Vostro 200 running Win 7 Pro 64 bit
Computer won't recognize my onboard sound card and only says Microsoft HD Audio. Headset mic won't record. Any help appreciated. Thanks
See here:
http://dellwindowsreinstallationguide.com/driver-sets/vostro-desktops/vostro-200-windows-7-64-bit/
Similar Messages
-
I have no Audio in Firefox. I think this is an old problem with Dell IDT driver and Firefox. Flash is installed, I have uninstalled and re-installed two or three times, removed pluggins and put them back to no avail. The native win 7 driver from 2010 works okay in all browsers including firefox but I would like an up-to-date driver that works. The latest IDT driver for my Dell e6500 running Win 7 pro works great in IE and Chrome but not Firefox.
I don't think there was any setting I could change on the driver. Firefox did not show up in the mixer or volume control. It is there with the native win 7 driver. This driver doesn't seem to see Firefox. I just got this computer, but looking for help, posts three years ago on the web seemed to have this problem with the Dell e6500 and Firefox.
-
Itunes won't run, Win 7 Pro 64 Bit
Itunes 11.0.1 will not run. For that matter 10.X won't run either. I am running Windows 7 Pro 64 Bit. Multiple uninstall's and reinstalls, still no joy. I am extremely displeased (I own 5 Apple products crippled by this).
Do you get an error message when you try to launch iTunes? If so, what does it say? (Precise text, please.)
-
I received this after performing a complete un-install, ran a utility to clean the registry, re-booted, then downloaded and re-installed the latest version of iTunes (10.0.7.21) This was the same error message I received before performing the steps above. Any advice or suggestion would be greatly appreciated.
Thanks-You will probably get more help on iTunes for Windows forum:
https://discussions.apple.com/community/itunes/itunes_for_windows -
I have a laptop running Win 7 Pro, can I setup a dualboot with Win XP
My laptop is running Win 7 Pro (32-bit) but I have a Iomega Zip 100 drive which has not been supported since Win XP. I have numerous discs with content I would like to access and put onto CD. Can I set up a dualboot system with Win 7 and Win XP without
affecting my current data?The first thing you need to do is verify that there are Windows XP chipset and device drivers for your laptop. If there are none then XP may not function properly, no mouse, keyboard, video, USB ports may no work and more.
If there are drivers then read the following:
Dual Boot Installation with Windows 7 and XP
(Read each option / method in this article and see which matches your needs)
http://www.sevenforums.com/tutorials/8057-dual-boot-installation-windows-7-xp.html
How to Stop System Restore Points from being Deleted in Vista and Windows 7 when Dual Booting with XP
http://www.vistax64.com/tutorials/127417-system-restore-points-stop-xp-dual-boot-delete.html
As always, with a major undertaking such as this create an image backup of your entire hard drive (to an external USB drive) first.
=================== Image Backup Software ===================
EaseUS Todo Backup Home V8.0
http://www.todo-backup.com/home/home-backup.htm
Free version:
http://www.todo-backup.com/products/home/free-backup-software.htm
Version comparison chart:
http://www.todo-backup.com/products/home/comparison.htm
Includes: Incremental backup, Disk/partition clone
User's Guide:
http://www.todo-backup.com/download/docs/User_Guide.pdf
(Note: Install Todo and then create an "Emergency Disk" before you start creating your first image backup)
Version 8.0 supports XP, Vista, Windows 7, 8 and 8.1
Acronis True Image 2015
has a 30 day trial version available, trial Key sent to your Email Address.
Note: Cloning and drive initialization (creating a MBR) are not supported in the trial version.
For the trial version, recovery is available only when booting from an Acronis Bootable Media CD.
Install Acronis and then create a bootable Restore/Rescue Media CD before you start creating your first image backup
http://www.acronis.com/en-us/personal/true-image-comparison/
30 day trial :
http://www.acronis.com/en-us/personal/pc-backup/
True Image User Guides and documentation:
http://www.acronis.com/en-us/support/documentation/
2015 supports XP, Vista, Windows 7, Windows 8 and 8.1
Paragon: Free version:
http://www.paragon-software.com/home/br-free/
User'sGuide:
http://www.paragon-software.com/home/br-free/download.html
Home Version $39.95:
http://www.paragon-software.com/home/brh/
Support:
http://www.paragon-software.com/support/
Macrium Reflect Free: Free version:
http://www.macrium.com/reflectfree.aspx
(no technical support available for the free version)
Macrum Reflect Standard ($49.99)
http://www.macrium.com/personal.aspx
Suport:
http://www.macrium.com/ticket.aspx
J W Stuart: http://www.pagestart.com
Never be afraid to ask. This forum has some of the best people in the world available to help. -
I have a new PC running Win 7 Pro 64 bit. I want to xfer all of my iTune libraries from previous PC also running
Win 7 Pro 64 bit to my new PC. Thus far have been successful in doing so. Any suggestions on how I should
accomplish this?Yes.
tomfromlong beech wrote:
"Remember one one level of subfolders is allowed." Does this mean that you can have as many subfolders as you want, but they can only be one level deep under the main folder? -
I ran WIN 7 Pro 32-bit and my K9N Diamond showed 3GB of RAM.
Now I'm running WIN 7 Pro 64-bit and it still shows 3GB of RAM. I thought with 64-bit installed I'd see all 4GB of RAM?And now in addition.... now I'm even MORE certain that I'm correct....DIMM4 is bad....
The CPU-z Tools Save Report names the DIMMs by name....1, 2, and 3...... #4 isn't listed..... lookee here:
Memory SPD
DIMM # 1
SMBus address 0x50
Memory type DDR2
Module format Regular UDIMM
Manufacturer (ID) Crucial Technology (7F7F7F7F7F9B0000)
Size 1024 MBytes
Max bandwidth PC2-6400 (400 MHz)
Part number
Serial number FFFFFFFF
Manufacturing date Week 08/Year 32
Number of banks 1
Data width 64 bits
Correction None
Nominal Voltage 1.80 Volts
EPP no
XMP no
JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency
JEDEC #1 4.0-4-4-11-15 @ 266 MHz
JEDEC #2 5.0-5-5-14-19 @ 333 MHz
JEDEC #3 6.0-6-6-16-22 @ 400 MHz
SPD registers
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
00 80 08 08 0E 0A 60 40 00 05 25 40 00 82 08 00 00
10 0C 08 70 01 02 00 03 30 45 3D 50 3C 1E 3C 28 01
20 17 25 05 12 3C 1E 1E 00 06 37 7F 80 14 1E 00 00
30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 13 D3
40 7F 7F 7F 7F 7F 9B 00 00 FF 00 00 00 00 00 00 00
50 00 00 00 00 00 00 00 00 00 00 00 00 04 32 08 FF
60 FF FF FF 00 00 00 00 00 00 00 00 00 00 00 00 00
70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
90 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
DIMM # 2
SMBus address 0x51
Memory type DDR2
Module format Regular UDIMM
Manufacturer (ID) Crucial Technology (7F7F7F7F7F9B0000)
Size 1024 MBytes
Max bandwidth PC2-6400 (400 MHz)
Part number
Serial number FFFFFFFF
Manufacturing date Week 08/Year 32
Number of banks 1
Data width 64 bits
Correction None
Nominal Voltage 1.80 Volts
EPP no
XMP no
JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency
JEDEC #1 4.0-4-4-11-15 @ 266 MHz
JEDEC #2 5.0-5-5-14-19 @ 333 MHz
JEDEC #3 6.0-6-6-16-22 @ 400 MHz
SPD registers
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
00 80 08 08 0E 0A 60 40 00 05 25 40 00 82 08 00 00
10 0C 08 70 01 02 00 03 30 45 3D 50 3C 1E 3C 28 01
20 17 25 05 12 3C 1E 1E 00 06 37 7F 80 14 1E 00 00
30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 13 D3
40 7F 7F 7F 7F 7F 9B 00 00 FF 00 00 00 00 00 00 00
50 00 00 00 00 00 00 00 00 00 00 00 00 04 32 08 FF
60 FF FF FF 00 00 00 00 00 00 00 00 00 00 00 00 00
70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
90 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
DIMM # 3
SMBus address 0x53
Memory type DDR2
Module format Regular UDIMM
Manufacturer (ID) Crucial Technology (7F7F7F7F7F9B0000)
Size 1024 MBytes
Max bandwidth PC2-6400 (400 MHz)
Part number
Serial number FFFFFFFF
Manufacturing date Week 08/Year 32
Number of banks 1
Data width 64 bits
Correction None
Nominal Voltage 1.80 Volts
EPP no
XMP no
JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency
JEDEC #1 4.0-4-4-11-15 @ 266 MHz
JEDEC #2 5.0-5-5-14-19 @ 333 MHz
JEDEC #3 6.0-6-6-16-22 @ 400 MHz
SPD registers
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
00 80 08 08 0E 0A 60 40 00 05 25 40 00 82 08 00 00
10 0C 08 70 01 02 00 03 30 45 3D 50 3C 1E 3C 28 01
20 17 25 05 12 3C 1E 1E 00 06 37 7F 80 14 1E 00 00
30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 13 D3
40 7F 7F 7F 7F 7F 9B 00 00 FF 00 00 00 00 00 00 00
50 00 00 00 00 00 00 00 00 00 00 00 00 04 32 08 FF
60 FF FF FF 00 00 00 00 00 00 00 00 00 00 00 00 00
70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
90 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF -
Adobe reader XI 11.0.05,running in Win 7 Pro 64-bit
I have the black X upper left corner. When access a web sit , for example WWW.SSA.GOV and click in forms , then open a pdf link , a blank screen shows with a black x only. I tried many options to fix this problem but not success. If I try to open the same document in google chrome it opens perfect. So my problem is with IE, so Ireset the IE and no fix. I downgrade to IE10 , no fix. I downgrade to IE8 and installed Adobe reader 9.5 and the web document open perfect. I don't want to leave this computer with IE8 and AR 9.5 ,I want to work IE11 with AR XI 11.0.05 . Please some suggestions? Just as information I tried disabling ActiveX filtering but no fix. Please I need help. Thank you
Thank you Pat Willener. This Microsoft solution really worked for IE11 (I did manually). Now I have Win 7 Pro 64-bit with IE11 and AR 11.0.5 running perfect. Thanks again to you and I am glad that I joined this forum.
-
I have an I Mac june 2009 24" type 9.1 can I install win 7 pro 64 bit via bootcamp?
I had Win XP servicepack 3 installed via bootcamp. Recent OSX updates changed bootcamp and it supports now only Win 7.
I was not informed about this change.
So to be able to use my Win XP applications again I bought Win 7 Pro 64 bit OEM.
The Cd wil work until I have to install and format the new ceated partition.
I cannot choose between FAT or NTFS the installation continues and Woindows will be unpacked.
The counter remains on (0)
Nothing happens further
What is wrong?
PLS somebody with a solution?Has Apple the right to claim what an owner of an IMac may run on his computer and wat not?
Do we live in the former Sovjet Union? -
Dual Boot Win XP Pro 32-bit & Win Vitsa Ultimate 64-bit on same Hard Drive?
I have a Mac Pro with four HD's. One HD is running 10.5.4 and the another HD is running 10.4.11. The third HD is for Mac data storage. My fourth HD is for Windows. This fourth HD is currently running Windows XP Pro 32-bit edition (the entire drive is a single partition formatted as NTFS). Can I install Windows Vista Ultimate 64-bit edition onto this same partition? I would like to be able to use boot camp to start into either Windows XP 32-bit or Windows Vista Ultimate 64-bit. I suspect that boot camp can get me as far as the Windows bootloader and then I would need to select which Windows OS to load ino???
Has anyone actually successfully performed such a dual Windows OS installation using boot camp? This boot camp installation is also available with my Parallels installation. I am concerned that changing anything with break my ability to boot into Tiger (which I can right now) or my ability to load my XP pro system using Parallels.
Obviously my reason for wanting a 64-bit Windows system is to support more memory (2GB max limit that is well documented for Windows installs using the Apple Boot Camp BIOS emulator).
Thanks,
Thomas01Bora wrote:
Then you should be able to drop Vista on there...just a thought.
Hmm I have to say, that's what I was trying to do with my single Xp installation:
-Create a slot for it (partitionned FAT32)
-Then "drop" (install) Xp using the normal Xp installer
The whole process without using boot camp.
It looks like your case, your Xp installation being my OS X, your Vista being my Xp.
But it really didn't work at all. When choosing a partition to install Xp on, I just don't see my FAT32 space. Instead I see the whole drive as an unknown partition (mac partition are unknown to Win).
So really Boot Camp does something else other than just partitionning, partitionning like I would do it with Disk Utility (which I did).
Any idea?
Message was edited by: Armaguy -
Why wont my .vst plugins work in cs6 on win 7 pro 64 bit
why wont my .vst plugins work on my new os ,win 7 pro 64 bit, i have cs6 and cc installed, they worked fine when it was on xp pro.. even if it finds them and you can bring them up it crashes cs6, any advice is helpful, thanks!!
awb5151 wrote:
But i really want them to work in cs6, i heard you have to use j bridge to use .vst's in cc, is this true..
Yes.
I just dont understand why they wont work in win 7 pro 64 bit , is it an os problem or is it a cs6 problem, when i had cs6 in win xp pro, was it installed as a 32 bit program, if thats the case can i load a 32 bit version of cs6>>>??? thanks!!
It's not the OS - W764Pro can run 32-bit software fine in emulation. Your problem is that there is no 32-bit version of CC. It was widely circulated before release that this was going to be 64-bit only, and that you would need bridging software to run old 32-bit VST plugins.
Apparently, jbridge works fine once you've got it installed and everything in the correct place. I wouldn't know though, because I don't use it - I only use a small number of 64-bit plugins directly. On those few occasions that I want to use a 32-bit plugin, I run it in CS6 Audition (which isn't the CC version, but is 32-bit). So yes, if you have the 32-bit program you can run them in that. Both versions of the software will co-exist quite happily on the same machine, and won't interact at all - except that you have to be careful with your sound device settings. -
Installing VPN Client 5.0.07.0290 on Win 7 Pro 64 bit error 1720
Trying to install Cisco VPN client 5.0.07.0290 on new and clear Win 7 Pro 64 bit, I get error 1720. There is a problem with this Windows Installer Package.A script required for this install to complete could not be run.
I contacted Cisco support and they can´t help me yet. I am pretty desperate, been trying to get this done for a long time.
Somebody knows if perhaps any version of AnyConnect could help me?
Thanks in advance.
GuidoHello,
We came across the same issues. A system engineer found a site to change the MSI and after that we were able to install and distribute for 64bit systems.
http://blog.edwards-research.com/2009/09/ciscovpn-client-32-bit-vista-error-1720/
Regards,
Michael Heer -
Error code 50 Win 7 pro 64 bit
I received the desktop update notification, tried to update it and kept getting this error message:
I uninstalled the desktop app, tried a clean install and I still keep getting this error message.
I am also running another machine on Win 7 Pro 32 bit and I haven't had this issue.1) End all Adobe related process from Task Manager .
2) Open Control Panel and Navigate to Control Panel\Programs\Programs and Features .
Under Program and Features list, let me know whether you can see the option : Adobe Creative Cloud ?
If not proceed with below steps.
3) Open C:drive and navigate to C:\Program Files (x86)\"Common Files"\Adobe.
Open Adobe folder and delete folders named Adobe Application Manager and OOBE.
Navigate to C:\Program Files (x86)\Adobe.
Open Adobe folder and if present delete Adobe Creative Cloud folder.
4) Press Windows button (located between Ctrl and Alt buttons) along with R button together at a time , you will get a run command window.
Type in below command and hit 'Enter' key.
appdata
Then navigate to Local>Adobe.
Open Adobe folder and delete folders named AAMUpdater and OOBE.
Note : Disable Anti-Virus and Firewall temporarily
5)
Click on the below link and download Adobe Application Manager and install the same .
http://download.adobe.com/pub/adobe/creativesuite/cc/win/ApplicationManager9.0_all.exe
6)Once installed , it will create Adobe Application Manager shortcut icon on Desktop .
Double click on it.
It will start update process and gets updated to Creative Cloud. -
Running Windows 7 Pro 64 bit and Firefox has crashed at least a couple dozen times today and nearly as many yesterday. I've tried all of the suggested "fixes", to no avail. I just tried the Windows compatibility tool mentioned in one of the forum post and that didn't resolve the issue either. I'd love to add the links to my crash reports, but can not get to this page on the computer in question - any time I try to load any Firefox or Mozilla help page, forum, etc. in that computer, Firefox crashes (even when running Firefox in Safe Mode). Firefox also crashes on miscellaneous other pages now and then. Thanks in advance for any help anyone can provide!
In case it's helpful, below are the crash ID's for the four most recent crashes:
Crash ID: bp-cb4e51b6-4459-4f60-bc77-39f6f2130820
Crash ID: bp-cb4e51b6-4459-4f60-bc77-39f6f2130820
Crash ID: bp-3ae6e6da-e687-4755-8306-178b92130820
Crash ID: bp-275d980a-043a-48cc-9399-bcb532130820
I'm not sure how to get the
troubleshooting info from the computer in question into this form. I have saved the page to a file on my network, but when I try to paste the contents in the box below, most of the info is missing.The CrashIDs are what is needed. Do not attempt to attach or paste the reports.
#Run Firefox in safe mode does that prevent crashes ?<br/>[[Troubleshoot Firefox issues using Safe Mode]]
#Disable all plugins
#Repeat and this time try in Windows safe mode. use the F8 key <br /> http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7
So you are saying it works ok as long as you avoid certain pages such as this Forum. That makes me wonder if it could be malware that is blocking access to assistance.Run malwarescans with multipe and up-to-date tools.
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us! -
I need to know which update(s) I can apply to help stabalize the system.
Typing the body of the thread message in the title, huh? -)
I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit. Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help. Currently I am running Version 3.0.4 (322).
Only Apple could hamstring and tie Mac OS to Windows. There isn't any other than whether you can download the drivers into Windows (you can) but Apple puts a block on the installer setup even if your mac does not support it.
Windows 7 needs at least Boot Camp 3.1 and 3.3 is what you should already have. And you are not getting security updates if you don't have at least 10.6.8 as was pointed out. --- you arent using Software Update as you should. And you should backup and clone Mac (and Windows) as well.
You need Mountain Lion to use Boot Camp 5.x which supports Windows 7 & 8 and 64-bit.
I would upgrade to Lion if you can realizing that Rosetta and PowerPC are no longer supported though.
Mac 101: Using Windows on your Mac via Boot Camp
https://support.apple.com/kb/HT1461
http://www.apple.com/support/bootcamp/
Helpful Apple Support Resources (Forum Overview)
Boot Camp Support
Boot Camp Manuals
Boot Camp 5.0 Drivers
http://support.apple.com/kb/DL1638
Frequently asked question
http://support.apple.com/kb/HT4818
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdf
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdfcreate a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
The Boot Camp Assistant can burn Boot Camp software (drivers) to a DVD or copy it to a USB storage device, such as a flash drive or hard drive. These are the only media you can use to install Boot Camp software.
https://support.apple.com/kb/HT4569
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf
Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
http://www.apple.com/support/bootcamp/
Is there a download of the Boot Camp 5 Support Software if I'm not using OS X Mountain Lion v10.8.3?
Yes, you can download the Boot Camp 5 Support Software here.
http://support.apple.com/kb/DL1638
How do I use the Boot Camp 5 Support Software I downloaded from the web page?
The download file is a .zip file. Double click it to uncompress it.
Double-click the Boot Camp disk image.
Copy the Boot Camp and "$WinPEDriver$" folders to the root level of a USB flash drive or hard drive that is formatted with the FAT file system (see question below for steps on how to format).
Install Windows, leaving the flash or hard drive attached to the USB port of your Mac.
Installation of the drivers can take a few minutes. Don't interrupt the installation process. A completion dialog box will appear when everything is installed. Click Finish when the dialog appears.
When your system restarts your Windows 8 installation is done.
Note: If the flash drive or hard drive was not attached when you installed Windows and was inserted after restarting into Windows 8, double-click the Boot Camp folder, then locate and double click the "setup.exe" file to start the installation of the Boot Camp 5 Support Software.
How do I format USB media to the FAT file system?
Use Disk Utility to format a disk to use with a Windows computer. Here's how:
Important: Formatting a disk erases all the files on it. Copy any files you want to save to another disk before formatting the disk.
Open Disk Utility.
Select the disk you want to format for use with Windows computers.
Click Erase, and choose one of the following from the Format pop-up menu:
If the size of the disk is 32 GB or less, choose MS-DOS (FAT).
If the size of the disk is over 32 GB, choose ExFAT.
Type a name for the disk. The maximum length is 11 characters.
Click the Erase button and then click Erase again.
Which versions of Windows are supported with Boot Camp 5?
64-bit versions of Windows 8 and Windows 7 are supported using the Boot Camp 5 Support Software. If you need to use a 32-bit version, you need to use Boot Camp 4 Support Software, and you must use Windows 7. 32-bit versions of Windows 8 are not supported via Boot Camp. For a complete list of Windows OS support, click here.
Maybe you are looking for
-
Problem with gmail not working with apple mail..
Hi, i'm trying to set up a gmail account to the apple mail program on mac (still works in iphone and ipad). after many diffrent approaches, i think i have all the right setnings. But i still cant connect to the google IMAP, both with or without SSL.
-
How do I change the font size on the menu bar in Quicktime?
I have to squint and put my nose to the monitor to read it.It looks like it's about a 3 point font size. I don't see anything in the preferences for changing it, and I'd rather not change the resolution on my monitor. Thanks!
-
WRT310N as a "Wireless Access Point"
Hello, I am in the market for a wireless device to add to an existing subnet. I see many tutorials regarding routers as wireless access points, but I am not sure if this device will work. My plan is to connect one of the switch ports to an existing
-
i have reset everything and voice over still won't stop . Iv turned it off it has never been turned on . THis his by far is the worst apple product I own and I own over 7 different products Just me alone in my house there are numerous more . i now fo
-
Droid Incredible - Google Maps
Is there a way to clear the search history on Google Maps?