Voyager 220v and Homehub 2 connection
I would like to connect my old Voyager 220v to my HomeHub 2 (main router) as an access point elsewhere (outside HH2 wireless range) in my house. The V220v and the HH2 would be connected by domestic "powerline" connections
Is that possible? If so, how?
Tips, suggestions and "instructions for dummies" much appreciated!
Yes, if you follow my instructions on the following page, it will work. The Voyager 220V is very similar to the Voyager 2091.
Using an old BT Voyager modem as an additional wireless access point.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.
Similar Messages
-
Voyager 220v Router - How to connect 2nd. computer...
I have already installed the USB drivers from the setup CD and my main computer is successfully connected via the USB port on the 220v Router.
I now want to add a laptop and I understand that this can just be directly connected using the Ethernet cable without needing to install anything else. So the setup CD does not need to be inserted in the drive.
Is this correct?
Can I insert the Ethernet plug in the router socket without having to switch the router off?Thanks John.
Just one query arises from your answer though. You say connect both by ethernet for better connection but the Voyager 220v only has one USB port and one Ethernet port.
On the BT Business Forums someone asked the same question and a BT Employee said to use the other computer connected to the other port.
BT Business Forum
The other computer I want to connect to the ethernet port will be in the region of 10 to 15 metres away using an extension lead with coupler so that will have to be on the ethernet port anyway to avoid loss of signal. -
Adding wireless capability to Voyager 220V
My father has a Voyager 220V router - can I call it a router as it connects to only a single PC? Anyway, I would like to know how to add wireless functionality to it. If it had more than one network port, i.e. what I would expect a router to have there would be no problem - I'd add a Netgear wireless hub. So, all suggestions would be welcome. Richard
Struggling wrote:
Presumably he could use any (proper) router in place of the Voyager - at the cost of losing the VOIP functio?
What would those WiFi laws be then?
The point of adding wireless capability is to make use of the portability of my mother's new laptop. I don't fancy installing CAT5 and sockets throughout every room of their house - it was bad enough doing it in my own place.
Richard
You could try adding a DSL router as per my previous link but if the new router isn't fully compatible the VOIP system may not work anyway.
Make sure if using Wifi to use WPA2-PSK encryption with a strong passphrase.
This link may be helpful.
https://www.grc.com/passwords.htm
As for Wifi & up & coming Laws try this phrase in any search engine "Digital Economy Bill wifi".
"I have this awful feeling someone is watching every move I make (one of my pet hates is router location tagging)." Marvin (A paranoid Android) -
if i bought my ipod touch 32gb in germany where the voltage is 220v and i live in America where the voltage is 110, i will have to wait to get to my home to charge it for first time or I can charge it here and change the voltage of the battery in America?
please i need help, im worried that if I connect my ipod here, it will burn or sometihng bad.Just connect it to a computer's USB port.
Most wall chargers are dual voltage (110- 220 volts) and only require a plug adopter. Check the wall charger to see if yours is. -
BT FON Laptop and Android phone connection
Can anyone help I am trying to connect my laptop to my BT FON wireless connection that is advertised by my BT homehub2. The regular wireless is working and I can connect without any problem, but when I try to use the BTFON or BT Openzone networks neither will work!
Tried following BTs instructions for connecting manually, connect to the network then use https://www.btopenzone.com:8443 in a browser and enter user name and password. But the laptop could not access the website.
The assigned IP address when connected to the BTFON network is 196.254.35.219, subnet 255.255.0.0 but no gateway?
To add to this i can't get my android phone to connect using these wifi networks, again I have no problem connecting with the regular wireless from the homehub. The phone trys to connect and it says an IP address is being allocated but it times out then trys again.
Any ideas?
ThanksHi Nawn
If you are still having difficulty connecting to the Fon and Openzone network id's send us an email usig the contact us form address in my profile. You can copy the form address from the section 'About Me'.
Thanks
Stuart
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-) -
Blackerry Playbook and Homehub 3
Hey everyone, new to the forums, but thought this might be the best place to get a bit of advice
Just got a Blackberry Playbook today, its pretty cool, but having some problems with wifi connections... I have BT Infinity with a Homehub 3, and initially I had a bit of a problem getting the Playbook to connect to the homehub, but after resetting the homehub it connected no problem.
It was working fine for a few hours and now its disconnected again, I was wondering if anyone had a solution to why it keeps disconnecting? When I go into "wifi" on the Playbook, my network shows up with no problems, but doesnt connect... it also says the network is "open" and doesnt require a password, but it does have WPA2 protection.
Any advice would be greatly appreciatedHey, thanks for the reply guys. Oh I got mine from currys for £169 very pleased with it, its a great little device I have had it working with the internet, but the connection seems to "time out" when i don't use it for an hour or so... Sometimes it works again just by turning the wifi on the playbook off and then back on again, but other times it won't work at all, it just says the Hub3 is an "open" network and it can't connect to it.
Im going to try and delete all Hub3 data and comnect with the WPS, I did try the WPS function a few times, but it wouldn't get past the IP allocation stage.
I had thought about changing to WEP, but there are a lot of devices in my house running off the wifi, the rest all work fine, so don't want to risk disrupting them just for the playbook.
I was wondering if other devices in the house could disrupt the playbooks connection? I sometimes think theres far too many wifi devices in our house :/ -
Hi
I need a document regarding "creating voyager workspace and related voyager connection" using OLAP Connection or cube..
Would anyone get me out of it ? Any suggestion would be highly appreciated.
I am using Business Object Release 3.1 (Edge series)
ArifHi
I need a document regarding "creating voyager workspace and related voyager connection" using OLAP Connection or cube..
Would anyone get me out of it ? Any suggestion would be highly appreciated.
I am using Business Object Release 3.1 (Edge series)
Arif -
Removing BT Talk from BT Voyager 220v
Hi,
does anyone know how to remove BT Broadband Talk from the BT Voyager 220v Router, I received instructions with a link in an email from BT but the link did not work.
I found instructions for a home hub, but not the voyager, can anyone help me out.
I am told removing the facilty assists with bandwidth speed.
Thanks
Tonibell1tonibell wrote:
Hi,
does anyone know how to remove BT Broadband Talk from the BT Voyager 220v Router, I received instructions with a link in an email from BT but the link did not work.
I found instructions for a home hub, but not the voyager, can anyone help me out.
I am told removing the facilty assists with bandwidth speed.
Thanks
Tonibell
A factory reset will remove it, but it does not take any bandwidth unless you are on a call, and then its is only a very small amount.
Do you have a speed problem?
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones. -
ok so we bought an ipod touch for my daughter and when she connected it to the computer after she downloaded itunes, she was asked if it was her ipod or a new one, so she clicked on her ipod and lost all her recent pics plus is unable to locate the app store on her safari on her ipod touch. any suggestions as to what went wrong or what should be done ? should we restore or what?
much appreciated if there is anyone else who had this happen to them.- The iPod got erased since it sounds iTunes identified that the iPod has been synced with another computer and she said yes to making this computer her syncing computer. It could also she restored the iPod from the backup of another iPod, iPhone or iPad that was in iTunes. If in iTunes you go to Preferences>Devices is there a backup listed for her iPod with a date/time when she first connected the iPod to the computer. If so then restore the iPod from that backup.
iOS: How to back up
Note synced media like apps and music are not included in the backup,
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
- Regarding the App store. The App store is not in Safari. It is a separate app. Also, could the Apple store be hidden by Restrictions? Settings>General>Restrictions. Further, can you find the App store via the Spotlight search on the iPod? -
I installed windows 7 to my macbook pro, but my mousepad does not work in windows 7 and also i can not connect my windows 7 to projector, but i can use my macbook's mouse pad and i can connect my mac to projector,so please help me for windows 7 problem
i try to download now, do you think when i download and install the windows support software, can i fix the problem?
-
I have a black Macbook 4,1 running 10.7.5, an iMac 11,3 running 10.7.5 and a new Macbook Air 6,2 running 10.9.5., I have file sharing turned on on all machines. All machines are visible and I can connect all machines except for the Macbook Air. The Macbook air can see the other 2 Macs but does not connect to either of them or even give me the option to connect as a guest or a registered user. The other Macs connect to the Macbook Air but it will not connect with them. Any help is appreciated. Thank You.
The warranty entitles you to complimentary phone support for the first 90 days of ownership.
-
I'm having some difficulty updating a table in my powerpivot data model. The data for the table is stored in a local excel file; if I go to
Existing Connections select the connection and do a test then everything is successful. When however I try to refresh that particular table I get the following error:
"We couldn’t refresh the connection. Please go to existing connections and verify they connect to the file or server."
In the past I had this and it was an authentication issue, the files are stored on SharePoint and I wasn't logged in to Sharepoint - I have however checked this and it can't be the issue because I have other tables linked to other excel files in the same
location that are refreshing without issue. Can anyone think of what may be causing it?
I have even tried creating a new local excel with the same data, added it to the data model and then tried a refresh and I I get exactly the same issue.
Are there any known issues with refreshing data from an Excel file if, after the initial import, you add columns to the table in the excel file I was wondering if this might contribute?
ThanksHi Maracles,
Thanks for your post.
From your description, I tried to reproduce this issue on my test environment. However, everything is fine for me. Could you please post the specific version of SQL Server PowerPivot for Excel?
You can try to use a trace file to troubleshoot errors in PowerPivot. If this issue still persists, please try to reinstall SQL Server PowerPivot for Excel to see if this helps.
For more information, please see:
PowerPivot Options & Diagnostics Dialog Box:
http://technet.microsoft.com/en-us/library/gg399091.aspx
Using a Trace File to Troubleshoot Errors in PowerPivot:
http://www.sqlchick.com/entries/tag/powerpivot
Best Regards,
Elvis Long
TechNet Community Support -
HEY GUYS I AM USING AN IPHONE 3g and when i connect my device to my laptop a dialog box appears saying that an update of 4.2 is available so went for it.after the firmware is downloaded via itunes it shows that the firmware is invalid!.please help.
AND ALSO I HAVE HEARD THAT THE IPHONE 3G CANNOT BE UPDATED TO IOS 4.2!IS IT TRUE???
PLEASE HELP ME.This means that the phone you have was software unlocked to use on any carrier, or hacked. When you installed the update it restored the lock that originaly came with your phone. Not much you can do now. Apple will not support hacked phones. You will need to find out the carrier your phone is locked to and see if they offer official unlocking, or start googling to see if you can find a way to unlock 4.2.
-
I am trying to transfer pictures and music from my phone to my computer, and when I connect my phone, it says Device not installed correctly. I can not see my files or nothing. What can I do?
Try downloading these http://www.samsung.com/us/support/owners/product/SCH-I535MBBVZW
or searching for it here Verizon Wireless Cell Phones - Verizon Wireless Accessories | Samsung -
i just updated my iphone 4s with the new IOS6 update and now everytime i try to connect to my wifi it brings me to the apple page and will not connect to the wifi at all.. someone please help
I have the same problem, no way to change the old username in icloud on my ipad after update to ios7. Enybody knows a solution or where to look for a solution?
Maybe you are looking for
-
please someone who help me please when I tgry to drop a video from the main screen to a time line with no secuence i receive an error with no number, just tell me the progran stop working and the program closes
-
How do I see photo attachments instantly in my mac mail?
When I got my Mac a couple of weeks ago my photos would show up in the actual email, however now they don't. I have obviuosly changed some setting I dont about but now I am at a loss at how to fix it. Basically I need to click on "quick look" to view
-
More than one conequent in an association rule possible with SQL Developer?
Dear experts Is it somehow possible to show more than one element in the consequence? According to the article http://docs.oracle.com/cd/B28359_01/datamine.111/b28129/algo_apriori.htm#autoId2 it seems not to be possible: "Oracle Data Mining supports
-
[Win]: Can't install ExtendScript ToolKit 2 - Problems with an already installed E'Script T'Kit 2?
Hi I have problem to install ExtendScript ToolKit 2. I had installed ExtendScript ToolKit 2 and removed it with the Uninstaller. Now I want to reinstall it but it doesn't work. The setup says there is a conflict with the already installed ExtendScrip
-
Extending the Material from FG Material to Semi Finished good.
Dear All, I am doing the STO (INTRA COMPANY) from plant 1 to Plant 2 for FG While receiving the material in plant 2, I have to take as Semi finished good (SFG). Is it possible? Bcz the Material Type is FG in Plant 1, so we can't change Valuation clas