"VOX USB2.0 TV BOX" drivers for win vista

Hi there. I'm trying to install my VOX USB2.0 TV BOX on my Win Vista without success... Until now only got video working with Intervideo in win xp compatibility mode, but there's no sound :( the audio cable is connected on the mic in plug. Anyone has the drivers for Vista? I cannot find them on the msi website..
Thanks in advance.

Quote
the audio cable is connected on the mic in plug
It should be connected to your 'Line-in' connector. What mainboard/soundcard are you using? Make sure that input is selected as default Recording source in Control Panel, and is not muted.

Similar Messages

VOX USB2.0 TV BOX Pixelated TV picture

I am runing Windows XP SP1A, Direct X9 ( not b yet) and VOX USB2.0 TV BOX .
Everything is fine EXCEPT the TV picture is very pixelated.
I have downloaded and installed all new drivers for Tv Tuner and graphics card etc.. but makes no difference.
I know it can be better than this because when I first installed it it was really good. Then I have had to reload the PC and since then a pixelated TV image.
Any helpful suggestions very much appreciated.

Everything is fine with my card as well except that the framerate drops down to 12FPS after the first run. (The first time after i install the drivers i get 24FPS)
MSI vox usb2.0 framerate problem That's my thread.

In which boot camp support software I can install the drivers for win 7 32 bit.my os is X10.8.5 and I install windows 7 32 bit but I can not install drivers

in which boot camp support software I can install the drivers for win 7 32 bit.
my os is X10.8.5 and I install windows 7 32 bit but I can not install drivers.
also my macbook pro model is MC723.

Read this. You need to be running Snow Leopard or later.
http://support.apple.com/kb/ht3986

Vox usb2.0 tv box compatibility

Am thinking of buy a vox usb2.0 tv box. My PC only contains usb 1.1 interfaces. Does the usb2.0 tv box work properly with that interface or does it require usb2.0?

Quote
the audio cable is connected on the mic in plug
It should be connected to your 'Line-in' connector. What mainboard/soundcard are you using? Make sure that input is selected as default Recording source in Control Panel, and is not muted.

MSI GX-700x DRIVERS FOR WIN XP HOME SP3

MSI GX-700x DRIVERS FOR WIN XP HOME SP3
PLEASE LINK

Quote from: herman.design.studio on 27-August-13, 05:37:17
uz jsem tam kopnul zase win7 64bit profesional na to drivery sou dik
Use English please.

Drivers for Windows Vista 64-bit on Satellite L300-1AM

When I can get drivers for Windows Vista 64-bit? Or I need to intall 32-bit drivers on my 64-bit Vista operating system?
Please links ;)

[Toshiba - Download Drivers|http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]
In the Drivers Search Page (the link above) select these filters:
_Product type:_ +Notebook+
_Family:_ +Satellite+
_Product Series:_ +Satellite A Series+ (don't try the L series if you want to find anything useful)
_Operating System:_ +Windows Vista 64 Bit+
_Country:_ +World Wide+ (you have to select this in order to get rid of those multiple country options available for the modem)
_Language:_ +English+ (obviously)
Don't modify any other filter. The results will be about 100 (maybe more, but the site is set to show up to 100 results).
Advices:
1. Download the latest versions only (there's no point in downloading multiple versions of the same driver, yet they will be shown in the search results area)
2. Download what's specific to your laptop only (network - RealTek, both wired and wireless; chipset and graphics - Intel; modem - Toshiba; webcam - Chicony; there's no point in downloading anything from otehr vendors - except maybe the touchpad, but Windows can handle it properly without aditional drivers)
3. Don't download any BIOS or Firmware file; they might not be for your notebook, and installing the wrong ones is a sure path to screwing up your notebook (and losing the warranty); if you need them upgraded, go to the download page for your specific model, Windows XP or Windows Vista 32 Bit drivers (since they are OS independent anyway)
Toshiba utilities (DVD Player, ConfigFree, etc.) should be OK too (again, download the latest version only).
BTW, I own 2 Toshiba notebooks (L300-1AM and L300-1AN; quite similar, the differences are in HDD and CPU only) and I had the same problem: no 64-bit drivers (and the same "support"). Quite strange the idea that Toshiba is testing these 64-bit drivers before releasing them (according to a previous post), since the same drivers, for the very same chipsets - but installed on other models - are available. Windows Vista 64-bit is out on the market for nearly 2 years now, the production of these models has already been stopped (and I assume they have not been produced during one night only :) ), yet they had no time to test the drivers... High-class support from Toshiba!

Where is the custom stamp location in Acrobat 9 Pro for Win Vista

Where is the custom stamp location in Acrobat 9 Pro for Win Vista?

See this thread to find out how to determine the location:
http://acrobatusers.com/forums/aucbb/viewtopic.php?id=17521

Need BootCamp Drivers for Windows Vista!

Hi Guys, I lost my bootcamp installation disk for the Windows Drivers. I have OSX 10.6.3 and boot camp 3.0.2 on an imac G5 Intel duo. Please help me, I need drivers for Windows Vista . Thanks

have you looked on the bootcamp install list?
http://support.apple.com/downloads/#macoscomponents

How to install Macbook Pro OS 10.4.8 with BootCamp2.0 for WIN Vista Biz?

Please advise how do I install Macbook Pro 17" OS 10.4.8 with BootCamp2.0 for WIN Vista Business? I need urgently to install these softwares onto my new HDD 500GB due to faults (bad sectors, etc) of the original 250GB HDD.
Can I use the original Apple DVD 1 & DVD 2 for Apple OS to boot up the Macbook Pro's new HDD?
Highly appreciate any advice from themembers of Apple Support Communities
Alex Lian

It depends on the model MBP you own. Early 2008 only addresses up to 6GBs.. and then it goes up from there model to model.
See OWC and http://www.macsales.com for assitance on deciding how much.. If you plan to run Parallels and Windows as a VM, or do video editing etc. you'll probably need more memory. Otherwise mende1 is correct.

Oracle for Win Vista

Which oracle software do you download for Win Vista 32 bit

http://www.oracle.com/technology/software/products/database/index.html
If you want 10g Release 2, find the 'Vista' specific one. Anything newer than 10g R2, use the generic Windows one.
Remember that you need Vista Buisiness or Ultimate - using Vista Home will have issues and questions related to Oracle on Vista Home will likely be met with 'we told you so', laughter and derision.

Satellite A200-1GB ( PSAE6E) Can't find drivers for Win 7

Help me guys :( I can't find any drivers for windows 7 :S
where i can found the drivers ?!

Hi mate
Akuma is right. Since Win 7 is not finally released, you will not find the Win 7 drivers.
But as mentioned the Toshiba US page provides some Beta Win 7 drivers for different notebook series its worth a try
Furthermore you could try to install the Vista drivers using Win 7 OS.
Usually the Vista drivers (but not all) should be compatible with Win 7.
Cheers

HP deskjet 1220c prints perfectly on WIN 98... BUT need drivers for WIN XP

HP deskjet 1220c prints perfectly on WIN 98... YES I have a new computer with WIN XP...
BUT... can not find any printer drivers for the HP1220c... NEED HELP... THANKS...
ALSO... is there a way to just print TEST PAGE when the printer come on... without computer.
[email protected]

Is this what you are looking for:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=se&prodNameId=19142&pr...
Message Edited by C0mdrData on 05-25-2009 07:44 AM

HP LaserJet P1505 Drivers for Win 8

I have a new computer with Win 8 and my HP LaserJet P1505 printer does not work because of missing drivers. Does anyone know where i can get drivers for this printer for Win 8 or do I have to buy a printer that is not HP?
Thanks Paul

Hi Paul,
I afraid the P1505 currently not yet supported on Windows 8.
According the official statement a driver should be available till the end of 2012, I would believe it will be a bit dilayed and will become available in several weeks.
Please check the following link in the near feature, as soon as the driver will become available you will be able to download it from that page.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Can I use WIN 8.1 drivers for WIN 7 ?

I have HP Pavilion Notebook - 15-p147ne
it is coming with windows 8.1
I've installed widows 7 on it, coppied the drivers from win 8.1
now when I installed the drivers on win 7 , it keeps telling me that these drivers may crash the system
I continued the process >> updated the drivers after installation
windows is now working
The question is
Are these drivers (which are extracted from windows 8.1) will affect the hardwares of the PC ??? even if they are not designed for win 7 ?
will there be any problem in the performence ?

Hi:
If the drivers are working, then you can reasonably expect them to continue working.
If you ever have a problem with the performance or drivers, etc., you can use all of the W7 x64 drivers and software from this model on yours except the BIOS and firmware files).
http://support.hp.com/us-en/product/HP-Pavilion-15-p000-Notebook-PC-series/6936226/model/7174371/dri...

Sorry still in trouble with corrupt drivers for Win 7 ....

Hi i have an early 2011 Mac Book Pro. I installed Win 7 (using boot camp) and Win 7 just about works OK, but of course it is missing the correct drivers, which i thought were available from the Mac OS X disc, obviously not from the Mac Application drivers disc.
So then i asked the question on the Forum, where it was suggested because i have a fairly recent Mac Book Pro i should download and burn to Disc the correct drivers by running Boot Camp. When this is done simply run the SETEUP.EXE file in Windows 7 and it will all be sorted !.
Sadly it doesn't and isn't, i run the SETUP.EXE file and i am presented with two options ....
1. Remote Install Mac OS X
2. DVD or CD Sharing
i do believe according to the instructions i have read elsewhere there should be 3 options, the first option should be ... Install MAC drivers for Windows 7 !!!!
So please can someone help me out here ?.
Tim

It shouldn't require pounding the answer over and over. it shouldn't even require using OS X DVDs. Or typing the same answer on the keyboard multiple threads and times. It SHOULD either just be an independent download, or "FIX" whatever that 10.6.6+ 'featue" in Boot Camp Assistant. An additional chapter in the Boot Camp for Windows install PDF Guide.
the troubles are not with Windows my dear Dr Watson at all, no sir. They are in the guide, self-inflicted, left out of the guide, lack of reading the guide, and there are 100s of articles that belong under and in the Apple Support product page for Boot Camp (and weed out the stuff that is old, and have a link to sub-category if needed, and a "NEW Support Articles" addition. Which of course only .001% check to see.
Like this tidbit from a week ago:
Resolving issues with Windows when using Apple Magic Mouse or Apple Wireless Keyboard
Belong listed -
Apple Support Boot Camp
And having all "knowledge" base articles on everything made that harder to wade through than before it ballooned to take in all the devices and products (not just "mac"). Which you or I would almost have to check a couple times a week.
Apple KB articles

"VOX USB2.0 TV BOX" drivers for win vista

Similar Messages

Maybe you are looking for