Corporation Device unknown
pci bus 0x0000 cardnum 0x14 function 0x00: vendor 0x8086 device 0x9c31
Intel Corporation Device unknown
pci bus 0x0000 cardnum 0x16 function 0x00: vendor 0x8086 device 0x9c3a
Intel Corporation Device unknown
pci bus 0x0000 cardnum 0x1b function 0x00: vendor 0x8086 device 0x9c20
Intel Corporation Device unknown
pci bus 0x0000 cardnum 0x1c function 0x00: vendor 0x8086 device 0x9c14
Intel Corporation Device unknown
pci bus 0x0001 cardnum 0x00 function 0x00: vendor 0x10ec device 0x8168
Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller
pci bus 0x0000 cardnum 0x1c function 0x03: vendor 0x8086 device 0x9c16
Intel Corporation Device unknown
pci bus 0x0002 cardnum 0x00 function 0x00: vendor 0x10ec device 0xb723
Realtek Semiconductor Co., Ltd. Device unknown
pci bus 0x0000 cardnum 0x1c function 0x04: vendor 0x8086 device 0x9c18
Intel Corporation Device unknown
pci bus 0x0003 cardnum 0x00 function 0x00: vendor 0x10de device 0x1341
NVIDIA Corporation Device unknown
pci bus 0x0000 cardnum 0x1d function 0x00: vendor 0x8086 device 0x9c26
Intel Corporation Device unknown
pci bus 0x0000 cardnum 0x1f function 0x00: vendor 0x8086 device 0x9c43
Intel Corporation Device unknown
pci bus 0x0000 cardnum 0x1f function 0x02: vendor 0x8086 device 0x9c03
Intel Corporation Device unknown
pci bus 0x0000 cardnum 0x1f function 0x03: vendor 0x8086 device 0x9c22
Intel Corporation Device unknown
Also Device Driver Utility report is attached
Regards
Amin

Sorry, we don't have currently a driver for the Realtek RTL8723BE component.

SUN QuadFastEthernet Driver for Solaris 8

Does anyone knows if I install the drivers for Solaris 2.5 on my Solaris 8 if I have any chance that it will work?

I am having the similar problem identified in this thread.
OS: Sun Solaris 10 01/06
Hardware: Sun Blade 2500
PCI Memory card.
Problem: When driver moves more then 40 bytes via PIO from a PCI device memory card, the long words are swapped starting at 40 byte transfer size and greater.
device memory description:
static ddi_device_acc_attr_t sdram_access_attr =
DDI_DEVICE_ATTR_V0, /* Boilerplate value */
DDI_STRUCTURE_LE_ACC,
DDI_STRICTORDER_ACC /* Don't reorder accesses */
The user application does a read call, which goes to xxread. xxread calls physio( xxstrategy, bp, dev, B_READ, xxminphys, uio );
In xxstrategy the transfer is done using
ddi_mem_rep_get8(ucb->ucb_sdram_accHndl,
(uint8_t*) kaddr,
(uint8_t*) raddr,
(size_t) bp->b_resid),
(uint_t) DDI_DEV_AUTOINCR );
PCI Device memory is loaded with incrementing address (8bit), 0,1,2... This is confirmed using a PCI Bus Analyzer.
A read of 36 bytes or less returns:
03 02 01 00 07 06 05 04 ...
A read of 40 bytes returns:
07 06 05 04 03 02 01 00 ...
If I peek 1 byte at a time using ddi_get8(ucb->ucb_sdram_accHndl, ...) I get
00 01 02 03 04 05 06 07
Why are the long words swapped starting at 40 byte transfer size and greater?

Quad gigaSwift Ethernet Driver for Solaris 10 Sparc

I have been looking about for this all over the place and cannot find it anywhere, in the manual and the sun site all the downloads are for solaris 9.
Are these cards not supported on Solaris 10 Sparc ?
Cheers,
Mike

it is the X4444A solaris 10 did pick up the card straight away, but the problem is there was no ce.conf file, i have created my own because i need to turn on jumbo frame for an individual port, but when i add it in all the ports on the card are being set to MTU 9800 so then i have to set them indivually to 1500 apart from the one i am using that needs to be 9000. This is all good and proper but when i activate this the box connects to the netapps server but all nfs shares fail as soon as anything touches these directories.
The netapps filer is running at MTU 9000 and the card is running at 9000 causes everything to fall over, set back to normal and everything is ok.
Any ideas ?

ODBC Driver for Solaris

I'm in need of an ODBC Driver for Oracle 8.1.6. We can't use Merant and Openlink doesn't support 8.1.6 yet. Any suggestions?

I would appreciate it if you would direct me to some information on the fact that 8i does not support the OpenLink ODBC driver.
Thanks

Problem with a DDI Device driver for Solaris 8 and 9 on a Sun-Blade-1500

The problem has to do with dma allocated memory and the little-endian format.
When I copy blocks bigger than 256 bytes to the dma memory, using a uiomove() or bcopy(), the data after the first 32 bytes is swapped around over 8 bytes.
The bcopy from a driver (stack) buffer into the dma virtual memory has the same affect.
So it has to do with the kernel dma allocated memory and the endianess.
When I set the byte order to big-endian inside the ddi_device_acc_attr the data seems to be alright, also with bigger transfer sizes.
My device however needs the little-endian format.
I have the same the same device driver running without any errors on a Sun Blade-150 Solaris 8 for a long time now.
Can somebody please advise me?
Data example,
test data: 0x00,0x01,0x02,?.
64, 128 or 256 bytes blocks:
000: 07 06 05 04 03 02 01 00 0F 0E 0D 0C 0B 0A 09 08
016: 17 16 15 14 13 12 11 10 1F 1E 1D 1C 1B 1A 19 18
032: 27 26 25 24 23 22 21 20 2F 2E 2D 2C 2B 2A 29 28
048: 37 36 35 34 33 32 31 30 3F 3E 3D 3C 3B 3A 39 38
064: 47 46 45 44 43 42 41 40 4F 4E 4D 4C 4B 4A 49 48
080: 57 56 55 54 53 52 51 50 5F 5E 5D 5C 5B 5A 59 58
096: 67 66 65 64 63 62 61 60 6F 6E 6D 6C 6B 6A 69 68
112: 77 76 75 74 73 72 71 70 7F 7E 7D 7C 7B 7A 79 78
512 or 1024 bytes blocks:
000: 07 06 05 04 03 02 01 00 0F 0E 0D 0C 0B 0A 09 08
016: 17 16 15 14 13 12 11 10 1F 1E 1D 1C 1B 1A 19 18
032: 20 21 22 23 24 25 26 27 28 29 2A 2B 2C 2D 2E 2F <----- ?
048: 30 31 32 33 34 35 36 37 38 39 3A 3B 3C 3D 3E 3F <----- ?
064: 40 41 42 43 44 45 46 47 48 49 4A 4B 4C 4D 4E 4F <----- ?
080: 50 51 52 53 54 55 56 57 58 59 5A 5B 5C 5D 5E 5F <----- ?
096: 60 61 62 63 64 65 66 67 68 69 6A 6B 6C 6D 6E 6F <----- ?
112: 70 71 72 73 74 75 76 77 78 79 7A 7B 7C 7D 7E 7F <----- ?
Code example, how I allocate the DMA (kernel) memory:
DDI_STRUCTURE_LE_ACC = Little Endian format
DDI_STRUCTURE_BE_ACC = Big Endian format
static struct ddi_device_acc_attr sse_dma_attr =
DDI_DEVICE_ATTR_V0, /* The version number of this structure */
DDI_STRUCTURE_LE_ACC, /* see above */
DDI_STRICTORDER_ACC, /* How CPU will reference data, default */
The dma definitions for allocating the DMA memory
static ddi_dma_attr_t dmaattr= {
DMA_ATTR_V0, /* version */
0, /* starting address for DVMA */
0xffffffff, /* end address for DVMA */
0xffffffff, /* max transfer count in one cookie */
0x1, /* address restrictive alignment, 1 = byte alignment */
0x7, /* burst sizes */
1, /* min number of byes */
0x00ffffff, /* max number of bytes device can transmit/receive */
0xffffffff, /* upper bound of the DMA engine's address */
1,
512,
0, /* DDI_DMA_FORCE_PHYSICAL doesn't work */
ddi_dma_alloc_handle()
if((ret=ddi_dma_alloc_handle(xsp->dip,
&dmaattr,
DDI_DMA_SLEEP,
NULL,
dmahandle_out)) != DDI_SUCCESS)
cmn_err(CE_CONT, "ucr_dma_alloc_memory, "
"ERROR ddi_dma_alloc_handle status = %d\n",
ret);
return(ret);
if((ret=ddi_dma_mem_alloc(*dmahandle_out,
(uint_t) size,
dma_acc_attr,
DDI_DMA_CONSISTENT,
DDI_DMA_SLEEP,
NULL,
(caddr_t *)&raw_kern_addr,
&real_len,
dma_acc_handle_out)) != DDI_SUCCESS)
cmn_err(CE_CONT, "ucr_ucr_dma_alloc_memory, "
"ERROR ddi_dma_mem_alloc status = %d\n",
ret);
ddi_dma_free_handle(dmahandle_out);
return(ret);
This will also init the PCI - IOMMU for
address translation.
if((ret=ddi_dma_addr_bind_handle(*dmahandle_out,
NULL,
(caddr_t)raw_kern_addr,
real_len,
DDI_DMA_RDWR | DDI_DMA_CONSISTENT,
DDI_DMA_SLEEP,
NULL,
&dma_cookie,
&count)) != DDI_SUCCESS)
cmn_err(CE_CONT, "ucr_ucr_dma_alloc_memory, "
"ERROR ddi_dma_addr_bind_handle status = %d\n",
ret);
ddi_dma_mem_free(dma_acc_handle_out);
ddi_dma_free_handle(dmahandle_out);
return(ret);
if((ret=ddi_dma_sync(*dmahandle_out,
0,
real_len,
DDI_DMA_SYNC_FORDEV)) != DDI_SUCCESS)
cmn_err(CE_CONT, "ucr_ucr_dma_alloc_memory, "
"ERROR ddi_dma_sync status = %d\n", ret);
ddi_dma_unbind_handle(*dmahandle_out);
ddi_dma_mem_free(dma_acc_handle_out);
ddi_dma_free_handle(dmahandle_out);
return(ret);

I am having the similar problem identified in this thread.
OS: Sun Solaris 10 01/06
Hardware: Sun Blade 2500
PCI Memory card.
Problem: When driver moves more then 40 bytes via PIO from a PCI device memory card, the long words are swapped starting at 40 byte transfer size and greater.
device memory description:
static ddi_device_acc_attr_t sdram_access_attr =
DDI_DEVICE_ATTR_V0, /* Boilerplate value */
DDI_STRUCTURE_LE_ACC,
DDI_STRICTORDER_ACC /* Don't reorder accesses */
The user application does a read call, which goes to xxread. xxread calls physio( xxstrategy, bp, dev, B_READ, xxminphys, uio );
In xxstrategy the transfer is done using
ddi_mem_rep_get8(ucb->ucb_sdram_accHndl,
(uint8_t*) kaddr,
(uint8_t*) raddr,
(size_t) bp->b_resid),
(uint_t) DDI_DEV_AUTOINCR );
PCI Device memory is loaded with incrementing address (8bit), 0,1,2... This is confirmed using a PCI Bus Analyzer.
A read of 36 bytes or less returns:
03 02 01 00 07 06 05 04 ...
A read of 40 bytes returns:
07 06 05 04 03 02 01 00 ...
If I peek 1 byte at a time using ddi_get8(ucb->ucb_sdram_accHndl, ...) I get
00 01 02 03 04 05 06 07
Why are the long words swapped starting at 40 byte transfer size and greater?

AMD Radeon 6770m and Intel HD 3000 Driver for Windows 8.1 Pro 64 Bit

Hi, I use
Laptop : HP Pavilion DV 6 - 6019 TX.
OS : Windows 8.1 Pro 64 Bit.
VGA : - AMD Radeon 6770m
- Intel HD 3000
Now, the graphic was error, each after booting, the windows logo appears then to black screen (can't get the desktop).
In device manager - display adapters, only AMD problem (Microsoft Basic Display Adapter), then I uninstall the driver to be able to install AMD drivers.
I tried with "14-4-mobility-win7-Win8-win8.1-64-dd-ccc-WHQL", it is said that the last AMD drivers, but when at the end of install, it said failed to complete.
i also update driver Intel HD 3000 from this " https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23764 "
File name: win64_152822.exe
Version: 15.28.22.64.3517 (Latest)
Date: 04/10/2014
Size: 138.68 MB
OS: Windows 7 (64-bit), Win 8 (64-bit), Win 8.1 (64-bit)
anyone please help me? i already try 5 days to try some driver but still black screen because AMD driver can't install. if you know the driver, please write the link. thanks a lot

1. In bios, do you found fixed and dynamic? if you don't found, install bios mod. Use dynamic
2. Uninstall all programs and drivers previously, before of "Advanced Micro Devices, Inc. - Graphic Adapter WDDM1.3 - AMD Radeon HD 6700M Series" Release July 2014. You can use http://www.wagnardmobile.com/DDU, for example.
3. Do you install windows 8.1 on windows 8.0? do you use windows 8.1 fresh installation? Can you testing install a new copy of windows 8.0 fresh? install drivers and later install updates... or fresh install windows 8.1?
4. You testing install Windows 7 with http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55092.exe and update to windows 8?
5. You testing install http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55092.exe in windows 8 initially?
NOTE: Excuse me my bad english, I try to help you. You should install drivers in order: Intel Chipset Device Software, Intel Rapid Storage Technology, Intel Management Engine Interface (6-series / 7-series / 8-series / 9-series) and then AMD software: http://forum.notebookreview.com/hp-drivers-software-forum/556469-drivers-hp-dv6-4xxx-dv6-6xxx-dv7-5x...
NOTE 2: My computer support Windows 8.1 native, but your computer not... http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=5077... will be no new official drivers for these devices
NOTE 3. Test leshcat or guru3d drivers, and review forum respectively

2.2 GPIB driver for Solaris doesn't work with Sol. 2.3 tester

Upgraded to 2.2 GPIB driver to fix issue of driver being lost on Sun Ultra60's at shutdown and reboot. The driver works fine with 10 of the 11 tester platforms we use. This tester is a Genesis III running Solaris 2.3. The program will run successfully, but when shutdown and re-started, the drivers are not there and must be re-installed. What to do? Thanks.

Thanks for the suggestion to check privileges, but that's the problem--the driver is not present to have any privileges to check. On reboot, there are only links (all owned by root with 777 perm.) at /dev which lead to non-existent directories.
#/dev> ls -l gpib*
lrwxrwxrwx 1 root other 43 Apr 18 09:50 gpib -> ../devices/pci@1f,4000/NATI,pci-gpib@2:gpib
lrwxrwxrwx 1 root other 44 Apr 18 09:50 gpib0 -> ../devices/pci@1f,4000/NATI,pci-gpib@2:gpib0
lrwxrwxrwx 1 root other 44 Apr 18 09:50 gpib1 -> ../devices/pci@1f,4000/NATI,pci-gpib@4:gpib1
If you try to use these links to go to these dirs, there're not there. Also, ibconf shows no gpib devices loaded.
Any more suggestions would be greatly appreciated.

Canon LBP 660 driver for solaris 9

Hello there,
I just install solaris 9 in an x86 machine but my laser printer canon LBP 660 is no more recognised. My printer uses parallele port. Someone can help me to solve this problem, so I could print please?
Amani

This is a nasty "WinPrinter" other than using a current version of Solaris/OpenSolaris witch you may have better luck getting it going (why are you using an ancient V9 Solaris ) check out this site ...
http://www.linuxprinting.org/show_driver.cgi?driver=lbp660&fromprinter=Canon-LBP-660

Voodoo3 3000 driver for Solaris 8 IA

Similar Messages

Maybe you are looking for