VOX USB2.0 TV BOX Pixelated TV picture

I am  runing Windows XP SP1A, Direct X9 ( not b yet) and VOX USB2.0 TV BOX .
Everything is fine EXCEPT the TV picture is very pixelated.
I have downloaded and installed all new drivers for Tv Tuner and graphics card etc.. but makes no difference.
I know it can be better than this because when I first installed it it was really good.  Then I have had to reload the PC and since then a pixelated TV image.
Any helpful suggestions very much appreciated.

Everything is fine with my card as well except that the framerate drops down to 12FPS after the first run. (The first time after i install the drivers i get 24FPS)
MSI vox usb2.0 framerate problem   That's my thread.

Similar Messages

  • "VOX USB2.0 TV BOX" drivers for win vista

    Hi there. I'm trying to install my VOX USB2.0 TV BOX on my Win Vista without success... Until now only got video working with Intervideo in win xp compatibility mode, but there's no sound :( the audio cable is connected on the mic in plug. Anyone has the drivers for Vista? I cannot find them on the msi website..
    Thanks in advance.

    Quote
    the audio cable is connected on the mic in plug
    It should be connected to your 'Line-in' connector. What mainboard/soundcard are you using? Make sure that input is selected as default Recording source in Control Panel, and is not muted.

  • Vox usb2.0 tv box compatibility

    Am thinking of buy a vox usb2.0 tv box. My PC only contains usb 1.1 interfaces. Does the usb2.0 tv box work properly with that interface or does it require usb2.0?

    Quote
    the audio cable is connected on the mic in plug
    It should be connected to your 'Line-in' connector. What mainboard/soundcard are you using? Make sure that input is selected as default Recording source in Control Panel, and is not muted.

  • Vox USB 2.0 TV Box Pixelated distortion

       Greetings,
       I recently purchased your VOX USB2.0 TV BOX.  I don't believe I have ever had a harder time with getting something that is supposed to be so simple to simply work.  After installation and driver installation + updates from your site.  It still did not resolve my issues.  Tried on 3 different computers with the same results.  The device gives me a horrid resolution.  Its so pixelated that you can-not make out any words at all.  And that is just the video-in.  The TV in is probably worse, I see practically nothing but snow and distortion.  I can tell that it is receiving the certain channels that I would watch on a regular TV, but its too horrid.  
      Any advice on how I can resolve this problem?  Thanks.
     :wall:Zak:wall:
    P.S.  Please reply to [email protected] if you don't mind.  Thanks again.

    Quote
    Have you tried checking all the audio settings to make sure sound isn't muted somewhere on line in?
    This should not matter.   The volume level of LINE-IN, yes, but the muted status?  No.  The VOX software takes control of the mute status on LINE-IN to control the signal input from the VOX.   Kind of a crappy design decision, as it means that the LINE-IN has a CONSTANT audio signal coming in, and if there's a glitch that kicks off LINE-IN's mute, you'll be  blasted by whatever audio is coming off the VOX at max volume.  When you deactivate the tuner software, it's supposed to reactivate the MUTE.
    So, having MUTE on is perfectly normal.

  • VOX USB2.0 has no TV picture on Radeon 9100

    Expecting that MSI VOX USB2.0 TV tuner will be great solution for me (easy to exchange between PC and notebook) I was surprised founding that it can't work on my PC with on-board Radeon 9100 graphics (9100 IGP chipset on Asus P4R800-VM motherboard). MSIPVS gets available channels regularly but there is no picture, some time I got some audio and that is all. Noting can solve my problem; I have replaced all the drivers (Vox and Ati) with latest but without results.
    Please help. Any suggestions?
    Thanks,
    Cvijetic

    I gave up on the Vox and decided to buy a Hauppauge PVR-350 instead. Unfortunately the PVR-350 also has some flaws (looks like many boards have a design-flaw that gives crappy sound and picturesound latency). After reading on a Hauppauge-forum that I was not the only one I returned the board and got a Hauppauge PVR-250 instead, which reportedly works much better. I can confirm that it did :-)
    I now use it for all my tv watching and recording, and since it's even supported by MythTV I'm going to use this card for my homebuildt PVR.
    Obviously, you DO get what you pay for sometimes. :-/
    Nigritude Ultramarine

  • Vox USB2.0 TV-tuner: bad picture, no sound, external power needed?

    Product: MSI Vox USB2.0 TV-tuner
    Part No: G52-V2TVX04
    Bought: http://www.komplett.no
    Location: Oslo, Norway (PAL TV-system)
    Hardware: IBM Thinkpad T40 (laptop)
    Software: Windows XP Pro
    Problem description:
    The picture has weird (almost pulsating) colors, and there is no sound. Does not help if I change the PAL-standard to something else. I want to see if it helps with an power adapter but I need to know the voltage required.

    I gave up on the Vox and decided to buy a Hauppauge PVR-350 instead. Unfortunately the PVR-350 also has some flaws (looks like many boards have a design-flaw that gives crappy sound and picturesound latency). After reading on a Hauppauge-forum that I was not the only one I returned the board and got a Hauppauge PVR-250 instead, which reportedly works much better. I can confirm that it did :-)
    I now use it for all my tv watching and recording, and since it's even supported by MythTV I'm going to use this card for my homebuildt PVR.
    Obviously, you DO get what you pay for sometimes. :-/
    Nigritude Ultramarine

  • Grey boxes instead of pictures in pdf

    All pictures in my pdf is grey boxes instead of pictures - what's wrong?
    I use Acrobat 9 Pro (just startet with cs4).

    Hi Bad AD,
    Doubt you still have this issue but the quick fix to being able to view the document is to go to:
    Acrobat
      >Preferences
         >Documents
           >Find the Header:
                   PDF/A View Mode
                   View Documents in PDF/A mode:  Make picklist value: "Always"
    This should resolve it. 
    PDF/A mode is the international standard for long term document archiving. If you are interested in learning more about it, Click here to go to Wikipedia's explanation.
    Hope it helps for you and anyone else who gets this message!

  • Some of the apps previously downloaded have now become blank - white box instead of picture. Name of app still appears. Have tried hard reboot and sync to make sure everything is up to date. Anybody ever had this? How can I fix?

    Some of the apps previously downloaded have now become blank - white box instead of picture. Name of app still appears. Have tried hard reboot and sync to make sure everything is up to date. Anybody ever had this? How can I fix?

    One more thing to try.  Double click on the home button.  Scroll in that bottom line of icons (swipe finger to left) to the app that are all white.  Hold your finger on the app until the - sign appears.  Tap it to close the app.  Hopefully it will then show up correctly.  (As they say about chicken soup curing a cold, "can't hurt")

  • Received main contains a ? in a box instead of picture

    Why do I get a ? in a small blue box inside of a bigger box, and no picture, when the mail contains pictures?? This is coming from a gmail account being mailed to me in my Mac.com account.

    Same issue here- Receivngin emails with jpgs attached but they are not downloading or appearing in the mail body. I also have checked the preference box to load them
    any help appreciated

  • MSI vox usb2.0 framerate problem

    Hi.
    I'm having a problem with my external USB2.0 tuner box.
    Right after i have installed the driver, it works nicely, and i get ~25fps on the tv (the CPU load is 40%), but when i do anything (like change the video input), the framerate goes down to ~12fps (and the CPUload down to 20%). Now the fps stays there, and its not nice to look at tv with 12fps. If i use the built-in video-recording function in InterVideo MSIPVS, and start recording, the framerate goes back up to 25 again!! But that's only while recording, cos when i stop recording, it drops down to 12.
    What the heck?  
    Can someone help me?
    System specs:
    Compaq Presario R3000 notebook with AMD athlon xp mobile 2800+
    ram: 256mb, graphics card: GeForce 4 420 Go, OS: Windows XP Home.

    Nobody from MSI views this forum. It is strictly user-user. If you need to cotact MSI, use the links from here
    http://www.msi.com.tw/html/about/contact2.htm

  • Vox usb2 xp64?

    is there likely to be an xp64 driver for the vox usb2   

    Quote from: Doctor Stu on 17-May-05, 04:41:12
    How to contact MSI.
    go for it! the more people that ask MSI about 64bit drivers, the quicker they will make them!
    Emailed em    if i get a reply i'll post it (if i remember lol)

  • Reso probs with MSI VOX USB2.0 BOX

    Well well...
    Basicly my problem is that I cant record well with the vox box. I try to record my pc desktop with it thru a s-video cable but I cant change the resolution higher from 480*576 with the only propper Color format/compression YUY2. When i try to set a higher reso iuVCR gives the following error; Unable to set selected format! and other recording progs give a samekind error.
    I've reinstalled the drivers over 20 times(latest version), tried different recording proggies and etc I have also tried it in my other computer but same prob.
    I am also using the external powersupply which came with the vox to make sure its getting enough power...
    Still I cant record with a decent resolution/quality...I'd appriciate any tips&tricks to make this work
    PS. sorry for my poor english   
    /Thanks in advance

    Quote from: Stu on 05-May-06, 07:13:57
    because your tuner is "software driven" and your computer is handling the encoding and rendering of the video output, and to do that it requires suitable codecs. if the software is trying to use an incompatible or corrupted codec, then you won't get any video output
    unfortunately thats the only place to start. add them one by one, until you find out the one thats causing the problem. from my experience, too many codecs spoil the video viewing, K-Lite has pretty much all the codecs you'll ever need
    Well that wasnt the problem I tried the capture on another computer that doesnt have any codec packs installed.
    sjfm might be right...This doesnt appear to be a software problem...
    Oh well I think I have to buy a new tv-card :/

  • Problems with vox usb2

    I have new motrerboard MSI k9 neo and a64 3200 and ati 1600 pro 256 mb ram. when plug box usb 2 do not have picture. I install newest drivers and msipvs3.

    win xp sp2. On old mashine is work fine. Old comb is abit nf7s nforce 6600 256 mb. New is that with k!tv vox usb work fine but whitout sound.

  • Vox usb2 remote?

    as to my other thread i was having numerious problems with my usb2 vox tv box  but installing msipvs3 has signifcantly improved things however i cant seem to get the remote or teh jog dial to do anything  did i miss something i need to install to get it to work 

    Quote from: lance8 on 20-February-05, 02:14:00
    Hey ffuulkerth,
    I'm running msipvs version WinDVR 2.0.34. Where did you get version 3.
    Thanks much!
    It is in the forums list at the top as
    ** New MSIPVS - download and leave feedback please **
    https://forum-en.msi.com/index.php?topic=73312.0
    Follow the directions in that post.  It is just a test version,
    but it is far better then version 2. 
    I'm here if you need more help.
    -cope

  • MSI VOX USB2.0

    I have purchased this nifty little piece of equipment and really enjoying the picture etc from it. I have one question and it might take a while to explain it.
    I can only view the channel that is currently on my television while using my Tuner Box, am i missing something? I know you can do the channel surfing  etc i am wondering if someone can help me. I get an absolutely cracking picture from the box itself and i would like to now go on to learn how to use the Scheduling and surfing features to really start recording material.
    I would be most grateful if someone could go through how they are setup i.e. in the Setup option from the panel, so i could maybe copy it to see if i could have any success.
    Any help much appreciated, P.S. I am in the UK on PAL_B.

    i downloaded the manual for the Vox before, and there wasn't much info with it. if there are no instructions for MSIPVS with your Vox, then i recommend you visit this link http://www.msi.com.tw/program/support/download/dld/spt_dld_detail.php?UID=460&kind=10 and download the TV@nywhere Master manual ("TV Series 4.0"), which contains full instructions for using MSIPVS

Maybe you are looking for

  • How do i add an iPod Touch iMessage contact to my iPhone 4s

    I have an iPhone 4s. My son has a new 4th Gen iPod touch. On the iPod touch, i added a new contact, so my son could send me an iMessage. That was all setup without any issues. I then did the same on my iPhone 4s, but then i came across a bit of a pro

  • Unable to release invoice to accounting

    hi all When i try to release a billing document to accounting in VFX3, i get the below error , " F5350 "Account type/account for invoice reference does not match item". Can anyone suggest any possible solution / application of notes for resolving thi

  • The "pac man" theme song is playing in a loop when I open Firefox

    When I open Firefox on my home pc (not laptop) the pac man theme music plays in a loop. == This happened == Every time Firefox opened == an hour ago

  • Company logo not displayed in preview only for few users

    Hi to all. i inserted a company logo in a sapscript with se78 transaction. The most of user are able to preview and print the document with the logo. Few users ado not see the logo both in preview and in printing. I checked the su53 for these users a

  • Keychain activation code won't come through?

    I've been trying to setup keychain for weeks. Everytime I try it asks for my 4 digit passcode which I enter and to sign in which I do. The it says please enter the activation code sent to +44**** ****77. It may take a few minutes for this to arrive..